Skip to contentSkip to conversation

dt-bindings: i2c: stm32-i2c: Move st,syscfg-fmp definition to top level

PATCH Applied Rob Herring 1 participant 2 messages Jan 19, 2022 – Jan 23, 2022

Subsystems (3)
Device tree bindings Arm STM32 I2C subsystem host drivers
lore
Share & tools
lore

Rob Herring

author maintainer
#0 lore raw

PATCH 1/1 dt-bindings: i2c: stm32-i2c: Move st,syscfg-fmp definition to top level

It is preferred to define all properties in the main schema and leave if/then/else schemas to just be further constraints on properties.

Rework the schema to use be more specific for each cell. Previously, multiple entries of 3 cells each was allowed.

Signed-off-by Rob Herring <[email protected]>
---
 .../devicetree/bindings/i2c/st,stm32-i2c.yaml | 24 ++++++++++---------
 1 file changed, 13 insertions(+), 11 deletions(-)
Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml +13 -11
index 46b62e1c9273..dccbb18b6dc0 100644
@@ -25,16 +25,9 @@ allOf:
 
         i2c-scl-falling-time-ns:
           default: 10
-
-        st,syscfg-fmp:
-          description: Use to set Fast Mode Plus bit within SYSCFG when
-                       Fast Mode Plus speed is selected by slave.
-                       Format is phandle to syscfg / register offset within
-                       syscfg / register bitmask for FMP bit.
-          $ref: "/schemas/types.yaml#/definitions/phandle-array"
-          items:
-            minItems: 3
-            maxItems: 3
+    else:
+      properties:
+        st,syscfg-fmp: false
 
   - if:
       properties:

@@ -87,6 +80,16 @@ properties:
     minimum: 1
     maximum: 1000000
 
+  st,syscfg-fmp:
+    description: Use to set Fast Mode Plus bit within SYSCFG when Fast Mode
+      Plus speed is selected by slave.
+    $ref: "/schemas/types.yaml#/definitions/phandle-array"
+    items:
+      - items:
+          - description: phandle to syscfg
+          - description: register offset within syscfg
+          - description: register bitmask for FMP bit
+
 required:
   - compatible
   - reg

@@ -147,4 +150,3 @@ examples:
           i2c-scl-falling-time-ns = <20>;
           st,syscfg-fmp = <&syscfg 0x4 0x2>;
       };
-...
Signature · 1 line
2.32.0
author maintainer Applied
#1 lore raw
Quoted 11 lines · Rob Herring

It is preferred to define all properties in the main schema and leave if/then/else schemas to just be further constraints on properties.

Rework the schema to use be more specific for each cell. Previously, multiple entries of 3 cells each was allowed.

Signed-off-by Rob Herring <[email protected]>
---
 .../devicetree/bindings/i2c/st,stm32-i2c.yaml | 24 ++++++++++---------
 1 file changed, 13 insertions(+), 11 deletions(-)

Applied, thanks!