Skip to contentSkip to conversation

Bluetooth: Fix debugfs entry leak in hci_register_dev()

PATCH In review Sasha Levin 3 participants 193 messages Jan 18, 2022 – Jan 22, 2022 Page 2 of 2

Subsystems (33)
lore
Share & tools
lore
author maintainer
#158 lore raw

PATCH 154/188 ACPICA: Executer: Fix the REFCLASS_REFOF case in acpi_ex_opcode_1A_0T_1R()

In reply to Sasha Levin

From: "Rafael J. Wysocki" <[email protected]>

[ Upstream commit 24ea5f90ec9548044a6209685c5010edd66ffe8f ]

ACPICA commit d984f12041392fa4156b52e2f7e5c5e7bc38ad9e

If Operand[0] is a reference of the ACPI_REFCLASS_REFOF class, acpi_ex_opcode_1A_0T_1R () calls acpi_ns_get_attached_object () to obtain return_desc which may require additional resolution with the help of acpi_ex_read_data_from_field (). If the latter fails, the reference counter of the original return_desc is decremented which is incorrect, because acpi_ns_get_attached_object () does not increment the reference counter of the object returned by it.

This issue may lead to premature deletion of the attached object while it is still attached and a use-after-free and crash in the host OS. For example, this may happen when on evaluation of ref_of() a local region field where there is no registered handler for the given Operation Region.

Fix it by making acpi_ex_opcode_1A_0T_1R () return Status right away after a acpi_ex_read_data_from_field () failure.

---
 drivers/acpi/acpica/exoparg1.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/acpi/acpica/exoparg1.c +2 -1
index b639e930d6429..44b7c350ed5ca 100644
@@ -1007,7 +1007,8 @@ acpi_status acpi_ex_opcode_1A_0T_1R(struct acpi_walk_state *walk_state)
 						    (walk_state, return_desc,
 						     &temp_desc);
 						if (ACPI_FAILURE(status)) {
-							goto cleanup;
+							return_ACPI_STATUS
+							    (status);
 						}
 
 						return_desc = temp_desc;
Signature · 1 line
2.34.1
author maintainer
#159 lore raw

PATCH 155/188 ACPICA: Fix wrong interpretation of PCC address

In reply to Sasha Levin

From: Sudeep Holla <[email protected]>

[ Upstream commit 9a3b8655db1ada31c82189ae13f40eb25da48c35 ]

ACPICA commit 41be6afacfdaec2dba3a5ed368736babc2a7aa5c

With the PCC Opregion in the firmware and we are hitting below kernel crash:

-->8

Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010
 Workqueue: pm pm_runtime_work
 pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
 pc : __memcpy+0x54/0x260
 lr : acpi_ex_write_data_to_field+0xb8/0x194
 Call trace:
  __memcpy+0x54/0x260
  acpi_ex_store_object_to_node+0xa4/0x1d4
  acpi_ex_store+0x44/0x164
  acpi_ex_opcode_1A_1T_1R+0x25c/0x508
  acpi_ds_exec_end_op+0x1b4/0x44c
  acpi_ps_parse_loop+0x3a8/0x614
  acpi_ps_parse_aml+0x90/0x2f4
  acpi_ps_execute_method+0x11c/0x19c
  acpi_ns_evaluate+0x1ec/0x2b0
  acpi_evaluate_object+0x170/0x2b0
  acpi_device_set_power+0x118/0x310
  acpi_dev_suspend+0xd4/0x180
  acpi_subsys_runtime_suspend+0x28/0x38
  __rpm_callback+0x74/0x328
  rpm_suspend+0x2d8/0x624
  pm_runtime_work+0xa4/0xb8
  process_one_work+0x194/0x25c
  worker_thread+0x260/0x49c
  kthread+0x14c/0x30c
  ret_from_fork+0x10/0x20
 Code: f9000006 f81f80a7 d65f03c0 361000c2 (b9400026)
 ---[ end trace 24d8a032fa77b68a ]---

The reason for the crash is that the PCC channel index passed via region.address in acpi_ex_store_object_to_node is interpreted as the channel subtype incorrectly.

Assuming the PCC op_region support is not used by any other type, let us remove the subtype check as the AML has no access to the subtype information. Once we remove it, the kernel crash disappears and correctly complains about missing PCC Opregion handler.

ACPI Error: No handler for Region [PFRM] ((____ptrval____)) [PCC] (20210730/evregion-130) ACPI Error: Region PCC (ID=10) has no handler (20210730/exfldio-261)
ACPI Error: Aborting method \_SB.ETH0._PS3 due to previous error (AE_NOT_EXIST) (20210730/psparse-531)

---
 drivers/acpi/acpica/exfield.c | 7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)
drivers/acpi/acpica/exfield.c +1 -6
index 06f3c9df1e22d..8618500f23b39 100644
@@ -330,12 +330,7 @@ acpi_ex_write_data_to_field(union acpi_operand_object *source_desc,
 		       obj_desc->field.base_byte_offset,
 		       source_desc->buffer.pointer, data_length);
 
-		if ((obj_desc->field.region_obj->region.address ==
-		     PCC_MASTER_SUBSPACE
-		     && MASTER_SUBSPACE_COMMAND(obj_desc->field.
-						base_byte_offset))
-		    || GENERIC_SUBSPACE_COMMAND(obj_desc->field.
-						base_byte_offset)) {
+		if (MASTER_SUBSPACE_COMMAND(obj_desc->field.base_byte_offset)) {
 
 			/* Perform the write */
 
Signature · 1 line
2.34.1
author maintainer
#160 lore raw

PATCH 156/188 ACPICA: Hardware: Do not flush CPU cache when entering S4 and S5

In reply to Sasha Levin

From: "Kirill A. Shutemov" <[email protected]>

[ Upstream commit 1d4e0b3abb168b2ee1eca99c527cffa1b80b6161 ]

ACPICA commit 3dd7e1f3996456ef81bfe14cba29860e8d42949e

According to ACPI 6.4, Section 16.2, the CPU cache flushing is required on entering to S1, S2, and S3, but the ACPICA code flushes the CPU cache regardless of the sleep state.

Blind cache flush on entering S5 causes problems for TDX.

Flushing happens with WBINVD that is not supported in the TDX environment.

TDX only supports S5 and adjusting ACPICA code to conform to the spec more strictly fixes the issue.

---
 drivers/acpi/acpica/hwesleep.c  | 4 +++-
 drivers/acpi/acpica/hwsleep.c   | 4 +++-
 drivers/acpi/acpica/hwxfsleep.c | 2 --
 3 files changed, 6 insertions(+), 4 deletions(-)
drivers/acpi/acpica/hwesleep.c +3 -1
index 808fdf54aeebf..7ee2939c08cd4 100644
@@ -104,7 +104,9 @@ acpi_status acpi_hw_extended_sleep(u8 sleep_state)
 
 	/* Flush caches, as per ACPI specification */
 
-	ACPI_FLUSH_CPU_CACHE();
+	if (sleep_state < ACPI_STATE_S4) {
+		ACPI_FLUSH_CPU_CACHE();
+	}
 
 	status = acpi_os_enter_sleep(sleep_state, sleep_control, 0);
 	if (status == AE_CTRL_TERMINATE) {
drivers/acpi/acpica/hwsleep.c +3 -1
index 34a3825f25d37..5efa3d8e483e0 100644
@@ -110,7 +110,9 @@ acpi_status acpi_hw_legacy_sleep(u8 sleep_state)
 
 	/* Flush caches, as per ACPI specification */
 
-	ACPI_FLUSH_CPU_CACHE();
+	if (sleep_state < ACPI_STATE_S4) {
+		ACPI_FLUSH_CPU_CACHE();
+	}
 
 	status = acpi_os_enter_sleep(sleep_state, pm1a_control, pm1b_control);
 	if (status == AE_CTRL_TERMINATE) {
drivers/acpi/acpica/hwxfsleep.c +0 -2
index e4cde23a29061..ba77598ee43e8 100644
@@ -162,8 +162,6 @@ acpi_status acpi_enter_sleep_state_s4bios(void)
 		return_ACPI_STATUS(status);
 	}
 
-	ACPI_FLUSH_CPU_CACHE();
-
 	status = acpi_hw_write_port(acpi_gbl_FADT.smi_command,
 				    (u32)acpi_gbl_FADT.s4_bios_request, 8);
 	if (ACPI_FAILURE(status)) {
Signature · 1 line
2.34.1
author maintainer
#161 lore raw

PATCH 157/188 mmc: mtk-sd: Use readl_poll_timeout instead of open-coded polling

In reply to Sasha Levin

From: AngeloGioacchino Del Regno <[email protected]>

[ Upstream commit ffaea6ebfe9ce06ebb3a54811a47688f2b0893cd ]

Replace all instances of open-coded while loops for polling registers with calls to readl_poll_timeout() and, while at it, also fix some possible infinite loop instances.

---
 drivers/mmc/host/mtk-sd.c | 64 ++++++++++++++++++++++++---------------
 1 file changed, 39 insertions(+), 25 deletions(-)
drivers/mmc/host/mtk-sd.c +39 -25
index 9e6dab7e34242..1ac92015992ed 100644
@@ -628,12 +628,11 @@ static void msdc_reset_hw(struct msdc_host *host)
 	u32 val;
 
 	sdr_set_bits(host->base + MSDC_CFG, MSDC_CFG_RST);
-	while (readl(host->base + MSDC_CFG) & MSDC_CFG_RST)
-		cpu_relax();
+	readl_poll_timeout(host->base + MSDC_CFG, val, !(val & MSDC_CFG_RST), 0, 0);
 
 	sdr_set_bits(host->base + MSDC_FIFOCS, MSDC_FIFOCS_CLR);
-	while (readl(host->base + MSDC_FIFOCS) & MSDC_FIFOCS_CLR)
-		cpu_relax();
+	readl_poll_timeout(host->base + MSDC_FIFOCS, val,
+			   !(val & MSDC_FIFOCS_CLR), 0, 0);
 
 	val = readl(host->base + MSDC_INT);
 	writel(val, host->base + MSDC_INT);
@@ -806,8 +805,9 @@ static void msdc_gate_clock(struct msdc_host *host)
 	clk_disable_unprepare(host->h_clk);
 }
 
-static void msdc_ungate_clock(struct msdc_host *host)
+static int msdc_ungate_clock(struct msdc_host *host)
 {
+	u32 val;
 	int ret;
 
 	clk_prepare_enable(host->h_clk);
@@ -817,11 +817,11 @@ static void msdc_ungate_clock(struct msdc_host *host)
 	ret = clk_bulk_prepare_enable(MSDC_NR_CLOCKS, host->bulk_clks);
 	if (ret) {
 		dev_err(host->dev, "Cannot enable pclk/axi/ahb clock gates\n");
-		return;
+		return ret;
 	}
 
-	while (!(readl(host->base + MSDC_CFG) & MSDC_CFG_CKSTB))
-		cpu_relax();
+	return readl_poll_timeout(host->base + MSDC_CFG, val,
+				  (val & MSDC_CFG_CKSTB), 1, 20000);
 }
 
 static void msdc_set_mclk(struct msdc_host *host, unsigned char timing, u32 hz)
@@ -832,6 +832,7 @@ static void msdc_set_mclk(struct msdc_host *host, unsigned char timing, u32 hz)
 	u32 div;
 	u32 sclk;
 	u32 tune_reg = host->dev_comp->pad_tune_reg;
+	u32 val;
 
 	if (!hz) {
 		dev_dbg(host->dev, "set mclk to 0\n");
@@ -912,8 +913,7 @@ static void msdc_set_mclk(struct msdc_host *host, unsigned char timing, u32 hz)
 	else
 		clk_prepare_enable(clk_get_parent(host->src_clk));
 
-	while (!(readl(host->base + MSDC_CFG) & MSDC_CFG_CKSTB))
-		cpu_relax();
+	readl_poll_timeout(host->base + MSDC_CFG, val, (val & MSDC_CFG_CKSTB), 0, 0);
 	sdr_set_bits(host->base + MSDC_CFG, MSDC_CFG_CKPDN);
 	mmc->actual_clock = sclk;
 	host->mclk = hz;
@@ -1223,13 +1223,13 @@ static bool msdc_cmd_done(struct msdc_host *host, int events,
 static inline bool msdc_cmd_is_ready(struct msdc_host *host,
 		struct mmc_request *mrq, struct mmc_command *cmd)
 {
-	/* The max busy time we can endure is 20ms */
-	unsigned long tmo = jiffies + msecs_to_jiffies(20);
+	u32 val;
+	int ret;
 
-	while ((readl(host->base + SDC_STS) & SDC_STS_CMDBUSY) &&
-			time_before(jiffies, tmo))
-		cpu_relax();
-	if (readl(host->base + SDC_STS) & SDC_STS_CMDBUSY) {
+	/* The max busy time we can endure is 20ms */
+	ret = readl_poll_timeout_atomic(host->base + SDC_STS, val,
+					!(val & SDC_STS_CMDBUSY), 1, 20000);
+	if (ret) {
 		dev_err(host->dev, "CMD bus busy detected\n");
 		host->error |= REQ_CMD_BUSY;
 		msdc_cmd_done(host, MSDC_INT_CMDTMO, mrq, cmd);
@@ -1237,12 +1237,10 @@ static inline bool msdc_cmd_is_ready(struct msdc_host *host,
 	}
 
 	if (mmc_resp_type(cmd) == MMC_RSP_R1B || cmd->data) {
-		tmo = jiffies + msecs_to_jiffies(20);
 		/* R1B or with data, should check SDCBUSY */
-		while ((readl(host->base + SDC_STS) & SDC_STS_SDCBUSY) &&
-				time_before(jiffies, tmo))
-			cpu_relax();
-		if (readl(host->base + SDC_STS) & SDC_STS_SDCBUSY) {
+		ret = readl_poll_timeout_atomic(host->base + SDC_STS, val,
+						!(val & SDC_STS_SDCBUSY), 1, 20000);
+		if (ret) {
 			dev_err(host->dev, "Controller busy detected\n");
 			host->error |= REQ_CMD_BUSY;
 			msdc_cmd_done(host, MSDC_INT_CMDTMO, mrq, cmd);
@@ -1367,6 +1365,8 @@ static bool msdc_data_xfer_done(struct msdc_host *host, u32 events,
 	    (MSDC_INT_XFER_COMPL | MSDC_INT_DATCRCERR | MSDC_INT_DATTMO
 	     | MSDC_INT_DMA_BDCSERR | MSDC_INT_DMA_GPDCSERR
 	     | MSDC_INT_DMA_PROTECT);
+	u32 val;
+	int ret;
 
 	spin_lock_irqsave(&host->lock, flags);
 	done = !host->data;
@@ -1383,8 +1383,14 @@ static bool msdc_data_xfer_done(struct msdc_host *host, u32 events,
 				readl(host->base + MSDC_DMA_CFG));
 		sdr_set_field(host->base + MSDC_DMA_CTRL, MSDC_DMA_CTRL_STOP,
 				1);
-		while (readl(host->base + MSDC_DMA_CFG) & MSDC_DMA_CFG_STS)
-			cpu_relax();
+
+		ret = readl_poll_timeout_atomic(host->base + MSDC_DMA_CFG, val,
+						!(val & MSDC_DMA_CFG_STS), 1, 20000);
+		if (ret) {
+			dev_dbg(host->dev, "DMA stop timed out\n");
+			return false;
+		}
+
 		sdr_clr_bits(host->base + MSDC_INTEN, data_ints_mask);
 		dev_dbg(host->dev, "DMA stop\n");
 
@@ -2598,7 +2604,11 @@ static int msdc_drv_probe(struct platform_device *pdev)
 	spin_lock_init(&host->lock);
 
 	platform_set_drvdata(pdev, mmc);
-	msdc_ungate_clock(host);
+	ret = msdc_ungate_clock(host);
+	if (ret) {
+		dev_err(&pdev->dev, "Cannot ungate clocks!\n");
+		goto release_mem;
+	}
 	msdc_init_hw(host);
 
 	if (mmc->caps2 & MMC_CAP2_CQE) {
@@ -2757,8 +2767,12 @@ static int __maybe_unused msdc_runtime_resume(struct device *dev)
 {
 	struct mmc_host *mmc = dev_get_drvdata(dev);
 	struct msdc_host *host = mmc_priv(mmc);
+	int ret;
+
+	ret = msdc_ungate_clock(host);
+	if (ret)
+		return ret;
 
-	msdc_ungate_clock(host);
 	msdc_restore_reg(host);
 	return 0;
 }
Signature · 1 line
2.34.1
author maintainer
#162 lore raw

PATCH 158/188 drm/amdgpu: Don't inherit GEM object VMAs in child process

In reply to Sasha Levin

From: Rajneesh Bhardwaj <[email protected]>

[ Upstream commit fbcdbfde87509d523132b59f661a355c731139d0 ]

When an application having open file access to a node forks, its shared mappings also get reflected in the address space of child process even though it cannot access them with the object permissions applied. With the existing permission checks on the gem objects, it might be reasonable to also create the VMAs with VM_DONTCOPY flag so a user space application doesn't need to explicitly call the madvise(addr, len, MADV_DONTFORK) system call to prevent the pages in the mapped range to appear in the address space of the child process. It also prevents the memory leaks due to additional reference counts on the mapped BOs in the child process that prevented freeing the memory in the parent for which we had worked around earlier in the user space inside the thunk library.

Additionally, we faced this issue when using CRIU to checkpoint restore an application that had such inherited mappings in the child which confuse CRIU when it mmaps on restore. Having this flag set for the render node VMAs helps. VMAs mapped via KFD already take care of this so this is needed only for the render nodes.

To limit the impact of the change to user space consumers such as OpenGL etc, limit it to KFD BOs only.

---
 drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c +3 -0
index a1e63ba4c54a5..630dc99e49086 100644
@@ -264,6 +264,9 @@ static int amdgpu_gem_object_mmap(struct drm_gem_object *obj, struct vm_area_str
 	    !(vma->vm_flags & (VM_READ | VM_WRITE | VM_EXEC)))
 		vma->vm_flags &= ~VM_MAYWRITE;
 
+	if (bo->kfd_bo)
+		vma->vm_flags |= VM_DONTCOPY;
+
 	return drm_gem_ttm_mmap(obj, vma);
 }
 
Signature · 1 line
2.34.1
author maintainer
#163 lore raw

PATCH 159/188 drm/amdgpu: fixup bad vram size on gmc v8

In reply to Sasha Levin

From: Zongmin Zhou <[email protected]>

[ Upstream commit 11544d77e3974924c5a9c8a8320b996a3e9b2f8b ]

Some boards(like RX550) seem to have garbage in the upper 16 bits of the vram size register. Check for this and clamp the size properly. Fixes
boards reporting bogus amounts of vram.

after add this patch,the maximum GPU VRAM size is 64GB, otherwise only 64GB vram size will be used.

---
 drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)
drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c +10 -3
index 492ebed2915be..63b890f1e8afb 100644
@@ -515,10 +515,10 @@ static void gmc_v8_0_mc_program(struct amdgpu_device *adev)
 static int gmc_v8_0_mc_init(struct amdgpu_device *adev)
 {
 	int r;
+	u32 tmp;
 
 	adev->gmc.vram_width = amdgpu_atombios_get_vram_width(adev);
 	if (!adev->gmc.vram_width) {
-		u32 tmp;
 		int chansize, numchan;
 
 		/* Get VRAM informations */
@@ -562,8 +562,15 @@ static int gmc_v8_0_mc_init(struct amdgpu_device *adev)
 		adev->gmc.vram_width = numchan * chansize;
 	}
 	/* size in MB on si */
-	adev->gmc.mc_vram_size = RREG32(mmCONFIG_MEMSIZE) * 1024ULL * 1024ULL;
-	adev->gmc.real_vram_size = RREG32(mmCONFIG_MEMSIZE) * 1024ULL * 1024ULL;
+	tmp = RREG32(mmCONFIG_MEMSIZE);
+	/* some boards may have garbage in the upper 16 bits */
+	if (tmp & 0xffff0000) {
+		DRM_INFO("Probable bad vram size: 0x%08x\n", tmp);
+		if (tmp & 0xffff)
+			tmp &= 0xffff;
+	}
+	adev->gmc.mc_vram_size = tmp * 1024ULL * 1024ULL;
+	adev->gmc.real_vram_size = adev->gmc.mc_vram_size;
 
 	if (!(adev->flags & AMD_IS_APU)) {
 		r = amdgpu_device_resize_fb_bar(adev);
Signature · 1 line
2.34.1
author maintainer
#164 lore raw

PATCH 160/188 mfd: intel_soc_pmic: Use CPU-id check instead of _HRV check to differentiate variants

In reply to Sasha Levin

From: Hans de Goede <[email protected]>

[ Upstream commit 5b78223f55a0f516a1639dbe11cd4324d4aaee20 ]

The Intel Crystal Cove PMIC has 2 different variants, one for use with Bay Trail (BYT) SoCs and one for use with Cherry Trail (CHT) SoCs.

So far we have been using an ACPI _HRV check to differentiate between the 2, but at least on the Microsoft Surface 3, which is a CHT device, the wrong _HRV value is reported by ACPI.

So instead switch to a CPU-ID check which prevents us from relying on the possibly wrong ACPI _HRV value.

---
 drivers/mfd/intel_soc_pmic_core.c | 28 +++-------------------------
 1 file changed, 3 insertions(+), 25 deletions(-)
drivers/mfd/intel_soc_pmic_core.c +3 -25
index ddd64f9e3341e..47cb7f00dfcfc 100644
@@ -14,15 +14,12 @@
 #include <linux/module.h>
 #include <linux/mfd/core.h>
 #include <linux/mfd/intel_soc_pmic.h>
+#include <linux/platform_data/x86/soc.h>
 #include <linux/pwm.h>
 #include <linux/regmap.h>
 
 #include "intel_soc_pmic_core.h"
 
-/* Crystal Cove PMIC shares same ACPI ID between different platforms */
-#define BYT_CRC_HRV		2
-#define CHT_CRC_HRV		3
-
 /* PWM consumed by the Intel GFX */
 static struct pwm_lookup crc_pwm_lookup[] = {
 	PWM_LOOKUP("crystal_cove_pwm", 0, "0000:00:02.0", "pwm_pmic_backlight", 0, PWM_POLARITY_NORMAL),
@@ -34,31 +31,12 @@ static int intel_soc_pmic_i2c_probe(struct i2c_client *i2c,
 	struct device *dev = &i2c->dev;
 	struct intel_soc_pmic_config *config;
 	struct intel_soc_pmic *pmic;
-	unsigned long long hrv;
-	acpi_status status;
 	int ret;
 
-	/*
-	 * There are 2 different Crystal Cove PMICs a Bay Trail and Cherry
-	 * Trail version, use _HRV to differentiate between the 2.
-	 */
-	status = acpi_evaluate_integer(ACPI_HANDLE(dev), "_HRV", NULL, &hrv);
-	if (ACPI_FAILURE(status)) {
-		dev_err(dev, "Failed to get PMIC hardware revision\n");
-		return -ENODEV;
-	}
-
-	switch (hrv) {
-	case BYT_CRC_HRV:
+	if (soc_intel_is_byt())
 		config = &intel_soc_pmic_config_byt_crc;
-		break;
-	case CHT_CRC_HRV:
+	else
 		config = &intel_soc_pmic_config_cht_crc;
-		break;
-	default:
-		dev_warn(dev, "Unknown hardware rev %llu, assuming BYT\n", hrv);
-		config = &intel_soc_pmic_config_byt_crc;
-	}
 
 	pmic = devm_kzalloc(dev, sizeof(*pmic), GFP_KERNEL);
 	if (!pmic)
Signature · 1 line
2.34.1
author maintainer
#165 lore raw

PATCH 161/188 amdgpu/pm: Make sysfs pm attributes as read-only for VFs

In reply to Sasha Levin

From: Marina Nikolic <[email protected]>

[ Upstream commit 11c9cc95f818f0f187e9b579a7f136f532b42445 ]

== Description ==
Setting values of pm attributes through sysfs should not be allowed in SRIOV mode.
These calls will not be processed by FW anyway, but error handling on sysfs level should be improved.

== Changes ==
This patch prohibits performing of all set commands in SRIOV mode on sysfs level.
It offers better error handling as calls that are not allowed will not be propagated further.

== Test ==
Writing to any sysfs file in passthrough mode will succeed. Writing to any sysfs file in ONEVF mode will yield error:
"calling process does not have sufficient permission to execute a command".

---
 drivers/gpu/drm/amd/pm/amdgpu_pm.c | 6 ++++++
 1 file changed, 6 insertions(+)
drivers/gpu/drm/amd/pm/amdgpu_pm.c +6 -0
index 249cb0aeb5ae4..32a0fd5e84b73 100644
@@ -2117,6 +2117,12 @@ static int default_attr_update(struct amdgpu_device *adev, struct amdgpu_device_
 		}
 	}
 
+	/* setting should not be allowed from VF */
+	if (amdgpu_sriov_vf(adev)) {
+		dev_attr->attr.mode &= ~S_IWUGO;
+		dev_attr->store = NULL;
+	}
+
 #undef DEVICE_ATTR_IS
 
 	return 0;
Signature · 1 line
2.34.1
author maintainer
#166 lore raw

PATCH 162/188 ACPI: battery: Add the ThinkPad "Not Charging" quirk

In reply to Sasha Levin

From: Thomas Weißschuh <[email protected]>

[ Upstream commit e96c1197aca628f7d2480a1cc3214912b40b3414 ]

The EC/ACPI firmware on Lenovo ThinkPads used to report a status of "Unknown" when the battery is between the charge start and charge stop thresholds. On Windows, it reports "Not Charging" so the quirk has been added to also report correctly.

Now the "status" attribute returns "Not Charging" when the battery on ThinkPads is not physicaly charging.

---
 drivers/acpi/battery.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)
drivers/acpi/battery.c +22 -0
index 8afa85d6eb6a7..ead0114f27c9f 100644
@@ -53,6 +53,7 @@ static int battery_bix_broken_package;
 static int battery_notification_delay_ms;
 static int battery_ac_is_broken;
 static int battery_check_pmic = 1;
+static int battery_quirk_notcharging;
 static unsigned int cache_time = 1000;
 module_param(cache_time, uint, 0644);
 MODULE_PARM_DESC(cache_time, "cache time in milliseconds");
@@ -217,6 +218,8 @@ static int acpi_battery_get_property(struct power_supply *psy,
 			val->intval = POWER_SUPPLY_STATUS_CHARGING;
 		else if (acpi_battery_is_charged(battery))
 			val->intval = POWER_SUPPLY_STATUS_FULL;
+		else if (battery_quirk_notcharging)
+			val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
 		else
 			val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
 		break;
@@ -1111,6 +1114,12 @@ battery_do_not_check_pmic_quirk(const struct dmi_system_id *d)
 	return 0;
 }
 
+static int __init battery_quirk_not_charging(const struct dmi_system_id *d)
+{
+	battery_quirk_notcharging = 1;
+	return 0;
+}
+
 static const struct dmi_system_id bat_dmi_table[] __initconst = {
 	{
 		/* NEC LZ750/LS */
@@ -1155,6 +1164,19 @@ static const struct dmi_system_id bat_dmi_table[] __initconst = {
 			DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo MIIX 320-10ICR"),
 		},
 	},
+	{
+		/*
+		 * On Lenovo ThinkPads the BIOS specification defines
+		 * a state when the bits for charging and discharging
+		 * are both set to 0. That state is "Not Charging".
+		 */
+		.callback = battery_quirk_not_charging,
+		.ident = "Lenovo ThinkPad",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad"),
+		},
+	},
 	{},
 };
 
Signature · 1 line
2.34.1
author maintainer
#167 lore raw

PATCH 163/188 ACPI: CPPC: Check present CPUs for determining _CPC is valid

In reply to Sasha Levin

From: Mario Limonciello <[email protected]>

[ Upstream commit 2aeca6bd02776d7f56a49a32be0dd184f204d888 ]

As this is a static check, it should be based upon what is currently present on the system. This makes probeing more deterministic.

While local APIC flags field (lapic_flags) of cpu core in MADT table is 0, then the cpu core won't be enabled. In this case, _CPC won't be found in this core, and return back to _CPC invalid with walking through possible cpus (include disable cpus). This is not expected, so switch to check present CPUs instead.

---
 drivers/acpi/cppc_acpi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/acpi/cppc_acpi.c +1 -1
index 3fbb17ecce2d5..6fe28a2d387bd 100644
@@ -411,7 +411,7 @@ bool acpi_cpc_valid(void)
 	struct cpc_desc *cpc_ptr;
 	int cpu;
 
-	for_each_possible_cpu(cpu) {
+	for_each_present_cpu(cpu) {
 		cpc_ptr = per_cpu(cpc_desc_ptr, cpu);
 		if (!cpc_ptr)
 			return false;
Signature · 1 line
2.34.1
author maintainer
#168 lore raw

PATCH 164/188 btrfs: remove BUG_ON() in find_parent_nodes()

In reply to Sasha Levin

From: Josef Bacik <[email protected]>

[ Upstream commit fcba0120edf88328524a4878d1d6f4ad39f2ec81 ]

We search for an extent entry with .offset = -1, which shouldn't be a thing, but corruption happens. Add an ASSERT() for the developers, return -EUCLEAN for mortals.

---
 fs/btrfs/backref.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
fs/btrfs/backref.c +6 -1
index f735b8798ba12..6b4b0f105a572 100644
@@ -1214,7 +1214,12 @@ static int find_parent_nodes(struct btrfs_trans_handle *trans,
 	ret = btrfs_search_slot(NULL, fs_info->extent_root, &key, path, 0, 0);
 	if (ret < 0)
 		goto out;
-	BUG_ON(ret == 0);
+	if (ret == 0) {
+		/* This shouldn't happen, indicates a bug or fs corruption. */
+		ASSERT(ret != 0);
+		ret = -EUCLEAN;
+		goto out;
+	}
 
 #ifdef CONFIG_BTRFS_FS_RUN_SANITY_TESTS
 	if (trans && likely(trans->type != __TRANS_DUMMY) &&
Signature · 1 line
2.34.1
author maintainer
#169 lore raw

PATCH 165/188 btrfs: remove BUG_ON(!eie) in find_parent_nodes

In reply to Sasha Levin

From: Josef Bacik <[email protected]>

[ Upstream commit 9f05c09d6baef789726346397438cca4ec43c3ee ]

If we're looking for leafs that point to a data extent we want to record the extent items that point at our bytenr. At this point we have the reference and we know for a fact that this leaf should have a reference to our bytenr. However if there's some sort of corruption we may not find any references to our leaf, and thus could end up with eie == NULL. Replace this BUG_ON() with an ASSERT() and then return -EUCLEAN for the mortals.

---
 fs/btrfs/backref.c | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)
fs/btrfs/backref.c +11 -3
index 6b4b0f105a572..8b090c40daf77 100644
@@ -1365,10 +1365,18 @@ static int find_parent_nodes(struct btrfs_trans_handle *trans,
 				goto out;
 			if (!ret && extent_item_pos) {
 				/*
-				 * we've recorded that parent, so we must extend
-				 * its inode list here
+				 * We've recorded that parent, so we must extend
+				 * its inode list here.
+				 *
+				 * However if there was corruption we may not
+				 * have found an eie, return an error in this
+				 * case.
 				 */
-				BUG_ON(!eie);
+				ASSERT(eie);
+				if (!eie) {
+					ret = -EUCLEAN;
+					goto out;
+				}
 				while (eie->next)
 					eie = eie->next;
 				eie->next = ref->inode_list;
Signature · 1 line
2.34.1
author maintainer
#170 lore raw

PATCH 166/188 net: mdio: Demote probed message to debug print

In reply to Sasha Levin

From: Florian Fainelli <[email protected]>

[ Upstream commit 7590fc6f80ac2cbf23e6b42b668bbeded070850b ]

On systems with large numbers of MDIO bus/muxes the message indicating that a given MDIO bus has been successfully probed is repeated for as many buses we have, which can eat up substantial boot time for no reason, demote to a debug print.

---
 drivers/net/phy/mdio_bus.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/phy/mdio_bus.c +1 -1
index 6865d9319197f..8dc6e6269c65e 100644
@@ -591,7 +591,7 @@ int __mdiobus_register(struct mii_bus *bus, struct module *owner)
 	mdiobus_setup_mdiodev_from_board_info(bus, mdiobus_create_device);
 
 	bus->state = MDIOBUS_REGISTERED;
-	pr_info("%s: probed\n", bus->name);
+	dev_dbg(&bus->dev, "probed\n");
 	return 0;
 
 error:
Signature · 1 line
2.34.1
author maintainer
#171 lore raw

PATCH 167/188 mac80211: allow non-standard VHT MCS-10/11

In reply to Sasha Levin

From: Ping-Ke Shih <[email protected]>

[ Upstream commit 04be6d337d37400ad5b3d5f27ca87645ee5a18a3 ]

Some AP can possibly try non-standard VHT rate and mac80211 warns and drops packets, and leads low TCP throughput.

Rate marked as a VHT rate but data is invalid: MCS: 10, NSS: 2
WARNING: CPU: 1 PID: 7817 at net/mac80211/rx.c:4856 ieee80211_rx_list+0x223/0x2f0 [mac8021

Since commit c27aa56a72b8 ("cfg80211: add VHT rate entries for MCS-10 and MCS-11") has added, mac80211 adds this support as well.

After this patch, throughput is good and iw can get the bitrate:
rx bitrate: 975.1 MBit/s VHT-MCS 10 80MHz short GI VHT-NSS 2
or

    rx bitrate:	1083.3 MBit/s VHT-MCS 11 80MHz short GI VHT-NSS 2
---
 net/mac80211/rx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/mac80211/rx.c +1 -1
index 1958e4d59b524..92ce173dd0c13 100644
@@ -4933,7 +4933,7 @@ void ieee80211_rx_list(struct ieee80211_hw *hw, struct ieee80211_sta *pubsta,
 				goto drop;
 			break;
 		case RX_ENC_VHT:
-			if (WARN_ONCE(status->rate_idx > 9 ||
+			if (WARN_ONCE(status->rate_idx > 11 ||
 				      !status->nss ||
 				      status->nss > 8,
 				      "Rate marked as a VHT rate but data is invalid: MCS: %d, NSS: %d\n",
Signature · 1 line
2.34.1
author maintainer
#172 lore raw

PATCH 168/188 dm btree: add a defensive bounds check to insert_at()

In reply to Sasha Levin

From: Joe Thornber <[email protected]>

[ Upstream commit 85bca3c05b6cca31625437eedf2060e846c4bbad ]

Corrupt metadata could trigger an out of bounds write.

---
 drivers/md/persistent-data/dm-btree.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)
drivers/md/persistent-data/dm-btree.c +5 -3
index 0703ca7a7d9a4..5ce64e93aae74 100644
@@ -81,14 +81,16 @@ void inc_children(struct dm_transaction_manager *tm, struct btree_node *n,
 }
 
 static int insert_at(size_t value_size, struct btree_node *node, unsigned index,
-		      uint64_t key, void *value)
-		      __dm_written_to_disk(value)
+		     uint64_t key, void *value)
+	__dm_written_to_disk(value)
 {
 	uint32_t nr_entries = le32_to_cpu(node->header.nr_entries);
+	uint32_t max_entries = le32_to_cpu(node->header.max_entries);
 	__le64 key_le = cpu_to_le64(key);
 
 	if (index > nr_entries ||
-	    index >= le32_to_cpu(node->header.max_entries)) {
+	    index >= max_entries ||
+	    nr_entries >= max_entries) {
 		DMERR("too many entries in btree node for insert");
 		__dm_unbless_for_disk(value);
 		return -ENOMEM;
Signature · 7 lines
2.34.1


--
dm-devel mailing list
[email protected]
https://listman.redhat.com/mailman/listinfo/dm-devel
author maintainer
#173 lore raw

PATCH 169/188 dm space map common: add bounds check to sm_ll_lookup_bitmap()

In reply to Sasha Levin

From: Joe Thornber <[email protected]>

[ Upstream commit cba23ac158db7f3cd48a923d6861bee2eb7a2978 ]

Corrupted metadata could warrant returning error from sm_ll_lookup_bitmap().

---
 drivers/md/persistent-data/dm-space-map-common.c | 5 +++++
 1 file changed, 5 insertions(+)
drivers/md/persistent-data/dm-space-map-common.c +5 -0
index 4a6a2a9b4eb49..bfbfa750e0160 100644
@@ -283,6 +283,11 @@ int sm_ll_lookup_bitmap(struct ll_disk *ll, dm_block_t b, uint32_t *result)
 	struct disk_index_entry ie_disk;
 	struct dm_block *blk;
 
+	if (b >= ll->nr_blocks) {
+		DMERR_LIMIT("metadata block out of bounds");
+		return -EINVAL;
+	}
+
 	b = do_div(index, ll->entries_per_block);
 	r = ll->load_ie(ll, index, &ie_disk);
 	if (r < 0)
Signature · 7 lines
2.34.1


--
dm-devel mailing list
[email protected]
https://listman.redhat.com/mailman/listinfo/dm-devel
author maintainer
#174 lore raw

PATCH 170/188 bpf/selftests: Fix namespace mount setup in tc_redirect

In reply to Sasha Levin

From: Jiri Olsa <[email protected]>

[ Upstream commit 5e22dd18626726028a93ff1350a8a71a00fd843d ]

The tc_redirect umounts /sys in the new namespace, which can be mounted as shared and cause global umount. The lazy umount also takes down mounted trees under /sys like debugfs, which won't be available after sysfs mounts again and could cause fails in other tests.

  # cat /proc/self/mountinfo | grep debugfs
  34 23 0:7 / /sys/kernel/debug rw,nosuid,nodev,noexec,relatime shared:14 - debugfs debugfs rw
  # cat /proc/self/mountinfo | grep sysfs
  23 86 0:22 / /sys rw,nosuid,nodev,noexec,relatime shared:2 - sysfs sysfs rw
  # mount | grep debugfs
  debugfs on /sys/kernel/debug type debugfs (rw,nosuid,nodev,noexec,relatime)
  # ./test_progs -t tc_redirect
  #164 tc_redirect:OK
  Summary: 1/4 PASSED, 0 SKIPPED, 0 FAILED
  # mount | grep debugfs
  # cat /proc/self/mountinfo | grep debugfs
  # cat /proc/self/mountinfo | grep sysfs
  25 86 0:22 / /sys rw,relatime shared:2 - sysfs sysfs rw

Making the sysfs private under the new namespace so the umount won't trigger the global sysfs umount.

---
 tools/testing/selftests/bpf/prog_tests/tc_redirect.c | 7 +++++++
 1 file changed, 7 insertions(+)
tools/testing/selftests/bpf/prog_tests/tc_redirect.c +7 -0
index e7201ba29ccd6..47e3159729d21 100644
@@ -105,6 +105,13 @@ static int setns_by_fd(int nsfd)
 	if (!ASSERT_OK(err, "unshare"))
 		return err;
 
+	/* Make our /sys mount private, so the following umount won't
+	 * trigger the global umount in case it's shared.
+	 */
+	err = mount("none", "/sys", NULL, MS_PRIVATE, NULL);
+	if (!ASSERT_OK(err, "remount private /sys"))
+		return err;
+
 	err = umount2("/sys", MNT_DETACH);
 	if (!ASSERT_OK(err, "umount2 /sys"))
 		return err;
Signature · 1 line
2.34.1
author maintainer
#175 lore raw

PATCH 171/188 mlxsw: pci: Avoid flow control for EMAD packets

In reply to Sasha Levin

From: Danielle Ratson <[email protected]>

[ Upstream commit d43e4271747ace01a27a49a97a397cb4219f6487 ]

Locally generated packets ingress the device through its CPU port. When the CPU port is congested and there are not enough credits in its headroom buffer, packets can be dropped.

While this might be acceptable for data packets that traverse the network, configuration packets exchanged between the host and the device (EMADs) should not be subjected to this flow control.

The "sdq_lp" bit in the SDQ (Send Descriptor Queue) context allows the host to instruct the device to treat packets sent on this queue as "local processing" and always process them, regardless of the state of the CPU port's headroom.

Add the definition of this bit and set it for the dedicated SDQ reserved for the transmission of EMAD packets. This makes the "local processing" bit in the WQE (Work Queue Element) redundant, so clear it.

---
 drivers/net/ethernet/mellanox/mlxsw/cmd.h | 12 ++++++++++++
 drivers/net/ethernet/mellanox/mlxsw/pci.c |  6 +++++-
 2 files changed, 17 insertions(+), 1 deletion(-)
drivers/net/ethernet/mellanox/mlxsw/cmd.h +12 -0
index 392ce3cb27f72..51b260d54237e 100644
@@ -935,6 +935,18 @@ static inline int mlxsw_cmd_sw2hw_rdq(struct mlxsw_core *mlxsw_core,
  */
 MLXSW_ITEM32(cmd_mbox, sw2hw_dq, cq, 0x00, 24, 8);
 
+enum mlxsw_cmd_mbox_sw2hw_dq_sdq_lp {
+	MLXSW_CMD_MBOX_SW2HW_DQ_SDQ_LP_WQE,
+	MLXSW_CMD_MBOX_SW2HW_DQ_SDQ_LP_IGNORE_WQE,
+};
+
+/* cmd_mbox_sw2hw_dq_sdq_lp
+ * SDQ local Processing
+ * 0: local processing by wqe.lp
+ * 1: local processing (ignoring wqe.lp)
+ */
+MLXSW_ITEM32(cmd_mbox, sw2hw_dq, sdq_lp, 0x00, 23, 1);
+
 /* cmd_mbox_sw2hw_dq_sdq_tclass
  * SDQ: CPU Egress TClass
  * RDQ: Reserved
drivers/net/ethernet/mellanox/mlxsw/pci.c +5 -1
index 01c3235ab2bdf..d9f9cbba62465 100644
@@ -285,6 +285,7 @@ static int mlxsw_pci_sdq_init(struct mlxsw_pci *mlxsw_pci, char *mbox,
 			      struct mlxsw_pci_queue *q)
 {
 	int tclass;
+	int lp;
 	int i;
 	int err;
 
@@ -292,9 +293,12 @@ static int mlxsw_pci_sdq_init(struct mlxsw_pci *mlxsw_pci, char *mbox,
 	q->consumer_counter = 0;
 	tclass = q->num == MLXSW_PCI_SDQ_EMAD_INDEX ? MLXSW_PCI_SDQ_EMAD_TC :
 						      MLXSW_PCI_SDQ_CTL_TC;
+	lp = q->num == MLXSW_PCI_SDQ_EMAD_INDEX ? MLXSW_CMD_MBOX_SW2HW_DQ_SDQ_LP_IGNORE_WQE :
+						  MLXSW_CMD_MBOX_SW2HW_DQ_SDQ_LP_WQE;
 
 	/* Set CQ of same number of this SDQ. */
 	mlxsw_cmd_mbox_sw2hw_dq_cq_set(mbox, q->num);
+	mlxsw_cmd_mbox_sw2hw_dq_sdq_lp_set(mbox, lp);
 	mlxsw_cmd_mbox_sw2hw_dq_sdq_tclass_set(mbox, tclass);
 	mlxsw_cmd_mbox_sw2hw_dq_log2_dq_sz_set(mbox, 3); /* 8 pages */
 	for (i = 0; i < MLXSW_PCI_AQ_PAGES; i++) {
@@ -1678,7 +1682,7 @@ static int mlxsw_pci_skb_transmit(void *bus_priv, struct sk_buff *skb,
 
 	wqe = elem_info->elem;
 	mlxsw_pci_wqe_c_set(wqe, 1); /* always report completion */
-	mlxsw_pci_wqe_lp_set(wqe, !!tx_info->is_emad);
+	mlxsw_pci_wqe_lp_set(wqe, 0);
 	mlxsw_pci_wqe_type_set(wqe, MLXSW_PCI_WQE_TYPE_ETHERNET);
 
 	err = mlxsw_pci_wqe_frag_map(mlxsw_pci, wqe, 0, skb->data,
Signature · 1 line
2.34.1
author maintainer
#176 lore raw

PATCH 172/188 net: phy: marvell: configure RGMII delays for 88E1118

In reply to Sasha Levin

From: "Russell King (Oracle)" <[email protected]>

[ Upstream commit f22725c95ececb703c3f741e8f946d23705630b7 ]

Corentin Labbe reports that the SSI 1328 does not work when allowing the PHY to operate at gigabit speeds, but does work with the generic PHY driver.

This appears to be because m88e1118_config_init() writes a fixed value to the MSCR register, claiming that this is to enable 1G speeds. However, this always sets bits 4 and 5, enabling RGMII transmit and receive delays. The suspicion is that the original board this was added for required the delays to make 1G speeds work.

Add the necessary configuration for RGMII delays for the 88E1118 to bring this into line with the requirements for RGMII support, and thus make the SSI 1328 work.

Corentin Labbe has tested this on gemini-ssi1328 and gemini-ns2502.

---
 drivers/net/phy/marvell.c | 6 ++++++
 1 file changed, 6 insertions(+)
drivers/net/phy/marvell.c +6 -0
index 4fcfca4e17021..b02491f7dd957 100644
@@ -1242,6 +1242,12 @@ static int m88e1118_config_init(struct phy_device *phydev)
 	if (err < 0)
 		return err;
 
+	if (phy_interface_is_rgmii(phydev)) {
+		err = m88e1121_config_aneg_rgmii_delays(phydev);
+		if (err < 0)
+			return err;
+	}
+
 	/* Adjust LED Control */
 	if (phydev->dev_flags & MARVELL_PHY_M1118_DNS323_LEDS)
 		err = phy_write(phydev, 0x10, 0x1100);
Signature · 1 line
2.34.1
author maintainer
#177 lore raw

PATCH 173/188 net: gemini: allow any RGMII interface mode

In reply to Sasha Levin

From: "Russell King (Oracle)" <[email protected]>

[ Upstream commit 4e4f325a0a55907b14f579e6b1a38c53755e3de2 ]

The four RGMII interface modes take care of the required RGMII delay configuration at the PHY and should not be limited by the network MAC driver. Sadly, gemini was only permitting RGMII mode with no delays, which would require the required delay to be inserted via PCB tracking or by the MAC.

However, there are designs that require the PHY to add the delay, which is impossible without Gemini permitting the other three PHY interface modes. Fix the driver to allow these.

---
 drivers/net/ethernet/cortina/gemini.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)
drivers/net/ethernet/cortina/gemini.c +6 -3
index 6e745ca4c4333..012ca11a38cc1 100644
@@ -305,21 +305,21 @@ static void gmac_speed_set(struct net_device *netdev)
 	switch (phydev->speed) {
 	case 1000:
 		status.bits.speed = GMAC_SPEED_1000;
-		if (phydev->interface == PHY_INTERFACE_MODE_RGMII)
+		if (phy_interface_mode_is_rgmii(phydev->interface))
 			status.bits.mii_rmii = GMAC_PHY_RGMII_1000;
 		netdev_dbg(netdev, "connect %s to RGMII @ 1Gbit\n",
 			   phydev_name(phydev));
 		break;
 	case 100:
 		status.bits.speed = GMAC_SPEED_100;
-		if (phydev->interface == PHY_INTERFACE_MODE_RGMII)
+		if (phy_interface_mode_is_rgmii(phydev->interface))
 			status.bits.mii_rmii = GMAC_PHY_RGMII_100_10;
 		netdev_dbg(netdev, "connect %s to RGMII @ 100 Mbit\n",
 			   phydev_name(phydev));
 		break;
 	case 10:
 		status.bits.speed = GMAC_SPEED_10;
-		if (phydev->interface == PHY_INTERFACE_MODE_RGMII)
+		if (phy_interface_mode_is_rgmii(phydev->interface))
 			status.bits.mii_rmii = GMAC_PHY_RGMII_100_10;
 		netdev_dbg(netdev, "connect %s to RGMII @ 10 Mbit\n",
 			   phydev_name(phydev));
@@ -389,6 +389,9 @@ static int gmac_setup_phy(struct net_device *netdev)
 		status.bits.mii_rmii = GMAC_PHY_GMII;
 		break;
 	case PHY_INTERFACE_MODE_RGMII:
+	case PHY_INTERFACE_MODE_RGMII_ID:
+	case PHY_INTERFACE_MODE_RGMII_TXID:
+	case PHY_INTERFACE_MODE_RGMII_RXID:
 		netdev_dbg(netdev,
 			   "RGMII: set GMAC0 and GMAC1 to MII/RGMII mode\n");
 		status.bits.mii_rmii = GMAC_PHY_RGMII_100_10;
Signature · 1 line
2.34.1
author maintainer
#178 lore raw

PATCH 174/188 net: dsa: hold rtnl_mutex when calling dsa_master_{setup,teardown}

In reply to Sasha Levin

From: Vladimir Oltean <[email protected]>

[ Upstream commit c146f9bc195a9dc3ad7fd000a14540e7c9df952d ]

DSA needs to simulate master tracking events when a binding is first with a DSA master established and torn down, in order to give drivers the simplifying guarantee that ->master_state_change calls are made only when the master's readiness state to pass traffic changes. master_state_change() provide a operational bool that DSA driver can use to understand if DSA master is operational or not.
To avoid races, we need to block the reception of NETDEV_UP/NETDEV_CHANGE/NETDEV_GOING_DOWN events in the netdev notifier chain while we are changing the master's dev->dsa_ptr (this changes what netdev_uses_dsa(dev) reports).

The dsa_master_setup() and dsa_master_teardown() functions optionally require the rtnl_mutex to be held, if the tagger needs the master to be promiscuous, these functions call dev_set_promiscuity(). Move the rtnl_lock() from that function and make it top-level.

---
 net/dsa/dsa2.c   | 8 ++++++++
 net/dsa/master.c | 4 ++--
 2 files changed, 10 insertions(+), 2 deletions(-)
net/dsa/dsa2.c +8 -0
index e9911b18bdbfa..db9cdfb190fc0 100644
@@ -1011,6 +1011,8 @@ static int dsa_tree_setup_master(struct dsa_switch_tree *dst)
 	struct dsa_port *dp;
 	int err;
 
+	rtnl_lock();
+
 	list_for_each_entry(dp, &dst->ports, list) {
 		if (dsa_port_is_cpu(dp)) {
 			err = dsa_master_setup(dp->master, dp);
@@ -1019,6 +1021,8 @@ static int dsa_tree_setup_master(struct dsa_switch_tree *dst)
 		}
 	}
 
+	rtnl_unlock();
+
 	return 0;
 }
 
@@ -1026,9 +1030,13 @@ static void dsa_tree_teardown_master(struct dsa_switch_tree *dst)
 {
 	struct dsa_port *dp;
 
+	rtnl_lock();
+
 	list_for_each_entry(dp, &dst->ports, list)
 		if (dsa_port_is_cpu(dp))
 			dsa_master_teardown(dp->master);
+
+	rtnl_unlock();
 }
 
 static int dsa_tree_setup_lags(struct dsa_switch_tree *dst)
net/dsa/master.c +2 -2
index e8e19857621bd..16b7dfd22bf5d 100644
@@ -267,9 +267,9 @@ static void dsa_master_set_promiscuity(struct net_device *dev, int inc)
 	if (!ops->promisc_on_master)
 		return;
 
-	rtnl_lock();
+	ASSERT_RTNL();
+
 	dev_set_promiscuity(dev, inc);
-	rtnl_unlock();
 }
 
 static ssize_t tagging_show(struct device *d, struct device_attribute *attr,
Signature · 1 line
2.34.1
author maintainer
#179 lore raw

PATCH 175/188 regulator: qcom_smd: Align probe function with rpmh-regulator

In reply to Sasha Levin

From: Konrad Dybcio <[email protected]>

[ Upstream commit 14e2976fbabdacb01335d7f91eeebbc89c67ddb1 ]

The RPMh regulator driver is much newer and gets more attention, which in consequence makes it do a few things better. Update qcom_smd-regulator's probe function to mimic what rpmh-regulator does to address a couple of issues:

- Probe defer now works correctly, before it used to, well, kinda just die.. This fixes reliable probing on (at least) PM8994, because Linux apparently cannot deal with supply map dependencies yet..

- Regulator data is now matched more sanely: regulator data is matched against each individual regulator node name and throwing an -EINVAL if data is missing, instead of just assuming everything is fine and iterating over all subsequent array members.

- status = "disabled" will now work for disabling individual regulators in DT. Previously it didn't seem to do much if anything at all.

---
 drivers/regulator/qcom_smd-regulator.c | 100 +++++++++++++++++--------
 1 file changed, 70 insertions(+), 30 deletions(-)
drivers/regulator/qcom_smd-regulator.c +70 -30
index 198fcc6551f6d..8e077792bddd9 100644
@@ -9,6 +9,7 @@
 #include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/driver.h>
+#include <linux/regulator/of_regulator.h>
 #include <linux/soc/qcom/smd-rpm.h>
 
 struct qcom_rpm_reg {
@@ -1190,52 +1191,91 @@ static const struct of_device_id rpm_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, rpm_of_match);
 
-static int rpm_reg_probe(struct platform_device *pdev)
+/**
+ * rpm_regulator_init_vreg() - initialize all attributes of a qcom_smd-regulator
+ * @vreg:		Pointer to the individual qcom_smd-regulator resource
+ * @dev:		Pointer to the top level qcom_smd-regulator PMIC device
+ * @node:		Pointer to the individual qcom_smd-regulator resource
+ *			device node
+ * @rpm:		Pointer to the rpm bus node
+ * @pmic_rpm_data:	Pointer to a null-terminated array of qcom_smd-regulator
+ *			resources defined for the top level PMIC device
+ *
+ * Return: 0 on success, errno on failure
+ */
+static int rpm_regulator_init_vreg(struct qcom_rpm_reg *vreg, struct device *dev,
+				   struct device_node *node, struct qcom_smd_rpm *rpm,
+				   const struct rpm_regulator_data *pmic_rpm_data)
 {
-	const struct rpm_regulator_data *reg;
-	const struct of_device_id *match;
-	struct regulator_config config = { };
+	struct regulator_config config = {};
+	const struct rpm_regulator_data *rpm_data;
 	struct regulator_dev *rdev;
+	int ret;
+
+	for (rpm_data = pmic_rpm_data; rpm_data->name; rpm_data++)
+		if (of_node_name_eq(node, rpm_data->name))
+			break;
+
+	if (!rpm_data->name) {
+		dev_err(dev, "Unknown regulator %pOFn\n", node);
+		return -EINVAL;
+	}
+
+	vreg->dev	= dev;
+	vreg->rpm	= rpm;
+	vreg->type	= rpm_data->type;
+	vreg->id	= rpm_data->id;
+
+	memcpy(&vreg->desc, rpm_data->desc, sizeof(vreg->desc));
+	vreg->desc.name = rpm_data->name;
+	vreg->desc.supply_name = rpm_data->supply;
+	vreg->desc.owner = THIS_MODULE;
+	vreg->desc.type = REGULATOR_VOLTAGE;
+	vreg->desc.of_match = rpm_data->name;
+
+	config.dev		= dev;
+	config.of_node		= node;
+	config.driver_data	= vreg;
+
+	rdev = devm_regulator_register(dev, &vreg->desc, &config);
+	if (IS_ERR(rdev)) {
+		ret = PTR_ERR(rdev);
+		dev_err(dev, "%pOFn: devm_regulator_register() failed, ret=%d\n", node, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int rpm_reg_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	const struct rpm_regulator_data *vreg_data;
+	struct device_node *node;
 	struct qcom_rpm_reg *vreg;
 	struct qcom_smd_rpm *rpm;
+	int ret;
 
 	rpm = dev_get_drvdata(pdev->dev.parent);
 	if (!rpm) {
-		dev_err(&pdev->dev, "unable to retrieve handle to rpm\n");
+		dev_err(&pdev->dev, "Unable to retrieve handle to rpm\n");
 		return -ENODEV;
 	}
 
-	match = of_match_device(rpm_of_match, &pdev->dev);
-	if (!match) {
-		dev_err(&pdev->dev, "failed to match device\n");
+	vreg_data = of_device_get_match_data(dev);
+	if (!vreg_data)
 		return -ENODEV;
-	}
 
-	for (reg = match->data; reg->name; reg++) {
+	for_each_available_child_of_node(dev->of_node, node) {
 		vreg = devm_kzalloc(&pdev->dev, sizeof(*vreg), GFP_KERNEL);
 		if (!vreg)
 			return -ENOMEM;
 
-		vreg->dev = &pdev->dev;
-		vreg->type = reg->type;
-		vreg->id = reg->id;
-		vreg->rpm = rpm;
-
-		memcpy(&vreg->desc, reg->desc, sizeof(vreg->desc));
-
-		vreg->desc.id = -1;
-		vreg->desc.owner = THIS_MODULE;
-		vreg->desc.type = REGULATOR_VOLTAGE;
-		vreg->desc.name = reg->name;
-		vreg->desc.supply_name = reg->supply;
-		vreg->desc.of_match = reg->name;
-
-		config.dev = &pdev->dev;
-		config.driver_data = vreg;
-		rdev = devm_regulator_register(&pdev->dev, &vreg->desc, &config);
-		if (IS_ERR(rdev)) {
-			dev_err(&pdev->dev, "failed to register %s\n", reg->name);
-			return PTR_ERR(rdev);
+		ret = rpm_regulator_init_vreg(vreg, dev, node, rpm, vreg_data);
+
+		if (ret < 0) {
+			of_node_put(node);
+			return ret;
 		}
 	}
 
Signature · 1 line
2.34.1
author maintainer
#180 lore raw

PATCH 176/188 serial: pl010: Drop CR register reset on set_termios

In reply to Sasha Levin

From: Lukas Wunner <[email protected]>

[ Upstream commit 08a0c6dff91c965e39905cf200d22db989203ccb ]

pl010_set_termios() briefly resets the CR register to zero.

Where does this register write come from?

The PL010 driver's IRQ handler ambauart_int() originally modified the CR register without holding the port spinlock. ambauart_set_termios() also modified that register. To prevent concurrent read-modify-writes by the IRQ handler and to prevent transmission while changing baudrate, ambauart_set_termios() had to disable interrupts. That is achieved by writing zero to the CR register.

However in 2004 the PL010 driver was amended to acquire the port spinlock in the IRQ handler, obviating the need to disable interrupts in ->set_termios():
https://git.kernel.org/history/history/c/157c0342e591

That rendered the CR register write obsolete. Drop it.

---
 drivers/tty/serial/amba-pl010.c | 3 ---
 1 file changed, 3 deletions(-)
drivers/tty/serial/amba-pl010.c +0 -3
index e744b953ca346..47654073123d6 100644
@@ -446,14 +446,11 @@ pl010_set_termios(struct uart_port *port, struct ktermios *termios,
 	if ((termios->c_cflag & CREAD) == 0)
 		uap->port.ignore_status_mask |= UART_DUMMY_RSR_RX;
 
-	/* first, disable everything */
 	old_cr = readb(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE;
 
 	if (UART_ENABLE_MS(port, termios->c_cflag))
 		old_cr |= UART010_CR_MSIE;
 
-	writel(0, uap->port.membase + UART010_CR);
-
 	/* Set baud rate */
 	quot -= 1;
 	writel((quot & 0xf00) >> 8, uap->port.membase + UART010_LCRM);
Signature · 1 line
2.34.1
author maintainer
#181 lore raw

PATCH 177/188 serial: pl011: Drop CR register reset on set_termios

In reply to Sasha Levin

From: Lukas Wunner <[email protected]>

[ Upstream commit e368cc656fd6d0075f1c3ab9676e2001451e3e04 ]

pl011_set_termios() briefly resets the CR register to zero, thereby glitching DTR/RTS signals. With rs485 this may result in the bus being occupied for no reason.

Where does this register write originate from?

The PL011 driver was forked from the PL010 driver in 2004:
https://git.kernel.org/history/history/c/157c0342e591

Until this commit, the PL010 driver's IRQ handler ambauart_int() modified the CR register without holding the port spinlock.

ambauart_set_termios() also modified that register. To prevent concurrent read-modify-writes by the IRQ handler and to prevent transmission while changing baudrate, ambauart_set_termios() had to disable interrupts. On the PL010, that is achieved by writing zero to the CR register.

However, on the PL011, interrupts are disabled in the IMSC register, not in the CR register.

Additionally, the commit amended both the PL010 and PL011 driver to acquire the port spinlock in the IRQ handler, obviating the need to disable interrupts in ->set_termios().

So the CR register write is obsolete for two reasons. Drop it.

---
 drivers/tty/serial/amba-pl011.c | 2 --
 1 file changed, 2 deletions(-)
drivers/tty/serial/amba-pl011.c +0 -2
index 52518a606c06a..9b1b0d9bdf7be 100644
@@ -2105,9 +2105,7 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
 	if (port->rs485.flags & SER_RS485_ENABLED)
 		termios->c_cflag &= ~CRTSCTS;
 
-	/* first, disable everything */
 	old_cr = pl011_read(uap, REG_CR);
-	pl011_write(0, uap, REG_CR);
 
 	if (termios->c_cflag & CRTSCTS) {
 		if (old_cr & UART011_CR_RTS)
Signature · 1 line
2.34.1
author maintainer
#182 lore raw

PATCH 178/188 serial: core: Keep mctrl register state and cached copy in sync

In reply to Sasha Levin

From: Lukas Wunner <[email protected]>

[ Upstream commit 93a770b7e16772530196674ffc79bb13fa927dc6 ]

struct uart_port contains a cached copy of the Modem Control signals. It is used to skip register writes in uart_update_mctrl() if the new signal state equals the old signal state. It also avoids a register read to obtain the current state of output signals.

When a uart_port is registered, uart_configure_port() changes signal state but neglects to keep the cached copy in sync. That may cause a subsequent register write to be incorrectly skipped. Fix it before it trips somebody up.

This behavior has been present ever since the serial core was introduced in 2002:
https://git.kernel.org/history/history/c/33c0d1b0c3eb

So far it was never an issue because the cached copy is initialized to 0 by kzalloc() and when uart_configure_port() is executed, at most DTR has been set by uart_set_options() or sunsu_console_setup(). Therefore, a stable designation seems unnecessary.

---
 drivers/tty/serial/serial_core.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/tty/serial/serial_core.c +2 -1
index 61e3dd0222af1..9e7e624a6c9db 100644
@@ -2393,7 +2393,8 @@ uart_configure_port(struct uart_driver *drv, struct uart_state *state,
 		 * We probably don't need a spinlock around this, but
 		 */
 		spin_lock_irqsave(&port->lock, flags);
-		port->ops->set_mctrl(port, port->mctrl & TIOCM_DTR);
+		port->mctrl &= TIOCM_DTR;
+		port->ops->set_mctrl(port, port->mctrl);
 		spin_unlock_irqrestore(&port->lock, flags);
 
 		/*
Signature · 1 line
2.34.1
author maintainer
#183 lore raw

PATCH 179/188 random: do not throw away excess input to crng_fast_load

In reply to Sasha Levin

From: "Jason A. Donenfeld" <[email protected]>

[ Upstream commit 73c7733f122e8d0107f88655a12011f68f69e74b ]

When crng_fast_load() is called by add_hwgenerator_randomness(), we currently will advance to crng_init==1 once we've acquired 64 bytes, and then throw away the rest of the buffer. Usually, that is not a problem:
When add_hwgenerator_randomness() gets called via EFI or DT during setup_arch(), there won't be any IRQ randomness. Therefore, the 64 bytes passed by EFI exactly matches what is needed to advance to crng_init==1. Usually, DT seems to pass 64 bytes as well -- with one notable exception being kexec, which hands over 128 bytes of entropy to the kexec'd kernel. In that case, we'll advance to crng_init==1 once 64 of those bytes are consumed by crng_fast_load(), but won't continue onward feeding in bytes to progress to crng_init==2. This commit fixes the issue by feeding any leftover bytes into the next phase in add_hwgenerator_randomness().

---
 drivers/char/random.c | 19 ++++++++++++-------
 1 file changed, 12 insertions(+), 7 deletions(-)
drivers/char/random.c +12 -7
index 605969ed0f965..9c403bbb21a1f 100644
@@ -863,12 +863,14 @@ static void numa_crng_init(void) {}
 
 /*
  * crng_fast_load() can be called by code in the interrupt service
- * path.  So we can't afford to dilly-dally.
+ * path.  So we can't afford to dilly-dally. Returns the number of
+ * bytes processed from cp.
  */
-static int crng_fast_load(const char *cp, size_t len)
+static size_t crng_fast_load(const char *cp, size_t len)
 {
 	unsigned long flags;
 	char *p;
+	size_t ret = 0;
 
 	if (!spin_trylock_irqsave(&primary_crng.lock, flags))
 		return 0;
@@ -879,7 +881,7 @@ static int crng_fast_load(const char *cp, size_t len)
 	p = (unsigned char *) &primary_crng.state[4];
 	while (len > 0 && crng_init_cnt < CRNG_INIT_CNT_THRESH) {
 		p[crng_init_cnt % CHACHA_KEY_SIZE] ^= *cp;
-		cp++; crng_init_cnt++; len--;
+		cp++; crng_init_cnt++; len--; ret++;
 	}
 	spin_unlock_irqrestore(&primary_crng.lock, flags);
 	if (crng_init_cnt >= CRNG_INIT_CNT_THRESH) {
@@ -887,7 +889,7 @@ static int crng_fast_load(const char *cp, size_t len)
 		crng_init = 1;
 		pr_notice("fast init done\n");
 	}
-	return 1;
+	return ret;
 }
 
 /*
@@ -1269,7 +1271,7 @@ void add_interrupt_randomness(int irq, int irq_flags)
 	if (unlikely(crng_init == 0)) {
 		if ((fast_pool->count >= 64) &&
 		    crng_fast_load((char *) fast_pool->pool,
-				   sizeof(fast_pool->pool))) {
+				   sizeof(fast_pool->pool)) > 0) {
 			fast_pool->count = 0;
 			fast_pool->last = now;
 		}
@@ -2275,8 +2277,11 @@ void add_hwgenerator_randomness(const char *buffer, size_t count,
 	struct entropy_store *poolp = &input_pool;
 
 	if (unlikely(crng_init == 0)) {
-		crng_fast_load(buffer, count);
-		return;
+		size_t ret = crng_fast_load(buffer, count);
+		count -= ret;
+		buffer += ret;
+		if (!count || crng_init == 0)
+			return;
 	}
 
 	/* Suspend writing if we're above the trickle threshold.
Signature · 1 line
2.34.1
author maintainer
#184 lore raw

PATCH 180/188 net/mlx5: Update log_max_qp value to FW max capability

In reply to Sasha Levin

From: Maher Sanalla <[email protected]>

[ Upstream commit f79a609ea6bf54ad2d2c24e4de4524288b221666 ]

log_max_qp in driver's default profile #2 was set to 18, but FW actually supports 17 at the most - a situation that led to the concerning print when the driver is loaded:
"log_max_qp value in current profile is 18, changing to HCA capabaility limit (17)"

The expected behavior from mlx5_profile #2 is to match the maximum FW capability in regards to log_max_qp. Thus, log_max_qp in profile #2 is initialized to a defined static value (0xff) - which basically means that when loading this profile, log_max_qp value will be what the currently installed FW supports at most.

---
 drivers/net/ethernet/mellanox/mlx5/core/main.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
drivers/net/ethernet/mellanox/mlx5/core/main.c +6 -2
index 92b01858d7f3e..29b7297a836a5 100644
@@ -97,6 +97,8 @@ enum {
 	MLX5_ATOMIC_REQ_MODE_HOST_ENDIANNESS = 0x1,
 };
 
+#define LOG_MAX_SUPPORTED_QPS 0xff
+
 static struct mlx5_profile profile[] = {
 	[0] = {
 		.mask           = 0,
@@ -108,7 +110,7 @@ static struct mlx5_profile profile[] = {
 	[2] = {
 		.mask		= MLX5_PROF_MASK_QP_SIZE |
 				  MLX5_PROF_MASK_MR_CACHE,
-		.log_max_qp	= 18,
+		.log_max_qp	= LOG_MAX_SUPPORTED_QPS,
 		.mr_cache[0]	= {
 			.size	= 500,
 			.limit	= 250
@@ -513,7 +515,9 @@ static int handle_hca_cap(struct mlx5_core_dev *dev, void *set_ctx)
 		 to_fw_pkey_sz(dev, 128));
 
 	/* Check log_max_qp from HCA caps to set in current profile */
-	if (MLX5_CAP_GEN_MAX(dev, log_max_qp) < prof->log_max_qp) {
+	if (prof->log_max_qp == LOG_MAX_SUPPORTED_QPS) {
+		prof->log_max_qp = MLX5_CAP_GEN_MAX(dev, log_max_qp);
+	} else if (MLX5_CAP_GEN_MAX(dev, log_max_qp) < prof->log_max_qp) {
 		mlx5_core_warn(dev, "log_max_qp value in current profile is %d, changing it to HCA capability limit (%d)\n",
 			       prof->log_max_qp,
 			       MLX5_CAP_GEN_MAX(dev, log_max_qp));
Signature · 1 line
2.34.1
author maintainer
#185 lore raw

PATCH 181/188 net/mlx5e: Unblock setting vid 0 for VF in case PF isn't eswitch manager

In reply to Sasha Levin

From: Maor Dickman <[email protected]>

[ Upstream commit 7846665d3504812acaebf920d1141851379a7f37 ]

When using libvirt to passthrough VF to VM it will always set the VF vlan to 0 even if user didn’t request it, this will cause libvirt to fail to boot in case the PF isn't eswitch owner.

Example of such case is the DPU host PF which isn't eswitch manager, so any attempt to passthrough VF of it using libvirt will fail.

Fix it by not returning error in case set VF vlan is called with vid 0.

---
 drivers/net/ethernet/mellanox/mlx5/core/esw/legacy.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/mellanox/mlx5/core/esw/legacy.c +1 -1
index df277a6cddc0b..0c4c743ca31e1 100644
@@ -431,7 +431,7 @@ int mlx5_eswitch_set_vport_vlan(struct mlx5_eswitch *esw,
 	int err = 0;
 
 	if (!mlx5_esw_allowed(esw))
-		return -EPERM;
+		return vlan ? -EPERM : 0;
 
 	if (vlan || qos)
 		set_flags = SET_VLAN_STRIP | SET_VLAN_INSERT;
Signature · 1 line
2.34.1
author maintainer
#186 lore raw

PATCH 182/188 parisc: Avoid calling faulthandler_disabled() twice

In reply to Sasha Levin

From: John David Anglin <[email protected]>

[ Upstream commit 9e9d4b460f23bab61672eae397417d03917d116c ]

In handle_interruption(), we call faulthandler_disabled() to check whether the fault handler is not disabled. If the fault handler is disabled, we immediately call do_page_fault(). It then calls faulthandler_disabled(). If disabled, do_page_fault() attempts to fixup the exception by jumping to no_context:

no_context:

        if (!user_mode(regs) && fixup_exception(regs)) {
                return;
        }

        parisc_terminate("Bad Address (null pointer deref?)", regs, code, address);

Apart from the error messages, the two blocks of code perform the same function.

We can avoid two calls to faulthandler_disabled() by a simple revision to the code in handle_interruption().

Note: I didn't try to fix the formatting of this code block.

---
 arch/parisc/kernel/traps.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/parisc/kernel/traps.c +1 -1
index 197cb8480350c..afe8b902a8fc4 100644
@@ -784,7 +784,7 @@ void notrace handle_interruption(int code, struct pt_regs *regs)
 	     * unless pagefault_disable() was called before.
 	     */
 
-	    if (fault_space == 0 && !faulthandler_disabled())
+	    if (faulthandler_disabled() || fault_space == 0)
 	    {
 		/* Clean up and return if in exception table. */
 		if (fixup_exception(regs))
Signature · 1 line
2.34.1
author maintainer
#187 lore raw

PATCH 183/188 scripts: sphinx-pre-install: Fix ctex support on Debian

In reply to Sasha Levin

From: Mauro Carvalho Chehab <[email protected]>

[ Upstream commit 87d6576ddf8ac25f36597bc93ca17f6628289c16 ]

The name of the package with ctexhook.sty is different on Debian/Ubuntu.

---
 scripts/sphinx-pre-install | 3 +++
 1 file changed, 3 insertions(+)
scripts/sphinx-pre-install +3 -0
index 288e86a9d1e58..61a79ce705ccf 100755
@@ -369,6 +369,9 @@ sub give_debian_hints()
 	);
 
 	if ($pdf) {
+		check_missing_file(["/usr/share/texlive/texmf-dist/tex/latex/ctex/ctexhook.sty"],
+				   "texlive-lang-chinese", 2);
+
 		check_missing_file(["/usr/share/fonts/truetype/dejavu/DejaVuSans.ttf"],
 				   "fonts-dejavu", 2);
 
Signature · 1 line
2.34.1
author maintainer
#188 lore raw

PATCH 184/188 can: flexcan: allow to change quirks at runtime

In reply to Sasha Levin

From: Dario Binacchi <[email protected]>

[ Upstream commit 01bb4dccd92b4dc21f6af3312e5696924e371111 ]

This is a preparation patch for the upcoming support to change the rx-rtr capability via the ethtool API.

---
 drivers/net/can/flexcan.c | 54 +++++++++++++++++++--------------------
 1 file changed, 27 insertions(+), 27 deletions(-)
drivers/net/can/flexcan.c +27 -27
index 7734229aa0788..3178557e40208 100644
@@ -365,7 +365,7 @@ struct flexcan_priv {
 
 	struct clk *clk_ipg;
 	struct clk *clk_per;
-	const struct flexcan_devtype_data *devtype_data;
+	struct flexcan_devtype_data devtype_data;
 	struct regulator *reg_xceiver;
 	struct flexcan_stop_mode stm;
 
@@ -596,7 +596,7 @@ static inline int flexcan_enter_stop_mode(struct flexcan_priv *priv)
 	priv->write(reg_mcr, &regs->mcr);
 
 	/* enable stop request */
-	if (priv->devtype_data->quirks & FLEXCAN_QUIRK_SETUP_STOP_MODE_SCFW) {
+	if (priv->devtype_data.quirks & FLEXCAN_QUIRK_SETUP_STOP_MODE_SCFW) {
 		ret = flexcan_stop_mode_enable_scfw(priv, true);
 		if (ret < 0)
 			return ret;
@@ -615,7 +615,7 @@ static inline int flexcan_exit_stop_mode(struct flexcan_priv *priv)
 	int ret;
 
 	/* remove stop request */
-	if (priv->devtype_data->quirks & FLEXCAN_QUIRK_SETUP_STOP_MODE_SCFW) {
+	if (priv->devtype_data.quirks & FLEXCAN_QUIRK_SETUP_STOP_MODE_SCFW) {
 		ret = flexcan_stop_mode_enable_scfw(priv, false);
 		if (ret < 0)
 			return ret;
@@ -1018,7 +1018,7 @@ static struct sk_buff *flexcan_mailbox_read(struct can_rx_offload *offload,
 
 	mb = flexcan_get_mb(priv, n);
 
-	if (priv->devtype_data->quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP) {
+	if (priv->devtype_data.quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP) {
 		u32 code;
 
 		do {
@@ -1083,7 +1083,7 @@ static struct sk_buff *flexcan_mailbox_read(struct can_rx_offload *offload,
 	}
 
  mark_as_read:
-	if (priv->devtype_data->quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP)
+	if (priv->devtype_data.quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP)
 		flexcan_write64(priv, FLEXCAN_IFLAG_MB(n), &regs->iflag1);
 	else
 		priv->write(FLEXCAN_IFLAG_RX_FIFO_AVAILABLE, &regs->iflag1);
@@ -1109,7 +1109,7 @@ static irqreturn_t flexcan_irq(int irq, void *dev_id)
 	enum can_state last_state = priv->can.state;
 
 	/* reception interrupt */
-	if (priv->devtype_data->quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP) {
+	if (priv->devtype_data.quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP) {
 		u64 reg_iflag_rx;
 		int ret;
 
@@ -1169,7 +1169,7 @@ static irqreturn_t flexcan_irq(int irq, void *dev_id)
 
 	/* state change interrupt or broken error state quirk fix is enabled */
 	if ((reg_esr & FLEXCAN_ESR_ERR_STATE) ||
-	    (priv->devtype_data->quirks & (FLEXCAN_QUIRK_BROKEN_WERR_STATE |
+	    (priv->devtype_data.quirks & (FLEXCAN_QUIRK_BROKEN_WERR_STATE |
 					   FLEXCAN_QUIRK_BROKEN_PERR_STATE)))
 		flexcan_irq_state(dev, reg_esr);
 
@@ -1191,11 +1191,11 @@ static irqreturn_t flexcan_irq(int irq, void *dev_id)
 	 * (1): enabled if FLEXCAN_QUIRK_BROKEN_WERR_STATE is enabled
 	 */
 	if ((last_state != priv->can.state) &&
-	    (priv->devtype_data->quirks & FLEXCAN_QUIRK_BROKEN_PERR_STATE) &&
+	    (priv->devtype_data.quirks & FLEXCAN_QUIRK_BROKEN_PERR_STATE) &&
 	    !(priv->can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING)) {
 		switch (priv->can.state) {
 		case CAN_STATE_ERROR_ACTIVE:
-			if (priv->devtype_data->quirks &
+			if (priv->devtype_data.quirks &
 			    FLEXCAN_QUIRK_BROKEN_WERR_STATE)
 				flexcan_error_irq_enable(priv);
 			else
@@ -1423,13 +1423,13 @@ static int flexcan_rx_offload_setup(struct net_device *dev)
 	else
 		priv->mb_size = sizeof(struct flexcan_mb) + CAN_MAX_DLEN;
 
-	if (priv->devtype_data->quirks & FLEXCAN_QUIRK_NR_MB_16)
+	if (priv->devtype_data.quirks & FLEXCAN_QUIRK_NR_MB_16)
 		priv->mb_count = 16;
 	else
 		priv->mb_count = (sizeof(priv->regs->mb[0]) / priv->mb_size) +
 				 (sizeof(priv->regs->mb[1]) / priv->mb_size);
 
-	if (priv->devtype_data->quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP)
+	if (priv->devtype_data.quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP)
 		priv->tx_mb_reserved =
 			flexcan_get_mb(priv, FLEXCAN_TX_MB_RESERVED_OFF_TIMESTAMP);
 	else
@@ -1441,7 +1441,7 @@ static int flexcan_rx_offload_setup(struct net_device *dev)
 
 	priv->offload.mailbox_read = flexcan_mailbox_read;
 
-	if (priv->devtype_data->quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP) {
+	if (priv->devtype_data.quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP) {
 		priv->offload.mb_first = FLEXCAN_RX_MB_OFF_TIMESTAMP_FIRST;
 		priv->offload.mb_last = priv->mb_count - 2;
 
@@ -1506,7 +1506,7 @@ static int flexcan_chip_start(struct net_device *dev)
 	if (err)
 		goto out_chip_disable;
 
-	if (priv->devtype_data->quirks & FLEXCAN_QUIRK_SUPPORT_ECC)
+	if (priv->devtype_data.quirks & FLEXCAN_QUIRK_SUPPORT_ECC)
 		flexcan_ram_init(dev);
 
 	flexcan_set_bittiming(dev);
@@ -1535,7 +1535,7 @@ static int flexcan_chip_start(struct net_device *dev)
 	 * - disable for timestamp mode
 	 * - enable for FIFO mode
 	 */
-	if (priv->devtype_data->quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP)
+	if (priv->devtype_data.quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP)
 		reg_mcr &= ~FLEXCAN_MCR_FEN;
 	else
 		reg_mcr |= FLEXCAN_MCR_FEN;
@@ -1586,7 +1586,7 @@ static int flexcan_chip_start(struct net_device *dev)
 	 * on most Flexcan cores, too. Otherwise we don't get
 	 * any error warning or passive interrupts.
 	 */
-	if (priv->devtype_data->quirks & FLEXCAN_QUIRK_BROKEN_WERR_STATE ||
+	if (priv->devtype_data.quirks & FLEXCAN_QUIRK_BROKEN_WERR_STATE ||
 	    priv->can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING)
 		reg_ctrl |= FLEXCAN_CTRL_ERR_MSK;
 	else
@@ -1599,7 +1599,7 @@ static int flexcan_chip_start(struct net_device *dev)
 	netdev_dbg(dev, "%s: writing ctrl=0x%08x", __func__, reg_ctrl);
 	priv->write(reg_ctrl, &regs->ctrl);
 
-	if ((priv->devtype_data->quirks & FLEXCAN_QUIRK_ENABLE_EACEN_RRS)) {
+	if ((priv->devtype_data.quirks & FLEXCAN_QUIRK_ENABLE_EACEN_RRS)) {
 		reg_ctrl2 = priv->read(&regs->ctrl2);
 		reg_ctrl2 |= FLEXCAN_CTRL2_EACEN | FLEXCAN_CTRL2_RRS;
 		priv->write(reg_ctrl2, &regs->ctrl2);
@@ -1631,7 +1631,7 @@ static int flexcan_chip_start(struct net_device *dev)
 		priv->write(reg_fdctrl, &regs->fdctrl);
 	}
 
-	if (priv->devtype_data->quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP) {
+	if (priv->devtype_data.quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP) {
 		for (i = priv->offload.mb_first; i <= priv->offload.mb_last; i++) {
 			mb = flexcan_get_mb(priv, i);
 			priv->write(FLEXCAN_MB_CODE_RX_EMPTY,
@@ -1659,7 +1659,7 @@ static int flexcan_chip_start(struct net_device *dev)
 	priv->write(0x0, &regs->rx14mask);
 	priv->write(0x0, &regs->rx15mask);
 
-	if (priv->devtype_data->quirks & FLEXCAN_QUIRK_DISABLE_RXFG)
+	if (priv->devtype_data.quirks & FLEXCAN_QUIRK_DISABLE_RXFG)
 		priv->write(0x0, &regs->rxfgmask);
 
 	/* clear acceptance filters */
@@ -1673,7 +1673,7 @@ static int flexcan_chip_start(struct net_device *dev)
 	 * This also works around errata e5295 which generates false
 	 * positive memory errors and put the device in freeze mode.
 	 */
-	if (priv->devtype_data->quirks & FLEXCAN_QUIRK_DISABLE_MECR) {
+	if (priv->devtype_data.quirks & FLEXCAN_QUIRK_DISABLE_MECR) {
 		/* Follow the protocol as described in "Detection
 		 * and Correction of Memory Errors" to write to
 		 * MECR register (step 1 - 5)
@@ -1799,7 +1799,7 @@ static int flexcan_open(struct net_device *dev)
 	if (err)
 		goto out_can_rx_offload_disable;
 
-	if (priv->devtype_data->quirks & FLEXCAN_QUIRK_NR_IRQ_3) {
+	if (priv->devtype_data.quirks & FLEXCAN_QUIRK_NR_IRQ_3) {
 		err = request_irq(priv->irq_boff,
 				  flexcan_irq, IRQF_SHARED, dev->name, dev);
 		if (err)
@@ -1845,7 +1845,7 @@ static int flexcan_close(struct net_device *dev)
 	netif_stop_queue(dev);
 	flexcan_chip_interrupts_disable(dev);
 
-	if (priv->devtype_data->quirks & FLEXCAN_QUIRK_NR_IRQ_3) {
+	if (priv->devtype_data.quirks & FLEXCAN_QUIRK_NR_IRQ_3) {
 		free_irq(priv->irq_err, dev);
 		free_irq(priv->irq_boff, dev);
 	}
@@ -2051,9 +2051,9 @@ static int flexcan_setup_stop_mode(struct platform_device *pdev)
 
 	priv = netdev_priv(dev);
 
-	if (priv->devtype_data->quirks & FLEXCAN_QUIRK_SETUP_STOP_MODE_SCFW)
+	if (priv->devtype_data.quirks & FLEXCAN_QUIRK_SETUP_STOP_MODE_SCFW)
 		ret = flexcan_setup_stop_mode_scfw(pdev);
-	else if (priv->devtype_data->quirks & FLEXCAN_QUIRK_SETUP_STOP_MODE_GPR)
+	else if (priv->devtype_data.quirks & FLEXCAN_QUIRK_SETUP_STOP_MODE_GPR)
 		ret = flexcan_setup_stop_mode_gpr(pdev);
 	else
 		/* return 0 directly if doesn't support stop mode feature */
@@ -2181,9 +2181,10 @@ static int flexcan_probe(struct platform_device *pdev)
 	dev->flags |= IFF_ECHO;
 
 	priv = netdev_priv(dev);
+	priv->devtype_data = *devtype_data;
 
 	if (of_property_read_bool(pdev->dev.of_node, "big-endian") ||
-	    devtype_data->quirks & FLEXCAN_QUIRK_DEFAULT_BIG_ENDIAN) {
+	    priv->devtype_data.quirks & FLEXCAN_QUIRK_DEFAULT_BIG_ENDIAN) {
 		priv->read = flexcan_read_be;
 		priv->write = flexcan_write_be;
 	} else {
@@ -2202,10 +2203,9 @@ static int flexcan_probe(struct platform_device *pdev)
 	priv->clk_ipg = clk_ipg;
 	priv->clk_per = clk_per;
 	priv->clk_src = clk_src;
-	priv->devtype_data = devtype_data;
 	priv->reg_xceiver = reg_xceiver;
 
-	if (devtype_data->quirks & FLEXCAN_QUIRK_NR_IRQ_3) {
+	if (priv->devtype_data.quirks & FLEXCAN_QUIRK_NR_IRQ_3) {
 		priv->irq_boff = platform_get_irq(pdev, 1);
 		if (priv->irq_boff <= 0) {
 			err = -ENODEV;
@@ -2218,7 +2218,7 @@ static int flexcan_probe(struct platform_device *pdev)
 		}
 	}
 
-	if (priv->devtype_data->quirks & FLEXCAN_QUIRK_SUPPORT_FD) {
+	if (priv->devtype_data.quirks & FLEXCAN_QUIRK_SUPPORT_FD) {
 		priv->can.ctrlmode_supported |= CAN_CTRLMODE_FD |
 			CAN_CTRLMODE_FD_NON_ISO;
 		priv->can.bittiming_const = &flexcan_fd_bittiming_const;
Signature · 1 line
2.34.1
author maintainer
#189 lore raw

PATCH 185/188 can: flexcan: rename RX modes

In reply to Sasha Levin

From: Marc Kleine-Budde <[email protected]>

[ Upstream commit 34ea4e1c99f1f177f87e4ae7896caef238dd741a ]

Most flexcan IP cores support 2 RX modes:
- FIFO
- mailbox

The names for these modes were chosen to reflect the name of the rx-offload mode they are using.

The name of the RX modes should better reflect their difference with regards the flexcan IP core. So this patch renames the various occurrences of OFF_FIFO to RX_FIFO and OFF_TIMESTAMP to RX_MAILBOX:

| FLEXCAN_TX_MB_RESERVED_OFF_FIFO -> FLEXCAN_TX_MB_RESERVED_RX_FIFO
| FLEXCAN_TX_MB_RESERVED_OFF_TIMESTAMP -> FLEXCAN_TX_MB_RESERVED_RX_MAILBOX
| FLEXCAN_QUIRK_USE_OFF_TIMESTAMP -> FLEXCAN_QUIRK_USE_RX_MAILBOX
---
 drivers/net/can/flexcan.c | 48 +++++++++++++++++++--------------------
 1 file changed, 24 insertions(+), 24 deletions(-)
drivers/net/can/flexcan.c +24 -24
index 3178557e40208..02299befe2852 100644
@@ -173,9 +173,9 @@
 
 /* FLEXCAN interrupt flag register (IFLAG) bits */
 /* Errata ERR005829 step7: Reserve first valid MB */
-#define FLEXCAN_TX_MB_RESERVED_OFF_FIFO		8
-#define FLEXCAN_TX_MB_RESERVED_OFF_TIMESTAMP	0
-#define FLEXCAN_RX_MB_OFF_TIMESTAMP_FIRST	(FLEXCAN_TX_MB_RESERVED_OFF_TIMESTAMP + 1)
+#define FLEXCAN_TX_MB_RESERVED_RX_FIFO	8
+#define FLEXCAN_TX_MB_RESERVED_RX_MAILBOX	0
+#define FLEXCAN_RX_MB_RX_MAILBOX_FIRST	(FLEXCAN_TX_MB_RESERVED_RX_MAILBOX + 1)
 #define FLEXCAN_IFLAG_MB(x)		BIT_ULL(x)
 #define FLEXCAN_IFLAG_RX_FIFO_OVERFLOW	BIT(7)
 #define FLEXCAN_IFLAG_RX_FIFO_WARN	BIT(6)
@@ -234,8 +234,8 @@
 #define FLEXCAN_QUIRK_ENABLE_EACEN_RRS  BIT(3)
 /* Disable non-correctable errors interrupt and freeze mode */
 #define FLEXCAN_QUIRK_DISABLE_MECR BIT(4)
-/* Use timestamp based offloading */
-#define FLEXCAN_QUIRK_USE_OFF_TIMESTAMP BIT(5)
+/* Use mailboxes (not FIFO) for RX path */
+#define FLEXCAN_QUIRK_USE_RX_MAILBOX BIT(5)
 /* No interrupt for error passive */
 #define FLEXCAN_QUIRK_BROKEN_PERR_STATE BIT(6)
 /* default to BE register access */
@@ -402,38 +402,38 @@ static const struct flexcan_devtype_data fsl_imx28_devtype_data = {
 
 static const struct flexcan_devtype_data fsl_imx6q_devtype_data = {
 	.quirks = FLEXCAN_QUIRK_DISABLE_RXFG | FLEXCAN_QUIRK_ENABLE_EACEN_RRS |
-		FLEXCAN_QUIRK_USE_OFF_TIMESTAMP | FLEXCAN_QUIRK_BROKEN_PERR_STATE |
+		FLEXCAN_QUIRK_USE_RX_MAILBOX | FLEXCAN_QUIRK_BROKEN_PERR_STATE |
 		FLEXCAN_QUIRK_SETUP_STOP_MODE_GPR,
 };
 
 static const struct flexcan_devtype_data fsl_imx8qm_devtype_data = {
 	.quirks = FLEXCAN_QUIRK_DISABLE_RXFG | FLEXCAN_QUIRK_ENABLE_EACEN_RRS |
-		FLEXCAN_QUIRK_USE_OFF_TIMESTAMP | FLEXCAN_QUIRK_BROKEN_PERR_STATE |
+		FLEXCAN_QUIRK_USE_RX_MAILBOX | FLEXCAN_QUIRK_BROKEN_PERR_STATE |
 		FLEXCAN_QUIRK_SUPPORT_FD | FLEXCAN_QUIRK_SETUP_STOP_MODE_SCFW,
 };
 
 static struct flexcan_devtype_data fsl_imx8mp_devtype_data = {
 	.quirks = FLEXCAN_QUIRK_DISABLE_RXFG | FLEXCAN_QUIRK_ENABLE_EACEN_RRS |
-		FLEXCAN_QUIRK_DISABLE_MECR | FLEXCAN_QUIRK_USE_OFF_TIMESTAMP |
+		FLEXCAN_QUIRK_DISABLE_MECR | FLEXCAN_QUIRK_USE_RX_MAILBOX |
 		FLEXCAN_QUIRK_BROKEN_PERR_STATE | FLEXCAN_QUIRK_SETUP_STOP_MODE_GPR |
 		FLEXCAN_QUIRK_SUPPORT_FD | FLEXCAN_QUIRK_SUPPORT_ECC,
 };
 
 static const struct flexcan_devtype_data fsl_vf610_devtype_data = {
 	.quirks = FLEXCAN_QUIRK_DISABLE_RXFG | FLEXCAN_QUIRK_ENABLE_EACEN_RRS |
-		FLEXCAN_QUIRK_DISABLE_MECR | FLEXCAN_QUIRK_USE_OFF_TIMESTAMP |
+		FLEXCAN_QUIRK_DISABLE_MECR | FLEXCAN_QUIRK_USE_RX_MAILBOX |
 		FLEXCAN_QUIRK_BROKEN_PERR_STATE | FLEXCAN_QUIRK_SUPPORT_ECC,
 };
 
 static const struct flexcan_devtype_data fsl_ls1021a_r2_devtype_data = {
 	.quirks = FLEXCAN_QUIRK_DISABLE_RXFG | FLEXCAN_QUIRK_ENABLE_EACEN_RRS |
-		FLEXCAN_QUIRK_BROKEN_PERR_STATE | FLEXCAN_QUIRK_USE_OFF_TIMESTAMP,
+		FLEXCAN_QUIRK_BROKEN_PERR_STATE | FLEXCAN_QUIRK_USE_RX_MAILBOX,
 };
 
 static const struct flexcan_devtype_data fsl_lx2160a_r1_devtype_data = {
 	.quirks = FLEXCAN_QUIRK_DISABLE_RXFG | FLEXCAN_QUIRK_ENABLE_EACEN_RRS |
 		FLEXCAN_QUIRK_DISABLE_MECR | FLEXCAN_QUIRK_BROKEN_PERR_STATE |
-		FLEXCAN_QUIRK_USE_OFF_TIMESTAMP | FLEXCAN_QUIRK_SUPPORT_FD |
+		FLEXCAN_QUIRK_USE_RX_MAILBOX | FLEXCAN_QUIRK_SUPPORT_FD |
 		FLEXCAN_QUIRK_SUPPORT_ECC,
 };
 
@@ -1018,7 +1018,7 @@ static struct sk_buff *flexcan_mailbox_read(struct can_rx_offload *offload,
 
 	mb = flexcan_get_mb(priv, n);
 
-	if (priv->devtype_data.quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP) {
+	if (priv->devtype_data.quirks & FLEXCAN_QUIRK_USE_RX_MAILBOX) {
 		u32 code;
 
 		do {
@@ -1083,7 +1083,7 @@ static struct sk_buff *flexcan_mailbox_read(struct can_rx_offload *offload,
 	}
 
  mark_as_read:
-	if (priv->devtype_data.quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP)
+	if (priv->devtype_data.quirks & FLEXCAN_QUIRK_USE_RX_MAILBOX)
 		flexcan_write64(priv, FLEXCAN_IFLAG_MB(n), &regs->iflag1);
 	else
 		priv->write(FLEXCAN_IFLAG_RX_FIFO_AVAILABLE, &regs->iflag1);
@@ -1109,7 +1109,7 @@ static irqreturn_t flexcan_irq(int irq, void *dev_id)
 	enum can_state last_state = priv->can.state;
 
 	/* reception interrupt */
-	if (priv->devtype_data.quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP) {
+	if (priv->devtype_data.quirks & FLEXCAN_QUIRK_USE_RX_MAILBOX) {
 		u64 reg_iflag_rx;
 		int ret;
 
@@ -1429,20 +1429,20 @@ static int flexcan_rx_offload_setup(struct net_device *dev)
 		priv->mb_count = (sizeof(priv->regs->mb[0]) / priv->mb_size) +
 				 (sizeof(priv->regs->mb[1]) / priv->mb_size);
 
-	if (priv->devtype_data.quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP)
+	if (priv->devtype_data.quirks & FLEXCAN_QUIRK_USE_RX_MAILBOX)
 		priv->tx_mb_reserved =
-			flexcan_get_mb(priv, FLEXCAN_TX_MB_RESERVED_OFF_TIMESTAMP);
+			flexcan_get_mb(priv, FLEXCAN_TX_MB_RESERVED_RX_MAILBOX);
 	else
 		priv->tx_mb_reserved =
-			flexcan_get_mb(priv, FLEXCAN_TX_MB_RESERVED_OFF_FIFO);
+			flexcan_get_mb(priv, FLEXCAN_TX_MB_RESERVED_RX_FIFO);
 	priv->tx_mb_idx = priv->mb_count - 1;
 	priv->tx_mb = flexcan_get_mb(priv, priv->tx_mb_idx);
 	priv->tx_mask = FLEXCAN_IFLAG_MB(priv->tx_mb_idx);
 
 	priv->offload.mailbox_read = flexcan_mailbox_read;
 
-	if (priv->devtype_data.quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP) {
-		priv->offload.mb_first = FLEXCAN_RX_MB_OFF_TIMESTAMP_FIRST;
+	if (priv->devtype_data.quirks & FLEXCAN_QUIRK_USE_RX_MAILBOX) {
+		priv->offload.mb_first = FLEXCAN_RX_MB_RX_MAILBOX_FIRST;
 		priv->offload.mb_last = priv->mb_count - 2;
 
 		priv->rx_mask = GENMASK_ULL(priv->offload.mb_last,
@@ -1532,10 +1532,10 @@ static int flexcan_chip_start(struct net_device *dev)
 	/* MCR
 	 *
 	 * FIFO:
-	 * - disable for timestamp mode
+	 * - disable for mailbox mode
 	 * - enable for FIFO mode
 	 */
-	if (priv->devtype_data.quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP)
+	if (priv->devtype_data.quirks & FLEXCAN_QUIRK_USE_RX_MAILBOX)
 		reg_mcr &= ~FLEXCAN_MCR_FEN;
 	else
 		reg_mcr |= FLEXCAN_MCR_FEN;
@@ -1631,7 +1631,7 @@ static int flexcan_chip_start(struct net_device *dev)
 		priv->write(reg_fdctrl, &regs->fdctrl);
 	}
 
-	if (priv->devtype_data.quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP) {
+	if (priv->devtype_data.quirks & FLEXCAN_QUIRK_USE_RX_MAILBOX) {
 		for (i = priv->offload.mb_first; i <= priv->offload.mb_last; i++) {
 			mb = flexcan_get_mb(priv, i);
 			priv->write(FLEXCAN_MB_CODE_RX_EMPTY,
@@ -1639,7 +1639,7 @@ static int flexcan_chip_start(struct net_device *dev)
 		}
 	} else {
 		/* clear and invalidate unused mailboxes first */
-		for (i = FLEXCAN_TX_MB_RESERVED_OFF_FIFO; i < priv->mb_count; i++) {
+		for (i = FLEXCAN_TX_MB_RESERVED_RX_FIFO; i < priv->mb_count; i++) {
 			mb = flexcan_get_mb(priv, i);
 			priv->write(FLEXCAN_MB_CODE_RX_INACTIVE,
 				    &mb->can_ctrl);
@@ -2164,7 +2164,7 @@ static int flexcan_probe(struct platform_device *pdev)
 		return -ENODEV;
 
 	if ((devtype_data->quirks & FLEXCAN_QUIRK_SUPPORT_FD) &&
-	    !(devtype_data->quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP)) {
+	    !(devtype_data->quirks & FLEXCAN_QUIRK_USE_RX_MAILBOX)) {
 		dev_err(&pdev->dev, "CAN-FD mode doesn't work with FIFO mode!\n");
 		return -EINVAL;
 	}
Signature · 1 line
2.34.1
author maintainer
#190 lore raw

PATCH 186/188 can: flexcan: add more quirks to describe RX path capabilities

In reply to Sasha Levin

From: Marc Kleine-Budde <[email protected]>

[ Upstream commit c5c88591040ee7d84d037328eed9019d3ffab821 ]

Most flexcan IP cores support 2 RX modes:
- FIFO
- mailbox

Some IP core versions cannot receive CAN RTR messages via mailboxes. This patch adds quirks to document this.

