configs/imx8mmevk_defconfig: new defconfig

PATCH Superseded Fabio Estevam 1 participant 1 message Jan 7, 2022 Arm i.MX and Layerscape

lore

Share & tools

lore

Fabio Estevam

author reviewer

2022-01-07 18:42 UTC #0 lore raw

PATCH 1/1 configs/imx8mmevk_defconfig: new defconfig

Add support for imx8mmevk_defconfig that allows booting a mainline kernel.

This defconfig still relies on NXP ATF and U-Boot, but in the long term the plan is to switch to mainline ATF and U-Boot as well.

Signed-off-by Fabio Estevam <[email protected]>

---
 DEVELOPERS                           |  1 +
 board/freescale/imx8mmevk/readme.txt |  6 ++++
 configs/imx8mmevk_defconfig          | 41 ++++++++++++++++++++++++++++
 3 files changed, 48 insertions(+)
 create mode 100644 configs/imx8mmevk_defconfig

DEVELOPERS +1 -0

index 37c792816a1d..907600be7211 100644
@@ -823,6 +823,7 @@ F:	configs/imx6ullevk_defconfig
 F:	configs/imx6ulpico_defconfig
 F:	configs/imx7d-sdb_defconfig
 F:	configs/imx7dpico_defconfig
+F:	configs/imx8mmevk_defconfig
 F:	configs/imx8mqevk_defconfig
 F:	configs/mx25pdk_defconfig
 F:	configs/mx51evk_defconfig

board/freescale/imx8mmevk/readme.txt +6 -0

index 7b69405d3030..a8e80a48f9ea 100644
@@ -10,8 +10,14 @@ Build
 
 First, configure Buildroot for the i.MX8MM EVK board:
 
+If you want to use the NXP kernel:
+
   make freescale_imx8mmevk_defconfig
 
+Or if you want to use a mainline kernel:
+
+  make imx8mmevk_defconfig
+
 Build all components:
 
   make

configs/imx8mmevk_defconfig new file +41 -0

41 lines not on this page · raw message

Signature · 6 lines

2.25.1

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot