Add specification exception tests
v4 cover Add specification exception tests
Test that specification exceptions cause the correct interruption code during both normal and transactional execution.
v3 -> v4
remove iterations argument in order to simplify the code
for manual performance testing adding a for loop is easy
move report out of fixup_invalid_psw simplify/improve readability of triggers
use positive error values
v2 -> v3
remove non-ascii symbol
clean up load_psw
fix nits
v1 -> v2
Add license and test description
Split test patch into normal test and transactional execution test Add comments to
invalid PSW fixup function
with_transaction
Rename some variables/functions
Pass mask as single parameter to asm
Get rid of report_info_if macro
Introduce report_pass/fail and use them
Janis Schoetterl-Glausch (2):
s390x: Add specification exception test
s390x: Test specification exceptions during transaction
s390x/Makefile | 1 + lib/s390x/asm/arch_def.h | 1 + s390x/spec_ex.c | 323 +++++++++++++++++++++++++++++++++++++++ s390x/unittests.cfg | 3 + 4 files changed, 328 insertions(+) create mode 100644 s390x/spec_ex.c
Range-diff against v3:
1: 75d0bf1 ! 1: a242e84 s390x: Add specification exception test
@@ Commit message
s390x: Add specification exception test
Generate specification exceptions and check that they occur.
- With the iterations argument one can check if specification
- exception interpretation occurs, e.g. by using a high value and
- checking that the debugfs counters are substantially lower.
- The argument is also useful for estimating the performance benefit
- of interpretation.
Signed-off-by: Janis Schoetterl-Glausch <[email protected]>
## s390x/Makefile ##
-@@ s390x/Makefile: tests += $(TEST_DIR)/mvpg.elf
- tests += $(TEST_DIR)/uv-host.elf
+@@ s390x/Makefile: tests += $(TEST_DIR)/uv-host.elf
tests += $(TEST_DIR)/edat.elf
tests += $(TEST_DIR)/mvpg-sie.elf
+ tests += $(TEST_DIR)/spec_ex-sie.elf
+tests += $(TEST_DIR)/spec_ex.elf
+ tests += $(TEST_DIR)/firq.elf
tests_binary = $(patsubst %.elf,%.bin,$(tests))
- ifneq ($(HOST_KEY_DOCUMENT),)
## s390x/spec_ex.c (new) ##
@@
@@ s390x/spec_ex.c (new)
+ *
+ * Specification exception test.
+ * Tests that specification exceptions occur when expected.
++ *
++ * Can be extended by adding triggers to spec_ex_triggers, see comments below.
+ */
+#include <stdlib.h>
+#include <libcflat.h>
+#include <asm/interrupt.h>
-+#include <asm/facility.h>
+
+static struct lowcore *lc = (struct lowcore *) 0;
+
-+static bool expect_invalid_psw;
++static bool invalid_psw_expected;
+static struct psw expected_psw;
++static struct psw invalid_psw;
+static struct psw fixup_psw;
+
+/* The standard program exception handler cannot deal with invalid old PSWs,
@@ s390x/spec_ex.c (new)
+ */
+static void fixup_invalid_psw(void)
+{
-+ if (expect_invalid_psw) {
-+ report(expected_psw.mask == lc->pgm_old_psw.mask
-+ && expected_psw.addr == lc->pgm_old_psw.addr,
-+ "Invalid program new PSW as expected");
-+ expect_invalid_psw = false;
-+ }
++ // signal occurrence of invalid psw fixup
++ invalid_psw_expected = false;
++ invalid_psw = lc->pgm_old_psw;
+ lc->pgm_old_psw = fixup_psw;
+}
+
+/* Load possibly invalid psw, but setup fixup_psw before,
+ * so that *fixup_invalid_psw() can bring us back onto the right track.
++ * Also acts as compiler barrier, -> none required in expect/check_invalid_psw
+ */
+static void load_psw(struct psw psw)
+{
+ uint64_t scratch;
+
+ fixup_psw.mask = extract_psw_mask();
-+ asm volatile (
-+ " larl %[scratch],nop%=\n"
++ asm volatile ( "larl %[scratch],nop%=\n"
+ " stg %[scratch],%[addr]\n"
+ " lpswe %[psw]\n"
+ "nop%=: nop\n"
@@ s390x/spec_ex.c (new)
+ );
+}
+
-+static void psw_bit_12_is_1(void)
++static void expect_invalid_psw(struct psw psw)
+{
-+ expected_psw.mask = 0x0008000000000000;
-+ expected_psw.addr = 0x00000000deadbeee;
-+ expect_invalid_psw = true;
++ expected_psw = psw;
++ invalid_psw_expected = true;
++}
++
++static int check_invalid_psw(void)
++{
++ // toggled to signal occurrence of invalid psw fixup
++ if (!invalid_psw_expected) {
++ if (expected_psw.mask == invalid_psw.mask &&
++ expected_psw.addr == invalid_psw.addr)
++ return 0;
++ report_fail("Wrong invalid PSW");
++ } else {
++ report_fail("Expected exception due to invalid PSW");
++ }
++ return 1;
++}
++
++static int psw_bit_12_is_1(void)
++{
++ struct psw invalid = { .mask = 0x0008000000000000, .addr = 0x00000000deadbeee};
++
++ expect_invalid_psw(invalid);
+ load_psw(expected_psw);
++ return check_invalid_psw();
+}
+
-+static void bad_alignment(void)
++static int bad_alignment(void)
+{
-+ uint32_t words[5] = {0, 0, 0};
-+ uint32_t (*bad_aligned)[4];
-+
-+ register uint64_t r1 asm("6");
-+ register uint64_t r2 asm("7");
-+ if (((uintptr_t)&words[0]) & 0xf)
-+ bad_aligned = (uint32_t (*)[4])&words[0];
-+ else
-+ bad_aligned = (uint32_t (*)[4])&words[1];
-+ asm volatile ("lpq %0,%2"
-+ : "=r"(r1), "=r"(r2)
-+ : "T"(*bad_aligned)
++ uint32_t words[5] __attribute__((aligned(16)));
++ uint32_t (*bad_aligned)[4] = (uint32_t (*)[4])&words[1];
++
++ asm volatile ("lpq %%r6,%[bad]"
++ : : [bad] "T"(*bad_aligned)
++ : "%r6", "%r7"
+ );
++ return 0;
+}
+
-+static void not_even(void)
++static int not_even(void)
+{
-+ uint64_t quad[2];
++ uint64_t quad[2] __attribute__((aligned(16))) = {0};
+
-+ register uint64_t r1 asm("7");
-+ register uint64_t r2 asm("8");
-+ asm volatile (".insn rxy,0xe3000000008f,%0,%2" //lpq %0,%2
-+ : "=r"(r1), "=r"(r2)
-+ : "T"(quad)
++ asm volatile (".insn rxy,0xe3000000008f,%%r7,%[quad]" //lpq %%r7,%[quad]
++ : : [quad] "T"(quad)
++ : "%r7", "%r8"
+ );
++ return 0;
+}
+
++/*
++ * Harness for specification exception testing.
++ * func only triggers exception, reporting is taken care of automatically.
++ */
+struct spec_ex_trigger {
+ const char *name;
-+ void (*func)(void);
++ int (*func)(void);
+ void (*fixup)(void);
+};
+
++/* List of all tests to execute */
+static const struct spec_ex_trigger spec_ex_triggers[] = {
-+ { "psw_bit_12_is_1", &psw_bit_12_is_1, &fixup_invalid_psw},
-+ { "bad_alignment", &bad_alignment, NULL},
-+ { "not_even", ¬_even, NULL},
-+ { NULL, NULL, NULL},
++ { "psw_bit_12_is_1", &psw_bit_12_is_1, &fixup_invalid_psw },
++ { "bad_alignment", &bad_alignment, NULL },
++ { "not_even", ¬_even, NULL },
++ { NULL, NULL, NULL },
+};
+
-+struct args {
-+ uint64_t iterations;
-+};
-+
-+static void test_spec_ex(struct args *args,
-+ const struct spec_ex_trigger *trigger)
++static void test_spec_ex(const struct spec_ex_trigger *trigger)
+{
+ uint16_t expected_pgm = PGM_INT_CODE_SPECIFICATION;
+ uint16_t pgm;
-+ unsigned int i;
-+
-+ for (i = 0; i < args->iterations; i++) {
-+ expect_pgm_int();
-+ register_pgm_cleanup_func(trigger->fixup);
-+ trigger->func();
-+ register_pgm_cleanup_func(NULL);
-+ pgm = clear_pgm_int();
-+ if (pgm != expected_pgm) {
-+ report_fail("Program interrupt: expected(%d) == received(%d)",
-+ expected_pgm,
-+ pgm);
-+ return;
-+ }
-+ }
-+ report_pass("Program interrupt: always expected(%d) == received(%d)",
-+ expected_pgm,
-+ expected_pgm);
-+}
-+
-+static struct args parse_args(int argc, char **argv)
-+{
-+ struct args args = {
-+ .iterations = 1,
-+ };
-+ unsigned int i;
-+ long arg;
-+ bool no_arg;
-+ char *end;
-+
-+ for (i = 1; i < argc; i++) {
-+ no_arg = true;
-+ if (i < argc - 1) {
-+ no_arg = *argv[i + 1] == '\0';
-+ arg = strtol(argv[i + 1], &end, 10);
-+ no_arg |= *end != '\0';
-+ no_arg |= arg < 0;
-+ }
-+
-+ if (!strcmp("--iterations", argv[i])) {
-+ if (no_arg)
-+ report_abort("--iterations needs a positive parameter");
-+ args.iterations = arg;
-+ ++i;
-+ } else {
-+ report_abort("Unsupported parameter '%s'",
-+ argv[i]);
-+ }
-+ }
-+ return args;
++ int rc;
++
++ expect_pgm_int();
++ register_pgm_cleanup_func(trigger->fixup);
++ rc = trigger->func();
++ register_pgm_cleanup_func(NULL);
++ if (rc)
++ return;
++ pgm = clear_pgm_int();
++ report(pgm == expected_pgm, "Program interrupt: expected(%d) == received(%d)",
++ expected_pgm, pgm);
+}
+
+int main(int argc, char **argv)
+{
+ unsigned int i;
+
-+ struct args args = parse_args(argc, argv);
-+
+ report_prefix_push("specification exception");
+ for (i = 0; spec_ex_triggers[i].name; i++) {
+ report_prefix_push(spec_ex_triggers[i].name);
-+ test_spec_ex(&args, &spec_ex_triggers[i]);
++ test_spec_ex(&spec_ex_triggers[i]);
+ report_prefix_pop();
+ }
+ report_prefix_pop();
@@ s390x/spec_ex.c (new)
+}
## s390x/unittests.cfg ##
-@@ s390x/unittests.cfg: file = edat.elf
+@@ s390x/unittests.cfg: file = mvpg-sie.elf
+ [spec_ex-sie]
+ file = spec_ex-sie.elf
- [mvpg-sie]
- file = mvpg-sie.elf
-+
+[spec_ex]
+file = spec_ex.elf
++
+ [firq-linear-cpu-ids]
+ file = firq.elf
+ timeout = 20
2: 0593951 ! 2: 16ce8bb s390x: Test specification exceptions during transaction
@@ s390x/spec_ex.c
+ * This includes specification exceptions occurring during transactional execution
+ * as these result in another interruption code (the transactional-execution-aborted
+ * bit is set).
+ *
+ * Can be extended by adding triggers to spec_ex_triggers, see comments below.
*/
#include <stdlib.h>
+#include <htmintrin.h>
#include <libcflat.h>
+#include <asm/barrier.h>
#include <asm/interrupt.h>
- #include <asm/facility.h>
++#include <asm/facility.h>
+
+ static struct lowcore *lc = (struct lowcore *) 0;
-@@ s390x/spec_ex.c: static void not_even(void)
+@@ s390x/spec_ex.c: static int not_even(void)
+ /*
+ * Harness for specification exception testing.
+ * func only triggers exception, reporting is taken care of automatically.
++ * If a trigger is transactable it will also be executed during a transaction.
+ */
struct spec_ex_trigger {
const char *name;
- void (*func)(void);
+ int (*func)(void);
+ bool transactable;
void (*fixup)(void);
};
+ /* List of all tests to execute */
static const struct spec_ex_trigger spec_ex_triggers[] = {
-- { "psw_bit_12_is_1", &psw_bit_12_is_1, &fixup_invalid_psw},
-- { "bad_alignment", &bad_alignment, NULL},
-- { "not_even", ¬_even, NULL},
-- { NULL, NULL, NULL},
-+ { "psw_bit_12_is_1", &psw_bit_12_is_1, false, &fixup_invalid_psw},
-+ { "bad_alignment", &bad_alignment, true, NULL},
-+ { "not_even", ¬_even, true, NULL},
-+ { NULL, NULL, true, NULL},
- };
-
- struct args {
- uint64_t iterations;
-+ uint64_t max_retries;
-+ uint64_t suppress_info;
-+ uint64_t max_failures;
-+ bool diagnose;
+- { "psw_bit_12_is_1", &psw_bit_12_is_1, &fixup_invalid_psw },
+- { "bad_alignment", &bad_alignment, NULL },
+- { "not_even", ¬_even, NULL },
+- { NULL, NULL, NULL },
++ { "psw_bit_12_is_1", &psw_bit_12_is_1, false, &fixup_invalid_psw },
++ { "bad_alignment", &bad_alignment, true, NULL },
++ { "not_even", ¬_even, true, NULL },
++ { NULL, NULL, false, NULL },
};
- static void test_spec_ex(struct args *args,
-@@ s390x/spec_ex.c: static void test_spec_ex(struct args *args,
- expected_pgm);
+ static void test_spec_ex(const struct spec_ex_trigger *trigger)
+@@ s390x/spec_ex.c: static void test_spec_ex(const struct spec_ex_trigger *trigger)
+ expected_pgm, pgm);
}
+#define TRANSACTION_COMPLETED 4
@@ s390x/spec_ex.c: static void test_spec_ex(struct args *args,
+ * being NULL to keep things simple
+ */
+static int __attribute__((nonnull))
-+with_transaction(void (*trigger)(void), struct __htm_tdb *diagnose)
++with_transaction(int (*trigger)(void), struct __htm_tdb *diagnose)
+{
+ int cc;
+
+ cc = __builtin_tbegin(diagnose);
+ if (cc == _HTM_TBEGIN_STARTED) {
++ /* return code is meaningless: transaction needs to complete
++ * in order to return and completion indicates a test failure
++ */
+ trigger();
+ __builtin_tend();
-+ return -TRANSACTION_COMPLETED;
++ return TRANSACTION_COMPLETED;
+ } else {
-+ return -cc;
++ return cc;
+ }
+}
+
@@ s390x/spec_ex.c: static void test_spec_ex(struct args *args,
+ for (i = 0; i < max_retries; i++) {
+ expect_pgm_int();
+ trans_result = with_transaction(trigger->func, tdb);
-+ if (trans_result == -_HTM_TBEGIN_TRANSIENT) {
++ if (trans_result == _HTM_TBEGIN_TRANSIENT) {
+ mb();
+ pgm = lc->pgm_int_code;
+ if (pgm == 0)
@@ s390x/spec_ex.c: static void test_spec_ex(struct args *args,
+ }
+ return trans_result;
+ }
-+ return -TRANSACTION_MAX_RETRIES;
++ return TRANSACTION_MAX_RETRIES;
+}
+
++struct args {
++ uint64_t max_retries;
++ bool diagnose;
++};
++
+static void test_spec_ex_trans(struct args *args, const struct spec_ex_trigger *trigger)
+{
+ const uint16_t expected_pgm = PGM_INT_CODE_SPECIFICATION
-+ | PGM_INT_CODE_TX_ABORTED_EVENT;
++ | PGM_INT_CODE_TX_ABORTED_EVENT;
+ union {
+ struct __htm_tdb tdb;
+ uint64_t dwords[sizeof(struct __htm_tdb) / sizeof(uint64_t)];
+ } diag;
-+ unsigned int i, failures = 0;
++ unsigned int i;
+ int trans_result;
+
+ if (!test_facility(73)) {
@@ s390x/spec_ex.c: static void test_spec_ex(struct args *args,
+ }
+ ctl_set_bit(0, CTL0_TRANSACT_EX_CTL); /* enable transactional-exec */
+
-+ for (i = 0; i < args->iterations && failures <= args->max_failures; i++) {
-+ register_pgm_cleanup_func(trigger->fixup);
-+ trans_result = retry_transaction(trigger, args->max_retries, &diag.tdb, expected_pgm);
-+ register_pgm_cleanup_func(NULL);
-+ switch (trans_result) {
-+ case 0:
-+ continue;
-+ case -_HTM_TBEGIN_INDETERMINATE:
-+ case -_HTM_TBEGIN_PERSISTENT:
-+ if (failures < args->suppress_info)
-+ report_info("transaction failed with cc %d",
-+ -trans_result);
-+ break;
-+ case -_HTM_TBEGIN_TRANSIENT:
-+ report_fail("Program interrupt: expected(%d) == received(%d)",
-+ expected_pgm,
-+ clear_pgm_int());
-+ goto out;
-+ case -TRANSACTION_COMPLETED:
-+ report_fail("Transaction completed without exception");
-+ goto out;
-+ case -TRANSACTION_MAX_RETRIES:
-+ if (failures < args->suppress_info)
-+ report_info("Retried transaction %lu times without exception",
-+ args->max_retries);
-+ break;
-+ default:
-+ report_fail("Invalid return transaction result");
-+ goto out;
-+ }
-+
-+ if (failures < args->suppress_info)
-+ report_info("transaction abort code: %llu", diag.tdb.abort_code);
-+ if (args->diagnose && failures < args->suppress_info) {
++ register_pgm_cleanup_func(trigger->fixup);
++ trans_result = retry_transaction(trigger, args->max_retries, &diag.tdb, expected_pgm);
++ register_pgm_cleanup_func(NULL);
++ switch (trans_result) {
++ case 0:
++ report_pass("Program interrupt: expected(%d) == received(%d)",
++ expected_pgm, expected_pgm);
++ break;
++ case _HTM_TBEGIN_INDETERMINATE:
++ case _HTM_TBEGIN_PERSISTENT:
++ report_info("transaction failed with cc %d", trans_result);
++ report_info("transaction abort code: %llu", diag.tdb.abort_code);
++ if (args->diagnose)
+ for (i = 0; i < 32; i++)
-+ report_info("diag+%03d: %016lx", i*8, diag.dwords[i]);
-+ }
-+ ++failures;
-+ }
-+ if (failures <= args->max_failures) {
-+ report_pass(
-+ "Program interrupt: always expected(%d) == received(%d), transaction failures: %u",
-+ expected_pgm,
-+ expected_pgm,
-+ failures);
-+ } else {
-+ report_fail("Too many transaction failures: %u", failures);
++ report_info("diag+%03d: %016lx", i * 8, diag.dwords[i]);
++ break;
++ case _HTM_TBEGIN_TRANSIENT:
++ report_fail("Program interrupt: expected(%d) == received(%d)",
++ expected_pgm, clear_pgm_int());
++ break;
++ case TRANSACTION_COMPLETED:
++ report_fail("Transaction completed without exception");
++ break;
++ case TRANSACTION_MAX_RETRIES:
++ report_info("Retried transaction %lu times without exception",
++ args->max_retries);
++ break;
++ default:
++ report_fail("Invalid return transaction result");
++ break;
+ }
-+ if (failures > args->suppress_info)
-+ report_info("Suppressed some transaction failure information messages");
+
-+out:
+ ctl_clear_bit(0, CTL0_TRANSACT_EX_CTL);
+}
+
- static struct args parse_args(int argc, char **argv)
- {
- struct args args = {
- .iterations = 1,
++static struct args parse_args(int argc, char **argv)
++{
++ struct args args = {
+ .max_retries = 20,
-+ .suppress_info = 20,
+ .diagnose = false
- };
- unsigned int i;
- long arg;
-- bool no_arg;
-+ bool no_arg, max_failures = false;
- char *end;
-
- for (i = 1; i < argc; i++) {
-@@ s390x/spec_ex.c: static struct args parse_args(int argc, char **argv)
- report_abort("--iterations needs a positive parameter");
- args.iterations = arg;
- ++i;
-+ } else if (!strcmp("--max-retries", argv[i])) {
-+ if (no_arg)
-+ report_abort("--max-retries needs a positive parameter");
-+ args.max_retries = arg;
-+ ++i;
-+ } else if (!strcmp("--suppress-info", argv[i])) {
-+ if (no_arg)
-+ report_abort("--suppress-info needs a positive parameter");
-+ args.suppress_info = arg;
-+ ++i;
-+ } else if (!strcmp("--max-failures", argv[i])) {
++ };
++ unsigned int i;
++ long arg;
++ bool no_arg;
++ char *end;
++ const char *flag;
++ uint64_t *argp;
++
++ for (i = 1; i < argc; i++) {
++ no_arg = true;
++ if (i < argc - 1) {
++ no_arg = *argv[i + 1] == '\0';
++ arg = strtol(argv[i + 1], &end, 10);
++ no_arg |= *end != '\0';
++ no_arg |= arg < 0;
++ }
++
++ flag = "--max-retries";
++ argp = &args.max_retries;
++ if (!strcmp(flag, argv[i])) {
+ if (no_arg)
-+ report_abort("--max-failures needs a positive parameter");
-+ args.max_failures = arg;
-+ max_failures = true;
++ report_abort("%s needs a positive parameter", flag);
++ *argp = arg;
+ ++i;
-+ } else if (!strcmp("--diagnose", argv[i])) {
++ continue;
++ }
++ if (!strcmp("--diagnose", argv[i])) {
+ args.diagnose = true;
-+ } else if (!strcmp("--no-diagnose", argv[i])) {
++ continue;
++ }
++ if (!strcmp("--no-diagnose", argv[i])) {
+ args.diagnose = false;
- } else {
- report_abort("Unsupported parameter '%s'",
- argv[i]);
- }
- }
++ continue;
++ }
++ report_abort("Unsupported parameter '%s'",
++ argv[i]);
++ }
+
-+ if (!max_failures)
-+ args.max_failures = args.iterations / 1000;
++ return args;
++}
+
- return args;
- }
+ int main(int argc, char **argv)
+ {
+ unsigned int i;
++ struct args args = parse_args(argc, argv);
++
+ report_prefix_push("specification exception");
+ for (i = 0; spec_ex_triggers[i].name; i++) {
+ report_prefix_push(spec_ex_triggers[i].name);
@@ s390x/spec_ex.c: int main(int argc, char **argv)
}
report_prefix_pop();base-commit: ca785dae0dd343b1de4b3f5d6c1223d41fbc39e7
Signature · 1 line
2.33.1
PATCH v4 1/2 s390x: Add specification exception test
Generate specification exceptions and check that they occur.
--- s390x/Makefile | 1 + s390x/spec_ex.c | 154 ++++++++++++++++++++++++++++++++++++++++++++ s390x/unittests.cfg | 3 + 3 files changed, 158 insertions(+) create mode 100644 s390x/spec_ex.c
s390x/Makefile +1 -0
@@ -25,6 +25,7 @@ tests += $(TEST_DIR)/uv-host.elf tests += $(TEST_DIR)/edat.elf tests += $(TEST_DIR)/mvpg-sie.elf tests += $(TEST_DIR)/spec_ex-sie.elf +tests += $(TEST_DIR)/spec_ex.elf tests += $(TEST_DIR)/firq.elf tests_binary = $(patsubst %.elf,%.bin,$(tests))
s390x/spec_ex.c new file +154 -0
154 lines not on this page · raw message
s390x/unittests.cfg +3 -0
@@ -113,6 +113,9 @@ file = mvpg-sie.elf [spec_ex-sie] file = spec_ex-sie.elf +[spec_ex] +file = spec_ex.elf + [firq-linear-cpu-ids] file = firq.elf timeout = 20
Signature · 1 line
2.33.1
Re: [kvm-unit-tests PATCH v4 1/2] s390x: Add specification exception test
Quoted 53 lines · On Tue, 11 Jan 2022 17:39:00 +0100 Janis Schoetterl-Glausch…
Generate specification exceptions and check that they occur.
Signed-off-by Janis Schoetterl-Glausch <[email protected]>--- s390x/Makefile | 1 + s390x/spec_ex.c | 154 ++++++++++++++++++++++++++++++++++++++++++++ s390x/unittests.cfg | 3 + 3 files changed, 158 insertions(+) create mode 100644 s390x/spec_ex.cs390x/Makefile +1
-0@@ -25,6 +25,7 @@ tests += $(TEST_DIR)/uv-host.elf tests += $(TEST_DIR)/edat.elf tests += $(TEST_DIR)/mvpg-sie.elf tests += $(TEST_DIR)/spec_ex-sie.elf +tests += $(TEST_DIR)/spec_ex.elf tests += $(TEST_DIR)/firq.elf tests_binary = $(patsubst %.elf,%.bin,$(tests))s390x/spec_ex.c new file +25
-0@@ -0,0 +1,154 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* +* Copyright IBM Corp. 2021 +* +* Specification exception test. +* Tests that specification exceptions occur when expected. +* +* Can be extended by adding triggers to spec_ex_triggers, see comments below. +*/ +#include <stdlib.h> +#include <libcflat.h> +#include <asm/interrupt.h> + +static struct lowcore *lc = (struct lowcore *)0 ; + +static bool invalid_psw_expected; +static struct psw expected_psw; +static struct psw invalid_psw; +static struct psw fixup_psw; + +/* The standard program exception handler cannot deal with invalid old PSWs, +* especially not invalid instruction addresses, as in that case one cannot +* find the instruction following the faulting one from the old PSW. +* The PSW to return to is set by load_psw. +*/
s390x/spec_ex.c line 35
Quoted 10 lines
s390x/spec_ex.c new file +10
-0+static void fixup_invalid_psw (void ) +{ +// signal occurrence of invalid psw fixup + invalid_psw_expected = false; + invalid_psw = lc->pgm_old_psw; + lc->pgm_old_psw = fixup_psw; +} + +/* Load possibly invalid psw, but setup fixup_psw before, +* so that *fixup_invalid_psw() can bring us back onto the right track.
is the * just a typo?
Quoted 17 lines
s390x/spec_ex.c new file +17
-0+* Also acts as compiler barrier, -> none required in expect/check_invalid_psw +*/ +static void load_psw (struct psw psw) +{ +uint64_t scratch; + + fixup_psw.mask =extract_psw_mask (); + asmvolatile ("larl %[scratch],nop%=\n" +" stg %[scratch],%[addr]\n" +" lpswe %[psw]\n" +"nop%=: nop\n" + : [scratch]"=&r" (scratch), + [addr]"=&T" (fixup_psw.addr) + : [psw]"Q" (psw) + :"cc" ,"memory" + ); +}
s390x/spec_ex.c line 62
Quoted 10 lines
s390x/spec_ex.c new file +10
-0+ +static void expect_invalid_psw (struct psw psw) +{ + expected_psw = psw; + invalid_psw_expected = true; +} + +static int check_invalid_psw (void ) +{ +// toggled to signal occurrence of invalid psw fixup
please use /* */ style of comments also for single line comments
Quoted 63 lines
s390x/spec_ex.c new file +63
-0+if (!invalid_psw_expected) { +if (expected_psw.mask == invalid_psw.mask && + expected_psw.addr == invalid_psw.addr) +return 0 ; +report_fail ("Wrong invalid PSW" ); + }else { +report_fail ("Expected exception due to invalid PSW" ); + } +return 1 ; +} + +static int psw_bit_12_is_1 (void ) +{ +struct psw invalid = { .mask =0x0008000000000000 , .addr =0x00000000deadbeee }; + +expect_invalid_psw (invalid); +load_psw (expected_psw); +return check_invalid_psw (); +} + +static int bad_alignment (void ) +{ + uint32_t words[5] __attribute__((aligned(16))); +uint32_t (*bad_aligned)[4 ] = (uint32_t (*)[4 ])&words[1 ]; + + asmvolatile ("lpq %%r6,%[bad]" + : : [bad]"T" (*bad_aligned) + :"%r6" ,"%r7" + ); +return 0 ; +} + +static int not_even (void ) +{ + uint64_t quad[2] __attribute__((aligned(16))) = {0}; + + asmvolatile (".insn rxy,0xe3000000008f,%%r7,%[quad]" //lpq %%r7,%[quad] + : : [quad]"T" (quad) + :"%r7" ,"%r8" + ); +return 0 ; +} + +/* +* Harness for specification exception testing. +* func only triggers exception, reporting is taken care of automatically. +*/ +struct spec_ex_trigger { +const char *name; +int (*func)(void ); +void (*fixup)(void ); +}; + +/* List of all tests to execute */ +static const struct spec_ex_trigger spec_ex_triggers[] = { + {"psw_bit_12_is_1" , &psw_bit_12_is_1, &fixup_invalid_psw }, + {"bad_alignment" , &bad_alignment,NULL }, + {"not_even" , ¬_even,NULL }, + {NULL ,NULL ,NULL }, +}; + +static void test_spec_ex (const struct spec_ex_trigger *trigger) +{
s390x/spec_ex.c line 135
Quoted 10 lines
s390x/spec_ex.c new file +10
-0+uint16_t expected_pgm =PGM_INT_CODE_SPECIFICATION ; +uint16_t pgm; +int rc; + +expect_pgm_int (); +register_pgm_cleanup_func (trigger->fixup); + rc = trigger->func (); +register_pgm_cleanup_func (NULL ); +if (rc) +return ;
why do you exit early in case of failure? (moreover, your are not even reporting the failure)
Quoted 33 lines
s390x/spec_ex.c new file +19
-0+ pgm =clear_pgm_int (); +report (pgm == expected_pgm,"Program interrupt: expected(%d) == received(%d)" , + expected_pgm, pgm); +} + +int main (int argc,char **argv) +{ +unsigned int i; + +report_prefix_push ("specification exception" ); +for (i =0 ; spec_ex_triggers[i].name; i++) { +report_prefix_push (spec_ex_triggers[i].name); +test_spec_ex (&spec_ex_triggers[i]); +report_prefix_pop (); + } +report_prefix_pop (); + +return report_summary (); +}s390x/unittests.cfg +3
-0@@ -113,6 +113,9 @@ file = mvpg-sie.elf [spec_ex-sie] file = spec_ex-sie.elf +[spec_ex] +file = spec_ex.elf + [firq-linear-cpu-ids] file = firq.elf timeout = 20
Re: [kvm-unit-tests PATCH v4 1/2] s390x: Add specification exception test
Quoted 60 lines · Claudio Imbrenda
Quoted 57 lines · On Tue, 11 Jan 2022 17:39:00 +0100 Janis Schoetterl-Glausch…
Generate specification exceptions and check that they occur.
Signed-off-by Janis Schoetterl-Glausch <[email protected]>--- s390x/Makefile | 1 + s390x/spec_ex.c | 154 ++++++++++++++++++++++++++++++++++++++++++++ s390x/unittests.cfg | 3 + 3 files changed, 158 insertions(+) create mode 100644 s390x/spec_ex.cs390x/Makefile +1
-0@@ -25,6 +25,7 @@ tests += $(TEST_DIR)/uv-host.elf tests += $(TEST_DIR)/edat.elf tests += $(TEST_DIR)/mvpg-sie.elf tests += $(TEST_DIR)/spec_ex-sie.elf +tests += $(TEST_DIR)/spec_ex.elf tests += $(TEST_DIR)/firq.elf tests_binary = $(patsubst %.elf,%.bin,$(tests))s390x/spec_ex.c new file +29
-0@@ -0,0 +1,154 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* +* Copyright IBM Corp. 2021 +* +* Specification exception test. +* Tests that specification exceptions occur when expected. +* +* Can be extended by adding triggers to spec_ex_triggers, see comments below. +*/ +#include <stdlib.h> +#include <libcflat.h> +#include <asm/interrupt.h> + +static struct lowcore *lc = (struct lowcore *)0 ; + +static bool invalid_psw_expected; +static struct psw expected_psw; +static struct psw invalid_psw; +static struct psw fixup_psw; + +/* The standard program exception handler cannot deal with invalid old PSWs, +* especially not invalid instruction addresses, as in that case one cannot +* find the instruction following the faulting one from the old PSW. +* The PSW to return to is set by load_psw. +*/ +static void fixup_invalid_psw (void ) +{ +// signal occurrence of invalid psw fixup + invalid_psw_expected = false;
Quoted 8 lines
s390x/spec_ex.c line 35
Quoted 6 lines
s390x/spec_ex.c new file +6
-0+ invalid_psw = lc->pgm_old_psw; + lc->pgm_old_psw = fixup_psw; +} + +/* Load possibly invalid psw, but setup fixup_psw before, +* so that *fixup_invalid_psw() can bring us back onto the right track. is the * just a typo?
Must be :)
[...]
Quoted 7 lines
Quoted 7 lines
s390x/spec_ex.c new file +7
-0+static void test_spec_ex (const struct spec_ex_trigger *trigger) +{ +uint16_t expected_pgm =PGM_INT_CODE_SPECIFICATION ; +uint16_t pgm; +int rc; + +expect_pgm_int ();
Quoted 8 lines
s390x/spec_ex.c line 135
Quoted 5 lines
s390x/spec_ex.c new file +5
-0+register_pgm_cleanup_func (trigger->fixup); + rc = trigger->func (); +register_pgm_cleanup_func (NULL ); +if (rc) +return ;why do you exit early in case of failure? (moreover, your are not even reporting the failure)
In that case it's the triggers responsibility to report. That is, we're testing for additional conditions specific to the trigger and one of those failed. Might not make sense to check if the expected interrupt occurred, so we don't. Basically it's because check_invalid_psw might fail in psw_bit_12_is_1.
Quoted 35 lines
Quoted 34 lines
s390x/spec_ex.c new file +19
-0+ pgm =clear_pgm_int (); +report (pgm == expected_pgm,"Program interrupt: expected(%d) == received(%d)" , + expected_pgm, pgm); +} + +int main (int argc,char **argv) +{ +unsigned int i; + +report_prefix_push ("specification exception" ); +for (i =0 ; spec_ex_triggers[i].name; i++) { +report_prefix_push (spec_ex_triggers[i].name); +test_spec_ex (&spec_ex_triggers[i]); +report_prefix_pop (); + } +report_prefix_pop (); + +return report_summary (); +}s390x/unittests.cfg +3
-0@@ -113,6 +113,9 @@ file = mvpg-sie.elf [spec_ex-sie] file = spec_ex-sie.elf +[spec_ex] +file = spec_ex.elf + [firq-linear-cpu-ids] file = firq.elf timeout = 20
PATCH v4 2/2 s390x: Test specification exceptions during transaction
In reply to Janis Schoetterl-GlauschProgram interruptions during transactional execution cause other interruption codes.
Check that we see the expected code for (some) specification exceptions.
---
I don't think we can use constraint transactions to guarantee successful execution of the transaction unless we implement it completely in asm, otherwise we cannot ensure that the constraints of the transaction are met.
lib/s390x/asm/arch_def.h | 1 + s390x/spec_ex.c | 177 ++++++++++++++++++++++++++++++++++++++- 2 files changed, 174 insertions(+), 4 deletions(-)
lib/s390x/asm/arch_def.h +1 -0
@@ -55,6 +55,7 @@ struct psw {#define PSW_MASK_BA 0x0000000080000000UL#define PSW_MASK_64 (PSW_MASK_BA | PSW_MASK_EA) +#define CTL0_TRANSACT_EX_CTL (63 - 8)#define CTL0_LOW_ADDR_PROT (63 - 35)#define CTL0_EDAT (63 - 40)#define CTL0_IEP (63 - 43)
s390x/spec_ex.c +173 -4
219 lines not on this page · raw message
Signature · 1 line
2.33.1
Re: [kvm-unit-tests PATCH v4 2/2] s390x: Test specification exceptions during transaction
Quoted 32 lines · On Tue, 11 Jan 2022 17:39:01 +0100 Janis Schoetterl-Glausch…
Program interruptions during transactional execution cause other interruption codes.
Check that we see the expected code for (some) specification exceptions.Signed-off-by Janis Schoetterl-Glausch <[email protected]>---
I don't think we can use constraint transactions to guarantee successful execution of the transaction unless we implement it completely in asm, otherwise we cannot ensure that the constraints of the transaction are met.lib/s390x/asm/arch_def.h | 1 + s390x/spec_ex.c | 177 ++++++++++++++++++++++++++++++++++++++- 2 files changed, 174 insertions(+), 4 deletions(-)lib/s390x/asm/arch_def.h +1
-0@@ -55,6 +55,7 @@ struct psw {#define PSW_MASK_BA 0x0000000080000000UL#define PSW_MASK_64 (PSW_MASK_BA | PSW_MASK_EA) +#define CTL0_TRANSACT_EX_CTL (63 - 8)#define CTL0_LOW_ADDR_PROT (63 - 35)#define CTL0_EDAT (63 - 40)#define CTL0_IEP (63 - 43)s390x/spec_ex.c +0
-0@@ -4,12 +4,18 @@*
s390x/spec_ex.c line 14
Quoted 10 lines
s390x/spec_ex.c +4
-0* Specification exception test. * Tests that specification exceptions occur when expected. +* This includes specification exceptions occurring during transactional execution +* as these result in another interruption code (the transactional-execution-aborted +* bit is set). * * Can be extended by adding triggers to spec_ex_triggers, see comments below. */ #include <stdlib.h> +#include <htmintrin.h>
where is this header ?
Quoted 39 lines
s390x/spec_ex.c +10
-4#include <libcflat.h> +#include <asm/barrier.h> #include <asm/interrupt.h> +#include <asm/facility.h> static struct lowcore *lc = (struct lowcore *)0 ;@@ -106,19 +112,21 @@ static int not_even(void)/* * Harness for specification exception testing. * func only triggers exception, reporting is taken care of automatically. +* If a trigger is transactable it will also be executed during a transaction. */ struct spec_ex_trigger {const char *name;int (*func)(void ); +bool transactable;void (*fixup)(void ); };/* List of all tests to execute */ static const struct spec_ex_trigger spec_ex_triggers[] = { - {"psw_bit_12_is_1" , &psw_bit_12_is_1, &fixup_invalid_psw }, - {"bad_alignment" , &bad_alignment,NULL }, - {"not_even" , ¬_even,NULL }, - {NULL ,NULL ,NULL }, + {"psw_bit_12_is_1" , &psw_bit_12_is_1, false, &fixup_invalid_psw }, + {"bad_alignment" , &bad_alignment, true,NULL }, + {"not_even" , ¬_even, true,NULL }, + {NULL ,NULL , false,NULL }, };static void test_spec_ex (const struct spec_ex_trigger *trigger)@@ -138,10 +146,161 @@ static void test_spec_ex(const struct spec_ex_trigger *trigger) expected_pgm, pgm); } +#define TRANSACTION_COMPLETED 4 +#define TRANSACTION_MAX_RETRIES 5
s390x/spec_ex.c static void test_spec_ex(const struct spec_ex_trigger *trigger) · line 160
Quoted 10 lines
s390x/spec_ex.c +10
-0+ +/* NULL must be passed to __builtin_tbegin via constant, forbid diagnose from +* being NULL to keep things simple +*/ +static int __attribute__((nonnull)) +with_transaction (int (*trigger)(void ),struct __htm_tdb *diagnose) +{ +int cc; + + cc =__builtin_tbegin (diagnose);
this is __really__ hard to understand if you don't know exactly how transactions work. I would like to see some comments explaining what's going on and why
s390x/spec_ex.c static void test_spec_ex(const struct spec_ex_trigger *trigger) · line 162
Quoted 2 lines
s390x/spec_ex.c +2
-0+if (cc == _HTM_TBEGIN_STARTED) { +/* return code is meaningless: transaction needs to complete
please, in a multi-line comment, leave the first line empty, like this:
/*
* first line
* another line
* last line
*/
Quoted 13 lines
s390x/spec_ex.c +13
-0+* in order to return and completion indicates a test failure +*/ +trigger (); +__builtin_tend (); +return TRANSACTION_COMPLETED ; + }else { +return cc; + } +} + +static int retry_transaction (const struct spec_ex_trigger *trigger,unsigned int max_retries, +struct __htm_tdb *tdb,uint16_t expected_pgm) +{
s390x/spec_ex.c static void test_spec_ex(const struct spec_ex_trigger *trigger) · line 185
Quoted 10 lines
s390x/spec_ex.c +10
-0+int trans_result, i; +uint16_t pgm; + +for (i =0 ; i < max_retries; i++) { +expect_pgm_int (); + trans_result =with_transaction (trigger->func, tdb); +if (trans_result == _HTM_TBEGIN_TRANSIENT) { +mb (); + pgm = lc->pgm_int_code; +if (pgm ==0 )
add a comment to explain why we try again with pgm == 0 .
