Skip to contentSkip to conversation

xdp: check prog type before updating BPF link

PATCH Applied Toke Høiland-Jørgensen 2 participants 6 messages Jan 7, 2022 – Jan 11, 2022

Subsystems (6)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/3 xdp: check prog type before updating BPF link

The bpf_xdp_link_update() function didn't check the program type before updating the program, which made it possible to install any program type as an XDP program, which is obviously not good. Syzbot managed to trigger this by swapping in an LWT program on the XDP hook which would crash in a helper call.

Fix this by adding a check and bailing out if the types don't match.

Fixes 026a4c28e1db ("bpf, xdp: Implement LINK_UPDATE for BPF XDP link")
Reported-by [email protected]
---
 net/core/dev.c | 6 ++++++
 1 file changed, 6 insertions(+)
net/core/dev.c +6 -0
index c4708e2487fb..2078d04c6482 100644
@@ -9656,6 +9656,12 @@ static int bpf_xdp_link_update(struct bpf_link *link, struct bpf_prog *new_prog,
 		goto out_unlock;
 	}
 	old_prog = link->prog;
+	if (old_prog->type != new_prog->type ||
+	    old_prog->expected_attach_type != new_prog->expected_attach_type) {
+		err = -EINVAL;
+		goto out_unlock;
+	}
+
 	if (old_prog == new_prog) {
 		/* no-op, don't disturb drivers */
 		bpf_prog_put(new_prog);
Signature · 1 line
2.34.1
#1 lore raw

PATCH v2 2/3 bpf/selftests: convert xdp_link test to ASSERT_* macros

Convert the selftest to use the preferred ASSERT_* macros instead of the deprecated CHECK().

v2:
- Don't add if statements around checks if they weren't there before.

---
 .../selftests/bpf/prog_tests/xdp_link.c       | 56 +++++++++----------
 1 file changed, 25 insertions(+), 31 deletions(-)
tools/testing/selftests/bpf/prog_tests/xdp_link.c +25 -31
index 983ab0b47d30..eec0bf83546b 100644
@@ -8,46 +8,47 @@
 
 void serial_test_xdp_link(void)
 {
-	__u32 duration = 0, id1, id2, id0 = 0, prog_fd1, prog_fd2, err;
 	DECLARE_LIBBPF_OPTS(bpf_xdp_set_link_opts, opts, .old_fd = -1);
 	struct test_xdp_link *skel1 = NULL, *skel2 = NULL;
+	__u32 id1, id2, id0 = 0, prog_fd1, prog_fd2;
 	struct bpf_link_info link_info;
 	struct bpf_prog_info prog_info;
 	struct bpf_link *link;
+	int err;
 	__u32 link_info_len = sizeof(link_info);
 	__u32 prog_info_len = sizeof(prog_info);
 
 	skel1 = test_xdp_link__open_and_load();
-	if (CHECK(!skel1, "skel_load", "skeleton open and load failed\n"))
+	if (!ASSERT_OK_PTR(skel1, "skel_load"))
 		goto cleanup;
 	prog_fd1 = bpf_program__fd(skel1->progs.xdp_handler);
 
 	skel2 = test_xdp_link__open_and_load();
-	if (CHECK(!skel2, "skel_load", "skeleton open and load failed\n"))
+	if (!ASSERT_OK_PTR(skel2, "skel_load"))
 		goto cleanup;
 	prog_fd2 = bpf_program__fd(skel2->progs.xdp_handler);
 
 	memset(&prog_info, 0, sizeof(prog_info));
 	err = bpf_obj_get_info_by_fd(prog_fd1, &prog_info, &prog_info_len);
-	if (CHECK(err, "fd_info1", "failed %d\n", -errno))
+	if (!ASSERT_OK(err, "fd_info1"))
 		goto cleanup;
 	id1 = prog_info.id;
 
 	memset(&prog_info, 0, sizeof(prog_info));
 	err = bpf_obj_get_info_by_fd(prog_fd2, &prog_info, &prog_info_len);
-	if (CHECK(err, "fd_info2", "failed %d\n", -errno))
+	if (!ASSERT_OK(err, "fd_info2"))
 		goto cleanup;
 	id2 = prog_info.id;
 
 	/* set initial prog attachment */
 	err = bpf_set_link_xdp_fd_opts(IFINDEX_LO, prog_fd1, XDP_FLAGS_REPLACE, &opts);
-	if (CHECK(err, "fd_attach", "initial prog attach failed: %d\n", err))
+	if (!ASSERT_OK(err, "fd_attach"))
 		goto cleanup;
 
 	/* validate prog ID */
 	err = bpf_get_link_xdp_id(IFINDEX_LO, &id0, 0);
-	CHECK(err || id0 != id1, "id1_check",
-	      "loaded prog id %u != id1 %u, err %d", id0, id1, err);
+	if (!ASSERT_OK(err, "id1_check_err") || !ASSERT_EQ(id0, id1, "id1_check_val"))
+		goto cleanup;
 
 	/* BPF link is not allowed to replace prog attachment */
 	link = bpf_program__attach_xdp(skel1->progs.xdp_handler, IFINDEX_LO);
@@ -62,7 +63,7 @@ void serial_test_xdp_link(void)
 	/* detach BPF program */
 	opts.old_fd = prog_fd1;
 	err = bpf_set_link_xdp_fd_opts(IFINDEX_LO, -1, XDP_FLAGS_REPLACE, &opts);
-	if (CHECK(err, "prog_detach", "failed %d\n", err))
+	if (!ASSERT_OK(err, "prog_detach"))
 		goto cleanup;
 
 	/* now BPF link should attach successfully */
@@ -73,24 +74,23 @@ void serial_test_xdp_link(void)
 
 	/* validate prog ID */
 	err = bpf_get_link_xdp_id(IFINDEX_LO, &id0, 0);
-	if (CHECK(err || id0 != id1, "id1_check",
-		  "loaded prog id %u != id1 %u, err %d", id0, id1, err))
+	if (!ASSERT_OK(err, "id1_check_err") || !ASSERT_EQ(id0, id1, "id1_check_val"))
 		goto cleanup;
 
 	/* BPF prog attach is not allowed to replace BPF link */
 	opts.old_fd = prog_fd1;
 	err = bpf_set_link_xdp_fd_opts(IFINDEX_LO, prog_fd2, XDP_FLAGS_REPLACE, &opts);
-	if (CHECK(!err, "prog_attach_fail", "unexpected success\n"))
+	if (!ASSERT_ERR(err, "prog_attach_fail"))
 		goto cleanup;
 
 	/* Can't force-update when BPF link is active */
 	err = bpf_set_link_xdp_fd(IFINDEX_LO, prog_fd2, 0);
-	if (CHECK(!err, "prog_update_fail", "unexpected success\n"))
+	if (!ASSERT_ERR(err, "prog_update_fail"))
 		goto cleanup;
 
 	/* Can't force-detach when BPF link is active */
 	err = bpf_set_link_xdp_fd(IFINDEX_LO, -1, 0);
-	if (CHECK(!err, "prog_detach_fail", "unexpected success\n"))
+	if (!ASSERT_ERR(err, "prog_detach_fail"))
 		goto cleanup;
 
 	/* BPF link is not allowed to replace another BPF link */
@@ -110,40 +110,34 @@ void serial_test_xdp_link(void)
 	skel2->links.xdp_handler = link;
 
 	err = bpf_get_link_xdp_id(IFINDEX_LO, &id0, 0);
-	if (CHECK(err || id0 != id2, "id2_check",
-		  "loaded prog id %u != id2 %u, err %d", id0, id1, err))
+	if (!ASSERT_OK(err, "id2_check_err") || !ASSERT_EQ(id0, id2, "id2_check_val"))
 		goto cleanup;
 
 	/* updating program under active BPF link works as expected */
 	err = bpf_link__update_program(link, skel1->progs.xdp_handler);
-	if (CHECK(err, "link_upd", "failed: %d\n", err))
+	if (!ASSERT_OK(err, "link_upd"))
 		goto cleanup;
 
 	memset(&link_info, 0, sizeof(link_info));
 	err = bpf_obj_get_info_by_fd(bpf_link__fd(link), &link_info, &link_info_len);
-	if (CHECK(err, "link_info", "failed: %d\n", err))
+	if (!ASSERT_OK(err, "link_info"))
 		goto cleanup;
 
-	CHECK(link_info.type != BPF_LINK_TYPE_XDP, "link_type",
-	      "got %u != exp %u\n", link_info.type, BPF_LINK_TYPE_XDP);
-	CHECK(link_info.prog_id != id1, "link_prog_id",
-	      "got %u != exp %u\n", link_info.prog_id, id1);
-	CHECK(link_info.xdp.ifindex != IFINDEX_LO, "link_ifindex",
-	      "got %u != exp %u\n", link_info.xdp.ifindex, IFINDEX_LO);
+	ASSERT_EQ(link_info.type, BPF_LINK_TYPE_XDP, "link_type");
+	ASSERT_EQ(link_info.prog_id, id1, "link_prog_id");
+	ASSERT_EQ(link_info.xdp.ifindex, IFINDEX_LO, "link_ifindex");
 
 	err = bpf_link__detach(link);
-	if (CHECK(err, "link_detach", "failed %d\n", err))
+	if (!ASSERT_OK(err, "link_detach"))
 		goto cleanup;
 
