Add trusted_for(2) (was O_MAYEXEC)
Subsystems (24)
v18 cover Add trusted_for(2) (was O_MAYEXEC)
Hi,
This new patch series moves some code (from sysctl.c to fs.c) to fit with the recent sysctl refactoring included in next-20220104. As a result, a new patch moves back the proc_dointvec_minmax_sysadmin() helper to sysctl.c to make it also usable by the new fs.trusted_for sysctl. I also increased the syscall IDs to align with the new set_mempolicy_home_node syscall. These are cosmetic changes and I kept the Acked-by and Signed-off-by from the original patches. I'd like to get one for the new patch moving proc_dointvec_minmax_sysadmin() though.
This patch series has been open for review for a long time and got a lot of feedbacks (and bikeshedding) which were all considered.
Andrew, can you please consider to merge this into your tree? Without reply and since I heard no objection, I'll go ahead and merge it in -next after the merge window closes.
Overview
========
The final goal of this patch series is to enable the kernel to be a global policy manager by entrusting processes with access control at their level. To reach this goal, two complementary parts are required:
* user space needs to be able to know if it can trust some file descriptor content for a specific usage;
* and the kernel needs to make available some part of the policy configured by the system administrator.
Primary goal of trusted_for(2)
==============================
This new syscall enables user space to ask the kernel: is this file descriptor's content trusted to be used for this purpose? The set of usage currently only contains execution, but other may follow (e.g. configuration, sensitive data). If the kernel identifies the file descriptor as trustworthy for this usage, user space should then take this information into account. The "execution" usage means that the content of the file descriptor is trusted according to the system policy to be executed by user space, which means that it interprets the content or (try to) maps it as executable memory.
A simple system-wide security policy can be set by the system administrator through a sysctl configuration consistent with the mount points or the file access rights. The documentation explains the prerequisites.
It is important to note that this can only enable to extend access control managed by the kernel. Hence it enables current access control mechanism to be extended and become a superset of what they can currently control. Indeed, the security policy could also be delegated to an LSM, either a MAC system or an integrity system. For instance, this is required to close a major IMA measurement/appraisal interpreter integrity gap by bringing the ability to check the use of scripts [1]. Other uses are expected, such as for magic-links [2], SGX integration [3], bpffs [4].
Complementary W^X protections can be brought by SELinux, IPE [5] and trampfd [6].
System call description
=======================
trusted_for(int fd, enum trusted_for_usage usage, u32 flags);
@fd is the file descriptor to check.
@usage identifies the user space usage intended for @fd: only TRUSTED_FOR_EXECUTION for now, but trusted_for_usage could be extended to identify other usages (e.g. configuration, sensitive data).
@flags must be 0 for now but it could be used in the future to do complementary checks (e.g. signature or integrity requirements, origin of the file).
This system call returns 0 on success, or -EACCES if the kernel policy denies the specified usage (which should be enforced by the caller).
The first patch contains the full syscall and sysctl documentation.
Prerequisite of its use
=======================
User space needs to adapt to take advantage of this new feature. For example, the PEP 578 [7] (Runtime Audit Hooks) enables Python 3.8 to be extended with policy enforcement points related to code interpretation, which can be used to align with the PowerShell audit features. Additional Python security improvements (e.g. a limited interpreter without -c, stdin piping of code) are on their way [8].
Examples
========
The initial idea comes from CLIP OS 4 and the original implementation has been used for more than 13 years:
https://github.com/clipos-archive/clipos4_doc
Chrome OS has a similar approach:
https://chromium.googlesource.com/chromiumos/docs/+/master/security/noexec_shell_scripts.md
Userland patches can be found here:
https://github.com/clipos-archive/clipos4_portage-overlay/search?q=O_MAYEXEC
Actually, there is more than the O_MAYEXEC changes (which matches this search) e.g., to prevent Python interactive execution. There are patches for Bash, Wine, Java (Icedtea), Busybox's ash, Perl and Python. There are also some related patches which do not directly rely on O_MAYEXEC but which restrict the use of browser plugins and extensions, which may be seen as scripts too:
https://github.com/clipos-archive/clipos4_portage-overlay/tree/master/www-client
An introduction to O_MAYEXEC was given at the Linux Security Summit Europe 2018 - Linux Kernel Security Contributions by ANSSI:
https://www.youtube.com/watch?v=chNjCRtPKQY&t=17m15s
The "write xor execute" principle was explained at Kernel Recipes 2018 - CLIP OS: a defense-in-depth OS:
https://www.youtube.com/watch?v=PjRE0uBtkHU&t=11m14s
See also a first LWN article about O_MAYEXEC and a new one about trusted_for(2) and its background:
* https://lwn.net/Articles/820000/
* https://lwn.net/Articles/832959/
This can be tested with CONFIG_SYSCTL. I would really appreciate constructive comments on this patch series.
[1] https://lore.kernel.org/lkml/[email protected]/
[2] https://lore.kernel.org/lkml/[email protected]/
[3] https://lore.kernel.org/lkml/CALCETrVovr8XNZSroey7pHF46O=kj_c5D9K8h=z2T_cNrpvMig@mail.gmail.com/
[4] https://lore.kernel.org/lkml/CALCETrVeZ0eufFXwfhtaG_j+AdvbzEWE0M3wjXMWVEO7pj+xkw@mail.gmail.com/
[5] https://lore.kernel.org/lkml/[email protected]/
[6] https://lore.kernel.org/lkml/[email protected]/
[7] https://www.python.org/dev/peps/pep-0578/
[8] https://lore.kernel.org/lkml/[email protected]/
Previous versions:
v17: https://lore.kernel.org/r/[email protected]/
v16: https://lore.kernel.org/r/[email protected]/
v15: https://lore.kernel.org/r/[email protected]/
v14: https://lore.kernel.org/r/[email protected]/
v13: https://lore.kernel.org/r/[email protected]/
v12: https://lore.kernel.org/r/[email protected]/
v11: https://lore.kernel.org/r/[email protected]/
v10: https://lore.kernel.org/r/[email protected]/
v9: https://lore.kernel.org/r/[email protected]/
v8: https://lore.kernel.org/r/[email protected]/
v7: https://lore.kernel.org/r/[email protected]/
v6: https://lore.kernel.org/r/[email protected]/
v5: https://lore.kernel.org/r/[email protected]/
v4: https://lore.kernel.org/r/[email protected]/
v3: https://lore.kernel.org/r/[email protected]/
v2: https://lore.kernel.org/r/[email protected]/
v1: https://lore.kernel.org/r/[email protected]/
Regards,
Mickaël Salaün (4):
printk: Move back proc_dointvec_minmax_sysadmin() to sysctl.c
fs: Add trusted_for(2) syscall implementation and related sysctl
arch: Wire up trusted_for(2)
selftest/interpreter: Add tests for trusted_for(2) policies
Documentation/admin-guide/sysctl/fs.rst | 50 +++ arch/alpha/kernel/syscalls/syscall.tbl | 1 + arch/arm/tools/syscall.tbl | 1 + arch/arm64/include/asm/unistd.h | 2 +- arch/arm64/include/asm/unistd32.h | 2 + arch/ia64/kernel/syscalls/syscall.tbl | 1 + arch/m68k/kernel/syscalls/syscall.tbl | 1 + arch/microblaze/kernel/syscalls/syscall.tbl | 1 + arch/mips/kernel/syscalls/syscall_n32.tbl | 1 + arch/mips/kernel/syscalls/syscall_n64.tbl | 1 + arch/mips/kernel/syscalls/syscall_o32.tbl | 1 + arch/parisc/kernel/syscalls/syscall.tbl | 1 + arch/powerpc/kernel/syscalls/syscall.tbl | 1 + arch/s390/kernel/syscalls/syscall.tbl | 1 + arch/sh/kernel/syscalls/syscall.tbl | 1 + arch/sparc/kernel/syscalls/syscall.tbl | 1 + arch/x86/entry/syscalls/syscall_32.tbl | 1 + arch/x86/entry/syscalls/syscall_64.tbl | 1 + arch/xtensa/kernel/syscalls/syscall.tbl | 1 + fs/open.c | 133 +++++++ fs/proc/proc_sysctl.c | 2 +- include/linux/syscalls.h | 1 + include/linux/sysctl.h | 3 + include/uapi/asm-generic/unistd.h | 5 +- include/uapi/linux/trusted-for.h | 18 + kernel/printk/sysctl.c | 9 - kernel/sysctl.c | 9 + tools/testing/selftests/Makefile | 1 + .../testing/selftests/interpreter/.gitignore | 2 + tools/testing/selftests/interpreter/Makefile | 21 + tools/testing/selftests/interpreter/config | 1 + .../selftests/interpreter/trust_policy_test.c | 362 ++++++++++++++++++ 32 files changed, 625 insertions(+), 12 deletions(-) create mode 100644 include/uapi/linux/trusted-for.h create mode 100644 tools/testing/selftests/interpreter/.gitignore create mode 100644 tools/testing/selftests/interpreter/Makefile create mode 100644 tools/testing/selftests/interpreter/config create mode 100644 tools/testing/selftests/interpreter/trust_policy_test.c
base-commit: 6b8d4927540e416878113f0f7e273ddc939291f3
Signature · 1 line
2.34.1
PATCH v18 1/4 printk: Move back proc_dointvec_minmax_sysadmin() to sysctl.c
From: Mickaël Salaün <[email protected]>
The proc_dointvec_minmax_sysadmin() helper is useful for the fs.trusted_for_policy sysctl brought by the next commit.
This partially revert commit 642fd23fb826 ("printk: move printk sysctl to printk/sysctl.c") from Luis Chamberlain's 20211129-sysctl-cleanups branch [1], to share the proc_dointvec_minmax_sysadmin() helper. FYI, this previous commit also got the buffer pointer an __user attribute.
Also remove the forgotten ten_thousand static variable (moved to kernel/printk/sysctl.c).
