Add the base Ricoh RN5T568 PMIC driver
Subsystems (2)
PATCH v2 1/2 Add the base Ricoh RN5T568 PMIC driver
--- drivers/mfd/Kconfig | 6 ++ drivers/mfd/Makefile | 1 + drivers/mfd/rn5t568.c | 165 ++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 172 insertions(+) create mode 100644 drivers/mfd/rn5t568.c
drivers/mfd/Kconfig +6 -0
@@ -68,6 +68,12 @@ config MFD_STPMIC1 help Select this to support communication with the STPMIC1. +config MFD_RN568PMIC + depends on I2C + bool "Ricoh RN5T568 MFD driver" + help + Select this to support communication with the Ricoh RN5T568 PMIC. + config MFD_SUPERIO bool
drivers/mfd/Makefile +1 -0
@@ -13,6 +13,7 @@ obj-$(CONFIG_MFD_TWL4030) += twl4030.o obj-$(CONFIG_MFD_TWL6030) += twl6030.o obj-$(CONFIG_RAVE_SP_CORE) += rave-sp.o obj-$(CONFIG_MFD_STPMIC1) += stpmic1.o +obj-$(CONFIG_MFD_RN568PMIC) += rn5t568.o obj-$(CONFIG_MFD_SUPERIO) += superio.o obj-$(CONFIG_FINTEK_SUPERIO) += fintek-superio.o obj-$(CONFIG_SMSC_SUPERIO) += smsc-superio.o
drivers/mfd/rn5t568.c new file +165 -0
165 lines not on this page · raw message
Signature · 7 lines
2.30.2 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
PATCH v2 2/2 Add Ricoh RN5T568 PMIC based watchdog
--- drivers/watchdog/Kconfig | 6 ++ drivers/watchdog/Makefile | 1 + drivers/watchdog/rn5t568_wdt.c | 146 +++++++++++++++++++++++++++++++++ 3 files changed, 153 insertions(+) create mode 100644 drivers/watchdog/rn5t568_wdt.c
drivers/watchdog/Kconfig +6 -0
@@ -109,6 +109,12 @@ config STPMIC1_WATCHDOG help Enable to support configuration of the stpmic1's built-in watchdog. +config RN568_WATCHDOG + bool "Ricoh RN5t568 PMIC based Watchdog" + depends on MFD_RN568PMIC + help + Enable to support system control via the PMIC based watchdog. + config F71808E_WDT bool "Fintek F718xx, F818xx Super I/O Watchdog" depends on X86
drivers/watchdog/Makefile +1 -0
@@ -16,6 +16,7 @@ obj-$(CONFIG_ARCH_BCM283X) += bcm2835_wdt.o obj-$(CONFIG_RAVE_SP_WATCHDOG) += rave-sp-wdt.o obj-$(CONFIG_STM32_IWDG_WATCHDOG) += stm32_iwdg.o obj-$(CONFIG_STPMIC1_WATCHDOG) += stpmic1_wdt.o +obj-$(CONFIG_RN568_WATCHDOG) += rn5t568_wdt.o obj-$(CONFIG_F71808E_WDT) += f71808e_wdt.o obj-$(CONFIG_GPIO_WATCHDOG) += gpio_wdt.o obj-$(CONFIG_ITCO_WDT) += itco_wdt.o
drivers/watchdog/rn5t568_wdt.c new file +146 -0
146 lines not on this page · raw message
Signature · 7 lines
2.30.2 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
Sascha Hauer
AppliedQuoted 6 lines · Juergen Borleis
--- drivers/mfd/Kconfig | 6 ++ drivers/mfd/Makefile | 1 + drivers/mfd/rn5t568.c | 165 ++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 172 insertions(+) create mode 100644 drivers/mfd/rn5t568.c
Applied, thanks
Sascha
Signature · 9 lines
Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox