Multiple addition and improvement to ipq8064 gcc
Subsystems (5)
v3 cover Multiple addition and improvement to ipq8064 gcc
This is an attempt in making the ipq8064 SoC actually usable. Currently many feature are missing for this SoC and devs user off-the-tree patches to make it work (example patch for missing clock, patch for cpufreq driver, patch to add missing node in the dts)
I notice there was some work in modernizing the gcc driver for other qcom target but this wasn't done for ipq806x. This does exactly this, we drop any parent_names stuff and we switch to the parent_data way. We also drop the pxo and cxo source clk from gcc driver and we refer to the dts for it.
This also add all the missing feature for the nss cores and the cryptoengine in them. It does also introduce the required flags to make the RPM actually work and NOT reject any command. There was an attempt in declaring these clock as core clock in the dts but this ends up in no serial as the kernel makes these clock not accessible. We just want to make the kernel NOT disable them if unused nothing more.
At the end we update the ipq8064 dtsi to add the pxo and cxo tag and declare them in gcc and also fix a problem with tsens probe.
v3:
- Rework Documentation with Rob suggestions
v2:
- Fix error from Rob bot.
- Add additional commits to make qcom,gcc.yaml a template
- Squash parent_hws patch with the modernize patch
- Create gcc_pxo instead of using long define.
Ansuel Smith (15):
dt-bindings: clock: split qcom,gcc.yaml to common and specific schema
dt-bindings: clock: simplify qcom,gcc-apq8064 Documentation
dt-bindings: clock: Document qcom,gcc-ipq8064 binding
drivers: clk: qcom: gcc-ipq806x: fix wrong naming for
gcc_pxo_pll8_pll0
drivers: clk: qcom: gcc-ipq806x: convert parent_names to parent_data
drivers: clk: qcom: gcc-ipq806x: use ARRAY_SIZE for num_parents
drivers: clk: qcom: gcc-ipq806x: drop hardcoded pxo and cxo source clk
drivers: clk: qcom: gcc-ipq806x: add additional freq nss cores
drivers: clk: qcom: gcc-ipq806x: add unusued flag for critical clock
drivers: clk: qcom: gcc-ipq806x: add additional freq for sdc table
dt-bindings: clock: add ipq8064 ce5 clk define
drivers: clk: qcom: gcc-ipq806x: add CryptoEngine clocks
dt-bindings: reset: add ipq8064 ce5 resets
drivers: clk: qcom: gcc-ipq806x: add CryptoEngine resets
ARM: dts: qcom: Add syscon and cxo/pxo clock to gcc node for ipq8064
.../bindings/clock/qcom,gcc-apq8064.yaml | 29 +- .../bindings/clock/qcom,gcc-common.yaml | 42 ++ .../bindings/clock/qcom,gcc-ipq8064.yaml | 76 +++ .../devicetree/bindings/clock/qcom,gcc.yaml | 31 +- arch/arm/boot/dts/qcom-ipq8064.dtsi | 8 +- drivers/clk/qcom/gcc-ipq806x.c | 638 +++++++++++++----- include/dt-bindings/clock/qcom,gcc-ipq806x.h | 5 +- include/dt-bindings/reset/qcom,gcc-ipq806x.h | 5 + 8 files changed, 615 insertions(+), 219 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/qcom,gcc-common.yaml create mode 100644 Documentation/devicetree/bindings/clock/qcom,gcc-ipq8064.yaml
Signature · 1 line
2.33.1
PATCH v3 1/15 dt-bindings: clock: split qcom,gcc.yaml to common and specific schema
Split qcom,gcc.yaml to common and specific schema to use it as a template for schema that needs to use the gcc bindings and require to add additional bindings.
--- .../bindings/clock/qcom,gcc-common.yaml | 42 +++++++++++++++++++ .../devicetree/bindings/clock/qcom,gcc.yaml | 25 ++--------- 2 files changed, 46 insertions(+), 21 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/qcom,gcc-common.yaml
Documentation/devicetree/bindings/clock/qcom,gcc-common.yaml new file +42 -0
@@ -0,0 +1,42 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,gcc-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller Binding Common Bindings + +maintainers: + - Stephen Boyd <[email protected]> + - Taniya Das <[email protected]> + +description: | + Common bindings for Qualcomm global clock control module which supports + the clocks, resets and power domains. + +properties: + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + reg: + maxItems: 1 + + protected-clocks: + description: + Protected clock specifier list as per common clock binding. + +required: + - reg + - '#clock-cells' + - '#reset-cells' + - '#power-domain-cells' + +additionalProperties: true + +...
Documentation/devicetree/bindings/clock/qcom,gcc.yaml +4 -21
@@ -34,6 +34,9 @@ description: | - dt-bindings/reset/qcom,gcc-mdm9615.h - dt-bindings/clock/qcom,gcc-sdm660.h (qcom,gcc-sdm630 and qcom,gcc-sdm660) +allOf: + - $ref: "qcom,gcc-common.yaml#" + properties: compatible: enum:
@@ -55,30 +58,10 @@ properties: - qcom,gcc-sdm630 - qcom,gcc-sdm660 - '#clock-cells': - const: 1 - - '#reset-cells': - const: 1 - - '#power-domain-cells': - const: 1 - - reg: - maxItems: 1 - - protected-clocks: - description: - Protected clock specifier list as per common clock binding. - required: - compatible - - reg - - '#clock-cells' - - '#reset-cells' - - '#power-domain-cells' -additionalProperties: false +unevaluatedProperties: false examples: # Example for GCC for MSM8960:
Signature · 1 line
2.33.1
Re: [PATCH v3 01/15] dt-bindings: clock: split qcom,gcc.yaml to common and specific schema
Quoted 4 lines · Ansuel Smith
Split qcom,gcc.yaml to common and specific schema to use it as a template for schema that needs to use the gcc bindings and require to add additional bindings.
Nice!
Documentation/devicetree/bindings/clock/qcom,gcc-common.yaml
Quoted 12 lines
Signed-off-by Ansuel Smith <[email protected]>--- .../bindings/clock/qcom,gcc-common.yaml | 42 +++++++++++++++++++ .../devicetree/bindings/clock/qcom,gcc.yaml | 25 ++--------- 2 files changed, 46 insertions(+), 21 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/qcom,gcc-common.yamlDocumentation/devicetree/bindings/clock/qcom,gcc-common.yaml new file +0
-0
It seems reasonable to expect that qcom,gcc.yaml should be split out in a number of trivial qcom,gcc-platform.yaml files to define input clock etc. So how about using qcom,gcc.yaml for the common properties and for now rename the existing file to something like qcom,gcc-others.yaml ?
Quoted 4 lines
Documentation/devicetree/bindings/clock/qcom,gcc-common.yaml new file +3
-0@@ -0,0 +1,42 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +---
Documentation/devicetree/bindings/clock/qcom,gcc-common.yaml line 13
Quoted 10 lines
Documentation/devicetree/bindings/clock/qcom,gcc-common.yaml new file +10
-0+$id: http://devicetree.org/schemas/clock/qcom,gcc-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller Binding Common Bindings + +maintainers: + - Stephen Boyd <[email protected]> + - Taniya Das <[email protected]> + +description: |
No need to preserve the formatting here, so the pipe can go.
Regards,
Bjorn
Quoted 78 lines
Documentation/devicetree/bindings/clock/qcom,gcc-common.yaml new file +29
-0+ Common bindings for Qualcomm global clock control module which supports + the clocks, resets and power domains. + +properties: + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + reg: + maxItems: 1 + + protected-clocks: + description: + Protected clock specifier list as per common clock binding. + +required: + - reg + - '#clock-cells' + - '#reset-cells' + - '#power-domain-cells' + +additionalProperties: true + +...Documentation/devicetree/bindings/clock/qcom,gcc.yaml +4
-21@@ -34,6 +34,9 @@ description: | - dt-bindings/reset/qcom,gcc-mdm9615.h - dt-bindings/clock/qcom,gcc-sdm660.h (qcom,gcc-sdm630 and qcom,gcc-sdm660) +allOf: + - $ref: "qcom,gcc-common.yaml#" + properties: compatible: enum:@@ -55,30 +58,10 @@ properties: - qcom,gcc-sdm630 - qcom,gcc-sdm660 - '#clock-cells': - const: 1 - - '#reset-cells': - const: 1 - - '#power-domain-cells': - const: 1 - - reg: - maxItems: 1 - - protected-clocks: - description: - Protected clock specifier list as per common clock binding. - required: - compatible - - reg - - '#clock-cells' - - '#reset-cells' - - '#power-domain-cells' -additionalProperties: false +unevaluatedProperties: false examples: # Example for GCC for MSM8960:Signature · 1 line
2.33.1
Re: [PATCH v3 01/15] dt-bindings: clock: split qcom,gcc.yaml to common and specific schema
Quoted 16 lines · Bjorn Andersson
Quoted 4 lines · Ansuel Smith
Split qcom,gcc.yaml to common and specific schema to use it as a template for schema that needs to use the gcc bindings and require to add additional bindings.
Nice!
Quoted 7 lines
Signed-off-by Ansuel Smith <[email protected]>--- .../bindings/clock/qcom,gcc-common.yaml | 42 +++++++++++++++++++ .../devicetree/bindings/clock/qcom,gcc.yaml | 25 ++--------- 2 files changed, 46 insertions(+), 21 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/qcom,gcc-common.yaml
Quoted 12 lines
Documentation/devicetree/bindings/clock/qcom,gcc-common.yaml
Quoted 5 lines
Documentation/devicetree/bindings/clock/qcom,gcc-common.yaml new file +0
-0It seems reasonable to expect that qcom,gcc.yaml should be split out in a number of trivial qcom,gcc-platform.yaml files to define input clock etc. So how about using qcom,gcc.yaml for the common properties and for now rename the existing file to something like qcom,gcc-others.yaml ?
Ok, just to make sure.gcc-common.yaml -> gcc.yaml (the template) gcc.yaml -> gcc-others.yaml (the generic gcc schema)
Correct?
Quoted 98 lines
Quoted 4 lines
Documentation/devicetree/bindings/clock/qcom,gcc-common.yaml new file +3
-0@@ -0,0 +1,42 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +---Documentation/devicetree/bindings/clock/qcom,gcc-common.yaml line 13
Quoted 10 lines
Documentation/devicetree/bindings/clock/qcom,gcc-common.yaml new file +10
-0+$id: http://devicetree.org/schemas/clock/qcom,gcc-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller Binding Common Bindings + +maintainers: + - Stephen Boyd <[email protected]> + - Taniya Das <[email protected]> + +description: |No need to preserve the formatting here, so the pipe can go.
Regards,
BjornQuoted 78 lines
Documentation/devicetree/bindings/clock/qcom,gcc-common.yaml new file +29
-0+ Common bindings for Qualcomm global clock control module which supports + the clocks, resets and power domains. + +properties: + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + reg: + maxItems: 1 + + protected-clocks: + description: + Protected clock specifier list as per common clock binding. + +required: + - reg + - '#clock-cells' + - '#reset-cells' + - '#power-domain-cells' + +additionalProperties: true + +...Documentation/devicetree/bindings/clock/qcom,gcc.yaml +4
-21@@ -34,6 +34,9 @@ description: | - dt-bindings/reset/qcom,gcc-mdm9615.h - dt-bindings/clock/qcom,gcc-sdm660.h (qcom,gcc-sdm630 and qcom,gcc-sdm660) +allOf: + - $ref: "qcom,gcc-common.yaml#" + properties: compatible: enum:@@ -55,30 +58,10 @@ properties: - qcom,gcc-sdm630 - qcom,gcc-sdm660 - '#clock-cells': - const: 1 - - '#reset-cells': - const: 1 - - '#power-domain-cells': - const: 1 - - reg: - maxItems: 1 - - protected-clocks: - description: - Protected clock specifier list as per common clock binding. - required: - compatible - - reg - - '#clock-cells' - - '#reset-cells' - - '#power-domain-cells' -additionalProperties: false +unevaluatedProperties: false examples: # Example for GCC for MSM8960:Signature · 1 line
2.33.1
Signature · 1 line
Ansuel
PATCH v3 2/15 dt-bindings: clock: simplify qcom,gcc-apq8064 Documentation
In reply to Ansuel SmithSimplify qcon,gcc-apq8064 Documentation by using qcom,gcc-common.yaml as a template and remove the compatible from qcom,gcc.yaml
--- .../bindings/clock/qcom,gcc-apq8064.yaml | 29 +++++-------------- .../devicetree/bindings/clock/qcom,gcc.yaml | 3 -- 2 files changed, 7 insertions(+), 25 deletions(-)
Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml +7 -22
@@ -6,6 +6,9 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Global Clock & Reset Controller Binding for APQ8064 +allOf: + - $ref: qcom,gcc-common.yaml# + maintainers: - Stephen Boyd <[email protected]> - Taniya Das <[email protected]>
@@ -17,22 +20,12 @@ description: | See also: - dt-bindings/clock/qcom,gcc-msm8960.h - dt-bindings/reset/qcom,gcc-msm8960.h + - dt-bindings/clock/qcom,gcc-apq8084.h + - dt-bindings/reset/qcom,gcc-apq8084.h properties: compatible: - const: qcom,gcc-apq8064 - - '#clock-cells': - const: 1 - - '#reset-cells': - const: 1 - - '#power-domain-cells': - const: 1 - - reg: - maxItems: 1 + const: qcom,gcc-apq8084 nvmem-cells: minItems: 1
@@ -53,21 +46,13 @@ properties: '#thermal-sensor-cells': const: 1 - protected-clocks: - description: - Protected clock specifier list as per common clock binding. - required: - compatible - - reg - - '#clock-cells' - - '#reset-cells' - - '#power-domain-cells' - nvmem-cells - nvmem-cell-names - '#thermal-sensor-cells' -additionalProperties: false +unevaluatedProperties: false examples: - |
Documentation/devicetree/bindings/clock/qcom,gcc.yaml +0 -3
@@ -15,8 +15,6 @@ description: | power domains. See also: - - dt-bindings/clock/qcom,gcc-apq8084.h - - dt-bindings/reset/qcom,gcc-apq8084.h - dt-bindings/clock/qcom,gcc-ipq4019.h - dt-bindings/clock/qcom,gcc-ipq6018.h - dt-bindings/reset/qcom,gcc-ipq6018.h
@@ -40,7 +38,6 @@ allOf: properties: compatible: enum: - - qcom,gcc-apq8084 - qcom,gcc-ipq4019 - qcom,gcc-ipq6018 - qcom,gcc-ipq8064
Signature · 1 line
2.33.1
PATCH v3 3/15 dt-bindings: clock: Document qcom,gcc-ipq8064 binding
In reply to Ansuel SmithDocument qcom,gcc-ipq8064 binding needed to declare pxo and cxo source clocks. The gcc node is also used by the tsens driver, already documented, to get the calib nvmem cells and the base reg from gcc. Use qcom,gcc-common.yaml as a template and remove the compatible from generic qcom,gcc.yaml
--- .../bindings/clock/qcom,gcc-ipq8064.yaml | 76 +++++++++++++++++++ .../devicetree/bindings/clock/qcom,gcc.yaml | 3 - 2 files changed, 76 insertions(+), 3 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/qcom,gcc-ipq8064.yaml
Documentation/devicetree/bindings/clock/qcom,gcc-ipq8064.yaml new file +76 -0
@@ -0,0 +1,76 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,gcc-ipq8064.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller Binding for IPQ8064 + +allOf: + - $ref: qcom,gcc-common.yaml# + +maintainers: + - Ansuel Smith <[email protected]> + +description: | + Qualcomm global clock control module which supports the clocks, resets and + power domains on IPQ8064. + + See also: + - dt-bindings/clock/qcom,gcc-ipq806x.h (qcom,gcc-ipq8064) + - dt-bindings/reset/qcom,gcc-ipq806x.h (qcom,gcc-ipq8064) + +properties: + compatible: + items: + - const: qcom,gcc-ipq8064 + - const: syscon + + clocks: + items: + - description: PXO source + - description: CXO source + + clock-names: + items: + - const: pxo + - const: cxo + + thermal-sensor: + type: object + + allOf: + - $ref: /schemas/thermal/qcom-tsens.yaml# + +required: + - compatible + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + gcc: clock-controller@900000 { + compatible = "qcom,gcc-ipq8064", "syscon"; + reg = <0x00900000 0x4000>; + clocks = <&pxo_board>, <&cxo_board>; + clock-names = "pxo", "cxo"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + + tsens: thermal-sensor { + compatible = "qcom,ipq8064-tsens"; + + nvmem-cells = <&tsens_calib>, <&tsens_calib_backup>; + nvmem-cell-names = "calib", "calib_backup"; + interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow"; + + #qcom,sensors = <11>; + #thermal-sensor-cells = <1>; + }; + };
Documentation/devicetree/bindings/clock/qcom,gcc.yaml +0 -3
@@ -18,8 +18,6 @@ description: | - dt-bindings/clock/qcom,gcc-ipq4019.h - dt-bindings/clock/qcom,gcc-ipq6018.h - dt-bindings/reset/qcom,gcc-ipq6018.h - - dt-bindings/clock/qcom,gcc-ipq806x.h (qcom,gcc-ipq8064) - - dt-bindings/reset/qcom,gcc-ipq806x.h (qcom,gcc-ipq8064) - dt-bindings/clock/qcom,gcc-msm8939.h - dt-bindings/clock/qcom,gcc-msm8953.h - dt-bindings/reset/qcom,gcc-msm8939.h
@@ -40,7 +38,6 @@ properties: enum: - qcom,gcc-ipq4019 - qcom,gcc-ipq6018 - - qcom,gcc-ipq8064 - qcom,gcc-mdm9607 - qcom,gcc-msm8226 - qcom,gcc-msm8660
Signature · 1 line
2.33.1
PATCH v3 4/15 drivers: clk: qcom: gcc-ipq806x: fix wrong naming for gcc_pxo_pll8_pll0
In reply to Ansuel SmithParent gcc_pxo_pll8_pll0 had the parent definition and parent map swapped. Fix this naming error.
--- drivers/clk/qcom/gcc-ipq806x.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-)
drivers/clk/qcom/gcc-ipq806x.c +10 -10
@@ -291,13 +291,13 @@ static const char * const gcc_pxo_pll3[] = { "pll3", }; -static const struct parent_map gcc_pxo_pll8_pll0[] = { +static const struct parent_map gcc_pxo_pll8_pll0_map[] = { {P_PXO ,0 }, {P_PLL8 ,3 }, {P_PLL0 ,2 } }; -static const char *const gcc_pxo_pll8_pll0_map[] = { +static const char *const gcc_pxo_pll8_pll0[] = {"pxo" ,"pll8_vote" ,"pll0_vote" ,
@@ -1993,7 +1993,7 @@ static struct clk_rcg usb30_master_clk_src = { }, .s = { .src_sel_shift = 0, - .parent_map = gcc_pxo_pll8_pll0, + .parent_map = gcc_pxo_pll8_pll0_map, }, .freq_tbl = clk_tbl_usb30_master, .clkr = {
@@ -2001,7 +2001,7 @@ static struct clk_rcg usb30_master_clk_src = { .enable_mask = BIT(11), .hw.init = &(struct clk_init_data ){ .name ="usb30_master_ref_src" , - .parent_names = gcc_pxo_pll8_pll0_map, + .parent_names = gcc_pxo_pll8_pll0, .num_parents =3 , .ops = &clk_rcg_ops, .flags =CLK_SET_RATE_GATE ,
@@ -2063,7 +2063,7 @@ static struct clk_rcg usb30_utmi_clk = { }, .s = { .src_sel_shift = 0, - .parent_map = gcc_pxo_pll8_pll0, + .parent_map = gcc_pxo_pll8_pll0_map, }, .freq_tbl = clk_tbl_usb30_utmi, .clkr = {
@@ -2071,7 +2071,7 @@ static struct clk_rcg usb30_utmi_clk = { .enable_mask = BIT(11), .hw.init = &(struct clk_init_data ){ .name ="usb30_utmi_clk" , - .parent_names = gcc_pxo_pll8_pll0_map, + .parent_names = gcc_pxo_pll8_pll0, .num_parents =3 , .ops = &clk_rcg_ops, .flags =CLK_SET_RATE_GATE ,
@@ -2133,7 +2133,7 @@ static struct clk_rcg usb_hs1_xcvr_clk_src = { }, .s = { .src_sel_shift = 0, - .parent_map = gcc_pxo_pll8_pll0, + .parent_map = gcc_pxo_pll8_pll0_map, }, .freq_tbl = clk_tbl_usb, .clkr = {
@@ -2141,7 +2141,7 @@ static struct clk_rcg usb_hs1_xcvr_clk_src = { .enable_mask = BIT(11), .hw.init = &(struct clk_init_data ){ .name ="usb_hs1_xcvr_src" , - .parent_names = gcc_pxo_pll8_pll0_map, + .parent_names = gcc_pxo_pll8_pll0, .num_parents =3 , .ops = &clk_rcg_ops, .flags =CLK_SET_RATE_GATE ,
@@ -2197,7 +2197,7 @@ static struct clk_rcg usb_fs1_xcvr_clk_src = { }, .s = { .src_sel_shift = 0, - .parent_map = gcc_pxo_pll8_pll0, + .parent_map = gcc_pxo_pll8_pll0_map, }, .freq_tbl = clk_tbl_usb, .clkr = {
@@ -2205,7 +2205,7 @@ static struct clk_rcg usb_fs1_xcvr_clk_src = { .enable_mask = BIT(11), .hw.init = &(struct clk_init_data ){ .name ="usb_fs1_xcvr_src" , - .parent_names = gcc_pxo_pll8_pll0_map, + .parent_names = gcc_pxo_pll8_pll0, .num_parents =3 , .ops = &clk_rcg_ops, .flags =CLK_SET_RATE_GATE ,
Signature · 1 line
2.33.1
Re: [PATCH v3 04/15] drivers: clk: qcom: gcc-ipq806x: fix wrong naming for gcc_pxo_pll8_pll0
On Fri 21 Jan 15:03 CST 2022, Ansuel Smith wrote:
Please drop the "drivers: " prefix in $subject on all these patches to align it with (most) other entried in the git log.
Thanks,
Bjorn
Quoted 103 lines
Parent
gcc_pxo_pll8_pll0had the parent definition and parent map swapped. Fix this naming error.Signed-off-by Ansuel Smith <[email protected]>--- drivers/clk/qcom/gcc-ipq806x.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-)drivers/clk/qcom/gcc-ipq806x.c +10
-10@@ -291,13 +291,13 @@ static const char * const gcc_pxo_pll3[] = { "pll3", }; -static const struct parent_map gcc_pxo_pll8_pll0[] = { +static const struct parent_map gcc_pxo_pll8_pll0_map[] = { {P_PXO ,0 }, {P_PLL8 ,3 }, {P_PLL0 ,2 } }; -static const char *const gcc_pxo_pll8_pll0_map[] = { +static const char *const gcc_pxo_pll8_pll0[] = {"pxo" ,"pll8_vote" ,"pll0_vote" ,@@ -1993,7 +1993,7 @@ static struct clk_rcg usb30_master_clk_src = { }, .s = { .src_sel_shift = 0, - .parent_map = gcc_pxo_pll8_pll0, + .parent_map = gcc_pxo_pll8_pll0_map, }, .freq_tbl = clk_tbl_usb30_master, .clkr = {@@ -2001,7 +2001,7 @@ static struct clk_rcg usb30_master_clk_src = { .enable_mask = BIT(11), .hw.init = &(struct clk_init_data ){ .name ="usb30_master_ref_src" , - .parent_names = gcc_pxo_pll8_pll0_map, + .parent_names = gcc_pxo_pll8_pll0, .num_parents =3 , .ops = &clk_rcg_ops, .flags =CLK_SET_RATE_GATE ,@@ -2063,7 +2063,7 @@ static struct clk_rcg usb30_utmi_clk = { }, .s = { .src_sel_shift = 0, - .parent_map = gcc_pxo_pll8_pll0, + .parent_map = gcc_pxo_pll8_pll0_map, }, .freq_tbl = clk_tbl_usb30_utmi, .clkr = {@@ -2071,7 +2071,7 @@ static struct clk_rcg usb30_utmi_clk = { .enable_mask = BIT(11), .hw.init = &(struct clk_init_data ){ .name ="usb30_utmi_clk" , - .parent_names = gcc_pxo_pll8_pll0_map, + .parent_names = gcc_pxo_pll8_pll0, .num_parents =3 , .ops = &clk_rcg_ops, .flags =CLK_SET_RATE_GATE ,@@ -2133,7 +2133,7 @@ static struct clk_rcg usb_hs1_xcvr_clk_src = { }, .s = { .src_sel_shift = 0, - .parent_map = gcc_pxo_pll8_pll0, + .parent_map = gcc_pxo_pll8_pll0_map, }, .freq_tbl = clk_tbl_usb, .clkr = {@@ -2141,7 +2141,7 @@ static struct clk_rcg usb_hs1_xcvr_clk_src = { .enable_mask = BIT(11), .hw.init = &(struct clk_init_data ){ .name ="usb_hs1_xcvr_src" , - .parent_names = gcc_pxo_pll8_pll0_map, + .parent_names = gcc_pxo_pll8_pll0, .num_parents =3 , .ops = &clk_rcg_ops, .flags =CLK_SET_RATE_GATE ,@@ -2197,7 +2197,7 @@ static struct clk_rcg usb_fs1_xcvr_clk_src = { }, .s = { .src_sel_shift = 0, - .parent_map = gcc_pxo_pll8_pll0, + .parent_map = gcc_pxo_pll8_pll0_map, }, .freq_tbl = clk_tbl_usb, .clkr = {@@ -2205,7 +2205,7 @@ static struct clk_rcg usb_fs1_xcvr_clk_src = { .enable_mask = BIT(11), .hw.init = &(struct clk_init_data ){ .name ="usb_fs1_xcvr_src" , - .parent_names = gcc_pxo_pll8_pll0_map, + .parent_names = gcc_pxo_pll8_pll0, .num_parents =3 , .ops = &clk_rcg_ops, .flags =CLK_SET_RATE_GATE ,Signature · 1 line
2.33.1
PATCH v3 5/15 drivers: clk: qcom: gcc-ipq806x: convert parent_names to parent_data
In reply to Ansuel SmithConvert parent_names to parent_data to modernize the driver. Where possible use parent_hws directly.
--- drivers/clk/qcom/gcc-ipq806x.c | 286 ++++++++++++++++++++------------- 1 file changed, 173 insertions(+), 113 deletions(-)
drivers/clk/qcom/gcc-ipq806x.c +173 -113
@@ -25,6 +25,10 @@#include "clk-hfpll.h" #include "reset.h" +static const struct clk_parent_data gcc_pxo[] = { + { .fw_name ="pxo" }, +}; +static struct clk_pll pll0 = { .l_reg =0x30c4 , .m_reg =0x30c8 ,
@@ -35,7 +39,7 @@ static struct clk_pll pll0 = { .status_bit = 16, .clkr.hw.init = &(struct clk_init_data ){ .name ="pll0" , - .parent_names = (const char *[]){"pxo" }, + .parent_data = gcc_pxo, .num_parents =1 , .ops = &clk_pll_ops, },
@@ -46,7 +50,9 @@ static struct clk_regmap pll0_vote = { .enable_mask = BIT(0), .hw.init = &(struct clk_init_data ){ .name ="pll0_vote" , - .parent_names = (const char *[]){"pll0" }, + .parent_hws = (const struct clk_hw *[]){ + &pll0.clkr.hw, + }, .num_parents =1 , .ops = &clk_pll_vote_ops, },
@@ -62,7 +68,7 @@ static struct clk_pll pll3 = { .status_bit = 16, .clkr.hw.init = &(struct clk_init_data ){ .name ="pll3" , - .parent_names = (const char *[]){"pxo" }, + .parent_data = gcc_pxo, .num_parents =1 , .ops = &clk_pll_ops, },
@@ -89,7 +95,7 @@ static struct clk_pll pll8 = { .status_bit = 16, .clkr.hw.init = &(struct clk_init_data ){ .name ="pll8" , - .parent_names = (const char *[]){"pxo" }, + .parent_data = gcc_pxo, .num_parents =1 , .ops = &clk_pll_ops, },
@@ -100,7 +106,9 @@ static struct clk_regmap pll8_vote = { .enable_mask = BIT(8), .hw.init = &(struct clk_init_data ){ .name ="pll8_vote" , - .parent_names = (const char *[]){"pll8" }, + .parent_hws = (const struct clk_hw *[]){ + &pll8.clkr.hw, + }, .num_parents =1 , .ops = &clk_pll_vote_ops, },
@@ -123,7 +131,7 @@ static struct hfpll_data hfpll0_data = {static struct clk_hfpll hfpll0 = { .d = &hfpll0_data, .clkr.hw.init = &(struct clk_init_data ){ - .parent_names = (const char *[]){"pxo" }, + .parent_data = gcc_pxo, .num_parents =1 , .name ="hfpll0" , .ops = &clk_ops_hfpll,
@@ -149,7 +157,7 @@ static struct hfpll_data hfpll1_data = {static struct clk_hfpll hfpll1 = { .d = &hfpll1_data, .clkr.hw.init = &(struct clk_init_data ){ - .parent_names = (const char *[]){"pxo" }, + .parent_data = gcc_pxo, .num_parents =1 , .name ="hfpll1" , .ops = &clk_ops_hfpll,
@@ -175,7 +183,7 @@ static struct hfpll_data hfpll_l2_data = {static struct clk_hfpll hfpll_l2 = { .d = &hfpll_l2_data, .clkr.hw.init = &(struct clk_init_data ){ - .parent_names = (const char *[]){"pxo" }, + .parent_data = gcc_pxo, .num_parents =1 , .name ="hfpll_l2" , .ops = &clk_ops_hfpll,
@@ -194,7 +202,7 @@ static struct clk_pll pll14 = { .status_bit = 16, .clkr.hw.init = &(struct clk_init_data ){ .name ="pll14" , - .parent_names = (const char *[]){"pxo" }, + .parent_data = gcc_pxo, .num_parents =1 , .ops = &clk_pll_ops, },
@@ -205,7 +213,9 @@ static struct clk_regmap pll14_vote = { .enable_mask = BIT(14), .hw.init = &(struct clk_init_data ){ .name ="pll14_vote" , - .parent_names = (const char *[]){"pll14" }, + .parent_hws = (const struct clk_hw *[]){ + &pll14.clkr.hw, + }, .num_parents =1 , .ops = &clk_pll_vote_ops, },
