igb/igc: fix XDP registration
Subsystems (3)
v3 cover igb/igc: fix XDP registration
Fix the kernel warning "Missing unregister, handled but fix driver" when running, e.g.,
$ ethtool -G eth0 rx 1024
on igc. Remove memset hack from igb and align igb code to igc.
v3: use dev_err rather than netdev_err, just as in error case.
Corinna Vinschen (2):
igc: avoid kernel warning when changing RX ring parameters
igb: refactor XDP registration
drivers/net/ethernet/intel/igb/igb_ethtool.c | 4 ---- drivers/net/ethernet/intel/igb/igb_main.c | 14 ++++++++++---- drivers/net/ethernet/intel/igc/igc_main.c | 20 +++++++++++--------- 3 files changed, 22 insertions(+), 17 deletions(-)
Signature · 1 line
2.27.0
PATCH v3 1/2 igc: avoid kernel warning when changing RX ring parameters
Calling ethtool changing the RX ring parameters like this:
$ ethtool -G eth0 rx 1024
on igc triggers the "Missing unregister, handled but fix driver" warning in xdp_rxq_info_reg().
igc_ethtool_set_ringparam() copies the igc_ring structure but neglects to reset the xdp_rxq_info member before calling igc_setup_rx_resources(). This in turn calls xdp_rxq_info_reg() with an already registered xdp_rxq_info.
Make sure to unregister the xdp_rxq_info structure first in igc_setup_rx_resources. Move xdp_rxq_info handling down to bethe last action, thus allowing to remove the xdp_rxq_info_unreg call in the error path.
--- drivers/net/ethernet/intel/igc/igc_main.c | 20 +++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-)
drivers/net/ethernet/intel/igc/igc_main.c +11 -9
@@ -505,14 +505,6 @@ int igc_setup_rx_resources(struct igc_ring *rx_ring)u8 index = rx_ring->queue_index;int size, desc_len, res; - res =xdp_rxq_info_reg (&rx_ring->xdp_rxq, ndev, index, - rx_ring->q_vector->napi.napi_id); -if (res <0 ) { -netdev_err (ndev,"Failed to register xdp_rxq index %u\n" , - index); -return res; - } - size =sizeof (struct igc_rx_buffer ) * rx_ring->count; rx_ring->rx_buffer_info =vzalloc (size);if (!rx_ring->rx_buffer_info)
@@ -534,10 +526,20 @@ int igc_setup_rx_resources(struct igc_ring *rx_ring) rx_ring->next_to_clean =0 ; rx_ring->next_to_use =0 ; +/* XDP RX-queue info */ +if (xdp_rxq_info_is_reg (&rx_ring->xdp_rxq)) +xdp_rxq_info_unreg (&rx_ring->xdp_rxq); + res =xdp_rxq_info_reg (&rx_ring->xdp_rxq, ndev, index, + rx_ring->q_vector->napi.napi_id); +if (res <0 ) { +netdev_err (ndev,"Failed to register xdp_rxq index %u\n" , + index); +return res; + } +return 0 ; err: -xdp_rxq_info_unreg (&rx_ring->xdp_rxq);vfree (rx_ring->rx_buffer_info); rx_ring->rx_buffer_info =NULL ;netdev_err (ndev,"Unable to allocate memory for Rx descriptor ring\n" );
Signature · 1 line
2.27.0
Re: [PATCH 1/2 net-next v3] igc: avoid kernel warning when changing RX ring parameters
Quoted 43 lines · Corinna Vinschen
Calling ethtool changing the RX ring parameters like this:
$ ethtool -G eth0 rx 1024on igc triggers the "Missing unregister, handled but fix driver" warning in
xdp_rxq_info_reg().
igc_ethtool_set_ringparam()copies theigc_ringstructure but neglects to reset thexdp_rxq_infomember before callingigc_setup_rx_resources(). This in turn callsxdp_rxq_info_reg()with an already registeredxdp_rxq_info.Make sure to unregister the
xdp_rxq_infostructure first inigc_setup_rx_resources. Movexdp_rxq_infohandling down to bethe last action, thus allowing to remove thexdp_rxq_info_unregcall in the error path.Fixes 73f1071c1d29 ("igc: Add support for XDP_TX action")Signed-off-by Corinna Vinschen <[email protected]>--- drivers/net/ethernet/intel/igc/igc_main.c | 20 +++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-)drivers/net/ethernet/intel/igc/igc_main.c +0
-8@@ -505,14 +505,6 @@ int igc_setup_rx_resources(struct igc_ring *rx_ring)u8 index = rx_ring->queue_index;int size, desc_len, res; - res =xdp_rxq_info_reg (&rx_ring->xdp_rxq, ndev, index, - rx_ring->q_vector->napi.napi_id); -if (res <0 ) { -netdev_err (ndev,"Failed to register xdp_rxq index %u\n" , - index); -return res; - } - size =sizeof (struct igc_rx_buffer ) * rx_ring->count; rx_ring->rx_buffer_info =vzalloc (size);if (!rx_ring->rx_buffer_info)@@ -534,10 +526,20 @@ int igc_setup_rx_resources(struct igc_ring *rx_ring) rx_ring->next_to_clean =0 ; rx_ring->next_to_use =0 ;
drivers/net/ethernet/intel/igc/igc_main.c int igc_setup_rx_resources(struct igc_ring *rx_ring) · line 537
Quoted 10 lines
drivers/net/ethernet/intel/igc/igc_main.c +9
-0+/* XDP RX-queue info */ +if (xdp_rxq_info_is_reg (&rx_ring->xdp_rxq)) +xdp_rxq_info_unreg (&rx_ring->xdp_rxq); + res =xdp_rxq_info_reg (&rx_ring->xdp_rxq, ndev, index, + rx_ring->q_vector->napi.napi_id); +if (res <0 ) { +netdev_err (ndev,"Failed to register xdp_rxq index %u\n" , + index); +return res;
Here and in the igb patch, it should be 'goto err', no?
Another suggestion is to add the warning that Lennert reported in the commit message (the comment from Maciej in that other thread).
Apart from that, I think this is cleaner than what I had proposed.
Cheers,
Signature · 1 line
Vinicius
Re: [PATCH 1/2 net-next v3] igc: avoid kernel warning when changing RX ring parameters
Quoted 27 lines · Vinicius Costa Gomes
Quoted 25 lines · Corinna Vinschen
Calling ethtool changing the RX ring parameters like this:
$ ethtool -G eth0 rx 1024on igc triggers the "Missing unregister, handled but fix driver" warning in
xdp_rxq_info_reg().
igc_ethtool_set_ringparam()copies theigc_ringstructure but neglects to reset thexdp_rxq_infomember before callingigc_setup_rx_resources(). This in turn callsxdp_rxq_info_reg()with an already registeredxdp_rxq_info.Make sure to unregister the
xdp_rxq_infostructure first inigc_setup_rx_resources. Movexdp_rxq_infohandling down to bethe last action, thus allowing to remove thexdp_rxq_info_unregcall in the error path.Fixes 73f1071c1d29 ("igc: Add support for XDP_TX action")Signed-off-by Corinna Vinschen <[email protected]>--- drivers/net/ethernet/intel/igc/igc_main.c | 20 +++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-)[...]
drivers/net/ethernet/intel/igc/igc_main.c +0
-0@@ -534,10 +526,20 @@ int igc_setup_rx_resources(struct igc_ring *rx_ring) rx_ring->next_to_clean =0 ; rx_ring->next_to_use =0 ;
Quoted 11 lines
drivers/net/ethernet/intel/igc/igc_main.c int igc_setup_rx_resources(struct igc_ring *rx_ring) · line 537
Quoted 9 lines
drivers/net/ethernet/intel/igc/igc_main.c +9
-0+/* XDP RX-queue info */ +if (xdp_rxq_info_is_reg (&rx_ring->xdp_rxq)) +xdp_rxq_info_unreg (&rx_ring->xdp_rxq); + res =xdp_rxq_info_reg (&rx_ring->xdp_rxq, ndev, index, + rx_ring->q_vector->napi.napi_id); +if (res <0 ) { +netdev_err (ndev,"Failed to register xdp_rxq index %u\n" , + index); +return res;Here and in the igb patch, it should be 'goto err', no?
D'oh, of course. Soory and thanks for catching. I'll prepare a v4.
Quoted 2 lines
Another suggestion is to add the warning that Lennert reported in the commit message (the comment from Maciej in that other thread).
The current commit message already mentiones the "Missing unregister, handled but fix driver" warning. Do you mean the entire warning snippet including call stack? If so, no problem. I'll add it to v4, too.
Shall I also add "Reported-by: Lennert ..."? Funny enough we encountered the problem independently at almost the same time, so when I sent my v1 of the patch I wasn't even aware of the thread started by Lennert and only saw it afterwards :}
Quoted 1 line
Apart from that, I think this is cleaner than what I had proposed.
