three bugfixes for hns3 PMD
cover three bugfixes for hns3 PMD
Three bugfixes:
fix vector burst unsupported when PTP enable
fix mailbox wait time uninitialization
fix Rx/Tx when fast path operation introduced
Huisong Li (1):
net/hns3: fix mailbox wait time uninitialization
Min Hu (Connor) (2):
net/hns3: fix Rx/Tx when fast path operation introduced net/hns3: fix vector burst unsupported when PTP enable
doc/guides/nics/hns3.rst | 5 +++ drivers/net/hns3/hns3_common.c | 8 ++++- drivers/net/hns3/hns3_ethdev.c | 8 +---- drivers/net/hns3/hns3_mp.c | 7 ++-- drivers/net/hns3/hns3_ptp.c | 1 + drivers/net/hns3/hns3_rxtx.c | 57 ++++++++++++++++++++++++-------- drivers/net/hns3/hns3_rxtx_vec.c | 20 ++++++----- 7 files changed, 72 insertions(+), 34 deletions(-)
Signature · 1 line
2.33.0
PATCH 1/3 net/hns3: fix Rx/Tx when fast path operation introduced
When fast path operation is introduced, the Rx/Tx function is done by object 'rte_eth_fp_ops'. So 'rte_eth_fp_ops' should be updated if 'fast-path functions' need to be changed, such as PMD receive function, prepare function and so on.
This patch fixed receiving packets bug when fast path operation is introduced.
--- drivers/net/hns3/hns3_mp.c | 7 ++----- drivers/net/hns3/hns3_rxtx.c | 28 +++++++++++++++++++++++++++- 2 files changed, 29 insertions(+), 6 deletions(-)
drivers/net/hns3/hns3_mp.c +2 -5
@@ -74,7 +74,6 @@ mp_secondary_handle(const struct rte_mp_msg *mp_msg, const void *peer)struct hns3_mp_param *res = (struct hns3_mp_param *)mp_res.param;const struct hns3_mp_param *param = (const struct hns3_mp_param *)mp_msg->param; -eth_tx_prep_t prep =NULL ;struct rte_eth_dev *dev;int ret;
@@ -98,14 +97,12 @@ mp_secondary_handle(const struct rte_mp_msg *mp_msg, const void *peer)case HNS3_MP_REQ_START_TX :PMD_INIT_LOG (INFO ,"port %u starting Tx datapath" , dev->data->port_id); - dev->tx_pkt_burst =hns3_get_tx_function (dev, &prep); - dev->tx_pkt_prepare = prep; +hns3_start_tx_datapath (dev);break ;case HNS3_MP_REQ_STOP_TX :PMD_INIT_LOG (INFO ,"port %u stopping Tx datapath" , dev->data->port_id); - dev->tx_pkt_burst = hns3_dummy_rxtx_burst; - dev->tx_pkt_prepare =NULL ; +hns3_stop_tx_datapath (dev);break ;default : rte_errno =EINVAL ;
drivers/net/hns3/hns3_rxtx.c +27 -1
@@ -4408,7 +4408,21 @@ hns3_trace_rxtx_function(struct rte_eth_dev *dev) rx_mode.info, tx_mode.info); } -void hns3_set_rxtx_function (struct rte_eth_dev *eth_dev) +static void +hns3_eth_dev_fp_ops_config (const struct rte_eth_dev *dev) +{ +struct rte_eth_fp_ops *fpo = rte_eth_fp_ops; +uint16_t port_id = dev->data->port_id; + + fpo[port_id].rx_pkt_burst = dev->rx_pkt_burst; + fpo[port_id].tx_pkt_burst = dev->tx_pkt_burst; + fpo[port_id].tx_pkt_prepare = dev->tx_pkt_prepare; + fpo[port_id].rx_descriptor_status = dev->rx_descriptor_status; + fpo[port_id].tx_descriptor_status = dev->tx_descriptor_status; +} + +void +hns3_set_rxtx_function (struct rte_eth_dev *eth_dev) {struct hns3_hw *hw =HNS3_DEV_PRIVATE_TO_HW (eth_dev->data->dev_private);struct hns3_adapter *hns = eth_dev->data->dev_private;
@@ -4429,6 +4443,8 @@ void hns3_set_rxtx_function(struct rte_eth_dev *eth_dev) eth_dev->tx_pkt_burst = hns3_dummy_rxtx_burst; eth_dev->tx_pkt_prepare =NULL ; } + +hns3_eth_dev_fp_ops_config (eth_dev); }void
@@ -4729,6 +4745,11 @@ hns3_stop_tx_datapath(struct rte_eth_dev *dev) { dev->tx_pkt_burst = hns3_dummy_rxtx_burst; dev->tx_pkt_prepare =NULL ; +hns3_eth_dev_fp_ops_config (dev); + +if (rte_eal_process_type () ==RTE_PROC_SECONDARY ) +return ; +rte_wmb ();/* Disable tx datapath on secondary process. */ hns3_mp_req_stop_tx (dev);
@@ -4743,5 +4764,10 @@ hns3_start_tx_datapath(struct rte_eth_dev *dev) dev->tx_pkt_burst =hns3_get_tx_function (dev, &prep); dev->tx_pkt_prepare = prep; +hns3_eth_dev_fp_ops_config (dev); + +if (rte_eal_process_type () ==RTE_PROC_SECONDARY ) +return ; +hns3_mp_req_start_tx (dev); }
Signature · 1 line
2.33.0
PATCH 2/3 net/hns3: fix mailbox wait time uninitialization
In reply to Min Hu (Connor)From: Huisong Li <[email protected]>
The mailbox wait time can be specified at runtime. But the variable that controls this time are not initialized when the variable isn't designated or is specified as an invalid value, which will fail to initialize device in the case where no device is bound to initialize the device.
--- drivers/net/hns3/hns3_common.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
drivers/net/hns3/hns3_common.c +7 -1
@@ -216,7 +216,7 @@ hns3_parse_mbx_time_limit(const char *key, const char *value, void *extra_args)/* * 500ms is empirical value in process of mailbox communication. If -* the delay value is set to one lower thanthe empirical value, mailbox +* the delay value is set to one lower than the empirical value, mailbox * communication may fail. */ if (val >HNS3_MBX_DEF_TIME_LIMIT_MS && val <=UINT16_MAX )
@@ -236,6 +236,12 @@ hns3_parse_devargs(struct rte_eth_dev *dev)uint64_t dev_caps_mask =0 ;struct rte_kvargs *kvlist; +/* Set default value of runtime config parameters. */ + hns->rx_func_hint =HNS3_IO_FUNC_HINT_NONE ; + hns->tx_func_hint =HNS3_IO_FUNC_HINT_NONE ; + hns->dev_caps_mask =0 ; + hns->mbx_time_limit_ms =HNS3_MBX_DEF_TIME_LIMIT_MS ; +if (dev->device->devargs ==NULL )return ;
Signature · 1 line
2.33.0
PATCH 3/3 net/hns3: fix vector burst unsupported when PTP enable
In reply to Min Hu (Connor)If hardware supports IEEE 1588 PTP, PTP capability will be set. Currently, vec and sve burst is unsupported when PTP capability is set.
For sake of Rx/Tx performance, IEEE 1588 PTP is not supported in sve or vec burst mode. When enabling IEEE 1588 PTP, Rx/Tx burst mode should be simple or common. Rx/Tx burst mode could be set like this, for example:
-a 0000:35:00.0,rx_func_hint=common,tx_func_hint=common
This patch supports vec and sve burst when PTP is disabled. And only support simple or common burst When PTP is enabled.
--- doc/guides/nics/hns3.rst | 5 +++++ drivers/net/hns3/hns3_ethdev.c | 8 +------- drivers/net/hns3/hns3_ptp.c | 1 + drivers/net/hns3/hns3_rxtx.c | 29 +++++++++++++++++------------ drivers/net/hns3/hns3_rxtx_vec.c | 20 ++++++++++++-------- 5 files changed, 36 insertions(+), 27 deletions(-)
doc/guides/nics/hns3.rst +5 -0
@@ -290,5 +290,10 @@ Currently, we only support VF device driven by DPDK driver when PF is driven by kernel mode hns3 ethdev driver. VF is not supported when PF is driven by DPDK driver. +For sake of Rx/Tx performance, IEEE 1588 is not supported when using vec or +sve burst function. When enabling IEEE 1588, Rx/Tx burst mode should be +simple or common. It is recommended that enable IEEE 1588 before ethdev +start. In this way, the correct Rx/Tx burst function can be selected. + Build with ICC is not supported yet. X86-32, Power8, ARMv7 and BSD are not supported yet.
drivers/net/hns3/hns3_ethdev.c +1 -7
@@ -227,17 +227,11 @@ hns3_check_event_cause(struct hns3_adapter *hns, uint32_t *clearval)return ret; } -static bool -hns3_is_1588_event_type (uint32_t event_type) -{ -return (event_type ==HNS3_VECTOR0_EVENT_PTP ); -} -static void hns3_clear_event_cause (struct hns3_hw *hw,uint32_t event_type,uint32_t regclr) {if (event_type ==HNS3_VECTOR0_EVENT_RST || -hns3_is_1588_event_type (event_type)) + event_type ==HNS3_VECTOR0_EVENT_PTP )hns3_write_dev (hw,HNS3_MISC_RESET_STS_REG , regclr);else if (event_type ==HNS3_VECTOR0_EVENT_MBX )hns3_write_dev (hw,HNS3_VECTOR0_CMDQ_SRC_REG , regclr);
drivers/net/hns3/hns3_ptp.c +1 -0
@@ -125,6 +125,7 @@ hns3_timesync_enable(struct rte_eth_dev *dev)if (pf->ptp_enable)return 0 ; +hns3_warn (hw,"note: please ensure Rx/Tx burst mode is simple or common when enabling PTP!" );rte_spinlock_lock (&hw->lock); ret =hns3_timesync_configure (hns, true);
drivers/net/hns3/hns3_rxtx.c +17 -12
@@ -2388,14 +2388,14 @@ hns3_rx_alloc_buffer(struct hns3_rx_queue *rxq)return rte_mbuf_raw_alloc (rxq->mb_pool); } -static inline void +static void hns3_rx_ptp_timestamp_handle (struct hns3_rx_queue *rxq,struct rte_mbuf *mbuf, -volatile struct hns3_desc *rxd) +uint64_t timestamp) {struct hns3_pf *pf =HNS3_DEV_PRIVATE_TO_PF (rxq->hns); -uint64_t timestamp =rte_le_to_cpu_64 (rxd->timestamp); - mbuf->ol_flags |=RTE_MBUF_F_RX_IEEE1588_PTP |RTE_MBUF_F_RX_IEEE1588_TMST ; + mbuf->ol_flags |=RTE_MBUF_F_RX_IEEE1588_PTP | +RTE_MBUF_F_RX_IEEE1588_TMST ;if (hns3_timestamp_rx_dynflag >0 ) { *RTE_MBUF_DYNFIELD (mbuf, hns3_timestamp_dynfield_offset, rte_mbuf_timestamp_t *) = timestamp;
@@ -2469,7 +2469,8 @@ hns3_recv_pkts_simple(void *rx_queue, rxe->mbuf = nmb;if (unlikely (bd_base_info &BIT (HNS3_RXD_TS_VLD_B ))) -hns3_rx_ptp_timestamp_handle (rxq, rxm, rxdp); +hns3_rx_ptp_timestamp_handle (rxq, rxm, +rte_le_to_cpu_64 (rxdp->timestamp)); dma_addr =rte_mbuf_data_iova_default (nmb); rxdp->addr =rte_cpu_to_le_64 (dma_addr);
@@ -2540,6 +2541,7 @@ hns3_recv_scattered_pkts(void *rx_queue,struct rte_mbuf *rxm;struct rte_eth_dev *dev;uint32_t bd_base_info; +uint64_t timestamp;uint32_t l234_info;uint32_t gro_size;uint32_t ol_info;
@@ -2649,6 +2651,9 @@ hns3_recv_scattered_pkts(void *rx_queue, rxm = rxe->mbuf; rxe->mbuf = nmb; +if (unlikely (bd_base_info &BIT (HNS3_RXD_TS_VLD_B ))) + timestamp =rte_le_to_cpu_64 (rxdp->timestamp); + dma_addr =rte_cpu_to_le_64 (rte_mbuf_data_iova_default (nmb)); rxdp->rx.bd_base_info =0 ; rxdp->addr = dma_addr;
@@ -2671,7 +2676,7 @@ hns3_recv_scattered_pkts(void *rx_queue, }if (unlikely (bd_base_info &BIT (HNS3_RXD_TS_VLD_B ))) -hns3_rx_ptp_timestamp_handle (rxq, first_seg, rxdp); +hns3_rx_ptp_timestamp_handle (rxq, first_seg, timestamp);/* * The last buffer of the received packet. packet len from
@@ -4044,7 +4049,7 @@ static inline void hns3_tx_setup_4bd(struct hns3_desc *txdp, struct rte_mbuf **pkts) { #define PER_LOOP_NUM 4 - const uint16_t bd_flag = BIT(HNS3_TXD_VLD_B) | BIT(HNS3_TXD_FE_B); + uint16_t bd_flag = BIT(HNS3_TXD_VLD_B) | BIT(HNS3_TXD_FE_B);uint64_t dma_addr;uint32_t i;
@@ -4055,6 +4060,8 @@ hns3_tx_setup_4bd(struct hns3_desc *txdp, struct rte_mbuf **pkts) txdp->tx.paylen_fd_dop_ol4cs =0 ; txdp->tx.type_cs_vlan_tso_len =0 ; txdp->tx.ol_type_vlan_len_msec =0 ; +if (unlikely ((*pkts)->ol_flags &RTE_MBUF_F_TX_IEEE1588_TMST )) + bd_flag |=BIT (HNS3_TXD_TSYN_B ); txdp->tx.tp_fe_sc_vld_ra_ri =rte_cpu_to_le_16 (bd_flag); } }
@@ -4062,7 +4069,7 @@ hns3_tx_setup_4bd(struct hns3_desc *txdp, struct rte_mbuf **pkts)static inline void hns3_tx_setup_1bd (struct hns3_desc *txdp,struct rte_mbuf **pkts) { -const uint16_t bd_flag =BIT (HNS3_TXD_VLD_B ) |BIT (HNS3_TXD_FE_B ); +uint16_t bd_flag =BIT (HNS3_TXD_VLD_B ) |BIT (HNS3_TXD_FE_B );uint64_t dma_addr; dma_addr =rte_mbuf_data_iova (*pkts);
@@ -4071,6 +4078,8 @@ hns3_tx_setup_1bd(struct hns3_desc *txdp, struct rte_mbuf **pkts) txdp->tx.paylen_fd_dop_ol4cs =0 ; txdp->tx.type_cs_vlan_tso_len =0 ; txdp->tx.ol_type_vlan_len_msec =0 ; +if (unlikely ((*pkts)->ol_flags &RTE_MBUF_F_TX_IEEE1588_TMST )) + bd_flag |=BIT (HNS3_TXD_TSYN_B ); txdp->tx.tp_fe_sc_vld_ra_ri =rte_cpu_to_le_16 (bd_flag); }
@@ -4312,10 +4321,6 @@ hns3_tx_check_simple_support(struct rte_eth_dev *dev) {uint64_t offloads = dev->data->dev_conf.txmode.offloads; -struct hns3_hw *hw =HNS3_DEV_PRIVATE_TO_HW (dev->data->dev_private); -if (hns3_dev_get_support (hw,PTP )) -return false; -return (offloads == (offloads &RTE_ETH_TX_OFFLOAD_MBUF_FAST_FREE )); }
drivers/net/hns3/hns3_rxtx_vec.c +12 -8
@@ -17,15 +17,17 @@ int hns3_tx_check_vec_support(struct rte_eth_dev *dev) {struct rte_eth_txmode *txmode = &dev->data->dev_conf.txmode; - -struct hns3_hw *hw =HNS3_DEV_PRIVATE_TO_HW (dev->data->dev_private); -if (hns3_dev_get_support (hw,PTP )) -return -ENOTSUP ; +struct hns3_adapter *hns = dev->data->dev_private; +struct hns3_pf *pf = &hns->pf;/* Only support RTE_ETH_TX_OFFLOAD_MBUF_FAST_FREE */ if (txmode->offloads !=RTE_ETH_TX_OFFLOAD_MBUF_FAST_FREE )return -ENOTSUP ; +/* Vec is not supported when PTP enabled */ +if (pf->ptp_enable) +return -ENOTSUP ; +return 0 ; }
@@ -232,10 +234,8 @@ hns3_rx_check_vec_support(struct rte_eth_dev *dev)struct rte_eth_rxmode *rxmode = &dev->data->dev_conf.rxmode;uint64_t offloads_mask =RTE_ETH_RX_OFFLOAD_TCP_LRO |RTE_ETH_RX_OFFLOAD_VLAN ; - -struct hns3_hw *hw =HNS3_DEV_PRIVATE_TO_HW (dev->data->dev_private); -if (hns3_dev_get_support (hw,PTP )) -return -ENOTSUP ; +struct hns3_adapter *hns = dev->data->dev_private; +struct hns3_pf *pf = &hns->pf;if (dev->data->scattered_rx)return -ENOTSUP ;
@@ -249,5 +249,9 @@ hns3_rx_check_vec_support(struct rte_eth_dev *dev)if (hns3_rxq_iterate (dev, hns3_rxq_vec_check,NULL ) !=0 )return -ENOTSUP ; +/* Vec is not supported when PTP enabled */ +if (pf->ptp_enable) +return -ENOTSUP ; +return 0 ; }
Signature · 1 line
2.33.0
Quoted 5 lines · Min Hu (Connor)
Three bugfixes:
fix vector burst unsupported when PTP enable
fix mailbox wait time uninitialization
fix Rx/Tx when fast path operation introduced
Quoted 7 lines
Huisong Li (1):
net/hns3: fix mailbox wait time uninitializationMin Hu (Connor) (2):
net/hns3: fix Rx/Tx when fast path operation introduced net/hns3: fix vector burst unsupported when PTP enable
Series applied to dpdk-next-net/main, thanks.