Skip to contentSkip to conversation

libvhost-user: Map shared RAM with MAP_NORESERVE to support virtio-mem with hugetlb

PATCH In review David Hildenbrand 2 participants 3 messages Jan 11, 2022 – Jan 17, 2022

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 libvhost-user: Map shared RAM with MAP_NORESERVE to support virtio-mem with hugetlb

For fd-based shared memory, MAP_NORESERVE is only effective for hugetlb, otherwise it's ignored. Older Linux versions that didn't support reservation of huge pages ignored MAP_NORESERVE completely.

The first client to mmap a hugetlb fd without MAP_NORESERVE will trigger reservation of huge pages for the whole mmapped range. There are two cases to consider:

1) QEMU mapped RAM without MAP_NORESERVE

We're not dealing with a sparse mapping, huge pages for the whole range have already been reserved by QEMU. An additional mmap() without MAP_NORESERVE won't have any effect on the reservation.

2) QEMU mapped RAM with MAP_NORESERVE

We're delaing with a sparse mapping, no huge pages should be reserved. Further mappings without MAP_NORESERVE should be avoided.

For 1), it doesn't matter if we set MAP_NORESERVE or not, so we can simply set it. For 2), we'd be overriding QEMUs decision and trigger reservation of huge pages, which might just fail if there are not sufficient huge pages around. We must map with MAP_NORESERVE.

This change is required to support virtio-mem with hugetlb: a virtio-mem device mapped into the guest physical memory corresponds to a sparse memory mapping and QEMU maps this memory with MAP_NORESERVE. Whenever memory in that sparse region will be accessed by the VM, QEMU populates huge pages for the affected range by preallocating memory and handling any preallocation errors gracefully.

So let's map shared RAM with MAP_NORESERVE. As libvhost-user only supports Linux, there shouldn't be anything to take care of in regard of other OS support.

Without this change, libvhost-user will fail mapping the region if there are currently not enough huge pages to perform the reservation:
fv_panic: libvhost-user: region mmap error: Cannot allocate memory

Cc "Marc-André Lureau" <[email protected]>
Cc "Michael S. Tsirkin" <[email protected]>
Cc Paolo Bonzini <[email protected]>
Cc Raphael Norwitz <[email protected]>
Cc Stefan Hajnoczi <[email protected]>
Cc Dr. David Alan Gilbert <[email protected]>
---
 subprojects/libvhost-user/libvhost-user.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
subprojects/libvhost-user/libvhost-user.c +5 -5
index 787f4d2d4f..3b538930be 100644
@@ -728,12 +728,12 @@ vu_add_mem_reg(VuDev *dev, VhostUserMsg *vmsg) {
          * accessing it before we userfault.
          */
         mmap_addr = mmap(0, dev_region->size + dev_region->mmap_offset,
-                         PROT_NONE, MAP_SHARED,
+                         PROT_NONE, MAP_SHARED | MAP_NORESERVE,
                          vmsg->fds[0], 0);
     } else {
         mmap_addr = mmap(0, dev_region->size + dev_region->mmap_offset,
-                         PROT_READ | PROT_WRITE, MAP_SHARED, vmsg->fds[0],
-                         0);
+                         PROT_READ | PROT_WRITE, MAP_SHARED | MAP_NORESERVE,
+                         vmsg->fds[0], 0);
     }
 
     if (mmap_addr == MAP_FAILED) {
@@ -878,7 +878,7 @@ vu_set_mem_table_exec_postcopy(VuDev *dev, VhostUserMsg *vmsg)
          * accessing it before we userfault
          */
         mmap_addr = mmap(0, dev_region->size + dev_region->mmap_offset,
-                         PROT_NONE, MAP_SHARED,
+                         PROT_NONE, MAP_SHARED | MAP_NORESERVE,
                          vmsg->fds[i], 0);
 
         if (mmap_addr == MAP_FAILED) {
@@ -965,7 +965,7 @@ vu_set_mem_table_exec(VuDev *dev, VhostUserMsg *vmsg)
          * mapped address has to be page aligned, and we use huge
          * pages.  */
         mmap_addr = mmap(0, dev_region->size + dev_region->mmap_offset,
-                         PROT_READ | PROT_WRITE, MAP_SHARED,
+                         PROT_READ | PROT_WRITE, MAP_SHARED | MAP_NORESERVE,
                          vmsg->fds[i], 0);
 
         if (mmap_addr == MAP_FAILED) {
Signature · 1 line
2.33.1
#1 lore raw
Quoted 39 lines · David Hildenbrand

For fd-based shared memory, MAP_NORESERVE is only effective for hugetlb, otherwise it's ignored. Older Linux versions that didn't support reservation of huge pages ignored MAP_NORESERVE completely.

The first client to mmap a hugetlb fd without MAP_NORESERVE will trigger reservation of huge pages for the whole mmapped range. There are two cases to consider:

1) QEMU mapped RAM without MAP_NORESERVE

We're not dealing with a sparse mapping, huge pages for the whole range have already been reserved by QEMU. An additional mmap() without MAP_NORESERVE won't have any effect on the reservation.

2) QEMU mapped RAM with MAP_NORESERVE

We're delaing with a sparse mapping, no huge pages should be reserved. Further mappings without MAP_NORESERVE should be avoided.

For 1), it doesn't matter if we set MAP_NORESERVE or not, so we can simply set it. For 2), we'd be overriding QEMUs decision and trigger reservation of huge pages, which might just fail if there are not sufficient huge pages around. We must map with MAP_NORESERVE.

This change is required to support virtio-mem with hugetlb: a virtio-mem device mapped into the guest physical memory corresponds to a sparse memory mapping and QEMU maps this memory with MAP_NORESERVE. Whenever memory in that sparse region will be accessed by the VM, QEMU populates huge pages for the affected range by preallocating memory and handling any preallocation errors gracefully.

So let's map shared RAM with MAP_NORESERVE. As libvhost-user only supports Linux, there shouldn't be anything to take care of in regard of other OS support.

Without this change, libvhost-user will fail mapping the region if there are currently not enough huge pages to perform the reservation:
fv_panic: libvhost-user: region mmap error: Cannot allocate memory

Quoted 8 lines
Cc "Marc-André Lureau" <[email protected]>
Cc "Michael S. Tsirkin" <[email protected]>
Cc Paolo Bonzini <[email protected]>
Cc Raphael Norwitz <[email protected]>
Cc Stefan Hajnoczi <[email protected]>
Cc Dr. David Alan Gilbert <[email protected]>

---

Note: I was assuming rust vhost-user-backend would need similar care, but vm-memory already does the right thing by supplying MAP_NORESERVE:

https://github.com/rust-vmm/vm-memory/blob/7a5e0696dc4170f590ac9b837e65cc4136b30e38/src/mmap_unix.rs#L264

Signature · 3 lines
Thanks,

David / dhildenb
Acked-by on v1 1/1
#2 lore raw
In reply to David Hildenbrand
Quoted 80 lines · David Hildenbrand

For fd-based shared memory, MAP_NORESERVE is only effective for hugetlb, otherwise it's ignored. Older Linux versions that didn't support reservation of huge pages ignored MAP_NORESERVE completely.

The first client to mmap a hugetlb fd without MAP_NORESERVE will trigger reservation of huge pages for the whole mmapped range. There are two cases to consider:

1) QEMU mapped RAM without MAP_NORESERVE

We're not dealing with a sparse mapping, huge pages for the whole range have already been reserved by QEMU. An additional mmap() without MAP_NORESERVE won't have any effect on the reservation.

2) QEMU mapped RAM with MAP_NORESERVE

We're delaing with a sparse mapping, no huge pages should be reserved. Further mappings without MAP_NORESERVE should be avoided.

For 1), it doesn't matter if we set MAP_NORESERVE or not, so we can simply set it. For 2), we'd be overriding QEMUs decision and trigger reservation of huge pages, which might just fail if there are not sufficient huge pages around. We must map with MAP_NORESERVE.

This change is required to support virtio-mem with hugetlb: a virtio-mem device mapped into the guest physical memory corresponds to a sparse memory mapping and QEMU maps this memory with MAP_NORESERVE. Whenever memory in that sparse region will be accessed by the VM, QEMU populates huge pages for the affected range by preallocating memory and handling any preallocation errors gracefully.

So let's map shared RAM with MAP_NORESERVE. As libvhost-user only supports Linux, there shouldn't be anything to take care of in regard of other OS support.

Without this change, libvhost-user will fail mapping the region if there are currently not enough huge pages to perform the reservation:
fv_panic: libvhost-user: region mmap error: Cannot allocate memory

Cc "Marc-André Lureau" <[email protected]>
Cc "Michael S. Tsirkin" <[email protected]>
Cc Paolo Bonzini <[email protected]>
Cc Raphael Norwitz <[email protected]>
Cc Stefan Hajnoczi <[email protected]>
Cc Dr. David Alan Gilbert <[email protected]>
---
 subprojects/libvhost-user/libvhost-user.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
subprojects/libvhost-user/libvhost-user.c +4 -4
index 787f4d2d4f..3b538930be 100644
@@ -728,12 +728,12 @@ vu_add_mem_reg(VuDev *dev, VhostUserMsg *vmsg) {
          * accessing it before we userfault.
          */
         mmap_addr = mmap(0, dev_region->size + dev_region->mmap_offset,
-                         PROT_NONE, MAP_SHARED,
+                         PROT_NONE, MAP_SHARED | MAP_NORESERVE,
                          vmsg->fds[0], 0);
     } else {
         mmap_addr = mmap(0, dev_region->size + dev_region->mmap_offset,
-                         PROT_READ | PROT_WRITE, MAP_SHARED, vmsg->fds[0],
-                         0);
+                         PROT_READ | PROT_WRITE, MAP_SHARED | MAP_NORESERVE,
+                         vmsg->fds[0], 0);
     }
 
     if (mmap_addr == MAP_FAILED) {
@@ -878,7 +878,7 @@ vu_set_mem_table_exec_postcopy(VuDev *dev, VhostUserMsg *vmsg)
          * accessing it before we userfault
          */
         mmap_addr = mmap(0, dev_region->size + dev_region->mmap_offset,
-                         PROT_NONE, MAP_SHARED,
+                         PROT_NONE, MAP_SHARED | MAP_NORESERVE,
                          vmsg->fds[i], 0);
 
         if (mmap_addr == MAP_FAILED) {

subprojects/libvhost-user/libvhost-user.c vu_set_mem_table_exec(VuDev *dev, VhostUserMsg *vmsg) · line 971

Quoted 8 lines
subprojects/libvhost-user/libvhost-user.c +1 -1
@@ -965,7 +965,7 @@ vu_set_mem_table_exec(VuDev *dev, VhostUserMsg *vmsg)
          * mapped address has to be page aligned, and we use huge
          * pages.  */
         mmap_addr = mmap(0, dev_region->size + dev_region->mmap_offset,
-                         PROT_READ | PROT_WRITE, MAP_SHARED,
+                         PROT_READ | PROT_WRITE, MAP_SHARED | MAP_NORESERVE,
                          vmsg->fds[i], 0);
 
         if (mmap_addr == MAP_FAILED) {