configs/pcengines_apu2_defconfig: bump kernel to 5.16
PATCH 1/1 configs/pcengines_apu2_defconfig: bump kernel to 5.16
This fixes the compile errors that were present with the previous kernel version (4.19).
--- configs/pcengines_apu2_defconfig | 22 ++++++++++++++++------ 1 file changed, 16 insertions(+), 6 deletions(-)
(quoted diff) +0 -0
b/configs/pcengines_apu2_defconfig index 68cebb8f6a..eb30f6aee7 100644
configs/pcengines_apu2_defconfig +16 -6
@@ -1,16 +1,26 @@ +# Architecture BR2_x86_64=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y -BR2_TARGET_GENERIC_HOSTNAME="apu2" -BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" -BR2_SYSTEM_DHCP="eth0" + +# Kernel +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_16=y BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.19.16" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.16" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/pcengines/apu2/linux.config" + +# Default hostname and TTY +BR2_TARGET_GENERIC_HOSTNAME="apu2" +BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" + +# Networking +BR2_SYSTEM_DHCP="eth0" + +# Rootfs BR2_TARGET_ROOTFS_EXT2=y BR2_TARGET_ROOTFS_ISO9660=y BR2_TARGET_ROOTFS_ISO9660_BOOT_MENU="board/pcengines/apu2/isolinux.cfg" BR2_TARGET_ROOTFS_ISO9660_HYBRID=y -# BR2_TARGET_ROOTFS_TAR is not set + +# Bootloader BR2_TARGET_SYSLINUX=y
--
2.34.1
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
Hi Danilo,
Quoted 2 lines · Danilo Bargen
This fixes the compile errors that were present with the previous kernel version (4.19).
Is there a build failure log url that you can point?
I would also mention that you are refactoring defconfig file in commit log.
Thank you!
Best regards
Signature · 2 lines
Giulio Benetti Benetti Engineering sas
Quoted 36 lines
Signed-off-by Danilo Bargen <[email protected]>--- configs/pcengines_apu2_defconfig | 22 ++++++++++++++++------ 1 file changed, 16 insertions(+), 6 deletions(-)--
2.34.1(quoted diff) +0
-0b/configs/pcengines_apu2_defconfig index
68cebb8f6a..eb30f6aee7100644configs/pcengines_apu2_defconfig +12
-5@@ -1,16 +1,26 @@ +# Architecture BR2_x86_64=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y -BR2_TARGET_GENERIC_HOSTNAME="apu2" -BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" -BR2_SYSTEM_DHCP="eth0" + +# Kernel +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_16=y BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.19.16" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.16" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/pcengines/apu2/linux.config" + +# Default hostname and TTY +BR2_TARGET_GENERIC_HOSTNAME="apu2" +BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" + +# Networking +BR2_SYSTEM_DHCP="eth0"
configs/pcengines_apu2_defconfig line 26
Quoted 10 lines
configs/pcengines_apu2_defconfig +4
-1+ +# Rootfs BR2_TARGET_ROOTFS_EXT2=y BR2_TARGET_ROOTFS_ISO9660=y BR2_TARGET_ROOTFS_ISO9660_BOOT_MENU="board/pcengines/apu2/isolinux.cfg" BR2_TARGET_ROOTFS_ISO9660_HYBRID=y -# BR2_TARGET_ROOTFS_TAR is not set + +# Bootloader BR2_TARGET_SYSLINUX=y
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
PATCH v2 1/1 configs/pcengines_apu2_defconfig: bump kernel to 5.16
This fixes the compile errors that were present with the previous kernel version (4.19):
https://gitlab.com/buildroot.org/buildroot/-/jobs/1970084022
Additionally, the defconfig file was refactored: Configuration values are now grouped logically, thus increasing readability and maintainability.
---
Changes v1 -> v2:
- improved commit message
--- configs/pcengines_apu2_defconfig | 22 ++++++++++++++++------ 1 file changed, 16 insertions(+), 6 deletions(-)
configs/pcengines_apu2_defconfig +16 -6
@@ -1,16 +1,26 @@ +# Architecture BR2_x86_64=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y -BR2_TARGET_GENERIC_HOSTNAME="apu2" -BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" -BR2_SYSTEM_DHCP="eth0" + +# Kernel +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_16=y BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.19.16" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.16" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/pcengines/apu2/linux.config" + +# Default hostname and TTY +BR2_TARGET_GENERIC_HOSTNAME="apu2" +BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" + +# Networking +BR2_SYSTEM_DHCP="eth0" + +# Rootfs BR2_TARGET_ROOTFS_EXT2=y BR2_TARGET_ROOTFS_ISO9660=y BR2_TARGET_ROOTFS_ISO9660_BOOT_MENU="board/pcengines/apu2/isolinux.cfg" BR2_TARGET_ROOTFS_ISO9660_HYBRID=y -# BR2_TARGET_ROOTFS_TAR is not set + +# Bootloader BR2_TARGET_SYSLINUX=y
--
2.34.1
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
Thomas Petazzoni
AppliedQuoted 10 lines · On Thu, 20 Jan 2022 00:03:30 +0100 Danilo Bargen <[email protected]> wrote:
This fixes the compile errors that were present with the previous kernel version (4.19):
https://gitlab.com/buildroot.org/buildroot/-/jobs/1970084022
Additionally, the defconfig file was refactored: Configuration values are now grouped logically, thus increasing readability and maintainability.
Signed-off-by Danilo Bargen <[email protected]>
Applied to master, with one change. See below.
configs/pcengines_apu2_defconfig line 15
Quoted 6 lines
configs/pcengines_apu2_defconfig +1
-1+# Rootfs BR2_TARGET_ROOTFS_EXT2=y BR2_TARGET_ROOTFS_ISO9660=y BR2_TARGET_ROOTFS_ISO9660_BOOT_MENU="board/pcengines/apu2/isolinux.cfg" BR2_TARGET_ROOTFS_ISO9660_HYBRID=y -# BR2_TARGET_ROOTFS_TAR is not set
Not clear why you dropped this line. So I re-added it.
Best regards,
Thomas
Signature · 7 lines
Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot