ASoC: cs4265: Add a remove() function
Subsystems (3)
PATCH v3 1/1 ASoC: cs4265: Add a remove() function
From: Fabio Estevam <[email protected]>
When the reset_gpio GPIO is used, it is better to put the codec back into reset state when the driver unbinds.
Add a remove() function to accomplish that.
---
Changes since v2:
- Keep using the current polarity logic.
sound/soc/codecs/cs4265.c | 11 +++++++++++ 1 file changed, 11 insertions(+)
sound/soc/codecs/cs4265.c +11 -0
@@ -626,6 +626,16 @@ static int cs4265_i2c_probe(struct i2c_client *i2c_client, ARRAY_SIZE(cs4265_dai)); } +static int cs4265_i2c_remove (struct i2c_client *i2c) +{ +struct cs4265_private *cs4265 =i2c_get_clientdata (i2c); + +if (cs4265->reset_gpio) +gpiod_set_value_cansleep (cs4265->reset_gpio,0 ); + +return 0 ; +} +static const struct of_device_id cs4265_of_match[] = { { .compatible ="cirrus,cs4265" , }, { }
@@ -645,6 +655,7 @@ static struct i2c_driver cs4265_i2c_driver = { }, .id_table = cs4265_id, .probe = cs4265_i2c_probe, + .remove = cs4265_i2c_remove, };module_i2c_driver (cs4265_i2c_driver);
Signature · 1 line
2.25.1
Quoted 10 lines · Fabio Estevam
From: Fabio Estevam <[email protected]>
When the
reset_gpioGPIO is used, it is better to put the codec back into reset state when the driver unbinds.Add a
remove()function to accomplish that.Suggested-by Charles Keepax <[email protected]>Signed-off-by Fabio Estevam <[email protected]>---
Thanks,
Charles
Mark Brown
maintainerQuoted 8 lines · Fabio Estevam
From: Fabio Estevam <[email protected]>
When the
reset_gpioGPIO is used, it is better to put the codec back into reset state when the driver unbinds.Add a
remove()function to accomplish that.[...]
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
Thanks!
[1/1] ASoC: cs4265: Add a remove() function
commit: a319cb32e7cfd2703db3a883ce260a7b06729895
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark