regulator: MAX20086: add gpio/consumer.h
PATCH 1/1 regulator: MAX20086: add gpio/consumer.h
max20086-regulator.c needs <linux/gpio/consumer.h> for an enum, some macros, and a function prototype. (seen on ARCH=m68k)
Adding this header file fixes multiple build errors:
../drivers/regulator/max20086-regulator.c: In function 'max20086_i2c_probe':../drivers/regulator/max20086-regulator.c:217:26: error: storage size of 'flags' isn't known
217 | enum gpiod_flags flags;../drivers/regulator/max20086-regulator.c:261:27: error: 'GPIOD_OUT_HIGH' undeclared (first use in this function); did you mean 'GPIOF_INIT_HIGH'?
261 | flags = boot_on ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW;
| ^~~~~~~~~~~~~~../drivers/regulator/max20086-regulator.c:261:44: error: 'GPIOD_OUT_LOW' undeclared (first use in this function); did you mean 'GPIOF_INIT_LOW'?
261 | flags = boot_on ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW;../drivers/regulator/max20086-regulator.c:262:27: error: implicit declaration of function 'devm_gpiod_get'; did you mean 'devm_gpio_free'? [-Werror=implicit-function-declaration]
262 | chip->ena_gpiod = devm_gpiod_get(chip->dev, "enable", flags);../drivers/regulator/max20086-regulator.c:217:26: warning: unused variable 'flags' [-Wunused-variable]
217 | enum gpiod_flags flags;
--- drivers/regulator/max20086-regulator.c | 1 + 1 file changed, 1 insertion(+)
drivers/regulator/max20086-regulator.c +1 -0
@@ -7,6 +7,7 @@#include <linux/err.h> #include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <linux/i2c.h> #include <linux/module.h> #include <linux/regmap.h>
Hi Randy,
Thank you for the patch.
Quoted 18 lines · Randy Dunlap
max20086-regulator.cneeds <linux/gpio/consumer.h> for an enum, some macros, and a function prototype. (seen on ARCH=m68k)Adding this header file fixes multiple build errors:
../drivers/regulator/max20086-regulator.c: In function 'max20086_i2c_probe':../drivers/regulator/max20086-regulator.c:217:26: error: storage size of 'flags' isn't known
217 | enumgpiod_flagsflags;../drivers/regulator/max20086-regulator.c:261:27: error: 'GPIOD_OUT_HIGH' undeclared (first use in this function); did you mean 'GPIOF_INIT_HIGH'?261 | flags = boot_on ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW; | ^~~~~~~~~~~~~~
../drivers/regulator/max20086-regulator.c:261:44: error: 'GPIOD_OUT_LOW' undeclared (first use in this function); did you mean 'GPIOF_INIT_LOW'?
261 | flags =boot_on?GPIOD_OUT_HIGH:GPIOD_OUT_LOW;../drivers/regulator/max20086-regulator.c:262:27: error: implicit declaration of function 'devm_gpiod_get'; did you mean 'devm_gpio_free'? [-Werror=implicit-function-declaration]
262 |chip->ena_gpiod=devm_gpiod_get(chip->dev, "enable", flags);../drivers/regulator/max20086-regulator.c:217:26: warning: unused variable 'flags' [-Wunused-variable]
217 | enumgpiod_flagsflags;
Quoted 6 lines
Fixes bfff546aae50 ("regulator: Add MAX20086-MAX20089 driver")Signed-off-by Randy Dunlap <[email protected]>Reported-by kernel test robot <[email protected]>Cc Watson Chow <[email protected]>Cc Mark Brown <[email protected]>Cc Laurent Pinchart <[email protected]>
Quoted 14 lines
--- drivers/regulator/max20086-regulator.c | 1 + 1 file changed, 1 insertion(+)drivers/regulator/max20086-regulator.c +1
-0@@ -7,6 +7,7 @@#include <linux/err.h> #include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <linux/i2c.h> #include <linux/module.h> #include <linux/regmap.h>
Signature · 3 lines
Regards, Laurent Pinchart
Mark Brown
maintainerQuoted 11 lines · Randy Dunlap
max20086-regulator.cneeds <linux/gpio/consumer.h> for an enum, some macros, and a function prototype. (seen on ARCH=m68k)Adding this header file fixes multiple build errors:
../drivers/regulator/max20086-regulator.c: In function 'max20086_i2c_probe':../drivers/regulator/max20086-regulator.c:217:26: error: storage size of 'flags' isn't known
217 | enumgpiod_flagsflags;../drivers/regulator/max20086-regulator.c:261:27: error: 'GPIOD_OUT_HIGH' undeclared (first use in this function); did you mean 'GPIOF_INIT_HIGH'?261 | flags = boot_on ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW; | ^~~~~~~~~~~~~~
Quoted 8 lines
../drivers/regulator/max20086-regulator.c:261:44: error: 'GPIOD_OUT_LOW' undeclared (first use in this function); did you mean 'GPIOF_INIT_LOW'?
261 | flags =boot_on?GPIOD_OUT_HIGH:GPIOD_OUT_LOW;../drivers/regulator/max20086-regulator.c:262:27: error: implicit declaration of function 'devm_gpiod_get'; did you mean 'devm_gpio_free'? [-Werror=implicit-function-declaration]
262 |chip->ena_gpiod=devm_gpiod_get(chip->dev, "enable", flags);../drivers/regulator/max20086-regulator.c:217:26: warning: unused variable 'flags' [-Wunused-variable]
217 | enumgpiod_flagsflags;[...]
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-linus
Thanks!
[1/1] regulator: MAX20086: add gpio/consumer.h
commit: b4c18c18ebf7cf1e602af88c12ef9cb0d6e5ce51
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark