Skip to contentSkip to conversation

ARM: dts: msm8960: move vsdcc regulator out of simple-bus

PATCH Applied David Heidelberg 2 participants 2 messages Jan 8, 2022 – Feb 1, 2022

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ARM: dts: msm8960: move vsdcc regulator out of simple-bus

It is not recommended to place regulator nodes inside simple-bus, so move it out in order to fix the warnings generated by dtschema/schemas/simple-bus.yaml schema.

---
 arch/arm/boot/dts/qcom-msm8960.dtsi | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)
arch/arm/boot/dts/qcom-msm8960.dtsi +9 -9
index 25ff1f5fffcf..e008b6df108f 100644
@@ -78,6 +78,15 @@ sleep_clk {
 		};
 	};
 
+	/* Temporary fixed regulator */
+	vsdcc_fixed: vsdcc-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "SDCC Power";
+		regulator-min-microvolt = <2700000>;
+		regulator-max-microvolt = <2700000>;
+		regulator-always-on;
+	};
+
 	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -252,15 +261,6 @@ rng@1a500000 {
 			clock-names = "core";
 		};
 
-		/* Temporary fixed regulator */
-		vsdcc_fixed: vsdcc-regulator {
-			compatible = "regulator-fixed";
-			regulator-name = "SDCC Power";
-			regulator-min-microvolt = <2700000>;
-			regulator-max-microvolt = <2700000>;
-			regulator-always-on;
-		};
-
 		amba {
 			compatible = "simple-bus";
 			#address-cells = <1>;
Signature · 1 line
2.34.1
#1 lore raw

Re: (subset) [PATCH] ARM: dts: msm8960: move vsdcc regulator out of simple-bus

Quoted 5 lines · David Heidelberg

It is not recommended to place regulator nodes inside simple-bus, so move it out in order to fix the warnings generated by dtschema/schemas/simple-bus.yaml schema.

Applied, thanks!

[1/1] ARM: dts: msm8960: move vsdcc regulator out of simple-bus

      commit: 96b2f11780d550e68dc1a5276861eb6eb3378b0c

Best regards,

Signature · 1 line
Bjorn Andersson <[email protected]>