mmc: mediatek: add support for SDIO eint IRQ
v3 cover mmc: mediatek: add support for SDIO eint IRQ
Changes in v3:
- correct abbreviations with capital letters in commit message
- replace copyright year with 2022 in mtk-sd.c
- remove unnessary pointer casting
- adjust variable order to reversed xmas tree
- remove a redundant blank line
- refine if statement, following standard pattern
Axe Yang (3):
dt-bindings: mmc: add cap-sdio-async-irq flag
mmc: core: Add support for SDIO async interrupt
mmc: mediatek: add support for SDIO eint IRQ
.../bindings/mmc/mmc-controller.yaml | 5 + drivers/mmc/core/host.c | 2 + drivers/mmc/core/sdio.c | 17 +++ drivers/mmc/host/mtk-sd.c | 125 ++++++++++++++++-- include/linux/mmc/card.h | 3 +- include/linux/mmc/host.h | 1 + include/linux/mmc/sdio.h | 5 + 7 files changed, 149 insertions(+), 9 deletions(-)
Signature · 1 line
2.25.1
PATCH RESEND v3 1/3 dt-bindings: mmc: add cap-sdio-async-irq flag
Asynchronous interrupt is a mechanism that allow SDIO devices alarm interrupt when host stop providing clock to card. Add a DT flag to enable this feature if it is supported by SDIO card.
--- Documentation/devicetree/bindings/mmc/mmc-controller.yaml | 5 +++++ 1 file changed, 5 insertions(+)
Documentation/devicetree/bindings/mmc/mmc-controller.yaml +5 -0
@@ -165,6 +165,11 @@ properties: description: eMMC hardware reset is supported + cap-sdio-async-irq: + $ref: /schemas/types.yaml#/definitions/flag + description: + SDIO async interrupt is supported. + cap-sdio-irq: $ref: /schemas/types.yaml#/definitions/flag description:
Signature · 1 line
2.25.1
PATCH RESEND v3 2/3 mmc: core: Add support for SDIO async interrupt
In reply to Axe YangIf cap-sdio-async-irq flag is set in host dts node, parse EAI information from SDIO CCCR interrupt externsion segment. If async interrupt is supported by SDIO card then send command to card to enable it and set enable_async_irq flag in sdio_cccr structure to 1. The parse flow is implemented in sdio_read_cccr().
--- drivers/mmc/core/host.c | 2 ++ drivers/mmc/core/sdio.c | 17 +++++++++++++++++ include/linux/mmc/card.h | 3 ++- include/linux/mmc/host.h | 1 + include/linux/mmc/sdio.h | 5 +++++ 5 files changed, 27 insertions(+), 1 deletion(-)
drivers/mmc/core/host.c +2 -0
@@ -410,6 +410,8 @@ int mmc_of_parse(struct mmc_host *host)if (device_property_read_bool (dev,"no-mmc-hs400" )) host->caps2 &= ~(MMC_CAP2_HS400_1_8V |MMC_CAP2_HS400_1_2V |MMC_CAP2_HS400_ES ); +if (device_property_read_bool (dev,"cap-sdio-async-irq" )) + host->caps2 |=MMC_CAP2_SDIO_ASYNC_IRQ ;/* Must be after "non-removable" check */ if (device_property_read_u32 (dev,"fixed-emmc-driver-type" , &drv_type) ==0 ) {