 	memset(&link_info, 0, sizeof(link_info));
 	err = bpf_obj_get_info_by_fd(bpf_link__fd(link), &link_info, &link_info_len);
-	if (CHECK(err, "link_info", "failed: %d\n", err))
-		goto cleanup;
-	CHECK(link_info.prog_id != id1, "link_prog_id",
-	      "got %u != exp %u\n", link_info.prog_id, id1);
+
+	ASSERT_OK(err, "link_info");
+	ASSERT_EQ(link_info.prog_id, id1, "link_prog_id");
 	/* ifindex should be zeroed out */
-	CHECK(link_info.xdp.ifindex != 0, "link_ifindex",
-	      "got %u != exp %u\n", link_info.xdp.ifindex, 0);
+	ASSERT_EQ(link_info.xdp.ifindex, 0, "link_ifindex");
 
 cleanup:
 	test_xdp_link__destroy(skel1);
Signature · 1 line
2.34.1
#2 lore raw

PATCH v2 3/3 bpf/selftests: Add check for updating XDP bpf_link with wrong program type

In reply to Toke Høiland-Jørgensen

Add a check to the xdp_link selftest that the kernel rejects replacing an XDP program with a different program type on link update.

v2:
- Split this out into its own patch.

---
 tools/testing/selftests/bpf/prog_tests/xdp_link.c | 5 +++++
 tools/testing/selftests/bpf/progs/test_xdp_link.c | 6 ++++++
 2 files changed, 11 insertions(+)
tools/testing/selftests/bpf/prog_tests/xdp_link.c +5 -0
index eec0bf83546b..b2b357f8c74c 100644
@@ -127,6 +127,11 @@ void serial_test_xdp_link(void)
 	ASSERT_EQ(link_info.prog_id, id1, "link_prog_id");
 	ASSERT_EQ(link_info.xdp.ifindex, IFINDEX_LO, "link_ifindex");
 
+	/* updating program under active BPF link with different type fails */
+	err = bpf_link__update_program(link, skel1->progs.tc_handler);
+	if (!ASSERT_ERR(err, "link_upd_invalid"))
+		goto cleanup;
+
 	err = bpf_link__detach(link);
 	if (!ASSERT_OK(err, "link_detach"))
 		goto cleanup;
tools/testing/selftests/bpf/progs/test_xdp_link.c +6 -0
index ee7d6ac0f615..64ff32eaae92 100644
@@ -10,3 +10,9 @@ int xdp_handler(struct xdp_md *xdp)
 {
 	return 0;
 }
+
+SEC("tc")
+int tc_handler(struct __sk_buff *skb)
+{
+	return 0;
+}
Signature · 1 line
2.34.1
#3 lore raw
In reply to Toke Høiland-Jørgensen
Quoted 7 lines · Toke Høiland-Jørgensen

The bpf_xdp_link_update() function didn't check the program type before updating the program, which made it possible to install any program type as an XDP program, which is obviously not good. Syzbot managed to trigger this by swapping in an LWT program on the XDP hook which would crash in a helper call.

Quoted 6 lines

Fix this by adding a check and bailing out if the types don't match.

Fixes 026a4c28e1db ("bpf, xdp: Implement LINK_UPDATE for BPF XDP link")
Reported-by [email protected]

Thanks a lot for the quick fix!
The merge window is about to begin.
We will land it as soon as possible when bpf tree will be ready to accept fixes.

#4 lore raw
Quoted 15 lines · Alexei Starovoitov
Quoted 7 lines · Toke Høiland-Jørgensen

The bpf_xdp_link_update() function didn't check the program type before updating the program, which made it possible to install any program type as an XDP program, which is obviously not good. Syzbot managed to trigger this by swapping in an LWT program on the XDP hook which would crash in a helper call.

Quoted 6 lines

Fix this by adding a check and bailing out if the types don't match.

Fixes 026a4c28e1db ("bpf, xdp: Implement LINK_UPDATE for BPF XDP link")
Reported-by [email protected]
Quoted 4 lines

Thanks a lot for the quick fix!
The merge window is about to begin.
We will land it as soon as possible when bpf tree will be ready to accept fixes.

You're welcome! That's fine; FWIW, I believe the patch applies cleanly to bpf-next as well, if that makes things easier on your end :)

-Toke

#5 lore raw
In reply to Alexei Starovoitov
Quoted 16 lines · Alexei Starovoitov
Quoted 7 lines · Toke Høiland-Jørgensen

The bpf_xdp_link_update() function didn't check the program type before updating the program, which made it possible to install any program type as an XDP program, which is obviously not good. Syzbot managed to trigger this by swapping in an LWT program on the XDP hook which would crash in a helper call.

Quoted 6 lines

Fix this by adding a check and bailing out if the types don't match.

Fixes 026a4c28e1db ("bpf, xdp: Implement LINK_UPDATE for BPF XDP link")
Reported-by [email protected]
Quoted 4 lines

Thanks a lot for the quick fix!
The merge window is about to begin.
We will land it as soon as possible when bpf tree will be ready to accept fixes.

Applied to bpf tree.