Thanks,
Corinna
Re: [Intel-wired-lan] [PATCH 1/2 net-next v3] igc: avoid kernel warning when changing RX ring parameters
Quoted 50 lines · Corinna Vinschen
Quoted 27 lines · Vinicius Costa Gomes
Quoted 25 lines · Corinna Vinschen
Calling ethtool changing the RX ring parameters like this:
$ ethtool -G eth0 rx 1024on igc triggers the "Missing unregister, handled but fix driver" warning in
xdp_rxq_info_reg().
igc_ethtool_set_ringparam()copies theigc_ringstructure but neglects to reset thexdp_rxq_infomember before callingigc_setup_rx_resources(). This in turn callsxdp_rxq_info_reg()with an already registeredxdp_rxq_info.Make sure to unregister the
xdp_rxq_infostructure first inigc_setup_rx_resources. Movexdp_rxq_infohandling down to bethe last action, thus allowing to remove thexdp_rxq_info_unregcall in the error path.Fixes 73f1071c1d29 ("igc: Add support for XDP_TX action")Signed-off-by Corinna Vinschen <[email protected]>--- drivers/net/ethernet/intel/igc/igc_main.c | 20 +++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-)[...]
drivers/net/ethernet/intel/igc/igc_main.c +0
-0@@ -534,10 +526,20 @@ int igc_setup_rx_resources(struct igc_ring *rx_ring) rx_ring->next_to_clean =0 ; rx_ring->next_to_use =0 ;Quoted 11 lines
drivers/net/ethernet/intel/igc/igc_main.c int igc_setup_rx_resources(struct igc_ring *rx_ring) · line 537
Quoted 9 lines
drivers/net/ethernet/intel/igc/igc_main.c +9
-0+/* XDP RX-queue info */ +if (xdp_rxq_info_is_reg (&rx_ring->xdp_rxq)) +xdp_rxq_info_unreg (&rx_ring->xdp_rxq); + res =xdp_rxq_info_reg (&rx_ring->xdp_rxq, ndev, index, + rx_ring->q_vector->napi.napi_id); +if (res <0 ) { +netdev_err (ndev,"Failed to register xdp_rxq index %u\n" , + index); +return res;Here and in the igb patch, it should be 'goto err', no?
D'oh, of course. Soory and thanks for catching. I'll prepare a v4.
Quoted 2 lines
Another suggestion is to add the warning that Lennert reported in the commit message (the comment from Maciej in that other thread).
The current commit message already mentiones the "Missing unregister, handled but fix driver" warning. Do you mean the entire warning snippet including call stack? If so, no problem. I'll add it to v4, too.
Quoted 4 lines
Shall I also add "Reported-by: Lennert ..."? Funny enough we encountered the problem independently at almost the same time, so when I sent my v1 of the patch I wasn't even aware of the thread started by Lennert and only saw it afterwards :}
Never mind, I just send a v4 with all of that.
Corinna
PATCH v3 2/2 igb: refactor XDP registration
In reply to Corinna VinschenOn changing the RX ring parameters igb uses a hack to avoid a warning when calling xdp_rxq_info_reg via igb_setup_rx_resources. It just clears the struct xdp_rxq_info content.
Change this to unregister if we're already registered instead. ALign code to the igc code.
--- drivers/net/ethernet/intel/igb/igb_ethtool.c | 4 ---- drivers/net/ethernet/intel/igb/igb_main.c | 14 ++++++++++---- 2 files changed, 10 insertions(+), 8 deletions(-)
drivers/net/ethernet/intel/igb/igb_ethtool.c +0 -4
@@ -965,10 +965,6 @@ static int igb_set_ringparam(struct net_device *netdev,memcpy (&temp_ring[i], adapter->rx_ring[i],sizeof (struct igb_ring )); -/* Clear copied XDP RX-queue info */ -memset (&temp_ring[i].xdp_rxq,0 , -sizeof (temp_ring[i].xdp_rxq)); - temp_ring[i].count = new_rx_count; err =igb_setup_rx_resources (&temp_ring[i]);if (err) {
drivers/net/ethernet/intel/igb/igb_main.c +10 -4
@@ -4352,7 +4352,7 @@ int igb_setup_rx_resources(struct igb_ring *rx_ring) {struct igb_adapter *adapter =netdev_priv (rx_ring->netdev);struct device *dev = rx_ring->dev; -int size; +int size, res; size =sizeof (struct igb_rx_buffer ) * rx_ring->count;
@@ -4376,9 +4376,15 @@ int igb_setup_rx_resources(struct igb_ring *rx_ring) rx_ring->xdp_prog = adapter->xdp_prog;/* XDP RX-queue info */ -if (xdp_rxq_info_reg (&rx_ring->xdp_rxq, rx_ring->netdev, - rx_ring->queue_index,0 ) <0 ) - goto err; +if (xdp_rxq_info_is_reg (&rx_ring->xdp_rxq)) +xdp_rxq_info_unreg (&rx_ring->xdp_rxq); + res =xdp_rxq_info_reg (&rx_ring->xdp_rxq, rx_ring->netdev, + rx_ring->queue_index,0 ); +if (res <0 ) { +dev_err (dev,"Failed to register xdp_rxq index %u\n" , + rx_ring->queue_index); +return res; + }return 0 ;
Signature · 1 line
2.27.0