Skip to contentSkip to conversation

xfs/107: fix formatting failures

PATCH In review Darrick J. Wong 2 participants 2 messages Jan 20, 2022 – Jan 21, 2022

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 xfs/107: fix formatting failures

From: Darrick J. Wong <[email protected]>

Zorro Lang reported that the _scratch_mkfs_sized call in the new xfs/107 fstest sometimes fails on more exotic storage due to insufficient log
size on account of raid stripes, etc. These are side effects of the
filesystem being too small.

Change the filesystem size to 256M to avoid these problems, and change the allocstale parameters to use the same file size (16M) as before. Given that ALLOCSP produces stale disk contents pretty quickly this shouldn't affect the test runtime too much.

---
 tests/xfs/107 |   10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)
tests/xfs/107 +7 -3
index 6034dbc2..577094b2 100755
@@ -22,7 +22,10 @@ _require_test
 _require_scratch
 _require_test_program allocstale
 
-size_mb=32
+# Create a 256MB filesystem to avoid running into mkfs problems with too-small
+# filesystems.
+size_mb=256
+
 # Write a known pattern to the disk so that we can detect stale disk blocks
 # being mapped into the file.  In the test author's experience, the bug will
 # reproduce within the first 500KB's worth of ALLOCSP calls, so running up
@@ -39,9 +42,10 @@ _scratch_mount
 _xfs_force_bdev data $SCRATCH_MNT
 testfile=$SCRATCH_MNT/a
 
-# Allow the test program to expand the file to consume half the free space.
+# Allow the test program to expand the file to 32MB.  If we can't find any
+# stale blocks at that point, the kernel has probably been patched.
 blksz=$(_get_file_block_size $SCRATCH_MNT)
-iterations=$(( (size_mb / 2) * 1048576 / blksz))
+iterations=$(( (size_mb / 16) * 1048576 / blksz))
 echo "Setting up $iterations runs for block size $blksz" >> $seqres.full
 
 # Run reproducer program and dump file contents if we see stale data.  Full
Reviewed-by on v1 1/1
#1 lore raw
Quoted 7 lines · Darrick J. Wong

From: Darrick J. Wong <[email protected]>

Zorro Lang reported that the _scratch_mkfs_sized call in the new xfs/107 fstest sometimes fails on more exotic storage due to insufficient log
size on account of raid stripes, etc. These are side effects of the
filesystem being too small.

Quoted 8 lines

Change the filesystem size to 256M to avoid these problems, and change the allocstale parameters to use the same file size (16M) as before. Given that ALLOCSP produces stale disk contents pretty quickly this shouldn't affect the test runtime too much.

---

Oh, I didn't notice that the xfs/107 has been merged :-P This patch is good to me, and it fixes two "data/log space too small" issues on my side.

Quoted 33 lines
 tests/xfs/107 |   10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)
tests/xfs/107 +7 -3
index 6034dbc2..577094b2 100755
@@ -22,7 +22,10 @@ _require_test
 _require_scratch
 _require_test_program allocstale
 
-size_mb=32
+# Create a 256MB filesystem to avoid running into mkfs problems with too-small
+# filesystems.
+size_mb=256
+
 # Write a known pattern to the disk so that we can detect stale disk blocks
 # being mapped into the file.  In the test author's experience, the bug will
 # reproduce within the first 500KB's worth of ALLOCSP calls, so running up
@@ -39,9 +42,10 @@ _scratch_mount
 _xfs_force_bdev data $SCRATCH_MNT
 testfile=$SCRATCH_MNT/a
 
-# Allow the test program to expand the file to consume half the free space.
+# Allow the test program to expand the file to 32MB.  If we can't find any
+# stale blocks at that point, the kernel has probably been patched.
 blksz=$(_get_file_block_size $SCRATCH_MNT)
-iterations=$(( (size_mb / 2) * 1048576 / blksz))
+iterations=$(( (size_mb / 16) * 1048576 / blksz))
 echo "Setting up $iterations runs for block size $blksz" >> $seqres.full
 
 # Run reproducer program and dump file contents if we see stale data.  Full