Skip to contentSkip to conversation

tst_net.sh: Fix for disabled IPv6

RFC PATCH Superseded Petr Vorel 2 participants 5 messages Jan 19, 2022 – Jan 24, 2022

v1 of 3 Superseded Latest is v3 →

lore
Share & tools
lore

Petr Vorel

author
#0 lore raw

cover tst_net.sh: Fix for disabled IPv6

Hi,

not elegant, but working.
Meant to be merged after release.

We could allow user to disable IPv6 even supported with variable (might be useful for debugging).

Kind regards,
Petr

Petr Vorel (2):
tst_net.sh: Fix for disabled IPv6 broken_ip-nexthdr.sh: Check IPv6 support before forcing it

 testcases/lib/tst_net.sh                      | 66 +++++++++++++++----
 .../stress/broken_ip/broken_ip-nexthdr.sh     |  1 +
 2 files changed, 56 insertions(+), 11 deletions(-)
Signature · 5 lines
2.34.1


-- 
Mailing list info: https://lists.linux.it/listinfo/ltp
author
#1 lore raw

RFC PATCH 1/2 tst_net.sh: Fix for disabled IPv6

Tests failed in tst_init_iface even IPv4 only test was run. Allow to init interfaces at least for IPv4.

Tests which use TST_IPV6=6 needs to be fixed (unless they use just tst_ipaddr_un()).

---
 testcases/lib/tst_net.sh | 66 +++++++++++++++++++++++++++++++++-------
 1 file changed, 55 insertions(+), 11 deletions(-)
testcases/lib/tst_net.sh +55 -11
index 4dc0fca926..df16e12a26 100644
@@ -24,7 +24,9 @@ TST_IPV6_FLAG=${TST_IPV6_FLAG:-}
 tst_net_parse_args()
 {
 	case $1 in
-	6) TST_IPV6=6 TST_IPVER=6 TST_IPV6_FLAG="-6";;
+	6)  tst_net_require_ipv6
+		TST_IPV6=6 TST_IPVER=6 TST_IPV6_FLAG="-6"
+		;;
 	*) [ "$TST_PARSE_ARGS_CALLER" ] && $TST_PARSE_ARGS_CALLER "$1" "$2";;
 	esac
 }
@@ -100,6 +102,30 @@ tst_brk_()
 	[ -z "$TST_USE_LEGACY_API" ] && tst_brk $@ || tst_brkm $@
 }
 
+tst_net_detect_ipv6()
+{
+	local type="${1:-lhost}"
+	local cmd='[ -f /proc/net/if_inet6 ]'
+
+	if [ "$type" = "lhost" ]; then
+		$cmd
+		return $?
+	fi
+
+	tst_rhost_run -c "$cmd"
+	return $?
+}
+
+tst_net_require_ipv6()
+{
+	local err="IPv6 not supported on:"
+	local missing
+
+	tst_net_detect_ipv6 || missing=" lhost"
+	tst_net_detect_ipv6 rhost || missing="$missing rhost"
+	[ -z "$missing" ] || tst_brk_ TCONF "$err$missing"
+}
+
 init_ltp_netspace()
 {
 	local pid
@@ -517,7 +543,9 @@ tst_init_iface()
 		ip link set $iface down || return $?
 		ip route flush dev $iface || return $?
 		ip addr flush dev $iface || return $?
-		sysctl -qw net.ipv6.conf.$iface.accept_dad=0 || return $?
+		if tst_net_detect_ipv6; then
+			sysctl -qw net.ipv6.conf.$iface.accept_dad=0 || return $?
+		fi
 		ip link set $iface up
 		return $?
 	fi
@@ -529,7 +557,9 @@ tst_init_iface()
 	tst_rhost_run -c "ip link set $iface down" || return $?
 	tst_rhost_run -c "ip route flush dev $iface" || return $?
 	tst_rhost_run -c "ip addr flush dev $iface" || return $?
-	tst_rhost_run -c "sysctl -qw net.ipv6.conf.$iface.accept_dad=0" || return $?
+	if tst_net_detect_ipv6 rhost; then
+		tst_rhost_run -c "sysctl -qw net.ipv6.conf.$iface.accept_dad=0" || return $?
+	fi
 	tst_rhost_run -c "ip link set $iface up"
 }
 
@@ -606,7 +636,9 @@ tst_restore_ipaddr()
 	local ret=0
 	local backup_tst_ipv6=$TST_IPV6
 	TST_IPV6= tst_add_ipaddr $type $link_num || ret=$?
-	TST_IPV6=6 tst_add_ipaddr $type $link_num || ret=$?
+	if tst_net_detect_ipv6; then
+		TST_IPV6=6 tst_add_ipaddr $type $link_num || ret=$?
+	fi
 	TST_IPV6=$backup_tst_ipv6
 
 	return $ret
@@ -971,8 +1003,10 @@ IPV6_RHOST="${IPV6_RHOST:-fd00:1:1:1::1/64}"
 if [ -z "$_tst_net_parse_variables" ]; then
 	eval $(tst_net_ip_prefix $IPV4_LHOST || echo "exit $?")
 	eval $(tst_net_ip_prefix -r $IPV4_RHOST || echo "exit $?")
-	eval $(tst_net_ip_prefix $IPV6_LHOST || echo "exit $?")
-	eval $(tst_net_ip_prefix -r $IPV6_RHOST || echo "exit $?")
+	if tst_net_detect_ipv6; then
+		eval $(tst_net_ip_prefix $IPV6_LHOST || echo "exit $?")
+		eval $(tst_net_ip_prefix -r $IPV6_RHOST || echo "exit $?")
+	fi
 fi
 
 [ -n "$TST_USE_NETNS" -a "$TST_INIT_NETNS" != "no" ] && init_ltp_netspace
@@ -981,19 +1015,29 @@ if [ -z "$_tst_net_parse_variables" ]; then
 	eval $(tst_net_iface_prefix $IPV4_LHOST || echo "exit $?")
 	eval $(tst_rhost_run -c 'tst_net_iface_prefix -r '$IPV4_RHOST \
 		|| echo "exit $?")
-	eval $(tst_net_iface_prefix $IPV6_LHOST || echo "exit $?")
-	eval $(tst_rhost_run -c 'tst_net_iface_prefix -r '$IPV6_RHOST \
-		|| echo "exit $?")
+
+	if tst_net_detect_ipv6; then
+		eval $(tst_net_iface_prefix $IPV6_LHOST || echo "exit $?")
+	fi
+
+	if tst_net_detect_ipv6 rhost; then
+		eval $(tst_rhost_run -c 'tst_net_iface_prefix -r '$IPV6_RHOST \
+			|| echo "exit $?")
+	fi
 
 	eval $(tst_net_vars $IPV4_LHOST/$IPV4_LPREFIX \
 		$IPV4_RHOST/$IPV4_RPREFIX || echo "exit $?")
-	eval $(tst_net_vars $IPV6_LHOST/$IPV6_LPREFIX \
-		$IPV6_RHOST/$IPV6_RPREFIX || echo "exit $?")
+
+	if tst_net_detect_ipv6; then
+		eval $(tst_net_vars $IPV6_LHOST/$IPV6_LPREFIX \
+			$IPV6_RHOST/$IPV6_RPREFIX || echo "exit $?")
+	fi
 
 	tst_res_ TINFO "Network config (local -- remote):"
 	tst_res_ TINFO "$LHOST_IFACES -- $RHOST_IFACES"
 	tst_res_ TINFO "$IPV4_LHOST/$IPV4_LPREFIX -- $IPV4_RHOST/$IPV4_RPREFIX"
 	tst_res_ TINFO "$IPV6_LHOST/$IPV6_LPREFIX -- $IPV6_RHOST/$IPV6_RPREFIX"
+
 	export _tst_net_parse_variables="yes"
 fi
 
Signature · 5 lines
2.34.1


-- 
Mailing list info: https://lists.linux.it/listinfo/ltp
#2 lore raw

Hi,

Quoted 33 lines · Petr Vorel

Tests failed in tst_init_iface even IPv4 only test was run. Allow to init interfaces at least for IPv4.

Tests which use TST_IPV6=6 needs to be fixed (unless they use just tst_ipaddr_un()).

---
 testcases/lib/tst_net.sh | 66 +++++++++++++++++++++++++++++++++-------
 1 file changed, 55 insertions(+), 11 deletions(-)
testcases/lib/tst_net.sh +6 -1
index 4dc0fca926..df16e12a26 100644
@@ -24,7 +24,9 @@ TST_IPV6_FLAG=${TST_IPV6_FLAG:-}
 tst_net_parse_args()
 {
 	case $1 in
-	6) TST_IPV6=6 TST_IPVER=6 TST_IPV6_FLAG="-6";;
+	6)  tst_net_require_ipv6
+		TST_IPV6=6 TST_IPVER=6 TST_IPV6_FLAG="-6"
+		;;
 	*) [ "$TST_PARSE_ARGS_CALLER" ] && $TST_PARSE_ARGS_CALLER "$1" "$2";;
 	esac
 }
@@ -100,6 +102,30 @@ tst_brk_()
 	[ -z "$TST_USE_LEGACY_API" ] && tst_brk $@ || tst_brkm $@
 }
 
+tst_net_detect_ipv6()
+{
+	local type="${1:-lhost}"

testcases/lib/tst_net.sh tst_brk_() · line 117

Quoted 10 lines
testcases/lib/tst_net.sh +10 -0
+	local cmd='[ -f /proc/net/if_inet6 ]'
+
+	if [ "$type" = "lhost" ]; then
+		$cmd
+		return $?
+	fi
+
+	tst_rhost_run -c "$cmd"
+	return $?
+}

tst_net_detect_ipv6() should probably run each check only once and cache the result. The function is called multiple times and tst_rhost_run() could be quite slow if the remote side is on a different physical machine.

Signature · 10 lines
Martin Doucha   [email protected]
QA Engineer for Software Maintenance
SUSE LINUX, s.r.o.
CORSO IIa
Krizikova 148/34
186 00 Prague 8
Czech Republic

-- 
Mailing list info: https://lists.linux.it/listinfo/ltp
author
#3 lore raw

Hi Martin,

Quoted 3 lines

tst_net_detect_ipv6() should probably run each check only once and cache the result. The function is called multiple times and tst_rhost_run() could be quite slow if the remote side is on a different physical machine.

You're right, ssh result needs to be cached. Thanks for a review!

Kind regards,
Petr

Signature · 1 line
Mailing list info: https://lists.linux.it/listinfo/ltp
author
#4 lore raw

RFC PATCH 2/2 broken_ip-nexthdr.sh: Check IPv6 support before forcing it

In reply to Petr Vorel
---
 testcases/network/stress/broken_ip/broken_ip-nexthdr.sh | 1 +
 1 file changed, 1 insertion(+)
testcases/network/stress/broken_ip/broken_ip-nexthdr.sh +1 -0
index ec6643af66..cb4a3dd399 100755
@@ -11,6 +11,7 @@ TST_TESTFUNC="do_test"
 do_test()
 {
 	# not supported on IPv4
+	tst_net_require_ipv6
 	TST_IPV6=6
 	TST_IPVER=6
 
Signature · 5 lines
2.34.1


-- 
Mailing list info: https://lists.linux.it/listinfo/ltp