Skip to contentSkip to conversation

powerpc/process, kasan: Silence KASAN warnings in __get_wchan()

PATCH In review He Ying 3 participants 5 messages Jan 19, 2022 – Jun 9, 2022 PowerPC

lore
Share & tools
lore

He Ying

author
#0 lore raw

PATCH 1/1 powerpc/process, kasan: Silence KASAN warnings in __get_wchan()

The following KASAN warning was reported in our kernel.

  BUG: KASAN: stack-out-of-bounds in get_wchan+0x188/0x250
  Read of size 4 at addr d216f958 by task ps/14437

  CPU: 3 PID: 14437 Comm: ps Tainted: G           O      5.10.0 #1
  Call Trace:
  [daa63858] [c0654348] dump_stack+0x9c/0xe4 (unreliable)
  [daa63888] [c035cf0c] print_address_description.constprop.3+0x8c/0x570
  [daa63908] [c035d6bc] kasan_report+0x1ac/0x218
  [daa63948] [c00496e8] get_wchan+0x188/0x250
  [daa63978] [c0461ec8] do_task_stat+0xce8/0xe60
  [daa63b98] [c0455ac8] proc_single_show+0x98/0x170
  [daa63bc8] [c03cab8c] seq_read_iter+0x1ec/0x900
  [daa63c38] [c03cb47c] seq_read+0x1dc/0x290
  [daa63d68] [c037fc94] vfs_read+0x164/0x510
  [daa63ea8] [c03808e4] ksys_read+0x144/0x1d0
  [daa63f38] [c005b1dc] ret_from_syscall+0x0/0x38
  --- interrupt: c00 at 0x8fa8f4
      LR = 0x8fa8cc

  The buggy address belongs to the page:
  page:98ebcdd2 refcount:0 mapcount:0 mapping:00000000 index:0x2 pfn:0x1216f
  flags: 0x0()
  raw: 00000000 00000000 01010122 00000000 00000002 00000000 ffffffff 00000000
  raw: 00000000
  page dumped because: kasan: bad access detected

  Memory state around the buggy address:
   d216f800: 00 00 00 00 00 f1 f1 f1 f1 00 00 00 00 00 00 00
   d216f880: f2 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  >d216f900: 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00
                                            ^
   d216f980: f2 f2 f2 f2 f2 f2 f2 00 00 00 00 00 00 00 00 00
   d216fa00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

After looking into this issue, I find the buggy address belongs to the task stack region. It seems KASAN has something wrong. I look into the code of __get_wchan in x86 architecture and find the same issue has been resolved by the commit f7d27c35ddff ("x86/mm, kasan: Silence KASAN warnings in get_wchan()"). The solution could be applied to powerpc architecture too.

As Andrey Ryabinin said, get_wchan() is racy by design, it may access volatile stack of running task, thus it may access redzone in a stack frame and cause KASAN to warn about this.

Use READ_ONCE_NOCHECK() to silence these warnings.

---
 arch/powerpc/kernel/process.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/powerpc/kernel/process.c +2 -2
index 984813a4d5dc..a75d20f23dac 100644
@@ -2160,12 +2160,12 @@ static unsigned long ___get_wchan(struct task_struct *p)
 		return 0;
 
 	do {
-		sp = *(unsigned long *)sp;
+		sp = READ_ONCE_NOCHECK(*(unsigned long *)sp);
 		if (!validate_sp(sp, p, STACK_FRAME_OVERHEAD) ||
 		    task_is_running(p))
 			return 0;
 		if (count > 0) {
-			ip = ((unsigned long *)sp)[STACK_FRAME_LR_SAVE];
+			ip = READ_ONCE_NOCHECK(((unsigned long *)sp)[STACK_FRAME_LR_SAVE]);
 			if (!in_sched_functions(ip))
 				return ip;
 		}
Signature · 1 line
2.17.1
Reviewed-by on v1 1/1
#1 lore raw
Quoted 43 lines · He Ying

The following KASAN warning was reported in our kernel.

