Skip to contentSkip to conversation

arm: mvebu: Remove comphy_update_map()

PATCH In review Pali Rohár 2 participants 6 messages Jan 18, 2022 – Jan 20, 2022 Generic PHY framework

lore
Share & tools
lore
#0 lore raw

cover arm: mvebu: Remove comphy_update_map()

Convert Turris MOX's comphy_update_map() to board_fix_fdt() and then remove it.

Pali Rohár (2):
arm: mvebu: turris_mox: Convert comphy_update_map() to board_fix_fdt()
phy: marvell: Remove unused function comphy_update_map()

 board/CZ.NIC/turris_mox/turris_mox.c | 48 +++++++++-------------------
 drivers/phy/marvell/comphy_core.c    |  9 ------
 drivers/phy/marvell/comphy_core.h    |  9 ++++++
 include/mvebu/comphy.h               | 11 -------
 4 files changed, 24 insertions(+), 53 deletions(-)
Signature · 1 line
2.20.1
#1 lore raw

PATCH 1/2 arm: mvebu: turris_mox: Convert comphy_update_map() to board_fix_fdt()

Code in board_fix_fdt() already detects connected MOX modules so there is no need to have custom comphy_update_map() function for setting serdes speeds.

This change sets phy-mode for MOX SFP module (when present) to sgmii. Comphy driver then sets sgmii serdes speed for this module to 1.25G.

---
 board/CZ.NIC/turris_mox/turris_mox.c | 48 +++++++++-------------------
 1 file changed, 15 insertions(+), 33 deletions(-)
board/CZ.NIC/turris_mox/turris_mox.c +15 -33
index 3eb5cb425606..f0c5aa6a520b 100644
@@ -21,7 +21,6 @@
 #include <linux/libfdt.h>
 #include <linux/string.h>
 #include <miiphy.h>
-#include <mvebu/comphy.h>
 #include <spi.h>
 
 #include "mox_sp.h"
@@ -49,6 +48,7 @@ int board_fix_fdt(void *blob)
 	enum fdt_status status_pcie, status_eth1;
 	u8 topology[MAX_MOX_MODULES];
 	int i, size, ret;
+	bool eth1_sgmii;
 
 	/*
 	 * SPI driver is not loaded in driver model yet, but we have to find out
@@ -69,6 +69,7 @@ int board_fix_fdt(void *blob)
 
 	status_pcie = FDT_STATUS_DISABLED;
 	status_eth1 = FDT_STATUS_DISABLED;
+	eth1_sgmii = false;
 
 	for (i = 0; i < MAX_MOX_MODULES; ++i) {
 		writel(0x0, ARMADA_37XX_SPI_DOUT);
@@ -82,6 +83,10 @@ int board_fix_fdt(void *blob)
 
 		topology[i] &= 0xf;
 
+		if (topology[i] == MOX_MODULE_SFP &&
+		    status_pcie == FDT_STATUS_DISABLED)
+			eth1_sgmii = true;
+
 		if (topology[i] == MOX_MODULE_SFP ||
 		    topology[i] == MOX_MODULE_TOPAZ ||
 		    topology[i] == MOX_MODULE_PERIDOT)
@@ -98,6 +103,15 @@ int board_fix_fdt(void *blob)
 		printf("Cannot set status for eth1 in U-Boot's device tree: %s!\n",
 		       fdt_strerror(ret));
 
+	if (eth1_sgmii) {
+		ret = fdt_path_offset(blob, "ethernet1");
+		if (ret >= 0)
+			ret = fdt_setprop_string(blob, ret, "phy-mode", "sgmii");
+		if (ret < 0)
+			printf("Cannot set phy-mode for eth1 to sgmii in U-Boot device tree: %s!\n",
+			       fdt_strerror(ret));
+	}
+
 	if (size > 1 && (topology[1] == MOX_MODULE_PCI ||
 			 topology[1] == MOX_MODULE_USB3 ||
 			 topology[1] == MOX_MODULE_PASSPCI))
@@ -199,38 +213,6 @@ static int mox_get_topology(const u8 **ptopology, int *psize, int *pis_sd)
 	return 0;
 }
 
-int comphy_update_map(struct comphy_map *serdes_map, int count)
-{
-	int ret, i, size, sfpindex = -1, swindex = -1;
-	const u8 *topology;
-
-	ret = mox_get_topology(&topology, &size, NULL);
-	if (ret)
-		return ret;
-
-	for (i = 0; i < size; ++i) {
-		if (topology[i] == MOX_MODULE_SFP && sfpindex == -1)
-			sfpindex = i;
-		else if ((topology[i] == MOX_MODULE_TOPAZ ||
-			  topology[i] == MOX_MODULE_PERIDOT) &&
-			 swindex == -1)
-			swindex = i;
-	}
-
-	if (sfpindex >= 0 && swindex >= 0) {
-		if (sfpindex < swindex)
-			serdes_map[0].speed = COMPHY_SPEED_1_25G;
-		else
-			serdes_map[0].speed = COMPHY_SPEED_3_125G;
-	} else if (sfpindex >= 0) {
-		serdes_map[0].speed = COMPHY_SPEED_1_25G;
-	} else if (swindex >= 0) {
-		serdes_map[0].speed = COMPHY_SPEED_3_125G;
-	}
-
-	return 0;
-}
-
 #define SW_SMI_CMD_R(d, r)	(0x9800 | (((d) & 0x1f) << 5) | ((r) & 0x1f))
 #define SW_SMI_CMD_W(d, r)	(0x9400 | (((d) & 0x1f) << 5) | ((r) & 0x1f))
 
Signature · 1 line
2.20.1
Reviewed-by on v1 1/2
#2 lore raw

Re: [PATCH 1/2] arm: mvebu: turris_mox: Convert comphy_update_map() to board_fix_fdt()

Quoted 8 lines · Pali Rohár

Code in board_fix_fdt() already detects connected MOX modules so there is no need to have custom comphy_update_map() function for setting serdes speeds.

This change sets phy-mode for MOX SFP module (when present) to sgmii. Comphy driver then sets sgmii serdes speed for this module to 1.25G.

Thanks,
Stefan

Quoted 89 lines
---
  board/CZ.NIC/turris_mox/turris_mox.c | 48 +++++++++-------------------
  1 file changed, 15 insertions(+), 33 deletions(-)
board/CZ.NIC/turris_mox/turris_mox.c +15 -26
index 3eb5cb425606..f0c5aa6a520b 100644
@@ -21,7 +21,6 @@
  #include <linux/libfdt.h>
  #include <linux/string.h>
  #include <miiphy.h>
-#include <mvebu/comphy.h>
  #include <spi.h>
 
  #include "mox_sp.h"
@@ -49,6 +48,7 @@ int board_fix_fdt(void *blob)
  	enum fdt_status status_pcie, status_eth1;
  	u8 topology[MAX_MOX_MODULES];
  	int i, size, ret;
+	bool eth1_sgmii;
 
  	/*
  	 * SPI driver is not loaded in driver model yet, but we have to find out
@@ -69,6 +69,7 @@ int board_fix_fdt(void *blob)
 
  	status_pcie = FDT_STATUS_DISABLED;
  	status_eth1 = FDT_STATUS_DISABLED;
+	eth1_sgmii = false;
 
  	for (i = 0; i < MAX_MOX_MODULES; ++i) {
  		writel(0x0, ARMADA_37XX_SPI_DOUT);
@@ -82,6 +83,10 @@ int board_fix_fdt(void *blob)
 
  		topology[i] &= 0xf;
 
+		if (topology[i] == MOX_MODULE_SFP &&
+		    status_pcie == FDT_STATUS_DISABLED)
+			eth1_sgmii = true;
+
  		if (topology[i] == MOX_MODULE_SFP ||
  		    topology[i] == MOX_MODULE_TOPAZ ||
  		    topology[i] == MOX_MODULE_PERIDOT)
@@ -98,6 +103,15 @@ int board_fix_fdt(void *blob)
  		printf("Cannot set status for eth1 in U-Boot's device tree: %s!\n",
  		       fdt_strerror(ret));
 
+	if (eth1_sgmii) {
+		ret = fdt_path_offset(blob, "ethernet1");
+		if (ret >= 0)
+			ret = fdt_setprop_string(blob, ret, "phy-mode", "sgmii");
+		if (ret < 0)
+			printf("Cannot set phy-mode for eth1 to sgmii in U-Boot device tree: %s!\n",
+			       fdt_strerror(ret));
+	}
+
  	if (size > 1 && (topology[1] == MOX_MODULE_PCI ||
  			 topology[1] == MOX_MODULE_USB3 ||
  			 topology[1] == MOX_MODULE_PASSPCI))
@@ -199,38 +213,6 @@ static int mox_get_topology(const u8 **ptopology, int *psize, int *pis_sd)
  	return 0;
  }
 
-int comphy_update_map(struct comphy_map *serdes_map, int count)
-{
-	int ret, i, size, sfpindex = -1, swindex = -1;
-	const u8 *topology;
-
-	ret = mox_get_topology(&topology, &size, NULL);
-	if (ret)
-		return ret;
-
-	for (i = 0; i < size; ++i) {
-		if (topology[i] == MOX_MODULE_SFP && sfpindex == -1)
-			sfpindex = i;
-		else if ((topology[i] == MOX_MODULE_TOPAZ ||
-			  topology[i] == MOX_MODULE_PERIDOT) &&
-			 swindex == -1)
-			swindex = i;
-	}
-
-	if (sfpindex >= 0 && swindex >= 0) {
-		if (sfpindex < swindex)
-			serdes_map[0].speed = COMPHY_SPEED_1_25G;
-		else
-			serdes_map[0].speed = COMPHY_SPEED_3_125G;
-	} else if (sfpindex >= 0) {
-		serdes_map[0].speed = COMPHY_SPEED_1_25G;

board/CZ.NIC/turris_mox/turris_mox.c static int mox_get_topology(const u8 **ptopology, int *psize, int *pis_sd) · line 218

Quoted 10 lines
board/CZ.NIC/turris_mox/turris_mox.c +0 -7
-	} else if (swindex >= 0) {
-		serdes_map[0].speed = COMPHY_SPEED_3_125G;
-	}
-
-	return 0;
-}
-
  #define SW_SMI_CMD_R(d, r)	(0x9800 | (((d) & 0x1f) << 5) | ((r) & 0x1f))
  #define SW_SMI_CMD_W(d, r)	(0x9400 | (((d) & 0x1f) << 5) | ((r) & 0x1f))
 

Viele Grüße,
Stefan Roese

Signature · 3 lines
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: [email protected]
#3 lore raw

PATCH 2/2 phy: marvell: Remove unused function comphy_update_map()

In reply to Pali Rohár

This weak function is not used anymore, so completely remove it.

Private struct comphy_map is not used by any board code anymore, so move it into private driver header file comphy_core.h.

---
 drivers/phy/marvell/comphy_core.c |  9 ---------
 drivers/phy/marvell/comphy_core.h |  9 +++++++++
 include/mvebu/comphy.h            | 11 -----------
 3 files changed, 9 insertions(+), 20 deletions(-)
drivers/phy/marvell/comphy_core.c +0 -9
index 233a973035b3..5bb994fe42a5 100644
@@ -79,11 +79,6 @@ int comphy_rx_training(struct udevice *dev, u32 lane)
 	return 0;
 }
 
-__weak int comphy_update_map(struct comphy_map *serdes_map, int count)
-{
-	return 0;
-}
-
 static int comphy_probe(struct udevice *dev)
 {
 	int node = dev_of_offset(dev);
@@ -126,10 +121,6 @@ static int comphy_probe(struct udevice *dev)
 	if (res < 0)
 		return res;
 
-	res = comphy_update_map(chip_cfg->comphy_map_data, chip_cfg->comphy_lanes_count);
-	if (res < 0)
-		return res;
-
 	/* Save CP index for MultiCP devices (A8K) */
 	chip_cfg->cp_index = current_idx++;
 	/* PHY power UP sequence */
drivers/phy/marvell/comphy_core.h +9 -0
index d573776c05ae..f3d049393876 100644
@@ -8,6 +8,7 @@
 
 #include <fdtdec.h>
 #include <mvebu/comphy.h>
+#include <dt-bindings/comphy/comphy_data.h>
 
 #if defined(DEBUG)
 #define debug_enter()	printf("----> Enter %s\n", __func__);
@@ -20,6 +21,14 @@
 #define MAX_LANE_OPTIONS			10
 #define MAX_UTMI_PHY_COUNT			6
 
+struct comphy_map {
+	u32 type;
+	u32 speed;
+	u32 invert;
+	bool clk_src;
+	bool end_point;
+};
+
 struct comphy_mux_options {
 	u32 type;
 	u32 mux_value;
include/mvebu/comphy.h +0 -11
index 4d1b70393b20..14431576e66e 100644
@@ -6,17 +6,6 @@
 #ifndef _MVEBU_COMPHY_H_
 #define _MVEBU_COMPHY_H_
 
-#include <dt-bindings/comphy/comphy_data.h>
-
-struct comphy_map {
-	u32 type;
-	u32 speed;
-	u32 invert;
-	bool clk_src;
-	bool end_point;
-};
-
 int comphy_rx_training(struct udevice *dev, u32 lane);
-int comphy_update_map(struct comphy_map *serdes_map, int count);
 
 #endif /* _MVEBU_COMPHY_H_ */
Signature · 1 line
2.20.1
Reviewed-by on v1 2/2
#4 lore raw

Re: [PATCH 2/2] phy: marvell: Remove unused function comphy_update_map()

Quoted 6 lines · Pali Rohár

This weak function is not used anymore, so completely remove it.

Private struct comphy_map is not used by any board code anymore, so move it into private driver header file comphy_core.h.

Thanks,
Stefan

Quoted 73 lines
---
  drivers/phy/marvell/comphy_core.c |  9 ---------
  drivers/phy/marvell/comphy_core.h |  9 +++++++++
  include/mvebu/comphy.h            | 11 -----------
  3 files changed, 9 insertions(+), 20 deletions(-)
drivers/phy/marvell/comphy_core.c +0 -9
index 233a973035b3..5bb994fe42a5 100644
@@ -79,11 +79,6 @@ int comphy_rx_training(struct udevice *dev, u32 lane)
  	return 0;
  }
 
-__weak int comphy_update_map(struct comphy_map *serdes_map, int count)
-{
-	return 0;
-}
-
  static int comphy_probe(struct udevice *dev)
  {
  	int node = dev_of_offset(dev);
@@ -126,10 +121,6 @@ static int comphy_probe(struct udevice *dev)
  	if (res < 0)
  		return res;
 
-	res = comphy_update_map(chip_cfg->comphy_map_data, chip_cfg->comphy_lanes_count);
-	if (res < 0)
-		return res;
-
  	/* Save CP index for MultiCP devices (A8K) */
  	chip_cfg->cp_index = current_idx++;
  	/* PHY power UP sequence */
drivers/phy/marvell/comphy_core.h +9 -0
index d573776c05ae..f3d049393876 100644
@@ -8,6 +8,7 @@
 
  #include <fdtdec.h>
  #include <mvebu/comphy.h>
+#include <dt-bindings/comphy/comphy_data.h>
 
  #if defined(DEBUG)
  #define debug_enter()	printf("----> Enter %s\n", __func__);
@@ -20,6 +21,14 @@
  #define MAX_LANE_OPTIONS			10
  #define MAX_UTMI_PHY_COUNT			6
 
+struct comphy_map {
+	u32 type;
+	u32 speed;
+	u32 invert;
+	bool clk_src;
+	bool end_point;
+};
+
  struct comphy_mux_options {
  	u32 type;
  	u32 mux_value;
include/mvebu/comphy.h +0 -4
index 4d1b70393b20..14431576e66e 100644
@@ -6,17 +6,6 @@
  #ifndef _MVEBU_COMPHY_H_
  #define _MVEBU_COMPHY_H_
 
-#include <dt-bindings/comphy/comphy_data.h>
-
-struct comphy_map {
-	u32 type;

include/mvebu/comphy.h line 11

Quoted 10 lines
include/mvebu/comphy.h +0 -7
-	u32 speed;
-	u32 invert;
-	bool clk_src;
-	bool end_point;
-};
-
  int comphy_rx_training(struct udevice *dev, u32 lane);
-int comphy_update_map(struct comphy_map *serdes_map, int count);
 
  #endif /* _MVEBU_COMPHY_H_ */

Viele Grüße,
Stefan Roese

Signature · 3 lines
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: [email protected]
#5 lore raw
In reply to Pali Rohár
Quoted 7 lines · Pali Rohár

Convert Turris MOX's comphy_update_map() to board_fix_fdt() and then remove it.

Pali Rohár (2):
arm: mvebu: turris_mox: Convert comphy_update_map() to board_fix_fdt()
phy: marvell: Remove unused function comphy_update_map()

Quoted 6 lines
  board/CZ.NIC/turris_mox/turris_mox.c | 48 +++++++++-------------------
  drivers/phy/marvell/comphy_core.c    |  9 ------
  drivers/phy/marvell/comphy_core.h    |  9 ++++++
  include/mvebu/comphy.h               | 11 -------
  4 files changed, 24 insertions(+), 53 deletions(-)

Applied to u-boot-marvell/master

Thanks,
Stefan