Skip to contentSkip to conversation

dt-bindings: msm/mdp4: convert to yaml format

PATCH Applied David Heidelberg 2 participants 2 messages Jan 9, 2022 – Jan 21, 2022

Subsystems (5)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 dt-bindings: msm/mdp4: convert to yaml format

Convert mdp4 binding into yaml format.

---
 .../devicetree/bindings/display/msm/mdp4.txt  | 114 ----------------
 .../devicetree/bindings/display/msm/mdp4.yaml | 124 ++++++++++++++++++
 2 files changed, 124 insertions(+), 114 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/display/msm/mdp4.txt
 create mode 100644 Documentation/devicetree/bindings/display/msm/mdp4.yaml
Documentation/devicetree/bindings/display/msm/mdp4.txt deleted +0 -114
deleted file mode 100644
index b07eeb38f709..000000000000
@@ -1,114 +0,0 @@
-Qualcomm adreno/snapdragon MDP4 display controller
-
-Description:
-
-This is the bindings documentation for the MDP4 display controller found in
-SoCs like MSM8960, APQ8064 and MSM8660.
-
-Required properties:
-- compatible:
-  * "qcom,mdp4" - mdp4
-- reg: Physical base address and length of the controller's registers.
-- interrupts: The interrupt signal from the display controller.
-- clocks: device clocks
-  See ../clocks/clock-bindings.txt for details.
-- clock-names: the following clocks are required.
-  * "core_clk"
-  * "iface_clk"
-  * "bus_clk"
-  * "lut_clk"
-  * "hdmi_clk"
-  * "tv_clk"
-- ports: contains the list of output ports from MDP. These connect to interfaces
-  that are external to the MDP hardware, such as HDMI, DSI, EDP etc (LVDS is a
-  special case since it is a part of the MDP block itself).
-
-  Each output port contains an endpoint that describes how it is connected to an
-  external interface. These are described by the standard properties documented
-  here:
-	Documentation/devicetree/bindings/graph.txt
-	Documentation/devicetree/bindings/media/video-interfaces.txt
-
-  The output port mappings are:
-	Port 0 -> LCDC/LVDS
-	Port 1 -> DSI1 Cmd/Video
-	Port 2 -> DSI2 Cmd/Video
-	Port 3 -> DTV
-
-Optional properties:
-- clock-names: the following clocks are optional:
-  * "lut_clk"
-- qcom,lcdc-align-lsb: Boolean value indicating that LSB alignment should be
-  used for LCDC. This is only valid for 18bpp panels.
-
-Example:
-
-/ {
-	...
-
-	hdmi: hdmi@4a00000 {
-		...
-		ports {
-			...
-			port@0 {
-				reg = <0>;
-				hdmi_in: endpoint {
-					remote-endpoint = <&mdp_dtv_out>;
-				};
-			};
-			...
-		};
-		...
-	};
-
-	...
-
-	mdp: mdp@5100000 {
-		compatible = "qcom,mdp4";
-		reg = <0x05100000 0xf0000>;
-		interrupts = <GIC_SPI 75 0>;
-		clock-names =
-		    "core_clk",
-		    "iface_clk",
-		    "lut_clk",
-		    "hdmi_clk",
-		    "tv_clk";
-		clocks =
-		    <&mmcc MDP_CLK>,
-		    <&mmcc MDP_AHB_CLK>,
-		    <&mmcc MDP_AXI_CLK>,
-		    <&mmcc MDP_LUT_CLK>,
-		    <&mmcc HDMI_TV_CLK>,
-		    <&mmcc MDP_TV_CLK>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					mdp_lvds_out: endpoint {
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-					mdp_dsi1_out: endpoint {
-					};
-				};
-
-				port@2 {
-					reg = <2>;
-					mdp_dsi2_out: endpoint {
-					};
-				};
-
-				port@3 {
-					reg = <3>;
-					mdp_dtv_out: endpoint {
-						remote-endpoint = <&hdmi_in>;
-					};
-				};
-		};
-	};
-};
Documentation/devicetree/bindings/display/msm/mdp4.yaml new file +124 -0

124 lines not on this page · raw message

Signature · 1 line
2.34.1
maintainer Applied
#1 lore raw
Quoted 10 lines · David Heidelberg

Convert mdp4 binding into yaml format.

---
 .../devicetree/bindings/display/msm/mdp4.txt  | 114 ----------------
 .../devicetree/bindings/display/msm/mdp4.yaml | 124 ++++++++++++++++++
 2 files changed, 124 insertions(+), 114 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/display/msm/mdp4.txt
 create mode 100644 Documentation/devicetree/bindings/display/msm/mdp4.yaml

Applied, thanks!