  BUG: KASAN: stack-out-of-bounds in get_wchan+0x188/0x250
  Read of size 4 at addr d216f958 by task ps/14437

  CPU: 3 PID: 14437 Comm: ps Tainted: G           O      5.10.0 #1
  Call Trace:
  [daa63858] [c0654348] dump_stack+0x9c/0xe4 (unreliable)
  [daa63888] [c035cf0c] print_address_description.constprop.3+0x8c/0x570
  [daa63908] [c035d6bc] kasan_report+0x1ac/0x218
  [daa63948] [c00496e8] get_wchan+0x188/0x250
  [daa63978] [c0461ec8] do_task_stat+0xce8/0xe60
  [daa63b98] [c0455ac8] proc_single_show+0x98/0x170
  [daa63bc8] [c03cab8c] seq_read_iter+0x1ec/0x900
  [daa63c38] [c03cb47c] seq_read+0x1dc/0x290
  [daa63d68] [c037fc94] vfs_read+0x164/0x510
  [daa63ea8] [c03808e4] ksys_read+0x144/0x1d0
  [daa63f38] [c005b1dc] ret_from_syscall+0x0/0x38
  --- interrupt: c00 at 0x8fa8f4
      LR = 0x8fa8cc

  The buggy address belongs to the page:
  page:98ebcdd2 refcount:0 mapcount:0 mapping:00000000 index:0x2 pfn:0x1216f
  flags: 0x0()
  raw: 00000000 00000000 01010122 00000000 00000002 00000000 ffffffff 00000000
  raw: 00000000
  page dumped because: kasan: bad access detected

  Memory state around the buggy address:
   d216f800: 00 00 00 00 00 f1 f1 f1 f1 00 00 00 00 00 00 00
   d216f880: f2 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  >d216f900: 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00
                                            ^
   d216f980: f2 f2 f2 f2 f2 f2 f2 00 00 00 00 00 00 00 00 00
   d216fa00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

After looking into this issue, I find the buggy address belongs to the task stack region. It seems KASAN has something wrong. I look into the code of __get_wchan in x86 architecture and find the same issue has been resolved by the commit f7d27c35ddff ("x86/mm, kasan: Silence KASAN warnings in get_wchan()"). The solution could be applied to powerpc architecture too.

Quoted 7 lines

As Andrey Ryabinin said, get_wchan() is racy by design, it may access volatile stack of running task, thus it may access redzone in a stack frame and cause KASAN to warn about this.

Use READ_ONCE_NOCHECK() to silence these warnings.

Looks reasonable to me; thanks!

-Kees

Quoted 26 lines
---
 arch/powerpc/kernel/process.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/powerpc/kernel/process.c +2 -2
index 984813a4d5dc..a75d20f23dac 100644
@@ -2160,12 +2160,12 @@ static unsigned long ___get_wchan(struct task_struct *p)
 		return 0;
 
 	do {
-		sp = *(unsigned long *)sp;
+		sp = READ_ONCE_NOCHECK(*(unsigned long *)sp);
 		if (!validate_sp(sp, p, STACK_FRAME_OVERHEAD) ||
 		    task_is_running(p))
 			return 0;
 		if (count > 0) {
-			ip = ((unsigned long *)sp)[STACK_FRAME_LR_SAVE];
+			ip = READ_ONCE_NOCHECK(((unsigned long *)sp)[STACK_FRAME_LR_SAVE]);
 			if (!in_sched_functions(ip))
 				return ip;
 		}
Signature · 1 line
2.17.1
Signature · 1 line
Kees Cook
author
#2 lore raw

PATCH 1/1 powerpc/process, kasan: Silence KASAN warnings in __get_wchan()

In reply to He Ying

The following KASAN warning was reported in our kernel.

  BUG: KASAN: stack-out-of-bounds in get_wchan+0x188/0x250
  Read of size 4 at addr d216f958 by task ps/14437

  CPU: 3 PID: 14437 Comm: ps Tainted: G           O      5.10.0 #1
  Call Trace:
  [daa63858] [c0654348] dump_stack+0x9c/0xe4 (unreliable)
  [daa63888] [c035cf0c] print_address_description.constprop.3+0x8c/0x570
  [daa63908] [c035d6bc] kasan_report+0x1ac/0x218
  [daa63948] [c00496e8] get_wchan+0x188/0x250
  [daa63978] [c0461ec8] do_task_stat+0xce8/0xe60
  [daa63b98] [c0455ac8] proc_single_show+0x98/0x170
  [daa63bc8] [c03cab8c] seq_read_iter+0x1ec/0x900
  [daa63c38] [c03cb47c] seq_read+0x1dc/0x290
  [daa63d68] [c037fc94] vfs_read+0x164/0x510
  [daa63ea8] [c03808e4] ksys_read+0x144/0x1d0
  [daa63f38] [c005b1dc] ret_from_syscall+0x0/0x38
  --- interrupt: c00 at 0x8fa8f4
      LR = 0x8fa8cc

  The buggy address belongs to the page:
  page:98ebcdd2 refcount:0 mapcount:0 mapping:00000000 index:0x2 pfn:0x1216f
  flags: 0x0()
  raw: 00000000 00000000 01010122 00000000 00000002 00000000 ffffffff 00000000
  raw: 00000000
  page dumped because: kasan: bad access detected

  Memory state around the buggy address:
   d216f800: 00 00 00 00 00 f1 f1 f1 f1 00 00 00 00 00 00 00
   d216f880: f2 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  >d216f900: 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00
                                            ^
   d216f980: f2 f2 f2 f2 f2 f2 f2 00 00 00 00 00 00 00 00 00
   d216fa00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

After looking into this issue, I find the buggy address belongs to the task stack region. It seems KASAN has something wrong. I look into the code of __get_wchan in x86 architecture and find the same issue has been resolved by the commit f7d27c35ddff ("x86/mm, kasan: Silence KASAN warnings in get_wchan()"). The solution could be applied to powerpc architecture too.

As Andrey Ryabinin said, get_wchan() is racy by design, it may access volatile stack of running task, thus it may access redzone in a stack frame and cause KASAN to warn about this.

Use READ_ONCE_NOCHECK() to silence these warnings.

---
Changelog:

v2:
* Add missing Reported-by and SoB tags

---
 arch/powerpc/kernel/process.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/powerpc/kernel/process.c +2 -2
index 984813a4d5dc..a75d20f23dac 100644
@@ -2160,12 +2160,12 @@ static unsigned long ___get_wchan(struct task_struct *p)
 		return 0;
 
 	do {
-		sp = *(unsigned long *)sp;
+		sp = READ_ONCE_NOCHECK(*(unsigned long *)sp);
 		if (!validate_sp(sp, p, STACK_FRAME_OVERHEAD) ||
 		    task_is_running(p))
 			return 0;
 		if (count > 0) {
-			ip = ((unsigned long *)sp)[STACK_FRAME_LR_SAVE];
+			ip = READ_ONCE_NOCHECK(((unsigned long *)sp)[STACK_FRAME_LR_SAVE]);
 			if (!in_sched_functions(ip))
 				return ip;
 		}
Signature · 1 line
2.17.1
author
#3 lore raw

Hi Michael,

Kindly ping. This patch may be missed. Would you please pick it? Or does it need more review?

Quoted 81 lines · He Ying

The following KASAN warning was reported in our kernel.

   BUG: KASAN: stack-out-of-bounds in get_wchan+0x188/0x250
   Read of size 4 at addr d216f958 by task ps/14437

   CPU: 3 PID: 14437 Comm: ps Tainted: G           O      5.10.0 #1
   Call Trace:
   [daa63858] [c0654348] dump_stack+0x9c/0xe4 (unreliable)
   [daa63888] [c035cf0c] print_address_description.constprop.3+0x8c/0x570
   [daa63908] [c035d6bc] kasan_report+0x1ac/0x218
   [daa63948] [c00496e8] get_wchan+0x188/0x250
   [daa63978] [c0461ec8] do_task_stat+0xce8/0xe60
   [daa63b98] [c0455ac8] proc_single_show+0x98/0x170
   [daa63bc8] [c03cab8c] seq_read_iter+0x1ec/0x900
   [daa63c38] [c03cb47c] seq_read+0x1dc/0x290
   [daa63d68] [c037fc94] vfs_read+0x164/0x510
   [daa63ea8] [c03808e4] ksys_read+0x144/0x1d0
   [daa63f38] [c005b1dc] ret_from_syscall+0x0/0x38
   --- interrupt: c00 at 0x8fa8f4
       LR = 0x8fa8cc

   The buggy address belongs to the page:
   page:98ebcdd2 refcount:0 mapcount:0 mapping:00000000 index:0x2 pfn:0x1216f
   flags: 0x0()
   raw: 00000000 00000000 01010122 00000000 00000002 00000000 ffffffff 00000000
   raw: 00000000
   page dumped because: kasan: bad access detected

   Memory state around the buggy address:
    d216f800: 00 00 00 00 00 f1 f1 f1 f1 00 00 00 00 00 00 00
    d216f880: f2 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
   >d216f900: 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00
                                             ^
    d216f980: f2 f2 f2 f2 f2 f2 f2 00 00 00 00 00 00 00 00 00
    d216fa00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

After looking into this issue, I find the buggy address belongs to the task stack region. It seems KASAN has something wrong. I look into the code of __get_wchan in x86 architecture and find the same issue has been resolved by the commit f7d27c35ddff ("x86/mm, kasan: Silence KASAN warnings in get_wchan()"). The solution could be applied to powerpc architecture too.

As Andrey Ryabinin said, get_wchan() is racy by design, it may access volatile stack of running task, thus it may access redzone in a stack frame and cause KASAN to warn about this.

Use READ_ONCE_NOCHECK() to silence these warnings.

---
Changelog:

v2:
* Add missing Reported-by and SoB tags

---
  arch/powerpc/kernel/process.c | 4 ++--
  1 file changed, 2 insertions(+), 2 deletions(-)
arch/powerpc/kernel/process.c +2 -2
index 984813a4d5dc..a75d20f23dac 100644
@@ -2160,12 +2160,12 @@ static unsigned long ___get_wchan(struct task_struct *p)
  		return 0;
 
  	do {
-		sp = *(unsigned long *)sp;
+		sp = READ_ONCE_NOCHECK(*(unsigned long *)sp);
  		if (!validate_sp(sp, p, STACK_FRAME_OVERHEAD) ||
  		    task_is_running(p))
  			return 0;
  		if (count > 0) {
-			ip = ((unsigned long *)sp)[STACK_FRAME_LR_SAVE];
+			ip = READ_ONCE_NOCHECK(((unsigned long *)sp)[STACK_FRAME_LR_SAVE]);
  			if (!in_sched_functions(ip))
  				return ip;
  		}
#4 lore raw
In reply to He Ying
Quoted 21 lines · He Ying

The following KASAN warning was reported in our kernel.

  BUG: KASAN: stack-out-of-bounds in get_wchan+0x188/0x250
  Read of size 4 at addr d216f958 by task ps/14437

  CPU: 3 PID: 14437 Comm: ps Tainted: G           O      5.10.0 #1
  Call Trace:
  [daa63858] [c0654348] dump_stack+0x9c/0xe4 (unreliable)
  [daa63888] [c035cf0c] print_address_description.constprop.3+0x8c/0x570
  [daa63908] [c035d6bc] kasan_report+0x1ac/0x218
  [daa63948] [c00496e8] get_wchan+0x188/0x250
  [daa63978] [c0461ec8] do_task_stat+0xce8/0xe60
  [daa63b98] [c0455ac8] proc_single_show+0x98/0x170
  [daa63bc8] [c03cab8c] seq_read_iter+0x1ec/0x900
  [daa63c38] [c03cb47c] seq_read+0x1dc/0x290
  [daa63d68] [c037fc94] vfs_read+0x164/0x510
  [daa63ea8] [c03808e4] ksys_read+0x144/0x1d0
  [daa63f38] [c005b1dc] ret_from_syscall+0x0/0x38
  --- interrupt: c00 at 0x8fa8f4
      LR = 0x8fa8cc
Quoted 1 line

[...]

Applied to powerpc/fixes.

[1/1] powerpc/process, kasan: Silence KASAN warnings in __get_wchan()

      https://git.kernel.org/powerpc/c/a1b29ba2f2c171b9bea73be993bfdf0a62d37d15

cheers