This information will be used in a later patch to switch from FIFO to more performant mailbox mode at the expense of losing the ability to receive RTR messages. This trade off is beneficial in certain use cases.

---
 drivers/net/can/flexcan.c | 66 ++++++++++++++++++++++++++++++++-------
 1 file changed, 54 insertions(+), 12 deletions(-)
drivers/net/can/flexcan.c +54 -12
index 02299befe2852..18d7bb99ec1bd 100644
@@ -252,6 +252,12 @@
 #define FLEXCAN_QUIRK_NR_IRQ_3 BIT(12)
 /* Setup 16 mailboxes */
 #define FLEXCAN_QUIRK_NR_MB_16 BIT(13)
+/* Device supports RX via mailboxes */
+#define FLEXCAN_QUIRK_SUPPPORT_RX_MAILBOX BIT(14)
+/* Device supports RTR reception via mailboxes */
+#define FLEXCAN_QUIRK_SUPPPORT_RX_MAILBOX_RTR BIT(15)
+/* Device supports RX via FIFO */
+#define FLEXCAN_QUIRK_SUPPPORT_RX_FIFO BIT(16)
 
 /* Structure of the message buffer */
 struct flexcan_mb {
@@ -382,59 +388,78 @@ struct flexcan_priv {
 
 static const struct flexcan_devtype_data fsl_mcf5441x_devtype_data = {
 	.quirks = FLEXCAN_QUIRK_BROKEN_PERR_STATE |
-		FLEXCAN_QUIRK_NR_IRQ_3 | FLEXCAN_QUIRK_NR_MB_16,
+		FLEXCAN_QUIRK_NR_IRQ_3 | FLEXCAN_QUIRK_NR_MB_16 |
+		FLEXCAN_QUIRK_SUPPPORT_RX_FIFO,
 };
 
 static const struct flexcan_devtype_data fsl_p1010_devtype_data = {
 	.quirks = FLEXCAN_QUIRK_BROKEN_WERR_STATE |
 		FLEXCAN_QUIRK_BROKEN_PERR_STATE |
-		FLEXCAN_QUIRK_DEFAULT_BIG_ENDIAN,
+		FLEXCAN_QUIRK_DEFAULT_BIG_ENDIAN |
+		FLEXCAN_QUIRK_SUPPPORT_RX_MAILBOX |
+		FLEXCAN_QUIRK_SUPPPORT_RX_FIFO,
 };
 
 static const struct flexcan_devtype_data fsl_imx25_devtype_data = {
 	.quirks = FLEXCAN_QUIRK_BROKEN_WERR_STATE |
-		FLEXCAN_QUIRK_BROKEN_PERR_STATE,
+		FLEXCAN_QUIRK_BROKEN_PERR_STATE |
+		FLEXCAN_QUIRK_SUPPPORT_RX_MAILBOX |
+		FLEXCAN_QUIRK_SUPPPORT_RX_FIFO,
 };
 
 static const struct flexcan_devtype_data fsl_imx28_devtype_data = {
-	.quirks = FLEXCAN_QUIRK_BROKEN_PERR_STATE,
+	.quirks = FLEXCAN_QUIRK_BROKEN_PERR_STATE |
+		FLEXCAN_QUIRK_SUPPPORT_RX_MAILBOX |
+		FLEXCAN_QUIRK_SUPPPORT_RX_FIFO,
 };
 
 static const struct flexcan_devtype_data fsl_imx6q_devtype_data = {
 	.quirks = FLEXCAN_QUIRK_DISABLE_RXFG | FLEXCAN_QUIRK_ENABLE_EACEN_RRS |
 		FLEXCAN_QUIRK_USE_RX_MAILBOX | FLEXCAN_QUIRK_BROKEN_PERR_STATE |
-		FLEXCAN_QUIRK_SETUP_STOP_MODE_GPR,
+		FLEXCAN_QUIRK_SETUP_STOP_MODE_GPR |
+		FLEXCAN_QUIRK_SUPPPORT_RX_MAILBOX |
+		FLEXCAN_QUIRK_SUPPPORT_RX_MAILBOX_RTR,
 };
 
 static const struct flexcan_devtype_data fsl_imx8qm_devtype_data = {
 	.quirks = FLEXCAN_QUIRK_DISABLE_RXFG | FLEXCAN_QUIRK_ENABLE_EACEN_RRS |
 		FLEXCAN_QUIRK_USE_RX_MAILBOX | FLEXCAN_QUIRK_BROKEN_PERR_STATE |
-		FLEXCAN_QUIRK_SUPPORT_FD | FLEXCAN_QUIRK_SETUP_STOP_MODE_SCFW,
+		FLEXCAN_QUIRK_SUPPORT_FD | FLEXCAN_QUIRK_SETUP_STOP_MODE_SCFW |
+		FLEXCAN_QUIRK_SUPPPORT_RX_MAILBOX |
+		FLEXCAN_QUIRK_SUPPPORT_RX_MAILBOX_RTR,
 };
 
 static struct flexcan_devtype_data fsl_imx8mp_devtype_data = {
 	.quirks = FLEXCAN_QUIRK_DISABLE_RXFG | FLEXCAN_QUIRK_ENABLE_EACEN_RRS |
 		FLEXCAN_QUIRK_DISABLE_MECR | FLEXCAN_QUIRK_USE_RX_MAILBOX |
 		FLEXCAN_QUIRK_BROKEN_PERR_STATE | FLEXCAN_QUIRK_SETUP_STOP_MODE_GPR |
-		FLEXCAN_QUIRK_SUPPORT_FD | FLEXCAN_QUIRK_SUPPORT_ECC,
+		FLEXCAN_QUIRK_SUPPORT_FD | FLEXCAN_QUIRK_SUPPORT_ECC |
+		FLEXCAN_QUIRK_SUPPPORT_RX_MAILBOX |
+		FLEXCAN_QUIRK_SUPPPORT_RX_MAILBOX_RTR,
 };
 
 static const struct flexcan_devtype_data fsl_vf610_devtype_data = {
 	.quirks = FLEXCAN_QUIRK_DISABLE_RXFG | FLEXCAN_QUIRK_ENABLE_EACEN_RRS |
 		FLEXCAN_QUIRK_DISABLE_MECR | FLEXCAN_QUIRK_USE_RX_MAILBOX |
-		FLEXCAN_QUIRK_BROKEN_PERR_STATE | FLEXCAN_QUIRK_SUPPORT_ECC,
+		FLEXCAN_QUIRK_BROKEN_PERR_STATE | FLEXCAN_QUIRK_SUPPORT_ECC |
+		FLEXCAN_QUIRK_SUPPPORT_RX_MAILBOX |
+		FLEXCAN_QUIRK_SUPPPORT_RX_MAILBOX_RTR,
 };
 
 static const struct flexcan_devtype_data fsl_ls1021a_r2_devtype_data = {
 	.quirks = FLEXCAN_QUIRK_DISABLE_RXFG | FLEXCAN_QUIRK_ENABLE_EACEN_RRS |
-		FLEXCAN_QUIRK_BROKEN_PERR_STATE | FLEXCAN_QUIRK_USE_RX_MAILBOX,
+		FLEXCAN_QUIRK_BROKEN_PERR_STATE | FLEXCAN_QUIRK_USE_RX_MAILBOX |
+		FLEXCAN_QUIRK_SUPPPORT_RX_MAILBOX |
+		FLEXCAN_QUIRK_SUPPPORT_RX_MAILBOX_RTR,
 };
 
 static const struct flexcan_devtype_data fsl_lx2160a_r1_devtype_data = {
 	.quirks = FLEXCAN_QUIRK_DISABLE_RXFG | FLEXCAN_QUIRK_ENABLE_EACEN_RRS |
 		FLEXCAN_QUIRK_DISABLE_MECR | FLEXCAN_QUIRK_BROKEN_PERR_STATE |
 		FLEXCAN_QUIRK_USE_RX_MAILBOX | FLEXCAN_QUIRK_SUPPORT_FD |
-		FLEXCAN_QUIRK_SUPPORT_ECC,
+		FLEXCAN_QUIRK_SUPPORT_ECC |
+		FLEXCAN_QUIRK_SUPPPORT_RX_MAILBOX |
+		FLEXCAN_QUIRK_SUPPPORT_RX_MAILBOX_RTR,
 };
 
 static const struct can_bittiming_const flexcan_bittiming_const = {
@@ -2164,8 +2189,25 @@ static int flexcan_probe(struct platform_device *pdev)
 		return -ENODEV;
 
 	if ((devtype_data->quirks & FLEXCAN_QUIRK_SUPPORT_FD) &&
-	    !(devtype_data->quirks & FLEXCAN_QUIRK_USE_RX_MAILBOX)) {
-		dev_err(&pdev->dev, "CAN-FD mode doesn't work with FIFO mode!\n");
+	    !((devtype_data->quirks &
+	       (FLEXCAN_QUIRK_USE_RX_MAILBOX |
+		FLEXCAN_QUIRK_SUPPPORT_RX_MAILBOX |
+		FLEXCAN_QUIRK_SUPPPORT_RX_MAILBOX_RTR |
+		FLEXCAN_QUIRK_SUPPPORT_RX_FIFO)) ==
+	      (FLEXCAN_QUIRK_USE_RX_MAILBOX |
+	       FLEXCAN_QUIRK_SUPPPORT_RX_MAILBOX |
+	       FLEXCAN_QUIRK_SUPPPORT_RX_MAILBOX_RTR))) {
+		dev_err(&pdev->dev, "CAN-FD mode doesn't work in RX-FIFO mode!\n");
+		return -EINVAL;
+	}
+
+	if ((devtype_data->quirks &
+	     (FLEXCAN_QUIRK_SUPPPORT_RX_MAILBOX |
+	      FLEXCAN_QUIRK_SUPPPORT_RX_MAILBOX_RTR)) ==
+	    FLEXCAN_QUIRK_SUPPPORT_RX_MAILBOX_RTR) {
+		dev_err(&pdev->dev,
+			"Quirks (0x%08x) inconsistent: RX_MAILBOX_RX supported but not RX_MAILBOX\n",
+			devtype_data->quirks);
 		return -EINVAL;
 	}
 
Signature · 1 line
2.34.1
author maintainer
#191 lore raw

PATCH 187/188 x86/kbuild: Enable CONFIG_KALLSYMS_ALL=y in the defconfigs

In reply to Sasha Levin

From: Ingo Molnar <[email protected]>

[ Upstream commit b6aa86cff44cf099299d3a5e66348cb709cd7964 ]

Most distro kernels have this option enabled, to improve debug output.

Lockdep also selects it.

Enable this in the defconfig kernel as well, to make it more representative of what people are using on x86.

---
 arch/x86/configs/i386_defconfig   | 1 +
 arch/x86/configs/x86_64_defconfig | 1 +
 2 files changed, 2 insertions(+)
arch/x86/configs/i386_defconfig +1 -0
index e81885384f604..99398cbdae434 100644
@@ -262,3 +262,4 @@ CONFIG_BLK_DEV_IO_TRACE=y
 CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
 CONFIG_EARLY_PRINTK_DBGP=y
 CONFIG_DEBUG_BOOT_PARAMS=y
+CONFIG_KALLSYMS_ALL=y
arch/x86/configs/x86_64_defconfig +1 -0
index e8a7a0af2bdaa..d7298b104a456 100644
@@ -258,3 +258,4 @@ CONFIG_BLK_DEV_IO_TRACE=y
 CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
 CONFIG_EARLY_PRINTK_DBGP=y
 CONFIG_DEBUG_BOOT_PARAMS=y
+CONFIG_KALLSYMS_ALL=y
Signature · 1 line
2.34.1
author maintainer
#192 lore raw

PATCH 188/188 ext4: allow to change s_last_trim_minblks via sysfs

In reply to Sasha Levin

From: Lukas Czerner <[email protected]>

[ Upstream commit 4a69aecbfb30a3fc85bf8028386c047d5607a97a ]

Ext4 has an optimization mechanism for batched disacrd (FITRIM) that should help speed up subsequent calls of FITRIM ioctl by skipping the groups that were previously trimmed. However because the FITRIM allows to set the minimum size of an extent to trim, ext4 stores the last minimum extent size and only avoids trimming the group if it was previously trimmed with minimum extent size equal to, or smaller than the current call.

There is currently no way to bypass the optimization without umount/mount cycle. This becomes a problem when the file system is live migrated to a different storage, because the optimization will prevent possibly useful discard calls to the storage.

Fix it by exporting the s_last_trim_minblks via sysfs interface which will allow us to set the minimum size to the number of blocks larger than subsequent FITRIM call, effectively bypassing the optimization.

By setting the s_last_trim_minblks to ULONG_MAX the optimization will be effectively cleared regardless of the previous state, or file system configuration.

For example:
getconf ULONG_MAX > /sys/fs/ext4/dm-1/last_trim_minblks

---
 fs/ext4/sysfs.c | 2 ++
 1 file changed, 2 insertions(+)
fs/ext4/sysfs.c +2 -0
index 2314f74465924..95d8a996d2d89 100644
@@ -245,6 +245,7 @@ EXT4_ATTR(last_error_time, 0444, last_error_time);
 EXT4_ATTR(journal_task, 0444, journal_task);
 EXT4_RW_ATTR_SBI_UI(mb_prefetch, s_mb_prefetch);
 EXT4_RW_ATTR_SBI_UI(mb_prefetch_limit, s_mb_prefetch_limit);
+EXT4_RW_ATTR_SBI_UL(last_trim_minblks, s_last_trim_minblks);
 
 static unsigned int old_bump_val = 128;
 EXT4_ATTR_PTR(max_writeback_mb_bump, 0444, pointer_ui, &old_bump_val);
@@ -295,6 +296,7 @@ static struct attribute *ext4_attrs[] = {
 #endif
 	ATTR_LIST(mb_prefetch),
 	ATTR_LIST(mb_prefetch_limit),
+	ATTR_LIST(last_trim_minblks),
 	NULL,
 };
 ATTRIBUTE_GROUPS(ext4);
Signature · 1 line
2.34.1