drivers/mmc/core/sdio.c +17 -0
@@ -225,6 +225,23 @@ static int sdio_read_cccr(struct mmc_card *card, u32 ocr) card->sw_caps.sd3_drv_type |=SD_DRIVER_TYPE_C ;if (data &SDIO_DRIVE_SDTD ) card->sw_caps.sd3_drv_type |=SD_DRIVER_TYPE_D ; + +if (card->host->caps2 &MMC_CAP2_SDIO_ASYNC_IRQ ) { + ret =mmc_io_rw_direct (card,0 ,0 ,SDIO_CCCR_INTERRUPT_EXT ,0 , + &data); +if (ret) + goto out; + +if (data &SDIO_INTERRUPT_EXT_SAI ) { + data |=SDIO_INTERRUPT_EXT_EAI ; + ret =mmc_io_rw_direct (card,1 ,0 ,SDIO_CCCR_INTERRUPT_EXT , + data,NULL ); +if (ret) + goto out; + + card->cccr.enable_async_irq =1 ; + } + } }/* if no uhs mode ensure we check for high speed */
include/linux/mmc/card.h +2 -1
@@ -219,7 +219,8 @@ struct sdio_cccr { wide_bus:1, high_power:1, high_speed:1, - disable_cd:1; + disable_cd:1, + enable_async_irq:1; };struct sdio_cis {
include/linux/mmc/host.h +1 -0
@@ -402,6 +402,7 @@ struct mmc_host {#define MMC_CAP2_CRYPTO 0#endif #define MMC_CAP2_ALT_GPT_TEGRA (1 << 28)/* Host with eMMC that has GPT entry at a non-standard location */ +#define MMC_CAP2_SDIO_ASYNC_IRQ (1 << 29)/* SDIO host supports asynchronous interrupt */ int fixed_drv_type;/* fixed driver type for non-removable media */
include/linux/mmc/sdio.h +5 -0
@@ -159,6 +159,11 @@#define SDIO_DTSx_SET_TYPE_A (1 << SDIO_DRIVE_DTSx_SHIFT)#define SDIO_DTSx_SET_TYPE_C (2 << SDIO_DRIVE_DTSx_SHIFT)#define SDIO_DTSx_SET_TYPE_D (3 << SDIO_DRIVE_DTSx_SHIFT) + +#define SDIO_CCCR_INTERRUPT_EXT 0x16 +#define SDIO_INTERRUPT_EXT_SAI (1 << 0) +#define SDIO_INTERRUPT_EXT_EAI (1 << 1) +/* * Function Basic Registers (FBR) */
Signature · 1 line
2.25.1
PATCH RESEND v3 3/3 mmc: mediatek: add support for SDIO eint IRQ
In reply to Axe YangAdd support for eint IRQ when MSDC is used as an SDIO host. This feature requires SDIO device support async IRQ function. With this feature, SDIO host can be awakened by SDIO card in suspend state, without additional pin.
MSDC driver will time-share the SDIO DAT1 pin. During suspend, MSDC turn off clock and switch SDIO DAT1 pin to GPIO mode. And during resume, switch GPIO function back to DAT1 mode then turn on clock.
Some device tree property should be added or modified in MSDC node to support SDIO eint IRQ. Pinctrls named state_dat1 and state_eint are mandatory. And cap-sdio-async-irq flag is necessary since this feature depends on asynchronous interrupt:
&mmcX {
...
pinctrl-names = "default", "state_uhs", "state_eint",
"state_dat1";
...
pinctrl-2 = <&mmc2_pins_eint>;
pinctrl-3 = <&mmc2_pins_dat1>;
...
cap-sdio-async-irq;
...
};--- drivers/mmc/host/mtk-sd.c | 125 +++++++++++++++++++++++++++++++++++--- 1 file changed, 117 insertions(+), 8 deletions(-)
drivers/mmc/host/mtk-sd.c +117 -8
@@ -1,6 +1,6 @@// SPDX-License-Identifier: GPL-2.0-only /* -* Copyright (c) 2014-2015 MediaTek Inc. +* Copyright (c) 2022 MediaTek Inc. * Author: Chaotian.Jing <[email protected]> */
@@ -9,6 +9,7 @@#include <linux/clk.h> #include <linux/delay.h> #include <linux/dma-mapping.h> +#include <linux/gpio/consumer.h> #include <linux/iopoll.h> #include <linux/ioport.h> #include <linux/irq.h>
@@ -440,8 +441,12 @@ struct msdc_host {struct pinctrl *pinctrl;struct pinctrl_state *pins_default;struct pinctrl_state *pins_uhs; +struct pinctrl_state *pins_eint; +struct pinctrl_state *pins_dat1;struct delayed_work req_timeout;int irq;/* host interrupt */ +int eint_irq;/* device interrupt */ +int sdio_irq_cnt;/* irq enable cnt */ struct reset_control *reset;struct clk *src_clk;/* msdc source clock */
@@ -465,6 +470,7 @@ struct msdc_host {bool hs400_tuning;/* hs400 mode online tuning */ bool internal_cd;/* Use internal card-detect logic */ bool cqhci;/* support eMMC hw cmdq */ +bool sdio_eint_ready;/* Ready to support SDIO eint interrupt */ struct msdc_save_para save_para;/* used when gate HCLK */ struct msdc_tune_para def_tune_para;/* default tune setting */ struct msdc_tune_para saved_tune_para;/* tune result of CMD21/CMD19 */
@@ -1527,10 +1533,12 @@ static void msdc_enable_sdio_irq(struct mmc_host *mmc, int enb)__msdc_enable_sdio_irq (host, enb);spin_unlock_irqrestore (&host->lock, flags); -if (enb) -pm_runtime_get_noresume (host->dev); -else -pm_runtime_put_noidle (host->dev); +if (mmc->card && !mmc->card->cccr.enable_async_irq) { +if (enb) +pm_runtime_get_noresume (host->dev); +else +pm_runtime_put_noidle (host->dev); + } }static irqreturn_t msdc_cmdq_irq (struct msdc_host *host,u32 intsts)
@@ -2461,6 +2469,50 @@ static const struct mmc_host_ops mt_msdc_ops = { .hw_reset = msdc_hw_reset, }; +static irqreturn_t msdc_sdio_eint_irq (int irq,void *dev_id) +{ +struct msdc_host *host = dev_id; +struct mmc_host *mmc =mmc_from_priv (host); +unsigned long flags; + +spin_lock_irqsave (&host->lock, flags); +if (likely (host->sdio_irq_cnt >0 )) { +disable_irq_nosync (host->eint_irq); +disable_irq_wake (host->eint_irq); + host->sdio_irq_cnt--; + } +spin_unlock_irqrestore (&host->lock, flags); + +sdio_signal_irq (mmc); + +return IRQ_HANDLED ; +} + +static int msdc_request_dat1_eint_irq (struct msdc_host *host) +{ +struct gpio_desc *desc; +int irq, ret; + + desc =devm_gpiod_get (host->dev,"eint" ,GPIOD_IN ); +if (IS_ERR (desc)) +return PTR_ERR (desc); + + ret =gpiod_to_irq (desc); +if (ret <0 ) +return ret; + + irq = ret; + ret =devm_request_threaded_irq (host->dev, irq,NULL , msdc_sdio_eint_irq, +IRQF_TRIGGER_LOW |IRQF_ONESHOT |IRQF_NO_AUTOEN , +"sdio-eint" , host); +if (ret) +return ret; + + host->eint_irq = irq; + +return 0 ; +} +static const struct cqhci_host_ops msdc_cmdq_ops = { .enable = msdc_cqe_enable, .disable = msdc_cqe_disable,
@@ -2631,6 +2683,23 @@ static int msdc_drv_probe(struct platform_device *pdev) goto host_free; } +if (!(mmc->caps2 &MMC_CAP2_NO_SDIO )) { +/* Support for SDIO eint irq */ + host->pins_eint =pinctrl_lookup_state (host->pinctrl,"state_eint" ); +if (IS_ERR (host->pins_eint)) { +dev_dbg (&pdev->dev,"Cannot find pinctrl eint!\n" ); + }else { + host->pins_dat1 =pinctrl_lookup_state (host->pinctrl,"state_dat1" ); +if (IS_ERR (host->pins_dat1)) { + ret =dev_err_probe (&pdev->dev,PTR_ERR (host->pins_dat1), +"Cannot find pinctrl dat1!\n" ); + goto host_free; + } + + host->sdio_eint_ready = true; + } + } +msdc_of_property_parse (pdev, host); host->dev = &pdev->dev;
@@ -2722,6 +2791,16 @@ static int msdc_drv_probe(struct platform_device *pdev)if (ret) goto release; +if (host->sdio_eint_ready) { + ret =msdc_request_dat1_eint_irq (host); +if (ret) { +dev_err (host->dev,"Failed to register data1 eint irq!\n" ); + goto release; + } + +pinctrl_select_state (host->pinctrl, host->pins_dat1); + } +pm_runtime_set_active (host->dev);pm_runtime_set_autosuspend_delay (host->dev,MTK_MMC_AUTOSUSPEND_DELAY );pm_runtime_use_autosuspend (host->dev);
@@ -2841,16 +2920,31 @@ static void msdc_restore_reg(struct msdc_host *host)static int __maybe_unused msdc_runtime_suspend (struct device *dev) { +unsigned long flags;struct mmc_host *mmc =dev_get_drvdata (dev);struct msdc_host *host =mmc_priv (mmc);msdc_save_reg (host); + +if (host->sdio_eint_ready) { +disable_irq (host->irq); +pinctrl_select_state (host->pinctrl, host->pins_eint); +spin_lock_irqsave (&host->lock, flags); +if (host->sdio_irq_cnt ==0 ) { +enable_irq (host->eint_irq); +enable_irq_wake (host->eint_irq); + host->sdio_irq_cnt++; + } +sdr_clr_bits (host->base +SDC_CFG ,SDC_CFG_SDIOIDE ); +spin_unlock_irqrestore (&host->lock, flags); + }msdc_gate_clock (host);return 0 ; }static int __maybe_unused msdc_runtime_resume (struct device *dev) { +unsigned long flags;struct mmc_host *mmc =dev_get_drvdata (dev);struct msdc_host *host =mmc_priv (mmc);int ret;
@@ -2860,10 +2954,25 @@ static int __maybe_unused msdc_runtime_resume(struct device *dev)return ret;msdc_restore_reg (host); + +if (host->sdio_eint_ready) { +spin_lock_irqsave (&host->lock, flags); +if (host->sdio_irq_cnt >0 ) { +disable_irq_nosync (host->eint_irq); +disable_irq_wake (host->eint_irq); + host->sdio_irq_cnt--; +sdr_set_bits (host->base +SDC_CFG ,SDC_CFG_SDIOIDE ); + }else { +sdr_clr_bits (host->base +MSDC_INTEN ,MSDC_INTEN_SDIOIRQ ); + } +spin_unlock_irqrestore (&host->lock, flags); +pinctrl_select_state (host->pinctrl, host->pins_uhs); +enable_irq (host->irq); + }return 0 ; } -static int __maybe_unused msdc_suspend (struct device *dev) +static int __maybe_unused msdc_suspend_noirq (struct device *dev) {struct mmc_host *mmc =dev_get_drvdata (dev);int ret;
@@ -2877,13 +2986,13 @@ static int __maybe_unused msdc_suspend(struct device *dev)return pm_runtime_force_suspend (dev); } -static int __maybe_unused msdc_resume (struct device *dev) +static int __maybe_unused msdc_resume_noirq (struct device *dev) {return pm_runtime_force_resume (dev); }static const struct dev_pm_ops msdc_dev_pm_ops = { - SET_SYSTEM_SLEEP_PM_OPS(msdc_suspend, msdc_resume) + SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(msdc_suspend_noirq, msdc_resume_noirq)SET_RUNTIME_PM_OPS (msdc_runtime_suspend, msdc_runtime_resume,NULL ) };
Signature · 1 line
2.25.1
Quoted 25 lines · Axe Yang
Add support for eint IRQ when MSDC is used as an SDIO host. This feature requires SDIO device support async IRQ function. With this feature, SDIO host can be awakened by SDIO card in suspend state, without additional pin.
MSDC driver will time-share the SDIO DAT1 pin. During suspend, MSDC turn off clock and switch SDIO DAT1 pin to GPIO mode. And during resume, switch GPIO function back to DAT1 mode then turn on clock.
Some device tree property should be added or modified in MSDC node to support SDIO eint IRQ. Pinctrls named
state_dat1andstate_eintare mandatory. And cap-sdio-async-irq flag is necessary since this feature depends on asynchronous interrupt:&mmcX { ... pinctrl-names = "default", "state_uhs", "state_eint", "state_dat1"; ... pinctrl-2 = <&mmc2_pins_eint>; pinctrl-3 = <&mmc2_pins_dat1>; ... cap-sdio-async-irq; ... };
...
drivers/mmc/host/mtk-sd.c static const struct mmc_host_ops mt_msdc_ops = { · line 2476
Quoted 6 lines
drivers/mmc/host/mtk-sd.c +5
-0+static irqreturn_t msdc_sdio_eint_irq (int irq,void *dev_id) +{ +struct msdc_host *host = dev_id; +struct mmc_host *mmc =mmc_from_priv (host); +unsigned long flags;
Same Q as per v2. Why do you need this?
Yes, you did the first step to the answer, but I want you to go deeper and tell me why you need the spin_lock_irqsave() variant.
Quoted 12 lines
drivers/mmc/host/mtk-sd.c +12
-0+spin_lock_irqsave (&host->lock, flags); +if (likely (host->sdio_irq_cnt >0 )) { +disable_irq_nosync (host->eint_irq); +disable_irq_wake (host->eint_irq); + host->sdio_irq_cnt--; + } +spin_unlock_irqrestore (&host->lock, flags); + +sdio_signal_irq (mmc); + +return IRQ_HANDLED ; +}
Signature · 7 lines
With Best Regards, Andy Shevchenko _______________________________________________ Linux-mediatek mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-mediatek
Quoted 39 lines · Andy Shevchenko
Quoted 26 lines · Axe Yang
Add support for eint IRQ when MSDC is used as an SDIO host. This feature requires SDIO device support async IRQ function. With this feature, SDIO host can be awakened by SDIO card in suspend state, without additional pin.
MSDC driver will time-share the SDIO DAT1 pin. During suspend, MSDC turn off clock and switch SDIO DAT1 pin to GPIO mode. And during resume, switch GPIO function back to DAT1 mode then turn on clock.
Some device tree property should be added or modified in MSDC node to support SDIO eint IRQ. Pinctrls named
state_dat1andstate_eintare mandatory. And cap-sdio-async-irq flag is necessary since this feature depends on asynchronous interrupt:&mmcX { ... pinctrl-names = "default", "state_uhs", "state_eint", "state_dat1"; ... pinctrl-2 = <&mmc2_pins_eint>; pinctrl-3 = <&mmc2_pins_dat1>; ... cap-sdio-async-irq; ... };...
drivers/mmc/host/mtk-sd.c static const struct mmc_host_ops mt_msdc_ops = { · line 2476
Quoted 5 lines
drivers/mmc/host/mtk-sd.c +5
-0+static irqreturn_t msdc_sdio_eint_irq (int irq,void *dev_id) +{ +struct msdc_host *host = dev_id; +struct mmc_host *mmc =mmc_from_priv (host); +unsigned long flags;Same Q as per v2. Why do you need this?
Quoted 3 lines
Yes, you did the first step to the answer, but I want you to go deeper
and tell me why you need thespin_lock_irqsave()variant.
You are right, no need to save/restore flags in irq handler. Will fix it in new version.
Thanks.
Quoted 15 lines
Quoted 13 lines
drivers/mmc/host/mtk-sd.c +12
-0+spin_lock_irqsave (&host->lock, flags); +if (likely (host->sdio_irq_cnt >0 )) { +disable_irq_nosync (host->eint_irq); +disable_irq_wake (host->eint_irq); + host->sdio_irq_cnt--; + } +spin_unlock_irqrestore (&host->lock, flags); + +sdio_signal_irq (mmc); + +return IRQ_HANDLED ; +}