ARM: dts: sunxi: h3/h5: add r_uart node
Subsystems (2)
PATCH 1/1 ARM: dts: sunxi: h3/h5: add r_uart node
There is an additional UART in the PL I/O block.
Add a node and pinmux for it.
Signed-off-by Mans Rullgard <[email protected]>
---
The "documentation" doesn't mention any DMA channels for this UART. If it nonetheless does have DMA capability and someone knows the channel assignments, feel free to amend.
--- arch/arm/boot/dts/sunxi-h3-h5.dtsi | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+)
arch/arm/boot/dts/sunxi-h3-h5.dtsi +18 -0
@@ -884,6 +884,19 @@ r_i2c: i2c@1f02400 { #size-cells = <0>; }; + r_uart: serial@1f02800 { + compatible = "snps,dw-apb-uart"; + reg = <0x01f02800 0x400>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&r_ccu CLK_APB0_UART>; + resets = <&r_ccu RST_APB0_UART>; + pinctrl-names = "default"; + pinctrl-0 = <&r_uart_pins>; + status = "disabled"; + }; + r_pio: pinctrl@1f02c00 { compatible = "allwinner,sun8i-h3-r-pinctrl"; reg = <0x01f02c00 0x400>;
@@ -909,6 +922,11 @@ r_pwm_pin: r-pwm-pin { pins = "PL10"; function = "s_pwm"; }; + + r_uart_pins: r-uart-pins { + pins = "PL2", "PL3"; + function = "s_uart"; + }; }; r_pwm: pwm@1f03800 {
Signature · 7 lines
2.34.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: (subset) [PATCH] ARM: dts: sunxi: h3/h5: add r_uart node
Quoted 4 lines · Mans Rullgard
There is an additional UART in the PL I/O block.
Add a node and pinmux for it.
Applied to local tree (sunxi/dt-for-5.18).
Thanks!
Maxime