clk: meson: add a sub EMMC clock controller support
Subsystems (4)
v10 cover clk: meson: add a sub EMMC clock controller support
This driver will add a MMC clock controller driver support. The original idea about adding a clock controller is during the discussion in the NAND driver mainline effort[1].
This driver is tested in the S400 board (AXG platform) with NAND driver.
Changes since v9 [10]
- use clk_parent_data instead of parent_names
Changes since v8 [9]
- use MESON_SCLK_ONE_BASED instead of CLK_DIVIDER_ONE_BASED
- use struct_size to caculate onecell_data
- add clk-phase-delay.h
- define CLK_DELAY_STEP_PS_GX and CLK_DELAY_STEP_PS_AXG
Changes since v7 [8]
- move meson_clk_get_phase_delay_data() from header to driver
- CONFIG sclk-div with COMMON_CLK_AMLOGIC instead of COMMON_CLK_AMLOGIC_AUDIO
- remove onecell date and ID for internal MUX clk
- use helper for functions for ONE_BASED in sclk-div
- add ONE_BASED support for duty cycle
Changes since v6 [7]:
- add one based support for sclk divier
- alloc sclk in probe for multiple instance
- fix coding styles
Changes since v5 [6]:
- remove divider ops with .init and use sclk_div instead
- drop CLK_DIVIDER_ROUND_CLOSEST in mux and div
- drop the useless type cast
Changes since v4 [5]:
- use struct parm in phase delay driver
- remove 0 delay releted part in phase delay driver
- don't rebuild the parent name once again
- add divider ops with .init
Changes since v3 [4]:
- separate clk-phase-delay driver
- replace clk_get_rate() with clk_hw_get_rate()
- collect Rob's R-Y
- drop 'meson-' prefix from compatible string
Changes since v2 [3]:
- squash dt-binding clock-id patch
- update license
- fix alignment
- construct a clk register helper() function
Changes since v1 [2]:
- implement phase clock
- update compatible name
- adjust file name
- divider probe() into small functions, and re-use them
[1] https://lkml.kernel.org/r/20180628090034.0637a062@xps13
[2] https://lkml.kernel.org/r/[email protected]
[3] https://lkml.kernel.org/r/[email protected]
[4] https://lkml.kernel.org/r/[email protected]
[5] https://lkml.kernel.org/r/[email protected]
[6] https://lkml.kernel.org/r/[email protected]
[7] https://lkml.kernel.org/r/[email protected]
[8] https://lkml.kernel.org/r/[email protected]
[9] https://lkml.kernel.org/r/[email protected]
[10] https://lore.kernel.org/all/[email protected]/
Liang Yang (4):
clk: meson: add one based divider support for sclk
clk: meson: add emmc sub clock phase delay driver
clk: meson: add DT documentation for emmc clock controller
clk: meson: add sub MMC clock controller driver
.../bindings/clock/amlogic,mmc-clkc.yaml | 64 ++++ drivers/clk/meson/Kconfig | 18 ++ drivers/clk/meson/Makefile | 2 + drivers/clk/meson/clk-phase-delay.c | 69 ++++ drivers/clk/meson/clk-phase-delay.h | 20 ++ drivers/clk/meson/mmc-clkc.c | 302 ++++++++++++++++++ drivers/clk/meson/sclk-div.c | 59 ++-- drivers/clk/meson/sclk-div.h | 3 + include/dt-bindings/clock/amlogic,mmc-clkc.h | 14 + 9 files changed, 529 insertions(+), 22 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/amlogic,mmc-clkc.yaml create mode 100644 drivers/clk/meson/clk-phase-delay.c create mode 100644 drivers/clk/meson/clk-phase-delay.h create mode 100644 drivers/clk/meson/mmc-clkc.c create mode 100644 include/dt-bindings/clock/amlogic,mmc-clkc.h
Signature · 1 line
2.34.1
PATCH v10 1/4 clk: meson: add one based divider support for sclk
When MESON_SCLK_ONE_BASED flag is set, the sclk divider will be:
one based divider (div = val), and zero value gates the clock
--- drivers/clk/meson/sclk-div.c | 59 ++++++++++++++++++++++-------------- drivers/clk/meson/sclk-div.h | 3 ++ 2 files changed, 40 insertions(+), 22 deletions(-)
drivers/clk/meson/sclk-div.c +37 -22
@@ -4,16 +4,17 @@* Author: Jerome Brunet <[email protected]> * * Sample clock generator divider: -* This HW divider gates with value 0 but is otherwise a zero based divider: +* This HW divider gates with value 0: * * val >= 1 -* divider = val + 1 +* divider = val + 1 if ONE_BASED is not set, otherwise divider = val. * * The duty cycle may also be set for the LR clock variant. The duty cycle * ratio is: * * hi = [0 - val] -* duty_cycle = (1 + hi) / (1 + val) +* duty_cycle = (1 + hi) / (1 + val) if ONE_BASED is not set, otherwise: +* duty_cycle = hi / (1 + val) */ #include <linux/clk-provider.h>
@@ -28,22 +29,37 @@ meson_sclk_div_data(struct clk_regmap *clk)return (struct meson_sclk_div_data *)clk->data; } -static int sclk_div_maxval (struct meson_sclk_div_data *sclk) +static inline int sclk_get_reg (int val,unsigned char flag) { -return (1 << sclk->div.width) -1 ; +if ((flag &MESON_SCLK_ONE_BASED ) || !val) +return val; +return val -1 ; +} + +static inline int sclk_get_divider (int reg,unsigned char flag) +{ +if (flag &MESON_SCLK_ONE_BASED ) +return reg; +return reg +1 ; }static int sclk_div_maxdiv (struct meson_sclk_div_data *sclk) { -return sclk_div_maxval (sclk) +1 ; +unsigned int reg = (1 << sclk->div.width) -1 ; + +return sclk_get_divider (reg, sclk->flags); }static int sclk_div_getdiv (struct clk_hw *hw,unsigned long rate, -unsigned long prate,int maxdiv) +unsigned long prate) {int div =DIV_ROUND_CLOSEST_ULL ((u64 )prate, rate); +struct clk_regmap *clk =to_clk_regmap (hw); +struct meson_sclk_div_data *sclk =meson_sclk_div_data (clk); +int mindiv =sclk_get_divider (1 , sclk->flags); +int maxdiv =sclk_div_maxdiv (sclk); -return clamp (div,2 , maxdiv); +return clamp (div, mindiv, maxdiv); } static int sclk_div_bestdiv(struct clk_hw *hw, unsigned long rate,
@@ -51,25 +67,25 @@ static int sclk_div_bestdiv(struct clk_hw *hw, unsigned long rate, struct meson_sclk_div_data *sclk) {struct clk_hw *parent =clk_hw_get_parent (hw); -int bestdiv =0 , i; +int bestdiv =0 , i, mindiv;unsigned long maxdiv, now, parent_now;unsigned long best =0 , best_parent =0 ;if (!rate) rate =1 ; - maxdiv =sclk_div_maxdiv (sclk); -if (!(clk_hw_get_flags (hw) &CLK_SET_RATE_PARENT )) -return sclk_div_getdiv (hw, rate, *prate, maxdiv); +return sclk_div_getdiv (hw, rate, *prate);/* * The maximum divider we can use without overflowing * unsigned long in rate * i below */ + maxdiv =sclk_div_maxdiv (sclk); maxdiv =min (ULONG_MAX / rate, maxdiv); + mindiv =sclk_get_divider (1 , sclk->flags); -for (i =2 ; i <= maxdiv; i++) { +for (i = mindiv; i <= maxdiv; i++) {/* * It's the most ideal case if the requested rate can be * divided from parent clock without needing to change
@@ -115,10 +131,7 @@ static void sclk_apply_ratio(struct clk_regmap *clk, sclk->cached_duty.num, sclk->cached_duty.den); -if (hi) - hi -=1 ; - -meson_parm_write (clk->map, &sclk->hi, hi); +meson_parm_write (clk->map, &sclk->hi,sclk_get_reg (hi, sclk->flags)); } static int sclk_div_set_duty_cycle(struct clk_hw *hw,
@@ -149,7 +162,7 @@ static int sclk_div_get_duty_cycle(struct clk_hw *hw, } hi =meson_parm_read (clk->map, &sclk->hi); - duty->num = hi +1 ; + duty->num =sclk_get_divider (hi, sclk->flags); duty->den = sclk->cached_div;return 0 ; }
@@ -157,10 +170,13 @@ static int sclk_div_get_duty_cycle(struct clk_hw *hw,static void sclk_apply_divider (struct clk_regmap *clk,struct meson_sclk_div_data *sclk) { +unsigned int div; +if (MESON_PARM_APPLICABLE (&sclk->hi))sclk_apply_ratio (clk, sclk); -meson_parm_write (clk->map, &sclk->div, sclk->cached_div -1 ); + div =sclk_get_reg (sclk->cached_div, sclk->flags); +meson_parm_write (clk->map, &sclk->div, div); } static int sclk_div_set_rate(struct clk_hw *hw, unsigned long rate,
@@ -168,9 +184,8 @@ static int sclk_div_set_rate(struct clk_hw *hw, unsigned long rate, {struct clk_regmap *clk =to_clk_regmap (hw);struct meson_sclk_div_data *sclk =meson_sclk_div_data (clk); -unsigned long maxdiv =sclk_div_maxdiv (sclk); - sclk->cached_div =sclk_div_getdiv (hw, rate, prate, maxdiv); + sclk->cached_div =sclk_div_getdiv (hw, rate, prate);if (clk_hw_is_enabled (hw))sclk_apply_divider (clk, sclk);
@@ -228,7 +243,7 @@ static int sclk_div_init(struct clk_hw *hw)if (!val) sclk->cached_div =sclk_div_maxdiv (sclk);else - sclk->cached_div = val +1 ; + sclk->cached_div =sclk_get_divider (val, sclk->flags);sclk_div_get_duty_cycle (hw, &sclk->cached_duty);
drivers/clk/meson/sclk-div.h +3 -0
@@ -10,11 +10,14 @@#include <linux/clk-provider.h> #include "parm.h" +#define MESON_SCLK_ONE_BASED BIT(0) +struct meson_sclk_div_data {struct parm div;struct parm hi;unsigned int cached_div;struct clk_duty cached_duty; +u8 flags; };extern const struct clk_ops meson_sclk_div_ops;
Signature · 1 line
2.34.1
PATCH v10 2/4 clk: meson: add emmc sub clock phase delay driver
In reply to Liang YangExport the emmc sub clock phase delay ops which will be used by the emmc sub clock driver itself.
--- drivers/clk/meson/Kconfig | 4 ++ drivers/clk/meson/Makefile | 1 + drivers/clk/meson/clk-phase-delay.c | 69 +++++++++++++++++++++++++++++ drivers/clk/meson/clk-phase-delay.h | 20 +++++++++ 4 files changed, 94 insertions(+) create mode 100644 drivers/clk/meson/clk-phase-delay.c create mode 100644 drivers/clk/meson/clk-phase-delay.h
drivers/clk/meson/Kconfig +4 -0
@@ -18,6 +18,10 @@ config COMMON_CLK_MESON_PHASE tristate select COMMON_CLK_MESON_REGMAP +config COMMON_CLK_MESON_PHASE_DELAY + tristate + select COMMON_CLK_MESON_REGMAP + config COMMON_CLK_MESON_PLL tristate select COMMON_CLK_MESON_REGMAP
drivers/clk/meson/Makefile +1 -0
@@ -9,6 +9,7 @@ obj-$(CONFIG_COMMON_CLK_MESON_MPLL) += clk-mpll.o obj-$(CONFIG_COMMON_CLK_MESON_PHASE) += clk-phase.o obj-$(CONFIG_COMMON_CLK_MESON_PLL) += clk-pll.o obj-$(CONFIG_COMMON_CLK_MESON_REGMAP) += clk-regmap.o +obj-$(CONFIG_COMMON_CLK_MESON_PHASE_DELAY) += clk-phase-delay.o obj-$(CONFIG_COMMON_CLK_MESON_SCLK_DIV) += sclk-div.o obj-$(CONFIG_COMMON_CLK_MESON_VID_PLL_DIV) += vid-pll-div.o
drivers/clk/meson/clk-phase-delay.c new file +69 -0
69 lines not on this page · raw message
drivers/clk/meson/clk-phase-delay.h new file +20 -0
@@ -0,0 +1,20 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ +/* +* Copyright (c) 2019 Amlogic, Inc. All rights reserved. +*/ + +#ifndef __MESON_CLK_PHASE_DELAY_H +#define __MESON_CLK_PHASE_DELAY_H + +#include <linux/clk-provider.h> +#include "parm.h" + +struct meson_clk_phase_delay_data { +struct parm phase; +struct parm delay; +unsigned int delay_step_ps; +}; + +extern const struct clk_ops meson_clk_phase_delay_ops; + +#endif /* __MESON_CLK_PHASE_DELAY_H */
Signature · 1 line
2.34.1
PATCH v10 3/4 clk: meson: add DT documentation for emmc clock controller
In reply to Liang YangDocument the MMC sub clock controller driver, the potential consumer of this driver is MMC or NAND. Also add four clock bindings IDs which provided by this driver.
--- .../bindings/clock/amlogic,mmc-clkc.yaml | 64 +++++++++++++++++++ include/dt-bindings/clock/amlogic,mmc-clkc.h | 14 ++++ 2 files changed, 78 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/amlogic,mmc-clkc.yaml create mode 100644 include/dt-bindings/clock/amlogic,mmc-clkc.h
Documentation/devicetree/bindings/clock/amlogic,mmc-clkc.yaml new file +64 -0
@@ -0,0 +1,64 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/amlogic,mmc-clkc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic MMC Sub Clock Controller Driver Device Tree Bindings + +maintainers: + - [email protected] + - [email protected] + +properties: + compatible: + enum: + - "amlogic,axg-mmc-clkc", "syscon" + - "amlogic,gx-mmc-clkc", "syscon" + + reg: + maxItems: 1 + + clocks: + maxItems: 2 + + clock-names: + items: + - const: "clkin0", "clkin1" + + "#clock-cells": + const: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - "#clock-cells" + +additionalProperties: false + +examples: + - | + sd_mmc_c_clkc: clock-controller@7000 { + compatible = "amlogic,axg-mmc-clkc", "syscon"; + reg = <0x0 0x7000 0x0 0x4>; + #clock-cells = <1>; + + clock-names = "clkin0", "clkin1"; + clocks = <&clkc CLKID_SD_EMMC_C_CLK0>, + <&clkc CLKID_FCLK_DIV2>; + }; + + - | + sd_emmc_b_clkc: clock-controller@5000 { + compatible = "amlogic,axg-mmc-clkc", "syscon"; + reg = <0x0 0x5000 0x0 0x4>; + + #clock-cells = <1>; + clock-names = "clkin0", "clkin1"; + clocks = <&clkc CLKID_SD_EMMC_B_CLK0>, + <&clkc CLKID_FCLK_DIV2>; + }; + +...
include/dt-bindings/clock/amlogic,mmc-clkc.h new file +14 -0
@@ -0,0 +1,14 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ +/* +* Copyright (c) 2019 Amlogic, Inc. All rights reserved. +*/ + +#ifndef __MMC_CLKC_H +#define __MMC_CLKC_H + +#define CLKID_MMC_DIV 0 +#define CLKID_MMC_PHASE_CORE 1 +#define CLKID_MMC_PHASE_TX 2 +#define CLKID_MMC_PHASE_RX 3 + +#endif
Signature · 1 line
2.34.1
PATCH v10 4/4 clk: meson: add sub MMC clock controller driver
In reply to Liang YangThe patch will add a MMC clock controller driver which used by MMC or NAND, It provide a mux and divider clock, and three phase clocks - core, tx, tx.
Two clocks are provided as the parent of MMC clock controller from upper layer clock controller - eg "amlogic,axg-clkc" in AXG platform.
To specify which clock the MMC or NAND driver may consume,
the preprocessor macros in the dt-bindings/clock/amlogic,mmc-clkc.h header can be used in the device tree sources.
--- drivers/clk/meson/Kconfig | 14 ++ drivers/clk/meson/Makefile | 1 + drivers/clk/meson/mmc-clkc.c | 302 +++++++++++++++++++++++++++++++++++ 3 files changed, 317 insertions(+) create mode 100644 drivers/clk/meson/mmc-clkc.c
drivers/clk/meson/Kconfig +14 -0
@@ -39,6 +39,20 @@ config COMMON_CLK_MESON_AO_CLKC select COMMON_CLK_MESON_REGMAP select RESET_CONTROLLER +config COMMON_CLK_MMC_MESON + tristate "Meson MMC Sub Clock Controller Driver" + depends on ARCH_MESON || COMPILE_TEST + select MFD_SYSCON + select COMMON_CLK_AMLOGIC + select COMMON_CLK_MESON_PHASE + select COMMON_CLK_MESON_PHASE_DELAY + select COMMON_CLK_MESON_SCLK_DIV + help + Support for the MMC sub clock controller on + Amlogic Meson Platform, which includes S905 (GXBB, GXL), + A113D/X (AXG) devices. Say Y if you want this + clock enabled. + config COMMON_CLK_MESON_EE_CLKC tristate select COMMON_CLK_MESON_REGMAP
drivers/clk/meson/Makefile +1 -0
@@ -17,6 +17,7 @@ obj-$(CONFIG_COMMON_CLK_MESON_VID_PLL_DIV) += vid-pll-div.o obj-$(CONFIG_COMMON_CLK_AXG) += axg.o axg-aoclk.o obj-$(CONFIG_COMMON_CLK_AXG_AUDIO) += axg-audio.o +obj-$(CONFIG_COMMON_CLK_MMC_MESON) += mmc-clkc.o obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o obj-$(CONFIG_COMMON_CLK_G12A) += g12a.o g12a-aoclk.o obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o meson8-ddr.o
drivers/clk/meson/mmc-clkc.c new file +302 -0
302 lines not on this page · raw message
Signature · 1 line
2.34.1
Hi Liang,
Quoted 5 lines · Liang Yang
This driver will add a MMC clock controller driver support. The original idea about adding a clock controller is during the discussion in the NAND driver mainline effort[1].
This driver is tested in the S400 board (AXG platform) with NAND driver.
Thanks a lot for providing a fixed and updated version of this serie.
After some chat with Jerome and Kevin, it seems the way the eMMC clock reuse for NAND was designed nearly 4 years doesn't look accurate anymore.
Having a separate clk driver designed to replace the eMMC node when NAND is used on the board seems over engineered.
Actually having the clock code you add in this serie _but_ directly in the NAND looks far better, and more coherent since having Linux runtime detection of eMMC vs NAND will never happen and even this serie required some DT modification from the bootloader.
I'll let Jerome or Kevin add more details if they want, but I think you should resurrect the work you pushed in [1] & [2] but:
- passing the eMMC clk registers as a third "reg" cell
- passing the same "clocks" phandle as the eMMC node
- adding the eMMC clock code in the NAND driver directly
I'm open to discussions if you consider the current approach is still superior.
Thanks,
Neil
[1] https://lore.kernel.org/r/[email protected]
[2] https://lore.kernel.org/r/[email protected]
Quoted 67 lines
Changes since v9 [10]
- useclk_parent_datainstead ofparent_namesChanges since v8 [9]
- useMESON_SCLK_ONE_BASEDinstead ofCLK_DIVIDER_ONE_BASED
- usestruct_sizeto caculateonecell_data
- addclk-phase-delay.h
- defineCLK_DELAY_STEP_PS_GXandCLK_DELAY_STEP_PS_AXGChanges since v7 [8]
- movemeson_clk_get_phase_delay_data()from header to driver
- CONFIG sclk-div withCOMMON_CLK_AMLOGICinstead ofCOMMON_CLK_AMLOGIC_AUDIO
- remove onecell date and ID for internal MUX clk
- use helper for functions forONE_BASEDin sclk-div
- addONE_BASEDsupport for duty cycleChanges since v6 [7]:
- add one based support for sclk divier
- alloc sclk in probe for multiple instance
- fix coding stylesChanges since v5 [6]:
- remove divider ops with .init and usesclk_divinstead
- dropCLK_DIVIDER_ROUND_CLOSESTin mux and div
- drop the useless type castChanges since v4 [5]:
- use struct parm in phase delay driver
- remove 0 delay releted part in phase delay driver
- don't rebuild the parent name once again
- add divider ops with .initChanges since v3 [4]:
- separate clk-phase-delay driver
- replaceclk_get_rate()withclk_hw_get_rate()
- collect Rob's R-Y
- drop 'meson-' prefix from compatible stringChanges since v2 [3]:
- squash dt-binding clock-id patch
- update license
- fix alignment
- construct a clk registerhelper()functionChanges since v1 [2]:
- implement phase clock
- update compatible name
- adjust file name
- dividerprobe()into small functions, and re-use them[1] https://lkml.kernel.org/r/20180628090034.0637a062@xps13
[2] https://lkml.kernel.org/r/[email protected]
[3] https://lkml.kernel.org/r/[email protected]
[4] https://lkml.kernel.org/r/[email protected]
[5] https://lkml.kernel.org/r/[email protected]
[6] https://lkml.kernel.org/r/[email protected]
[7] https://lkml.kernel.org/r/[email protected]
[8] https://lkml.kernel.org/r/[email protected]
[9] https://lkml.kernel.org/r/[email protected]
[10] https://lore.kernel.org/all/[email protected]/
Liang Yang (4):
clk: meson: add one based divider support for sclk
clk: meson: add emmc sub clock phase delay driver
clk: meson: add DT documentation for emmc clock controller
clk: meson: add sub MMC clock controller driver
Quoted 16 lines
.../bindings/clock/amlogic,mmc-clkc.yaml | 64 ++++ drivers/clk/meson/Kconfig | 18 ++ drivers/clk/meson/Makefile | 2 + drivers/clk/meson/clk-phase-delay.c | 69 ++++ drivers/clk/meson/clk-phase-delay.h | 20 ++ drivers/clk/meson/mmc-clkc.c | 302 ++++++++++++++++++ drivers/clk/meson/sclk-div.c | 59 ++-- drivers/clk/meson/sclk-div.h | 3 + include/dt-bindings/clock/amlogic,mmc-clkc.h | 14 + 9 files changed, 529 insertions(+), 22 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/amlogic,mmc-clkc.yaml create mode 100644 drivers/clk/meson/clk-phase-delay.c create mode 100644 drivers/clk/meson/clk-phase-delay.h create mode 100644 drivers/clk/meson/mmc-clkc.c create mode 100644 include/dt-bindings/clock/amlogic,mmc-clkc.h
_______________________________________________
linux-amlogic mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-amlogic
Hi Neil,
Quoted 19 lines · Neil Armstrong
[ EXTERNAL EMAIL ]
Hi Liang,
Quoted 5 lines · Liang Yang
This driver will add a MMC clock controller driver support. The original idea about adding a clock controller is during the discussion in the NAND driver mainline effort[1].
This driver is tested in the S400 board (AXG platform) with NAND driver.
Thanks a lot for providing a fixed and updated version of this serie.
After some chat with Jerome and Kevin, it seems the way the eMMC clock reuse for NAND was designed nearly 4 years doesn't look accurate anymore.
Having a separate clk driver designed to replace the eMMC node when NAND is used on the board seems over engineered.
Quoted 8 lines
Actually having the clock code you add in this serie _but_ directly in the NAND looks far better, and more coherent since having Linux runtime detection of eMMC vs NAND will never happen and even this serie required some DT modification from the bootloader.
I'll let Jerome or Kevin add more details if they want, but I think you should resurrect the work you pushed in [1] & [2] but:
- passing the eMMC clk registers as a third "reg" cell
Does it just need to define a 'reg' resource in NFC node and not 'syscon' here?
Quoted 4 lines
- passing the same "clocks" phandle as the eMMC node
- adding the eMMC clock code in the NAND driver directlyI'm open to discussions if you consider the current approach is still superior.
I don't have persuasive ideas, but really it shares the common clock implementation for both NFC and EMMC. and we don't need to paste the same code in NFC and EMMC.
Quoted 92 lines
Thanks,
Neil[1] https://lore.kernel.org/r/[email protected]
[2] https://lore.kernel.org/r/[email protected]Quoted 77 lines
Changes since v9 [10]
- useclk_parent_datainstead ofparent_namesChanges since v8 [9]
- useMESON_SCLK_ONE_BASEDinstead ofCLK_DIVIDER_ONE_BASED
- usestruct_sizeto caculateonecell_data
- addclk-phase-delay.h
- defineCLK_DELAY_STEP_PS_GXandCLK_DELAY_STEP_PS_AXGChanges since v7 [8]
- movemeson_clk_get_phase_delay_data()from header to driver
- CONFIG sclk-div withCOMMON_CLK_AMLOGICinstead ofCOMMON_CLK_AMLOGIC_AUDIO
- remove onecell date and ID for internal MUX clk
- use helper for functions forONE_BASEDin sclk-div
- addONE_BASEDsupport for duty cycleChanges since v6 [7]:
- add one based support for sclk divier
- alloc sclk in probe for multiple instance
- fix coding stylesChanges since v5 [6]:
- remove divider ops with .init and usesclk_divinstead
- dropCLK_DIVIDER_ROUND_CLOSESTin mux and div
- drop the useless type castChanges since v4 [5]:
- use struct parm in phase delay driver
- remove 0 delay releted part in phase delay driver
- don't rebuild the parent name once again
- add divider ops with .initChanges since v3 [4]:
- separate clk-phase-delay driver
- replaceclk_get_rate()withclk_hw_get_rate()
- collect Rob's R-Y
- drop 'meson-' prefix from compatible stringChanges since v2 [3]:
- squash dt-binding clock-id patch
- update license
- fix alignment
- construct a clk registerhelper()functionChanges since v1 [2]:
- implement phase clock
- update compatible name
- adjust file name
- dividerprobe()into small functions, and re-use them[1] https://lkml.kernel.org/r/20180628090034.0637a062@xps13
[2] https://lkml.kernel.org/r/[email protected]
[3] https://lkml.kernel.org/r/[email protected]
[4] https://lkml.kernel.org/r/[email protected]
[5] https://lkml.kernel.org/r/[email protected]
[6] https://lkml.kernel.org/r/[email protected]
[7] https://lkml.kernel.org/r/[email protected]
[8] https://lkml.kernel.org/r/[email protected]
[9] https://lkml.kernel.org/r/[email protected]
[10] https://lore.kernel.org/all/[email protected]/
Liang Yang (4):
clk: meson: add one based divider support for sclk
clk: meson: add emmc sub clock phase delay driver
clk: meson: add DT documentation for emmc clock controller
clk: meson: add sub MMC clock controller driver.../bindings/clock/amlogic,mmc-clkc.yaml | 64 ++++ drivers/clk/meson/Kconfig | 18 ++ drivers/clk/meson/Makefile | 2 + drivers/clk/meson/clk-phase-delay.c | 69 ++++ drivers/clk/meson/clk-phase-delay.h | 20 ++ drivers/clk/meson/mmc-clkc.c | 302 ++++++++++++++++++ drivers/clk/meson/sclk-div.c | 59 ++-- drivers/clk/meson/sclk-div.h | 3 + include/dt-bindings/clock/amlogic,mmc-clkc.h | 14 + 9 files changed, 529 insertions(+), 22 deletions(-)Quoted 6 lines
create mode 100644
Documentation/devicetree/bindings/clock/amlogic,mmc-clkc.yamlcreate mode 100644drivers/clk/meson/clk-phase-delay.c
create mode 100644drivers/clk/meson/clk-phase-delay.h
create mode 100644drivers/clk/meson/mmc-clkc.c
create mode 100644include/dt-bindings/clock/amlogic,mmc-clkc.h.
Jerome Brunet
maintainerQuoted 26 lines · Liang Yang
Hi Neil,
Quoted 8 lines · Neil Armstrong
[ EXTERNAL EMAIL ]
Hi Liang,Quoted 5 lines · Liang Yang
This driver will add a MMC clock controller driver support. The original idea about adding a clock controller is during the discussion in the NAND driver mainline effort[1].
This driver is tested in the S400 board (AXG platform) with NAND driver.
Quoted 15 lines
Thanks a lot for providing a fixed and updated version of this serie. After some chat with Jerome and Kevin, it seems the way the eMMC clock reuse
for NAND was designed nearly 4 years doesn't look accurate anymore. Having a separate clk driver designed to replace the eMMC node when NAND is
used on the board seems over engineered.
Actually having the clock code you add in this serie _but_ directly in the NAND looks far better, and more coherent since having Linux runtime detection of eMMC vs NAND will never happen and even this serie required some DT modification from the bootloader.
I'll let Jerome or Kevin add more details if they want, but I think you should resurrect
the work you pushed in [1] & [2] but:
- passing the eMMC clk registers as a third "reg" cell
Quoted 2 lines
Does it just need to define a 'reg' resource in NFC node and not 'syscon' here?
Yes
Quoted 8 lines
Quoted 4 lines
- passing the same "clocks" phandle as the eMMC node
- adding the eMMC clock code in the NAND driver directly I'm open to discussions if you consider the current approach is still superior.I don't have persuasive ideas, but really it shares the common clock implementation for both NFC and EMMC. and we don't need to paste the same code in NFC and EMMC.
You don't need to copy everything. If I understood correctly, all the Rx/Tx should not be needed. Yes, there is some duplication as it stands but it allows to avoid coupling the MMC and NAND driver. We can still think about optimizing things later on. Let's get something simply working first.
Quoted 91 lines
Quoted 91 lines
Thanks,
Neil
[1]
https://lore.kernel.org/r/[email protected]
[2] https://lore.kernel.org/r/[email protected]Quoted 77 lines
Changes since v9 [10]
- useclk_parent_datainstead ofparent_namesChanges since v8 [9]
- useMESON_SCLK_ONE_BASEDinstead ofCLK_DIVIDER_ONE_BASED
- usestruct_sizeto caculateonecell_data
- addclk-phase-delay.h
- defineCLK_DELAY_STEP_PS_GXandCLK_DELAY_STEP_PS_AXGChanges since v7 [8]
- movemeson_clk_get_phase_delay_data()from header to driver
- CONFIG sclk-div withCOMMON_CLK_AMLOGICinstead ofCOMMON_CLK_AMLOGIC_AUDIO
- remove onecell date and ID for internal MUX clk
- use helper for functions forONE_BASEDin sclk-div
- addONE_BASEDsupport for duty cycleChanges since v6 [7]:
- add one based support for sclk divier
- alloc sclk in probe for multiple instance
- fix coding stylesChanges since v5 [6]:
- remove divider ops with .init and usesclk_divinstead
- dropCLK_DIVIDER_ROUND_CLOSESTin mux and div
- drop the useless type castChanges since v4 [5]:
- use struct parm in phase delay driver
- remove 0 delay releted part in phase delay driver
- don't rebuild the parent name once again
- add divider ops with .initChanges since v3 [4]:
- separate clk-phase-delay driver
- replaceclk_get_rate()withclk_hw_get_rate()
- collect Rob's R-Y
- drop 'meson-' prefix from compatible stringChanges since v2 [3]:
- squash dt-binding clock-id patch
- update license
- fix alignment
- construct a clk registerhelper()functionChanges since v1 [2]:
- implement phase clock
- update compatible name
- adjust file name
- dividerprobe()into small functions, and re-use them[1] https://lkml.kernel.org/r/20180628090034.0637a062@xps13
[2] https://lkml.kernel.org/r/[email protected]
[3] https://lkml.kernel.org/r/[email protected]
[4] https://lkml.kernel.org/r/[email protected]
[5] https://lkml.kernel.org/r/[email protected]
[6] https://lkml.kernel.org/r/[email protected]
[7] https://lkml.kernel.org/r/[email protected]
[8] https://lkml.kernel.org/r/[email protected]
[9] https://lkml.kernel.org/r/[email protected]
[10] https://lore.kernel.org/all/[email protected]/
Liang Yang (4):
clk: meson: add one based divider support for sclk
clk: meson: add emmc sub clock phase delay driver
clk: meson: add DT documentation for emmc clock controller
clk: meson: add sub MMC clock controller driver.../bindings/clock/amlogic,mmc-clkc.yaml | 64 ++++ drivers/clk/meson/Kconfig | 18 ++ drivers/clk/meson/Makefile | 2 + drivers/clk/meson/clk-phase-delay.c | 69 ++++ drivers/clk/meson/clk-phase-delay.h | 20 ++ drivers/clk/meson/mmc-clkc.c | 302 ++++++++++++++++++ drivers/clk/meson/sclk-div.c | 59 ++-- drivers/clk/meson/sclk-div.h | 3 + include/dt-bindings/clock/amlogic,mmc-clkc.h | 14 + 9 files changed, 529 insertions(+), 22 deletions(-)Quoted 6 lines
create mode 100644
Documentation/devicetree/bindings/clock/amlogic,mmc-clkc.yamlcreate mode 100644drivers/clk/meson/clk-phase-delay.c
create mode 100644drivers/clk/meson/clk-phase-delay.h
create mode 100644drivers/clk/meson/mmc-clkc.c
create mode 100644include/dt-bindings/clock/amlogic,mmc-clkc.h.
Hi Jerome,
Quoted 45 lines · Jerome Brunet
[ EXTERNAL EMAIL ]
Quoted 26 lines · Liang Yang
Hi Neil,
Quoted 8 lines · Neil Armstrong
[ EXTERNAL EMAIL ]
Hi Liang,Quoted 5 lines · Liang Yang
This driver will add a MMC clock controller driver support. The original idea about adding a clock controller is during the discussion in the NAND driver mainline effort[1].
This driver is tested in the S400 board (AXG platform) with NAND driver.
Quoted 15 lines
Thanks a lot for providing a fixed and updated version of this serie. After some chat with Jerome and Kevin, it seems the way the eMMC clock reuse
for NAND was designed nearly 4 years doesn't look accurate anymore. Having a separate clk driver designed to replace the eMMC node when NAND is
used on the board seems over engineered.
Actually having the clock code you add in this serie _but_ directly in the NAND looks far better, and more coherent since having Linux runtime detection of eMMC vs NAND will never happen and even this serie required some DT modification from the bootloader.
I'll let Jerome or Kevin add more details if they want, but I think you should resurrect
the work you pushed in [1] & [2] but:
- passing the eMMC clk registers as a third "reg" cellQuoted 2 lines
Does it just need to define a 'reg' resource in NFC node and not 'syscon' here?
Yes
Quoted 8 lines
Quoted 4 lines
- passing the same "clocks" phandle as the eMMC node
- adding the eMMC clock code in the NAND driver directly I'm open to discussions if you consider the current approach is still superior.I don't have persuasive ideas, but really it shares the common clock implementation for both NFC and EMMC. and we don't need to paste the same code in NFC and EMMC.
Quoted 5 lines
You don't need to copy everything. If I understood correctly, all the Rx/Tx should not be needed. Yes, there is some duplication as it stands but it allows to avoid coupling the MMC and NAND driver. We can still think about optimizing things later on. Let's get something simply working first.
ok. i will do it. thank you.
Quoted 94 lines
Quoted 91 lines
Quoted 91 lines
Thanks,
Neil
[1]
https://lore.kernel.org/r/[email protected]
[2] https://lore.kernel.org/r/[email protected]Quoted 83 lines
Changes since v9 [10]
- useclk_parent_datainstead ofparent_namesChanges since v8 [9]
- useMESON_SCLK_ONE_BASEDinstead ofCLK_DIVIDER_ONE_BASED
- usestruct_sizeto caculateonecell_data
- addclk-phase-delay.h
- defineCLK_DELAY_STEP_PS_GXandCLK_DELAY_STEP_PS_AXGChanges since v7 [8]
- movemeson_clk_get_phase_delay_data()from header to driver
- CONFIG sclk-div withCOMMON_CLK_AMLOGICinstead ofCOMMON_CLK_AMLOGIC_AUDIO
- remove onecell date and ID for internal MUX clk
- use helper for functions forONE_BASEDin sclk-div
- addONE_BASEDsupport for duty cycleChanges since v6 [7]:
- add one based support for sclk divier
- alloc sclk in probe for multiple instance
- fix coding stylesChanges since v5 [6]:
- remove divider ops with .init and usesclk_divinstead
- dropCLK_DIVIDER_ROUND_CLOSESTin mux and div
- drop the useless type castChanges since v4 [5]:
- use struct parm in phase delay driver
- remove 0 delay releted part in phase delay driver
- don't rebuild the parent name once again
- add divider ops with .initChanges since v3 [4]:
- separate clk-phase-delay driver
- replaceclk_get_rate()withclk_hw_get_rate()
- collect Rob's R-Y
- drop 'meson-' prefix from compatible stringChanges since v2 [3]:
- squash dt-binding clock-id patch
- update license
- fix alignment
- construct a clk registerhelper()functionChanges since v1 [2]:
- implement phase clock
- update compatible name
- adjust file name
- dividerprobe()into small functions, and re-use them[1] https://lkml.kernel.org/r/20180628090034.0637a062@xps13
[2] https://lkml.kernel.org/r/[email protected]
[3] https://lkml.kernel.org/r/[email protected]
[4] https://lkml.kernel.org/r/[email protected]
[5] https://lkml.kernel.org/r/[email protected]
[6] https://lkml.kernel.org/r/[email protected]
[7] https://lkml.kernel.org/r/[email protected]
[8] https://lkml.kernel.org/r/[email protected]
[9] https://lkml.kernel.org/r/[email protected]
[10] https://lore.kernel.org/all/[email protected]/
Liang Yang (4):
clk: meson: add one based divider support for sclk
clk: meson: add emmc sub clock phase delay driver
clk: meson: add DT documentation for emmc clock controller
clk: meson: add sub MMC clock controller driver.../bindings/clock/amlogic,mmc-clkc.yaml | 64 ++++ drivers/clk/meson/Kconfig | 18 ++ drivers/clk/meson/Makefile | 2 + drivers/clk/meson/clk-phase-delay.c | 69 ++++ drivers/clk/meson/clk-phase-delay.h | 20 ++ drivers/clk/meson/mmc-clkc.c | 302 ++++++++++++++++++ drivers/clk/meson/sclk-div.c | 59 ++-- drivers/clk/meson/sclk-div.h | 3 + include/dt-bindings/clock/amlogic,mmc-clkc.h | 14 + 9 files changed, 529 insertions(+), 22 deletions(-)create mode 100644
Documentation/devicetree/bindings/clock/amlogic,mmc-clkc.yamlcreate mode 100644drivers/clk/meson/clk-phase-delay.c
create mode 100644drivers/clk/meson/clk-phase-delay.h
create mode 100644drivers/clk/meson/mmc-clkc.c
create mode 100644include/dt-bindings/clock/amlogic,mmc-clkc.hQuoted 1 line
Quoted 1 line
.
.