Skip to contentSkip to conversation

configs/qemu: Add a ppc64le-powernv8 configuration

PATCH New Cédric Le Goater 1 participant 3 messages Jan 10, 2022 PowerPC

lore
Share & tools
lore
#0 lore raw

PATCH 1/3 configs/qemu: Add a ppc64le-powernv8 configuration

PowerNV is the platform using the OPAL [1] firmware on OpenPOWER systems. OPAL first loads a kernel and an initramfs image based on buildroot including a second boot loader petitboot [2]. The latter does device discovery and kexecs a new Linux image from disk or network.

QEMU implements PowerNV machines [3] for the POWER8, POWER9 and Power10 processors which are used for dev and tests. POWER8 images being compatible with POWER9 and Power10, simply add a single qemu_ppc64le_powernv8 board for all.

The QEMU script boots directly from a nvme disk because it is simple enough but a real system would boot from a ramfs first.

[1] https://github.com/open-power/skiboot/blob/master/doc/overview.rst
[2] https://github.com/open-power/petitboot/
[3] https://qemu.readthedocs.io/en/latest/system/ppc/powernv.html

---
 board/qemu/ppc64le-powernv8/readme.txt  |  5 +++++
 configs/qemu_ppc64le_powernv8_defconfig | 29 +++++++++++++++++++++++++
 2 files changed, 34 insertions(+)
 create mode 100644 board/qemu/ppc64le-powernv8/readme.txt
 create mode 100644 configs/qemu_ppc64le_powernv8_defconfig
board/qemu/ppc64le-powernv8/readme.txt new file +5 -0
new file mode 100644
index 000000000000..059f55fbc917
@@ -0,0 +1,5 @@
+Run the emulation with:
+
+qemu-system-ppc64 -M powernv9 -kernel vmlinux -append "console=hvc0 rootwait root=/dev/nvme0n1" -device nvme,bus=pcie.3,addr=0x0,drive=drive0,serial=1234 -drive file=./rootfs.ext2,if=none,id=drive0,format=raw,cache=none -device e1000e,netdev=net0,mac=C0:FF:EE:00:01:03,bus=pcie.1,addr=0x0  -netdev user,id=net0 -serial mon:stdio -nographic # qemu_ppc64le_powernv8_defconfig
+
+The login prompt will appear in the terminal window.
configs/qemu_ppc64le_powernv8_defconfig new file +29 -0
new file mode 100644
index 000000000000..d8ea6655fce0
@@ -0,0 +1,29 @@
+# Architecture
+BR2_powerpc64le=y
+BR2_powerpc_power8=y
+
+# System
+BR2_TARGET_GENERIC_GETTY_PORT="hvc0"
+BR2_SYSTEM_DHCP="eth0"
+
+# Filesystem
+BR2_TARGET_ROOTFS_EXT2=y
+# BR2_TARGET_ROOTFS_TAR is not set
+
+# Image
+BR2_ROOTFS_POST_IMAGE_SCRIPT="board/qemu/post-image.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_DEFCONFIG)"
+
+# Linux headers same as kernel
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_15=y
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15"
+BR2_LINUX_KERNEL_DEFCONFIG="powernv"
+BR2_LINUX_KERNEL_VMLINUX=y
+
+# host-qemu for gitlab testing
+BR2_PACKAGE_HOST_QEMU=y
+BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE=y
Signature · 6 lines
2.31.1

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
#1 lore raw

PATCH 2/3 configs/qemu: Add a ppc-bamboo configuration

The Bamboo board is an evaluation board for PowerPC 440EP CPUs.

---
 board/qemu/ppc-bamboo/linux.fragment |  6 +++++
 board/qemu/ppc-bamboo/readme.txt     |  5 ++++
 configs/qemu_ppc_bamboo_defconfig    | 36 ++++++++++++++++++++++++++++
 3 files changed, 47 insertions(+)
 create mode 100644 board/qemu/ppc-bamboo/linux.fragment
 create mode 100644 board/qemu/ppc-bamboo/readme.txt
 create mode 100644 configs/qemu_ppc_bamboo_defconfig
board/qemu/ppc-bamboo/linux.fragment new file +6 -0
new file mode 100644
index 000000000000..cc272d0541f0
@@ -0,0 +1,6 @@
+# Enable virtio (blk, rng and net devices)
+CONFIG_VIRTIO=y
+CONFIG_VIRTIO_PCI=y
+CONFIG_HW_RANDOM_VIRTIO=y
+CONFIG_VIRTIO_BLK=y
+CONFIG_VIRTIO_NET=y
board/qemu/ppc-bamboo/readme.txt new file +5 -0
new file mode 100644
index 000000000000..0b70d2fa5443
@@ -0,0 +1,5 @@
+Run the emulation with:
+
+qemu-system-ppc -nographic -M bamboo -kernel vmlinux -net nic,model=virtio-net-pci -net user # qemu_ppc_bamboo_defconfig
+
+The login prompt will appear in the terminal that started Qemu.
configs/qemu_ppc_bamboo_defconfig new file +36 -0
new file mode 100644
index 000000000000..d6abbeb45296
@@ -0,0 +1,36 @@
+# Architecture
+BR2_powerpc=y
+BR2_powerpc_440fp=y
+
+# System
+BR2_SYSTEM_DHCP="eth0"
+
+# Filesystem
+# BR2_TARGET_ROOTFS_TAR is not set
+BR2_TARGET_ROOTFS_INITRAMFS=y
+
+# Image
+BR2_ROOTFS_POST_IMAGE_SCRIPT="board/qemu/post-image.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_DEFCONFIG)"
+
+# Linux headers same as kernel
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_15=y
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15"
+BR2_LINUX_KERNEL_DEFCONFIG="44x/bamboo"
+BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/qemu/ppc-bamboo/linux.fragment"
+BR2_LINUX_KERNEL_VMLINUX=y
+
+# Serial port config
+BR2_TARGET_GENERIC_GETTY=y
+BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
+
+# Kernel needs mkimage
+BR2_PACKAGE_HOST_UBOOT_TOOLS=y
+
+# host-qemu for gitlab testing
+BR2_PACKAGE_HOST_QEMU=y
+BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE=y
Signature · 6 lines
2.31.1

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
#2 lore raw

PATCH 3/3 package/qemu: Add support for PPC970 processors

In reply to Cédric Le Goater

PPC970 processors are well supported by the QEMU pseries and macbook machines. The latest debian 11 (big endian) runs with SMP. Re-add support.

Fixes efc67deef38c ("qemu: remove support for some PowerPC processors in host qemu")
---
 package/qemu/Config.in.host | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
package/qemu/Config.in.host +1 -1
index df5d92112582..f9cdb9b70371 100644
@@ -22,7 +22,7 @@ config BR2_PACKAGE_HOST_QEMU_ARCH_SUPPORTS
 	default y if BR2_xtensa
 	default y if BR2_x86_64
 	depends on !BR2_x86_steamroller && !BR2_x86_core_avx2
-	depends on !BR2_powerpc_620 && !BR2_powerpc_630 && !BR2_powerpc_970
+	depends on !BR2_powerpc_620 && !BR2_powerpc_630
 
 config BR2_PACKAGE_HOST_QEMU_SYSTEM_ARCH_SUPPORTS
 	bool
Signature · 6 lines
2.31.1

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot