Skip to contentSkip to conversation

mt76: Ensure sale skb status list is processed.

PATCH In review [email protected] 2 participants 3 messages Jan 21, 2022 – Jan 22, 2022

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 mt76: Ensure sale skb status list is processed.

From: Ben Greear <[email protected]>

The old code might not ever run the stale skb status processing list, so change it to ensure the stale entries are cleaned up regularly.

---
 drivers/net/wireless/mediatek/mt76/mt76.h |  1 +
 drivers/net/wireless/mediatek/mt76/tx.c   | 24 +++++++++++++++++------
 2 files changed, 19 insertions(+), 6 deletions(-)
drivers/net/wireless/mediatek/mt76/mt76.h +1 -0
index 37d82d806c09..bfb68788251f 100644
@@ -271,6 +271,7 @@ struct mt76_wcid {
 
 	struct list_head list;
 	struct idr pktid;
+	unsigned long last_idr_check_at; /* in jiffies */
 };
 
 struct mt76_txq {
drivers/net/wireless/mediatek/mt76/tx.c +18 -6
index 938353ac272f..b6f0d74fd563 100644
@@ -157,24 +157,35 @@ mt76_tx_status_skb_get(struct mt76_dev *dev, struct mt76_wcid *wcid, int pktid,
 		       struct sk_buff_head *list)
 {
 	struct sk_buff *skb;
+	struct sk_buff *skb2;
 	int id;
+	/* Check twice as often as the timeout value so that we mitigate
+	 * worse-case timeout detection (where we do the check right before
+	 * the per skb timer would have expired and so have to wait another interval
+	 * to detect the skb status timeout.)
+	 */
+	static const int check_interval = MT_TX_STATUS_SKB_TIMEOUT / 2;
 
 	lockdep_assert_held(&dev->status_lock);
 
 	skb = idr_remove(&wcid->pktid, pktid);
-	if (skb)
+
+	/* If we have not checked for stale entries recently,
+	 * then do that check now.
+	 */
+	if (time_is_after_jiffies(wcid->last_idr_check_at + check_interval))
 		goto out;
 
 	/* look for stale entries in the wcid idr queue */
-	idr_for_each_entry(&wcid->pktid, skb, id) {
-		struct mt76_tx_cb *cb = mt76_tx_skb_cb(skb);
+	idr_for_each_entry(&wcid->pktid, skb2, id) {
+		struct mt76_tx_cb *cb = mt76_tx_skb_cb(skb2);
 
 		if (pktid >= 0) {
 			if (!(cb->flags & MT_TX_CB_DMA_DONE))
 				continue;
 
 			if (time_is_after_jiffies(cb->jiffies +
-						   MT_TX_STATUS_SKB_TIMEOUT))
+						  MT_TX_STATUS_SKB_TIMEOUT))
 				continue;
 		}
 
@@ -182,9 +193,10 @@ mt76_tx_status_skb_get(struct mt76_dev *dev, struct mt76_wcid *wcid, int pktid,
 		 * and stop waiting for TXS callback.
 		 */
 		idr_remove(&wcid->pktid, cb->pktid);
-		__mt76_tx_status_skb_done(dev, skb, MT_TX_CB_TXS_FAILED |
-						    MT_TX_CB_TXS_DONE, list);
+		__mt76_tx_status_skb_done(dev, skb2, MT_TX_CB_TXS_FAILED |
+					  MT_TX_CB_TXS_DONE, list);
 	}
+	wcid->last_idr_check_at = jiffies;
 
 out:
 	if (idr_is_empty(&wcid->pktid))
Signature · 1 line
2.20.1
author
#1 lore raw
Quoted 5 lines · On 1/21/22 11:55 AM, [email protected] wrote:

From: Ben Greear <[email protected]>

The old code might not ever run the stale skb status processing list, so change it to ensure the stale entries are cleaned up regularly.

Please ignore this, I did not understand how the mac_work logic could call the tx_status_skb_get such that pktid was purposefully invalid and thus cause the cleanup logic to happen.

Perhaps my original issue this attempted to fix was related to some other problem.

Thanks,
Bne

Quoted 77 lines
---
  drivers/net/wireless/mediatek/mt76/mt76.h |  1 +
  drivers/net/wireless/mediatek/mt76/tx.c   | 24 +++++++++++++++++------
  2 files changed, 19 insertions(+), 6 deletions(-)
drivers/net/wireless/mediatek/mt76/mt76.h +1 -0
index 37d82d806c09..bfb68788251f 100644
@@ -271,6 +271,7 @@ struct mt76_wcid {
 
  	struct list_head list;
  	struct idr pktid;
+	unsigned long last_idr_check_at; /* in jiffies */
  };
 
  struct mt76_txq {
drivers/net/wireless/mediatek/mt76/tx.c +18 -6
index 938353ac272f..b6f0d74fd563 100644
@@ -157,24 +157,35 @@ mt76_tx_status_skb_get(struct mt76_dev *dev, struct mt76_wcid *wcid, int pktid,
  		       struct sk_buff_head *list)
  {
  	struct sk_buff *skb;
+	struct sk_buff *skb2;
  	int id;
+	/* Check twice as often as the timeout value so that we mitigate
+	 * worse-case timeout detection (where we do the check right before
+	 * the per skb timer would have expired and so have to wait another interval
+	 * to detect the skb status timeout.)
+	 */
+	static const int check_interval = MT_TX_STATUS_SKB_TIMEOUT / 2;
 
  	lockdep_assert_held(&dev->status_lock);
 
  	skb = idr_remove(&wcid->pktid, pktid);
-	if (skb)
+
+	/* If we have not checked for stale entries recently,
+	 * then do that check now.
+	 */
+	if (time_is_after_jiffies(wcid->last_idr_check_at + check_interval))
  		goto out;
 
  	/* look for stale entries in the wcid idr queue */
-	idr_for_each_entry(&wcid->pktid, skb, id) {
-		struct mt76_tx_cb *cb = mt76_tx_skb_cb(skb);
+	idr_for_each_entry(&wcid->pktid, skb2, id) {
+		struct mt76_tx_cb *cb = mt76_tx_skb_cb(skb2);
 
  		if (pktid >= 0) {
  			if (!(cb->flags & MT_TX_CB_DMA_DONE))
  				continue;
 
  			if (time_is_after_jiffies(cb->jiffies +
-						   MT_TX_STATUS_SKB_TIMEOUT))
+						  MT_TX_STATUS_SKB_TIMEOUT))
  				continue;
  		}
 
@@ -182,9 +193,10 @@ mt76_tx_status_skb_get(struct mt76_dev *dev, struct mt76_wcid *wcid, int pktid,
  		 * and stop waiting for TXS callback.
  		 */
  		idr_remove(&wcid->pktid, cb->pktid);
-		__mt76_tx_status_skb_done(dev, skb, MT_TX_CB_TXS_FAILED |
-						    MT_TX_CB_TXS_DONE, list);
+		__mt76_tx_status_skb_done(dev, skb2, MT_TX_CB_TXS_FAILED |
+					  MT_TX_CB_TXS_DONE, list);
  	}
+	wcid->last_idr_check_at = jiffies;
 
  out:
  	if (idr_is_empty(&wcid->pktid))
Signature · 2 lines
Ben Greear <[email protected]>
Candela Technologies Inc  http://www.candelatech.com
maintainer
#2 lore raw
In reply to [email protected]
Quoted 5 lines

From: Ben Greear <[email protected]>

The old code might not ever run the stale skb status processing list, so change it to ensure the stale entries are cleaned up regularly.

I guess this work is already performed in mt76_tx_status_check() executed by mac work (e.g. mt7921_mac_work()) where pid is set to 0 and the first lookup will always fail. Have you identified an issue in the current codebase?

Quoted 64 lines
---
 drivers/net/wireless/mediatek/mt76/mt76.h |  1 +
 drivers/net/wireless/mediatek/mt76/tx.c   | 24 +++++++++++++++++------
 2 files changed, 19 insertions(+), 6 deletions(-)
drivers/net/wireless/mediatek/mt76/mt76.h +1 -0
index 37d82d806c09..bfb68788251f 100644
@@ -271,6 +271,7 @@ struct mt76_wcid {
 
 	struct list_head list;
 	struct idr pktid;
+	unsigned long last_idr_check_at; /* in jiffies */
 };
 
 struct mt76_txq {
drivers/net/wireless/mediatek/mt76/tx.c +15 -4
index 938353ac272f..b6f0d74fd563 100644
@@ -157,24 +157,35 @@ mt76_tx_status_skb_get(struct mt76_dev *dev, struct mt76_wcid *wcid, int pktid,
 		       struct sk_buff_head *list)
 {
 	struct sk_buff *skb;
+	struct sk_buff *skb2;
 	int id;
+	/* Check twice as often as the timeout value so that we mitigate
+	 * worse-case timeout detection (where we do the check right before
+	 * the per skb timer would have expired and so have to wait another interval
+	 * to detect the skb status timeout.)
+	 */
+	static const int check_interval = MT_TX_STATUS_SKB_TIMEOUT / 2;
 
 	lockdep_assert_held(&dev->status_lock);
 
 	skb = idr_remove(&wcid->pktid, pktid);
-	if (skb)
+
+	/* If we have not checked for stale entries recently,
+	 * then do that check now.
+	 */
+	if (time_is_after_jiffies(wcid->last_idr_check_at + check_interval))
 		goto out;
 
 	/* look for stale entries in the wcid idr queue */
-	idr_for_each_entry(&wcid->pktid, skb, id) {
-		struct mt76_tx_cb *cb = mt76_tx_skb_cb(skb);
+	idr_for_each_entry(&wcid->pktid, skb2, id) {
+		struct mt76_tx_cb *cb = mt76_tx_skb_cb(skb2);
 
 		if (pktid >= 0) {
 			if (!(cb->flags & MT_TX_CB_DMA_DONE))
 				continue;
 
 			if (time_is_after_jiffies(cb->jiffies +
-						   MT_TX_STATUS_SKB_TIMEOUT))
+						  MT_TX_STATUS_SKB_TIMEOUT))
 				continue;
 		}
 

drivers/net/wireless/mediatek/mt76/tx.c mt76_tx_status_skb_get(struct mt76_dev *dev, struct mt76_wcid *wcid, int pktid, · line 186

Quoted 5 lines
drivers/net/wireless/mediatek/mt76/tx.c +0 -2
@@ -182,9 +193,10 @@ mt76_tx_status_skb_get(struct mt76_dev *dev, struct mt76_wcid *wcid, int pktid,
 		 * and stop waiting for TXS callback.
 		 */
 		idr_remove(&wcid->pktid, cb->pktid);
-		__mt76_tx_status_skb_done(dev, skb, MT_TX_CB_TXS_FAILED |
-						    MT_TX_CB_TXS_DONE, list);

I guess it is more readable as it was before.

Regards,
Lorenzo

Quoted 10 lines
drivers/net/wireless/mediatek/mt76/tx.c +3 -0
+		__mt76_tx_status_skb_done(dev, skb2, MT_TX_CB_TXS_FAILED |
+					  MT_TX_CB_TXS_DONE, list);
 	}
+	wcid->last_idr_check_at = jiffies;
 
 out:
 	if (idr_is_empty(&wcid->pktid))
Signature · 1 line
2.20.1