Quoted 46 lines
s390x/spec_ex.c +46
-0+continue ; + else if (pgm == expected_pgm) + return 0; + } +return trans_result; + } +return TRANSACTION_MAX_RETRIES ; +} + +struct args { +uint64_t max_retries; +bool diagnose; +}; + +static void test_spec_ex_trans (struct args *args,const struct spec_ex_trigger *trigger) +{ +const uint16_t expected_pgm =PGM_INT_CODE_SPECIFICATION + |PGM_INT_CODE_TX_ABORTED_EVENT ; +union { +struct __htm_tdb tdb; +uint64_t dwords[sizeof (struct __htm_tdb ) /sizeof (uint64_t )]; + } diag; +unsigned int i; +int trans_result; + +if (!test_facility (73 )) { +report_skip ("transactional-execution facility not installed" ); +return ; + } +ctl_set_bit (0 ,CTL0_TRANSACT_EX_CTL );/* enable transactional-exec */ + +register_pgm_cleanup_func (trigger->fixup); + trans_result =retry_transaction (trigger, args->max_retries, &diag.tdb, expected_pgm); +register_pgm_cleanup_func (NULL ); +switch (trans_result) { +case 0 : +report_pass ("Program interrupt: expected(%d) == received(%d)" , + expected_pgm, expected_pgm); +break ; +case _HTM_TBEGIN_INDETERMINATE: +case _HTM_TBEGIN_PERSISTENT: +report_info ("transaction failed with cc %d" , trans_result); +report_info ("transaction abort code: %llu" , diag.tdb.abort_code); +if (args->diagnose) +for (i =0 ; i <32 ; i++) +report_info ("diag+%03d: %016lx" , i *8 , diag.dwords[i]);
s390x/spec_ex.c static void test_spec_ex(const struct spec_ex_trigger *trigger) · line 241
Quoted 10 lines
s390x/spec_ex.c +10
-0+break ; +case _HTM_TBEGIN_TRANSIENT: +report_fail ("Program interrupt: expected(%d) == received(%d)" , + expected_pgm,clear_pgm_int ()); +break ; +case TRANSACTION_COMPLETED : +report_fail ("Transaction completed without exception" ); +break ; +case TRANSACTION_MAX_RETRIES : + report_info("Retried transaction %lu times without exception",
I would word it differently, otherwise the difference between this case and the one above is not clear. Maybe something like
"Transaction retried %lu times with transient failures, giving up"
Moreover, in this case the test is in practice skipped, I think you should use report_skip
s390x/spec_ex.c static void test_spec_ex(const struct spec_ex_trigger *trigger) · line 253
Quoted 12 lines
s390x/spec_ex.c +12
-0+ args->max_retries); +break ; +default : +report_fail ("Invalid return transaction result" ); +break ; + } + +ctl_clear_bit (0 ,CTL0_TRANSACT_EX_CTL ); +} + +static struct args parse_args (int argc,char **argv) +{
can you find a way to simplify this function, or at least to make it more readable?
Quoted 69 lines
s390x/spec_ex.c +56
-0+struct args args = { + .max_retries =20 , + .diagnose = false + }; +unsigned int i; +long arg; +bool no_arg; +char *end; +const char *flag; +uint64_t *argp; + +for (i =1 ; i < argc; i++) { + no_arg = true; +if (i < argc -1 ) { + no_arg = *argv[i +1 ] =='\0' ; + arg =strtol (argv[i +1 ], &end,10 ); + no_arg |= *end !='\0' ; + no_arg |= arg <0 ; + } + + flag ="--max-retries" ; + argp = &args.max_retries; +if (!strcmp (flag, argv[i])) { +if (no_arg) +report_abort ("%s needs a positive parameter" , flag); + *argp = arg; + ++i; +continue ; + } +if (!strcmp ("--diagnose" , argv[i])) { + args.diagnose = true; +continue ; + } +if (!strcmp ("--no-diagnose" , argv[i])) { + args.diagnose = false; +continue ; + } +report_abort ("Unsupported parameter '%s'" , + argv[i]); + } + +return args; +} +int main (int argc,char **argv) {unsigned int i; +struct args args =parse_args (argc, argv); +report_prefix_push ("specification exception" );for (i =0 ; spec_ex_triggers[i].name; i++) {report_prefix_push (spec_ex_triggers[i].name);@@ -150,5 +309,15 @@ int main(int argc, char **argv) }report_prefix_pop (); +report_prefix_push ("specification exception during transaction" ); +for (i =0 ; spec_ex_triggers[i].name; i++) { +if (spec_ex_triggers[i].transactable) { +report_prefix_push (spec_ex_triggers[i].name); +test_spec_ex_trans (&args, &spec_ex_triggers[i]); +report_prefix_pop (); + } + } +report_prefix_pop (); +return report_summary (); }
Re: [kvm-unit-tests PATCH v4 2/2] s390x: Test specification exceptions during transaction
Quoted 39 lines · Claudio Imbrenda
Quoted 36 lines · On Tue, 11 Jan 2022 17:39:01 +0100 Janis Schoetterl-Glausch…
Program interruptions during transactional execution cause other interruption codes.
Check that we see the expected code for (some) specification exceptions.Signed-off-by Janis Schoetterl-Glausch <[email protected]>---
I don't think we can use constraint transactions to guarantee successful execution of the transaction unless we implement it completely in asm, otherwise we cannot ensure that the constraints of the transaction are met.lib/s390x/asm/arch_def.h | 1 + s390x/spec_ex.c | 177 ++++++++++++++++++++++++++++++++++++++- 2 files changed, 174 insertions(+), 4 deletions(-)lib/s390x/asm/arch_def.h +1
-0@@ -55,6 +55,7 @@ struct psw {#define PSW_MASK_BA 0x0000000080000000UL#define PSW_MASK_64 (PSW_MASK_BA | PSW_MASK_EA) +#define CTL0_TRANSACT_EX_CTL (63 - 8)#define CTL0_LOW_ADDR_PROT (63 - 35)#define CTL0_EDAT (63 - 40)#define CTL0_IEP (63 - 43)s390x/spec_ex.c +2
-0@@ -4,12 +4,18 @@* * Specification exception test. * Tests that specification exceptions occur when expected. +* This includes specification exceptions occurring during transactional execution +* as these result in another interruption code (the transactional-execution-aborted
Quoted 8 lines
s390x/spec_ex.c line 14
Quoted 6 lines
s390x/spec_ex.c +2
-0+* bit is set). * * Can be extended by adding triggers to spec_ex_triggers, see comments below. */ #include <stdlib.h> +#include <htmintrin.h> where is this header ?
Not sure what you're asking exactly. The path is /usr/lib/gcc/s390x-redhat-linux/11/include/htmintrin.h on my machine.
Quoted 38 lines
Quoted 38 lines
s390x/spec_ex.c +8
-4#include <libcflat.h> +#include <asm/barrier.h> #include <asm/interrupt.h> +#include <asm/facility.h> static struct lowcore *lc = (struct lowcore *)0 ;@@ -106,19 +112,21 @@ static int not_even(void)/* * Harness for specification exception testing. * func only triggers exception, reporting is taken care of automatically. +* If a trigger is transactable it will also be executed during a transaction. */ struct spec_ex_trigger {const char *name;int (*func)(void ); +bool transactable;void (*fixup)(void ); };/* List of all tests to execute */ static const struct spec_ex_trigger spec_ex_triggers[] = { - {"psw_bit_12_is_1" , &psw_bit_12_is_1, &fixup_invalid_psw }, - {"bad_alignment" , &bad_alignment,NULL }, - {"not_even" , ¬_even,NULL }, - {NULL ,NULL ,NULL }, + {"psw_bit_12_is_1" , &psw_bit_12_is_1, false, &fixup_invalid_psw }, + {"bad_alignment" , &bad_alignment, true,NULL }, + {"not_even" , ¬_even, true,NULL }, + {NULL ,NULL , false,NULL }, };static void test_spec_ex (const struct spec_ex_trigger *trigger)@@ -138,10 +146,161 @@ static void test_spec_ex(const struct spec_ex_trigger *trigger) expected_pgm, pgm); }
Quoted 16 lines
s390x/spec_ex.c static void test_spec_ex(const struct spec_ex_trigger *trigger) · line 160
Quoted 12 lines
s390x/spec_ex.c +12
-0+#define TRANSACTION_COMPLETED 4 +#define TRANSACTION_MAX_RETRIES 5 + +/* NULL must be passed to __builtin_tbegin via constant, forbid diagnose from +* being NULL to keep things simple +*/ +static int __attribute__((nonnull)) +with_transaction (int (*trigger)(void ),struct __htm_tdb *diagnose) +{ +int cc; + + cc =__builtin_tbegin (diagnose);this is
__really__hard to understand if you don't know exactly how transactions work. I would like to see some comments explaining what's going on and why
True.
[...]
Quoted 46 lines
Quoted 32 lines
s390x/spec_ex.c +32
-0+static void test_spec_ex_trans (struct args *args,const struct spec_ex_trigger *trigger) +{ +const uint16_t expected_pgm =PGM_INT_CODE_SPECIFICATION + |PGM_INT_CODE_TX_ABORTED_EVENT ; +union { +struct __htm_tdb tdb; +uint64_t dwords[sizeof (struct __htm_tdb ) /sizeof (uint64_t )]; + } diag; +unsigned int i; +int trans_result; + +if (!test_facility (73 )) { +report_skip ("transactional-execution facility not installed" ); +return ; + } +ctl_set_bit (0 ,CTL0_TRANSACT_EX_CTL );/* enable transactional-exec */ + +register_pgm_cleanup_func (trigger->fixup); + trans_result =retry_transaction (trigger, args->max_retries, &diag.tdb, expected_pgm); +register_pgm_cleanup_func (NULL ); +switch (trans_result) { +case 0 : +report_pass ("Program interrupt: expected(%d) == received(%d)" , + expected_pgm, expected_pgm); +break ; +case _HTM_TBEGIN_INDETERMINATE: +case _HTM_TBEGIN_PERSISTENT: +report_info ("transaction failed with cc %d" , trans_result); +report_info ("transaction abort code: %llu" , diag.tdb.abort_code); +if (args->diagnose) +for (i =0 ; i <32 ; i++) +report_info ("diag+%03d: %016lx" , i *8 , diag.dwords[i]);s390x/spec_ex.c static void test_spec_ex(const struct spec_ex_trigger *trigger) · line 241
Quoted 10 lines
s390x/spec_ex.c +10
-0+break ; +case _HTM_TBEGIN_TRANSIENT: +report_fail ("Program interrupt: expected(%d) == received(%d)" , + expected_pgm,clear_pgm_int ()); +break ; +case TRANSACTION_COMPLETED : +report_fail ("Transaction completed without exception" ); +break ; +case TRANSACTION_MAX_RETRIES : + report_info("Retried transaction %lu times without exception",I would word it differently, otherwise the difference between this case and the one above is not clear. Maybe something like
Quoted 4 lines
"Transaction retried %lu times with transient failures, giving up"
Moreover, in this case the test is in practice skipped, I think you should use
report_skip
Yes to both.
[...]
Quoted 17 lines
s390x/spec_ex.c static void test_spec_ex(const struct spec_ex_trigger *trigger) · line 253
Quoted 2 lines
s390x/spec_ex.c +2
-0+static struct args parse_args (int argc,char **argv) +{can you find a way to simplify this function, or at least to make it more readable?
Quoted 11 lines
s390x/spec_ex.c +11
-0+struct args args = { + .max_retries =20 , + .diagnose = false + }; +unsigned int i; +long arg; +bool no_arg; +char *end; +const char *flag; +uint64_t *argp; +
Quoted 8 lines
s390x/spec_ex.c static void test_spec_ex(const struct spec_ex_trigger *trigger) · line 272
Quoted 8 lines
s390x/spec_ex.c +8
-0+for (i =1 ; i < argc; i++) { + no_arg = true; +if (i < argc -1 ) { + no_arg = *argv[i +1 ] =='\0' ; + arg =strtol (argv[i +1 ], &end,10 ); + no_arg |= *end !='\0' ; + no_arg |= arg <0 ; + }
I'll try to make that ^ more readable, the stuff below seems fine to me.
Quoted 25 lines
Quoted 25 lines
s390x/spec_ex.c +25
-0+ + flag ="--max-retries" ; + argp = &args.max_retries; +if (!strcmp (flag, argv[i])) { +if (no_arg) +report_abort ("%s needs a positive parameter" , flag); + *argp = arg; + ++i; +continue ; + } +if (!strcmp ("--diagnose" , argv[i])) { + args.diagnose = true; +continue ; + } +if (!strcmp ("--no-diagnose" , argv[i])) { + args.diagnose = false; +continue ; + } +report_abort ("Unsupported parameter '%s'" , + argv[i]); + } + +return args; +} +
[...]