--- include/linux/sysctl.h | 2 ++ kernel/printk/sysctl.c | 9 --------- kernel/sysctl.c | 9 +++++++++ 3 files changed, 11 insertions(+), 9 deletions(-)
include/linux/sysctl.h +2 -0
@@ -69,6 +69,8 @@ int proc_dobool(struct ctl_table *table, int write, void *buffer,int proc_dointvec (struct ctl_table *,int ,void *,size_t *,loff_t *);int proc_douintvec (struct ctl_table *,int ,void *,size_t *,loff_t *);int proc_dointvec_minmax (struct ctl_table *,int ,void *,size_t *,loff_t *); +int proc_dointvec_minmax_sysadmin (struct ctl_table *,int ,void *,size_t *, +loff_t *);int proc_douintvec_minmax (struct ctl_table *table,int write,void *buffer,size_t *lenp,loff_t *ppos); int proc_dou8vec_minmax(struct ctl_table *table, int write, void *buffer,
kernel/printk/sysctl.c +0 -9
@@ -11,15 +11,6 @@static const int ten_thousand =10000 ; -static int proc_dointvec_minmax_sysadmin (struct ctl_table *table,int write, -void __user *buffer,size_t *lenp,loff_t *ppos) -{ -if (write && !capable (CAP_SYS_ADMIN )) -return -EPERM ; - -return proc_dointvec_minmax (table, write, buffer, lenp, ppos); -} -static struct ctl_table printk_sysctls[] = { { .procname ="printk" ,
kernel/sysctl.c +9 -0
@@ -888,6 +888,15 @@ static int proc_taint(struct ctl_table *table, int write,return err; } +int proc_dointvec_minmax_sysadmin (struct ctl_table *table,int write, +void __user *buffer,size_t *lenp,loff_t *ppos) +{ +if (write && !capable (CAP_SYS_ADMIN )) +return -EPERM ; + +return proc_dointvec_minmax (table, write, buffer, lenp, ppos); +} +/** * struct do_proc_dointvec_minmax_conv_param - proc_dointvec_minmax() range checking structure * @min: pointer to minimum allowable value
Signature · 1 line
2.34.1
PATCH v18 2/4 fs: Add trusted_for(2) syscall implementation and related sysctl
In reply to Mickaël SalaünFrom: Mickaël Salaün <[email protected]>
The trusted_for() syscall enables user space tasks to check that files are trusted to be executed or interpreted by user space. This may allow script interpreters to check execution permission before reading commands from a file, or dynamic linkers to allow shared object loading. This may be seen as a way for a trusted task (e.g. interpreter) to check the trustworthiness of files (e.g. scripts) before extending its control flow graph with new ones originating from these files.
The security policy is consistently managed by the kernel through the new sysctl: fs.trusted_for_policy . This enables system administrators to enforce two complementary security policies according to the installed system: enforce the noexec mount option, and enforce executable file permission. Indeed, because of compatibility with installed systems, only system administrators are able to check that this new enforcement is in line with the system mount points and file permissions.
For this to be possible, script interpreters must use trusted_for(2) with the TRUSTED_FOR_EXECUTION usage. To be fully effective, these interpreters also need to handle the other ways to execute code: command line parameters (e.g., option -e for Perl), module loading (e.g., option -m for Python), stdin, file sourcing, environment variables, configuration files, etc. According to the threat model, it may be acceptable to allow some script interpreters (e.g. Bash) to interpret commands from stdin, may it be a TTY or a pipe, because it may not be enough to (directly) perform syscalls.
Even without enforced security policy, user space interpreters can use this syscall to try as much as possible to enforce the system policy at their level, knowing that it will not break anything on running systems which do not care about this feature. However, on systems which want this feature enforced, there will be knowledgeable people (i.e. system administrator who configured fs.trusted_for_policy deliberately) to manage it.
Because trusted_for(2) is a mean to enforce a system-wide security policy (but not application-centric policies), it does not make sense for user space to check the sysctl value. Indeed, this new syscall only enables to extend the system ability to enforce a policy thanks to (some trusted) user space collaboration. Moreover, additional security policies could be managed by LSMs. This is a best-effort approach from the application developer point of view:
https://lore.kernel.org/lkml/[email protected]/
trusted_for(2) with TRUSTED_FOR_EXECUTION should not be confused with the O_EXEC flag (for open) which is intended for execute-only, which obviously doesn't work for scripts. However, a similar behavior could be implemented in user space with O_PATH:
https://lore.kernel.org/lkml/[email protected]/
Being able to restrict execution also enables to protect the kernel by restricting arbitrary syscalls that an attacker could perform with a crafted binary or certain script languages. It also improves multilevel isolation by reducing the ability of an attacker to use side channels with specific code. These restrictions can natively be enforced for ELF binaries (with the noexec mount option) but require this kernel extension to properly handle scripts (e.g. Python, Perl). To get a consistent execution policy, additional memory restrictions should also be enforced (e.g. thanks to SELinux).
This is a new implementation of a patch initially written by Vincent Strubel for CLIP OS 4:
https://github.com/clipos-archive/src_platform_clip-patches/blob/f5cb330d6b684752e403b4e41b39f7004d88e561/1901_open_mayexec.patch
This patch has been used for more than 13 years with customized script interpreters. Some examples (with the original O_MAYEXEC) can be found here:
https://github.com/clipos-archive/clipos4_portage-overlay/search?q=O_MAYEXEC
---
Changes since v17:
* Move the trusted_for_policy sysctl to a dedicated table in fs/open.c to make kernel/sysctl.c easier to maintain.
Changes since v16:
* Replace the enum trusted_for_usage with an int in the syscall signature to avoid C unspecified behavior (suggested by Alejandro Colomar). This is mostly a cosmetic fix according to the current kernel compilers and used options, but let's remove implementation-defined hazard.
Changes since v14:
* Add full syscall documentation (requested by Andrew Morton).
Changes since v13:
* Rename sysctl from "trust_policy" to "trusted_for_policy" (suggested by Kees Cook).
* Add Acked-by Kees Cook.
Changes since v12:
* Update inode_permission() call to allign with commit 47291baa8ddf ("namei: make permission helpers idmapped mount aware").
* Switch from d_backing_inode(f.file->f_path.dentry) to file_inode(f.file).
Changes since v10:
* Add enum definition to syscalls.h .
Changes since v9:
* Rename the syscall to trusted_for(2) and the sysctl to fs.trust_policy
* Add a dedicated enum trusted_for_usage with include/uapi/linux/trusted-for.h
* Remove the extra MAY_INTROSPECTION_EXEC bit. LSMs can still implement this feature themselves.
Changes since v8:
* Add a dedicated syscall introspect_access() (requested by Al Viro).
* Rename MAY_INTERPRETED_EXEC to MAY_INTROSPECTION_EXEC .
* Rename the sysctl fs.interpreted_access to fs.introspection_policy .
* Update documentation.
Changes since v7:
* Replaces openat2/O_MAYEXEC with faccessat2/X_OK/AT_INTERPRETED . Switching to an FD-based syscall was suggested by Al Viro and Jann Horn.
* Handle special file descriptors.
* Add a compatibility mode for execute/read check.
* Move the sysctl policy from fs/namei.c to fs/open.c for the new faccessat2/AT_INTERPRETED.
* Rename the sysctl from fs.open_mayexec_enforce to fs.interpreted_access .
* Update documentation accordingly.
Changes since v6:
* Allow opening pipes, block devices and character devices with O_MAYEXEC when there is no enforced policy, but forbid any non-regular file opened with O_MAYEXEC otherwise (i.e. for any enforced policy).
* Add a paragraph about the non-regular files policy.
* Move path_noexec() calls out of the fast-path (suggested by Kees Cook).
* Do not set __FMODE_EXEC for now because of inconsistent behavior:
https://lore.kernel.org/lkml/202007160822.CCDB5478@keescook/
* Returns EISDIR when opening a directory with O_MAYEXEC.
* Removed Deven Bowers and Kees Cook Reviewed-by tags because of the current update.
Changes since v5:
* Remove the static enforcement configuration through Kconfig because it makes the code more simple like this, and because the current sysctl configuration can only be set with CAP_SYS_ADMIN, the same way mount options (i.e. noexec) can be set. If an harden distro wants to enforce a configuration, it should restrict capabilities or sysctl configuration. Furthermore, an LSM can easily leverage O_MAYEXEC to fit its need.
* Move checks from inode_permission() to may_open() and make the error codes more consistent according to file types (in line with a previous commit): opening a directory with O_MAYEXEC returns EISDIR and other non-regular file types may return EACCES.
* In may_open(), when OMAYEXEC_ENFORCE_FILE is set, replace explicit call to generic_permission() with an artificial MAY_EXEC to avoid double calls. This makes sense especially when an LSM policy forbids execution of a file.
* Replace the custom proc_omayexec() with proc_dointvec_minmax_sysadmin(), and then replace the CAP_MAC_ADMIN check with a CAP_SYS_ADMIN one (suggested by Kees Cook and Stephen Smalley).
* Use BIT() (suggested by Kees Cook).
* Rename variables (suggested by Kees Cook).
* Reword the kconfig help.
* Import the documentation patch (suggested by Kees Cook):
https://lore.kernel.org/lkml/[email protected]/
* Update documentation and add LWN.net article.
Changes since v4:
* Add kernel configuration options to enforce O_MAYEXEC at build time, and disable the sysctl in such case (requested by James Morris).
* Reword commit message.
Changes since v3:
* Switch back to O_MAYEXEC, but only handle it with openat2(2) which checks unknown flags (suggested by Aleksa Sarai). Cf.
https://lore.kernel.org/lkml/[email protected]/
Changes since v2:
* Replace O_MAYEXEC with RESOLVE_MAYEXEC from openat2(2). This change enables to not break existing application using bogus O_* flags that may be ignored by current kernels by using a new dedicated flag, only usable through openat2(2) (suggested by Jeff Layton). Using this flag will results in an error if the running kernel does not support it. User space needs to manage this case, as with other RESOLVE_* flags. The best effort approach to security (for most common distros) will simply consists of ignoring such an error and retry without RESOLVE_MAYEXEC. However, a fully controlled system may which to error out if such an inconsistency is detected.
* Cosmetic changes.
Changes since v1:
* Set __FMODE_EXEC when using O_MAYEXEC to make this information available through the new fanotify/FAN_OPEN_EXEC event (suggested by Jan Kara and Matthew Bobrowski):
https://lore.kernel.org/lkml/[email protected]/
* Move code from Yama to the FS subsystem (suggested by Kees Cook).
* Make omayexec_inode_permission() static (suggested by Jann Horn).
* Use mode 0600 for the sysctl.
* Only match regular files (not directories nor other types), which follows the same semantic as commit 73601ea5b7b1 ("fs/open.c: allow opening only regular files during execve()").
--- Documentation/admin-guide/sysctl/fs.rst | 50 +++++++++ fs/open.c | 133 ++++++++++++++++++++++++ fs/proc/proc_sysctl.c | 2 +- include/linux/syscalls.h | 1 + include/linux/sysctl.h | 1 + include/uapi/linux/trusted-for.h | 18 ++++ 6 files changed, 204 insertions(+), 1 deletion(-) create mode 100644 include/uapi/linux/trusted-for.h
Documentation/admin-guide/sysctl/fs.rst +50 -0
@@ -48,6 +48,7 @@ Currently, these files are in /proc/sys/fs: - suid_dumpable - super-max - super-nr +- trusted_for_policy aio-nr & aio-max-nr
@@ -382,3 +383,52 @@ Each "watch" costs roughly 90 bytes on a 32bit kernel, and roughly 160 bytes on a 64bit one. The current default value for max_user_watches is the 1/25 (4%) of the available low memory, divided for the "watch" cost in bytes. + + +trusted_for_policy +------------------ + +An interpreter can call :manpage:`trusted_for(2)` with a +``TRUSTED_FOR_EXECUTION`` usage to check that opened regular files are expected +to be executable. If the file is not identified as executable, then the +syscall returns -EACCES. This may allow a script interpreter to check +executable permission before reading commands from a file, or a dynamic linker +to only load executable shared objects. One interesting use case is to enforce +a "write xor execute" policy through interpreters. + +The ability to restrict code execution must be thought as a system-wide policy, +which first starts by restricting mount points with the ``noexec`` option. +This option is also automatically applied to special filesystems such as /proc . +This prevents files on such mount points to be directly executed by the kernel +or mapped as executable memory (e.g. libraries). With script interpreters +using :manpage:`trusted_for(2)`, the executable permission can then be checked +before reading commands from files. This makes it possible to enforce the +``noexec`` at the interpreter level, and thus propagates this security policy +to scripts. To be fully effective, these interpreters also need to handle the +other ways to execute code: command line parameters (e.g., option ``-e`` for +Perl), module loading (e.g., option ``-m`` for Python), stdin, file sourcing, +environment variables, configuration files, etc. According to the threat +model, it may be acceptable to allow some script interpreters (e.g. Bash) to +interpret commands from stdin, may it be a TTY or a pipe, because it may not be +enough to (directly) perform syscalls. + +There are two complementary security policies: enforce the ``noexec`` mount +option, and enforce executable file permission. These policies are handled by +the ``fs.trusted_for_policy`` sysctl (writable only with ``CAP_SYS_ADMIN``) as +a bitmask: + +1 - Mount restriction: checks that the mount options for the underlying VFS + mount do not prevent execution. + +2 - File permission restriction: checks that the file is marked as + executable for the current process (e.g., POSIX permissions, ACLs). + +Note that as long as a policy is enforced, checking any non-regular file with +:manpage:`trusted_for(2)` returns -EACCES (e.g. TTYs, pipe), even when such a +file is marked as executable or is on an executable mount point. + +Code samples can be found in +tools/testing/selftests/interpreter/trust_policy_test.c and interpreter patches +(for the original O_MAYEXEC) are available at +https://github.com/clipos-archive/clipos4_portage-overlay/search?q=O_MAYEXEC . +See also an overview article: https://lwn.net/Articles/820000/ .
fs/open.c +133 -0
145 lines not on this page · raw message
fs/proc/proc_sysctl.c +1 -1
@@ -26,7 +26,7 @@ static const struct file_operations proc_sys_dir_file_operations;static const struct inode_operations proc_sys_dir_operations;/* shared constants to be used in various sysctls */ -const int sysctl_vals[] = {-1 ,0 ,1 ,2 ,4 ,100 ,200 ,1000 ,3000 ,INT_MAX ,65535 }; +const int sysctl_vals[] = {-1 ,0 ,1 ,2 ,4 ,100 ,200 ,1000 ,3000 ,INT_MAX ,65535 ,3 };EXPORT_SYMBOL (sysctl_vals);const unsigned long sysctl_long_vals[] = {0 ,1 ,LONG_MAX };
include/linux/syscalls.h +1 -0
@@ -462,6 +462,7 @@ asmlinkage long sys_fallocate(int fd, int mode, loff_t offset, loff_t len);asmlinkage long sys_faccessat (int dfd,const char __user *filename,int mode);asmlinkage long sys_faccessat2 (int dfd,const char __user *filename,int mode,int flags); +asmlinkage long sys_trusted_for (int fd,int usage,u32 flags);asmlinkage long sys_chdir (const char __user *filename);asmlinkage long sys_fchdir (unsigned int fd);asmlinkage long sys_chroot (const char __user *filename);
include/linux/sysctl.h +1 -0
@@ -51,6 +51,7 @@ struct ctl_dir;/* this is needed for the proc_dointvec_minmax for [fs_]overflow UID and GID */ #define SYSCTL_MAXOLDUID ((void *)&sysctl_vals[10]) +#define SYSCTL_THREE ((void *)&sysctl_vals[11])extern const int sysctl_vals[];
include/uapi/linux/trusted-for.h new file +18 -0
@@ -0,0 +1,18 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _UAPI_LINUX_TRUSTED_FOR_H +#define _UAPI_LINUX_TRUSTED_FOR_H + +/** +* enum trusted_for_usage - Usage for which a file descriptor is trusted +* +* Argument of trusted_for(2). +*/ +enum trusted_for_usage { +/** +* @TRUSTED_FOR_EXECUTION: Check that the data read from a file +* descriptor is trusted to be executed or interpreted (e.g. scripts). +*/ +TRUSTED_FOR_EXECUTION =1 , +}; + +#endif /* _UAPI_LINUX_TRUSTED_FOR_H */
Signature · 1 line
2.34.1
PATCH v18 3/4 arch: Wire up trusted_for(2)
In reply to Mickaël SalaünFrom: Mickaël Salaün <[email protected]>
Wire up trusted_for(2) for all architectures.
---
Changes since v17:
* Update syscall IDs to align with the new set_mempolicy_home_node.
Changes since v15:
* Update syscall IDs to align with the new futex_waitv.
Changes since v13:
* Add Reviewed-by Kees Cook.
Changes since v12:
* Update syscall IDs to align with the new ones.
Changes since v11:
* Add Acked-by: Geert Uytterhoeven <[email protected]>
* Rebase and leave space for watch_mount(2) and epoll_pwait2(2) from -next.
Changes since v9:
* Rename introspect_access(2) to trusted_for(2).
* Increase syscall number to leave space for memfd_secret(2) in -next.
Changes since v7:
* New patch for the new syscall.
* Increase syscall numbers by 2 to leave space for new ones (in linux-next): watch_mount(2) and process_madvise(2).
--- arch/alpha/kernel/syscalls/syscall.tbl | 1 + arch/arm/tools/syscall.tbl | 1 + arch/arm64/include/asm/unistd.h | 2 +- arch/arm64/include/asm/unistd32.h | 2 ++ arch/ia64/kernel/syscalls/syscall.tbl | 1 + arch/m68k/kernel/syscalls/syscall.tbl | 1 + arch/microblaze/kernel/syscalls/syscall.tbl | 1 + arch/mips/kernel/syscalls/syscall_n32.tbl | 1 + arch/mips/kernel/syscalls/syscall_n64.tbl | 1 + arch/mips/kernel/syscalls/syscall_o32.tbl | 1 + arch/parisc/kernel/syscalls/syscall.tbl | 1 + arch/powerpc/kernel/syscalls/syscall.tbl | 1 + arch/s390/kernel/syscalls/syscall.tbl | 1 + arch/sh/kernel/syscalls/syscall.tbl | 1 + arch/sparc/kernel/syscalls/syscall.tbl | 1 + arch/x86/entry/syscalls/syscall_32.tbl | 1 + arch/x86/entry/syscalls/syscall_64.tbl | 1 + arch/xtensa/kernel/syscalls/syscall.tbl | 1 + include/uapi/asm-generic/unistd.h | 5 ++++- 19 files changed, 23 insertions(+), 2 deletions(-)
arch/alpha/kernel/syscalls/syscall.tbl +1 -0
@@ -490,3 +490,4 @@ 558 common process_mrelease sys_process_mrelease 559 common futex_waitv sys_futex_waitv 560 common set_mempolicy_home_node sys_ni_syscall +561 common trusted_for sys_trusted_for
arch/arm/tools/syscall.tbl +1 -0
@@ -464,3 +464,4 @@ 448 common process_mrelease sys_process_mrelease 449 common futex_waitv sys_futex_waitv 450 common set_mempolicy_home_node sys_set_mempolicy_home_node +451 common trusted_for sys_trusted_for
arch/arm64/include/asm/unistd.h +1 -1
@@ -38,7 +38,7 @@#define __ARM_NR_compat_set_tls (__ARM_NR_COMPAT_BASE + 5)#define __ARM_NR_COMPAT_END (__ARM_NR_COMPAT_BASE + 0x800) -#define __NR_compat_syscalls 451 +#define __NR_compat_syscalls 452#endif #define __ARCH_WANT_SYS_CLONE
arch/arm64/include/asm/unistd32.h +2 -0
@@ -907,6 +907,8 @@ __SYSCALL(__NR_process_mrelease, sys_process_mrelease) __SYSCALL(__NR_futex_waitv, sys_futex_waitv)#define __NR_set_mempolicy_home_node 450 __SYSCALL(__NR_set_mempolicy_home_node, sys_set_mempolicy_home_node) +#define __NR_trusted_for 451 +__SYSCALL (__NR_trusted_for, sys_trusted_for)/* * Please add new compat syscalls above this comment and update
arch/ia64/kernel/syscalls/syscall.tbl +1 -0
@@ -371,3 +371,4 @@ 448 common process_mrelease sys_process_mrelease 449 common futex_waitv sys_futex_waitv 450 common set_mempolicy_home_node sys_set_mempolicy_home_node +451 common trusted_for sys_trusted_for
arch/m68k/kernel/syscalls/syscall.tbl +1 -0
@@ -450,3 +450,4 @@ 448 common process_mrelease sys_process_mrelease 449 common futex_waitv sys_futex_waitv 450 common set_mempolicy_home_node sys_set_mempolicy_home_node +451 common trusted_for sys_trusted_for
arch/microblaze/kernel/syscalls/syscall.tbl +1 -0
@@ -456,3 +456,4 @@ 448 common process_mrelease sys_process_mrelease 449 common futex_waitv sys_futex_waitv 450 common set_mempolicy_home_node sys_set_mempolicy_home_node +451 common trusted_for sys_trusted_for
arch/mips/kernel/syscalls/syscall_n32.tbl +1 -0
@@ -389,3 +389,4 @@ 448 n32 process_mrelease sys_process_mrelease 449 n32 futex_waitv sys_futex_waitv 450 n32 set_mempolicy_home_node sys_set_mempolicy_home_node +451 n32 trusted_for sys_trusted_for
arch/mips/kernel/syscalls/syscall_n64.tbl +1 -0
@@ -365,3 +365,4 @@ 448 n64 process_mrelease sys_process_mrelease 449 n64 futex_waitv sys_futex_waitv 450 common set_mempolicy_home_node sys_set_mempolicy_home_node +451 n64 trusted_for sys_trusted_for
arch/mips/kernel/syscalls/syscall_o32.tbl +1 -0
@@ -438,3 +438,4 @@ 448 o32 process_mrelease sys_process_mrelease 449 o32 futex_waitv sys_futex_waitv 450 o32 set_mempolicy_home_node sys_set_mempolicy_home_node +451 o32 trusted_for sys_trusted_for
arch/parisc/kernel/syscalls/syscall.tbl +1 -0
@@ -448,3 +448,4 @@ 448 common process_mrelease sys_process_mrelease 449 common futex_waitv sys_futex_waitv 450 common set_mempolicy_home_node sys_set_mempolicy_home_node +451 common trusted_for sys_trusted_for
arch/powerpc/kernel/syscalls/syscall.tbl +1 -0
@@ -530,3 +530,4 @@ 448 common process_mrelease sys_process_mrelease 449 common futex_waitv sys_futex_waitv 450 nospu set_mempolicy_home_node sys_set_mempolicy_home_node +451 common trusted_for sys_trusted_for
arch/s390/kernel/syscalls/syscall.tbl +1 -0
@@ -453,3 +453,4 @@ 448 common process_mrelease sys_process_mrelease sys_process_mrelease 449 common futex_waitv sys_futex_waitv sys_futex_waitv 450 common set_mempolicy_home_node sys_set_mempolicy_home_node sys_set_mempolicy_home_node +451 common trusted_for sys_trusted_for sys_trusted_for
arch/sh/kernel/syscalls/syscall.tbl +1 -0
@@ -453,3 +453,4 @@ 448 common process_mrelease sys_process_mrelease 449 common futex_waitv sys_futex_waitv 450 common set_mempolicy_home_node sys_set_mempolicy_home_node +451 common trusted_for sys_trusted_for
arch/sparc/kernel/syscalls/syscall.tbl +1 -0
@@ -496,3 +496,4 @@ 448 common process_mrelease sys_process_mrelease 449 common futex_waitv sys_futex_waitv 450 common set_mempolicy_home_node sys_set_mempolicy_home_node +451 common trusted_for sys_trusted_for
arch/x86/entry/syscalls/syscall_32.tbl +1 -0
@@ -455,3 +455,4 @@ 448 i386 process_mrelease sys_process_mrelease 449 i386 futex_waitv sys_futex_waitv 450 i386 set_mempolicy_home_node sys_set_mempolicy_home_node +451 i386 trusted_for sys_trusted_for
arch/x86/entry/syscalls/syscall_64.tbl +1 -0
@@ -372,6 +372,7 @@ 448 common process_mrelease sys_process_mrelease 449 common futex_waitv sys_futex_waitv 450 common set_mempolicy_home_node sys_set_mempolicy_home_node +451 common trusted_for sys_trusted_for # # Due to a historical design error, certain syscalls are numbered differently
arch/xtensa/kernel/syscalls/syscall.tbl +1 -0
@@ -421,3 +421,4 @@ 448 common process_mrelease sys_process_mrelease 449 common futex_waitv sys_futex_waitv 450 common set_mempolicy_home_node sys_set_mempolicy_home_node +451 common trusted_for sys_trusted_for
include/uapi/asm-generic/unistd.h +4 -1
@@ -886,8 +886,11 @@ __SYSCALL(__NR_futex_waitv, sys_futex_waitv)#define __NR_set_mempolicy_home_node 450 __SYSCALL(__NR_set_mempolicy_home_node, sys_set_mempolicy_home_node) +#define __NR_trusted_for 451 +__SYSCALL(__NR_trusted_for, sys_trusted_for) +#undef __NR_syscalls -#define __NR_syscalls 451 +#define __NR_syscalls 452/* * 32 bit systems traditionally used different
Signature · 1 line
2.34.1
PATCH v18 4/4 selftest/interpreter: Add tests for trusted_for(2) policies
In reply to Mickaël SalaünFrom: Mickaël Salaün <[email protected]>
Test that checks performed by trusted_for(2) on file descriptors are consistent with noexec mount points and file execute permissions, according to the policy configured with the fs.trust_policy sysctl.
---
Changes since v14:
* Add Reviewed-by Kees Cook.
Changes since v13:
* Move -I to CFLAGS (suggested by Kees Cook).
* Update sysctl name.
Changes since v12:
* Fix Makefile's license.
Changes since v10:
* Update selftest Makefile.
Changes since v9:
* Rename the syscall and the sysctl.
* Update tests for enum trusted_for_usage
Changes since v8:
* Update with the dedicated syscall introspect_access(2) and the renamed fs.introspection_policy sysctl.
* Remove check symlink which can't be use as is anymore.
* Use socketpair(2) to test UNIX socket.
Changes since v7:
* Update tests with faccessat2/AT_INTERPRETED, including new ones to check that setting R_OK or W_OK returns EINVAL.
* Add tests for memfd, pipefs and nsfs.
* Rename and move back tests to a standalone directory.
Changes since v6:
* Add full combination tests for all file types, including block devices, character devices, fifos, sockets and symlinks.
* Properly save and restore initial sysctl value for all tests.
Changes since v5:
* Refactor with FIXTURE_VARIANT, which make the tests much more easy to read and maintain.
* Save and restore initial sysctl value (suggested by Kees Cook).
* Test with a sysctl value of 0.
* Check errno in sysctl_access_write test.
* Update tests for the CAP_SYS_ADMIN switch.
* Update tests to check -EISDIR (replacing -EACCES).
* Replace FIXTURE_DATA() with FIXTURE() (spotted by Kees Cook).
* Use global const strings.
Changes since v3:
* Replace RESOLVE_MAYEXEC with O_MAYEXEC.
* Add tests to check that O_MAYEXEC is ignored by open(2) and openat(2).
Changes since v2:
* Move tests from exec/ to openat2/ .
* Replace O_MAYEXEC with RESOLVE_MAYEXEC from openat2(2).
* Cleanup tests.
Changes since v1:
* Move tests from yama/ to exec/ .
* Fix _GNU_SOURCE in kselftest_harness.h .
* Add a new test sysctl_access_write to check if CAP_MAC_ADMIN is taken into account.
* Test directory execution which is always forbidden since commit 73601ea5b7b1 ("fs/open.c: allow opening only regular files during execve()"), and also check that even the root user can not bypass file execution checks.
* Make sure delete_workspace() always as enough right to succeed.
* Cosmetic cleanup.
--- tools/testing/selftests/Makefile | 1 + .../testing/selftests/interpreter/.gitignore | 2 + tools/testing/selftests/interpreter/Makefile | 21 + tools/testing/selftests/interpreter/config | 1 + .../selftests/interpreter/trust_policy_test.c | 362 ++++++++++++++++++ 5 files changed, 387 insertions(+) create mode 100644 tools/testing/selftests/interpreter/.gitignore create mode 100644 tools/testing/selftests/interpreter/Makefile create mode 100644 tools/testing/selftests/interpreter/config create mode 100644 tools/testing/selftests/interpreter/trust_policy_test.c
tools/testing/selftests/Makefile +1 -0
@@ -21,6 +21,7 @@ TARGETS += ftrace TARGETS += futex TARGETS += gpio TARGETS += intel_pstate +TARGETS += interpreter TARGETS += ipc TARGETS += ir TARGETS += kcmp
tools/testing/selftests/interpreter/.gitignore new file +2 -0
@@ -0,0 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0-only +/*_test
tools/testing/selftests/interpreter/Makefile new file +21 -0
@@ -0,0 +1,21 @@ +# SPDX-License-Identifier: GPL-2.0 + +CFLAGS += -Wall -O2 -I$(khdr_dir) +LDLIBS += -lcap + +src_test := $(wildcard *_test.c) +TEST_GEN_PROGS := $(src_test:.c=) + +KSFT_KHDR_INSTALL := 1 +include ../lib.mk + +khdr_dir = $(top_srcdir)/usr/include + +$(khdr_dir)/asm-generic/unistd.h: khdr + @: + +$(khdr_dir)/linux/trusted-for.h: khdr + @: + +$(OUTPUT)/%_test: %_test.c $(khdr_dir)/asm-generic/unistd.h $(khdr_dir)/linux/trusted-for.h ../kselftest_harness.h + $(LINK.c) $< $(LDLIBS) -o $@
tools/testing/selftests/interpreter/config new file +1 -0
@@ -0,0 +1 @@ +CONFIG_SYSCTL=y
tools/testing/selftests/interpreter/trust_policy_test.c new file +362 -0
362 lines not on this page · raw message
Signature · 1 line
2.34.1