Skip to contentSkip to conversation

overview-manual: document hash equivalence

PATCH Superseded Michael Opdenacker 1 participant 3 messages Jan 7, 2022 3 messages not in the archive

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw

PATCH v2 1/1 overview-manual: document hash equivalence

---
 documentation/overview-manual/concepts.rst | 122 +++++++++++++++++++++
 1 file changed, 122 insertions(+)
documentation/overview-manual/concepts.rst +122 -0
index 6f8a3def69..e148731a57 100644
@@ -1938,6 +1938,128 @@ another reason why a task-based approach is preferred over a
 recipe-based approach, which would have to install the output from every
 task.
 
+Hash Equivalence
+----------------
+
+The above section explained how BitBake skips the execution of tasks
+which output can already be found in the Shared State cache.
+
+During a build, it may often be the case that the output / result of a task might
+be unchanged despite changes in the task's input values. An example might be
+whitespace changes in some input C code. In project terms, this is what we define
+as "equivalence".
+
+To keep track of such equivalence, BitBake has to manage three hashes
+for each task:
+
+- The *task hash* explained earlier: computed from the recipe metadata,
+  the task code and the task hash values from its dependencies.
+  When changes are made, these task hashes are therefore modified,
+  causing the task to re-execute. The task hashes of tasks depending on this
+  task are therefore modified too, causing the whole dependency
+  chain to re-execute.
+
+- The *output hash*, a new hash computed from the output of Shared State tasks,
+  tasks that save their resulting output to a Shared State tarball.
+  The mapping between the task hash and its output hash is reported
+  to a new *Hash Equivalence* server. This mapping is stored in a database
+  by the server for future reference.
+
+- The *unihash*, a new hash, initially set to the task hash for the task.
+  This is used to track the *unicity* of task output, and we will explain
+  how its value is maintained.
+
+When Hash Equivalence is enabled, BitBake computes the task hash
+for each task by using the unihash of its dependencies, instead
+of their task hash.
+
+Now, imagine that a Shared State task is modified because of a change in
+its code or metadata, or because of a change in its dependencies.
+Since this modifies its task hash, this task will need re-executing.
+Its output hash will therefore be computed again.
+
+Then, the new mapping between the new task hash and its output hash
+will be reported to the Hash Equivalence server. The server will
+let BitBake know whether this output hash is the same as a previously
+reported output hash, for a different task hash.
+
+If the output hash is reported to be different, BitBake will update
+the task's unihash, causing the task hash of depending tasks to be
+modified too, and making such tasks re-execute. This change is
+propagating to the depending tasks.
+
+On the contrary, if the output hash is reported to be identical
+to the previously recorded output hash, BitBake will keep the
+task's unihash unmodified. Thanks to this, the depending tasks
+will keep the same task hash, and won't need re-executing. The
+change is not propagating to the depending tasks.
+
+To summarize, when Hash Equivalence is enabled,
+a change in one of the tasks in BitBake's run queue
+doesn't have to propagate to all the downstream tasks that depend on the output
+of this task, causing a full rebuild of such tasks, and so on with the next
+depending tasks. Instead, BitBake can safely retrieve all the downstream
+task output from the Shared State Cache.
+
+This applies to multiple scenarios:
+
+-  A "trivial" change to a recipe that doesn't impact its generated output,
+   such as whitespace changes, modifications to unused code paths or
+   in the ordering of variables.
+
+-  Shared library updates, for example to fix a security vulnerability.
+   For sure, the programs using such a library should be rebuilt, but
+   their new binaries should remain identical. The corresponding tasks should
+   have a different output hash because of the change in the hash of their
+   library dependency, but thanks to their output being identical, Hash
+   Equivalence will stop the propagation down the dependency chain.
+
+-  Native tool updates. Though the depending tasks should be rebuilt,
+   it's likely that they will generate the same output and be marked
+   as equivalent.
+
+This mechanism is enabled by default in Poky, and is controlled by three
+variables:
+
+-  :term:`bitbake:BB_HASHSERVE`, specifying a local or remote Hash
+   Equivalence server to use.
+
+-  :term:`BB_HASHSERVE_UPSTREAM`, when ``BB_HASHSERVE = "auto"``,
+   allowing to connect the local server to an upstream one.
+
+-  :term:`bitbake:BB_SIGNATURE_HANDLER`, which must be set  to ``OEEquivHash``.
+
+Therefore, the default configuration in Poky corresponds to the
+below settings::
+
+   BB_HASHSERVE = "auto"
+   BB_SIGNATURE_HANDLER = "OEEquivHash"
+
+Rather than starting a local server, another possibility is to rely
+on a Hash Equivalence server on a network, by setting::
+
+   BB_HASHSERVE = "<HOSTNAME>:<PORT>"
+
+.. note::
+
+   The shared Hash Equivalence server needs to be maintained together with the
+   Share State cache. Otherwise, the server could report Shared State hashes
+   that only exist on specific clients.
+
+   We therefore recommend that one Hash Equivalence server be set up to
+   correspond with a given Shared State cache, and to start this server
+   in *read-only mode*, so that it doesn't store equivalences for
+   Shared State caches that are local to clients.
+
+   See the :term:`BB_HASHSERVE` reference for details about starting
+   a Hash Equivalence server.
+
+See the `video <https://www.youtube.com/watch?v=zXEdqGS62Wc>`__
+of Joshua Watt's `Hash Equivalence and Reproducible Builds
+<https://elinux.org/images/3/37/Hash_Equivalence_and_Reproducible_Builds.pdf>`__
+presentation at ELC 2020 for a very synthetic introduction to the
+Hash Equivalence implementation in the Yocto Project.
+
 Automatically Added Runtime Dependencies
 ========================================
 
Signature · 1 line
2.25.1

A message that is not in the archive (sent off-list or not yet received): [email protected]

#3 lore raw

On 1/7/22 7:57 PM, Michael Opdenacker wrote:

Here's the part that I updated thanks to RP's feedback...

Quoted 18 lines
(quoted diff) +18 -0
+
+Now, imagine that a Shared State task is modified because of a change in
+its code or metadata, or because of a change in its dependencies.
+Since this modifies its task hash, this task will need re-executing.
+Its output hash will therefore be computed again.
+
+Then, the new mapping between the new task hash and its output hash
+will be reported to the Hash Equivalence server. The server will
+let BitBake know whether this output hash is the same as a previously
+reported output hash, for a different task hash.
+
+If the output hash is reported to be different, BitBake will update
+the task's unihash, causing the task hash of depending tasks to be
+modified too, and making such tasks re-execute. This change is
+propagating to the depending tasks.
+
+On the contrary, if the output hash is reported to be identical
+to the previously recorded output hash, BitBake will keep the

Review

Quoted 10 lines
(quoted diff) +10 -0
+task's unihash unmodified. Thanks to this, the depending tasks
+will keep the same task hash, and won't need re-executing. The
+change is not propagating to the depending tasks.
+
+To summarize, when Hash Equivalence is enabled,
+a change in one of the tasks in BitBake's run queue
+doesn't have to propagate to all the downstream tasks that depend on the output
+of this task, causing a full rebuild of such tasks, and so on with the next
+depending tasks. Instead, BitBake can safely retrieve all the downstream
+task output from the Shared State Cache.

I realized that my previous explanations were assuming the modified task output was identical to the last generated output. Actually, any previously recorded output is fine, and can be retrieved from sstate.

Thanks in advance for your reviews!

Cheers
Michael.

Signature · 3 lines
Michael Opdenacker, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

A message that is not in the archive (sent off-list or not yet received): [email protected]

#5 lore raw
Quoted 4 lines · Michael Opdenacker

I realized that my previous explanations were assuming the modified task output was identical to the last generated output. Actually, any previously recorded output is fine, and can be retrieved from sstate.

Oops, forget my V2. I forgot to commit my changes. A V3 is coming right away.
Lesson: don't try to get too many things done on a Friday evening!

Michael.

Signature · 3 lines
Michael Opdenacker, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com