net: fsl_mdio: Fix busy flag polling register
PATCH 1/1 net: fsl_mdio: Fix busy flag polling register
NXP's mEMAC reference manual, Chapter 6.5.5 "MDIO Ethernet Management Interface usage", specifies to poll the BSY (0) bit in the CFG (we call it CTL) register to wait until a transaction has finished, not bit 31 in the data register.
In the Linux kernel, this has already been fixed in commit 26eee0210ad7 ("net/fsl: fix a bug in xgmac_mdio").
---
I only stumbled over this section of code while looking at something else, but I'm surprised this even works the way it is now. Maybe it's luck.
Sadly I have not yet had the chance to test this change on actual hardware, and I'm not sure I will anytime soon, so I'm asking whether there's anyone who could compile and run my code to see whether MDIO transactions work as expected.
Thanks!
Markus
drivers/net/fm/memac_phy.c | 2 +- include/fsl_memac.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
drivers/net/fm/memac_phy.c +1 -1
@@ -64,7 +64,7 @@ static int memac_wait_until_done(struct memac_mdio_controller *regs) {unsigned int timeout =MAX_NUM_RETRIES ; -while ((memac_in_32 (®s->mdio_data) &MDIO_DATA_BSY ) && timeout--) +while ((memac_in_32 (®s->mdio_ctl) &MDIO_CTL_BSY ) && timeout--) ;if (!timeout) {
include/fsl_memac.h +1 -1
@@ -246,6 +246,7 @@ struct memac_mdio_controller {#define MDIO_STAT_HOLD_15_CLK (7 << 2)#define MDIO_STAT_NEG (1 << 23) +#define MDIO_CTL_BSY (1 << 0)#define MDIO_CTL_DEV_ADDR (x) (x & 0x1f)#define MDIO_CTL_PORT_ADDR (x) ((x & 0x1f) << 5)#define MDIO_CTL_PRE_DIS (1 << 10)
@@ -254,7 +255,6 @@ struct memac_mdio_controller {#define MDIO_CTL_READ (1 << 15)#define MDIO_DATA (x) (x & 0xffff) -#define MDIO_DATA_BSY (1 << 31)struct fsl_enet_mac ;
Signature · 1 line
2.34.1
Quoted 60 lines · Markus Koch
NXP's mEMAC reference manual, Chapter 6.5.5 "MDIO Ethernet Management Interface usage", specifies to poll the BSY (0) bit in the CFG (we call it CTL) register to wait until a transaction has finished, not bit 31 in the data register.
In the Linux kernel, this has already been fixed in commit
26eee0210ad7("net/fsl: fix a bug inxgmac_mdio").Signed-off-by Markus Koch <[email protected]>---
I only stumbled over this section of code while looking at something else, but I'm surprised this even works the way it is now. Maybe it's luck.
Sadly I have not yet had the chance to test this change on actual hardware, and I'm not sure I will anytime soon, so I'm asking whether there's anyone who could compile and run my code to see whether MDIO transactions work as expected.
Thanks!
Markusdrivers/net/fm/memac_phy.c | 2 +- include/fsl_memac.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)drivers/net/fm/memac_phy.c +1
-1@@ -64,7 +64,7 @@ static int memac_wait_until_done(struct memac_mdio_controller *regs) {unsigned int timeout =MAX_NUM_RETRIES ; -while ((memac_in_32 (®s->mdio_data) &MDIO_DATA_BSY ) && timeout--) +while ((memac_in_32 (®s->mdio_ctl) &MDIO_CTL_BSY ) && timeout--) ;if (!timeout) {include/fsl_memac.h +1
-2@@ -246,6 +246,7 @@ struct memac_mdio_controller {#define MDIO_STAT_HOLD_15_CLK (7 << 2)#define MDIO_STAT_NEG (1 << 23) +#define MDIO_CTL_BSY (1 << 0)#define MDIO_CTL_DEV_ADDR (x) (x & 0x1f)#define MDIO_CTL_PORT_ADDR (x) ((x & 0x1f) << 5)#define MDIO_CTL_PRE_DIS (1 << 10)@@ -254,7 +255,6 @@ struct memac_mdio_controller {#define MDIO_CTL_READ (1 << 15)#define MDIO_DATA (x) (x & 0xffff) -#define MDIO_DATA_BSY (1 << 31)struct fsl_enet_mac ; --
Quoted 2 lines
2.34.1
Quoted 4 lines · Markus Koch
NXP's mEMAC reference manual, Chapter 6.5.5 "MDIO Ethernet Management Interface usage", specifies to poll the BSY (0) bit in the CFG (we call it CTL) register to wait until a transaction has finished, not bit 31 in the data register.
First of all, the CFG (Configuration) and CTL (Control) are two different registers so the '(we call it CTL)' part of your statement is false.
Indeed, the BSY bit is located in the MDIO_CFG register but that is not accessed through the mdio_ctl field as you used it in your changes. It's instead accessed through the mdio_stat field (the MDIO_CFG is called in some RMs as the Configuration and Status register).
Quoted 4 lines
In the Linux kernel, this has already been fixed in commit
26eee0210ad7("net/fsl: fix a bug inxgmac_mdio").
Even the commit that you referenced is using the mdio_stat field.
drivers/net/ethernet/freescale/xgmac_mdio.c +1 -1
@@ -79,7 +79,7 @@ static int xgmac_wait_until_done(struct device *dev,/* Wait till the MDIO write is complete */ timeout =TIMEOUT ; -while ((ioread32be (®s->mdio_data) &MDIO_DATA_BSY ) && timeout) { +while ((ioread32be (®s->mdio_stat) &MDIO_STAT_BSY ) && timeout) {cpu_relax (); timeout--; }
Please fix this up in a v2.
Thanks,
Ioana