@@ -238,7 +248,7 @@ static struct clk_pll pll18 = { .freq_tbl = pll18_freq_tbl, .clkr.hw.init = &(struct clk_init_data ){ .name ="pll18" , - .parent_names = (const char *[]){"pxo" }, + .parent_data = gcc_pxo, .num_parents =1 , .ops = &clk_pll_ops, },
@@ -259,9 +269,9 @@ static const struct parent_map gcc_pxo_pll8_map[] = { { P_PLL8, 3 } }; -static const char *const gcc_pxo_pll8[] = { -"pxo" , -"pll8_vote" , +static const struct clk_parent_data gcc_pxo_pll8[] = { + { .fw_name ="pxo" }, + { .hw = &pll8_vote.hw }, };static const struct parent_map gcc_pxo_pll8_cxo_map[] = {
@@ -270,10 +280,10 @@ static const struct parent_map gcc_pxo_pll8_cxo_map[] = { { P_CXO, 5 } }; -static const char *const gcc_pxo_pll8_cxo[] = { -"pxo" , -"pll8_vote" , -"cxo" , +static const struct clk_parent_data gcc_pxo_pll8_cxo[] = { + { .fw_name ="pxo" }, + { .hw = &pll8_vote.hw }, + { .fw_name ="cxo" }, };static const struct parent_map gcc_pxo_pll3_map[] = {
@@ -286,9 +296,9 @@ static const struct parent_map gcc_pxo_pll3_sata_map[] = { { P_PLL3, 6 } }; -static const char *const gcc_pxo_pll3[] = { -"pxo" , -"pll3" , +static const struct clk_parent_data gcc_pxo_pll3[] = { + { .fw_name ="pxo" }, + { .hw = &pll3.clkr.hw }, };static const struct parent_map gcc_pxo_pll8_pll0_map[] = {
@@ -297,10 +307,10 @@ static const struct parent_map gcc_pxo_pll8_pll0_map[] = { { P_PLL0, 2 } }; -static const char *const gcc_pxo_pll8_pll0[] = { -"pxo" , -"pll8_vote" , -"pll0_vote" , +static const struct clk_parent_data gcc_pxo_pll8_pll0[] = { + { .fw_name ="pxo" }, + { .hw = &pll8_vote.hw }, + { .hw = &pll0_vote.hw }, };static const struct parent_map gcc_pxo_pll8_pll14_pll18_pll0_map[] = {
@@ -311,12 +321,12 @@ static const struct parent_map gcc_pxo_pll8_pll14_pll18_pll0_map[] = { { P_PLL18, 1 } }; -static const char *const gcc_pxo_pll8_pll14_pll18_pll0[] = { -"pxo" , -"pll8_vote" , -"pll0_vote" , -"pll14" , -"pll18" , +static const struct clk_parent_data gcc_pxo_pll8_pll14_pll18_pll0[] = { + { .fw_name ="pxo" }, + { .hw = &pll8_vote.hw }, + { .hw = &pll0_vote.hw }, + { .hw = &pll14.clkr.hw }, + { .hw = &pll18.clkr.hw }, };static struct freq_tbl clk_tbl_gsbi_uart[] = {
@@ -362,7 +372,7 @@ static struct clk_rcg gsbi1_uart_src = { .enable_mask = BIT(11), .hw.init = &(struct clk_init_data ){ .name ="gsbi1_uart_src" , - .parent_names = gcc_pxo_pll8, + .parent_data = gcc_pxo_pll8, .num_parents =2 , .ops = &clk_rcg_ops, .flags =CLK_SET_PARENT_GATE ,
@@ -378,8 +388,8 @@ static struct clk_branch gsbi1_uart_clk = { .enable_mask = BIT(9), .hw.init = &(struct clk_init_data ){ .name ="gsbi1_uart_clk" , - .parent_names = (const char *[]){ -"gsbi1_uart_src" , + .parent_hws = (const struct clk_hw *[]){ + &gsbi1_uart_src.clkr.hw, }, .num_parents =1 , .ops = &clk_branch_ops,
@@ -413,7 +423,7 @@ static struct clk_rcg gsbi2_uart_src = { .enable_mask = BIT(11), .hw.init = &(struct clk_init_data ){ .name ="gsbi2_uart_src" , - .parent_names = gcc_pxo_pll8, + .parent_data = gcc_pxo_pll8, .num_parents =2 , .ops = &clk_rcg_ops, .flags =CLK_SET_PARENT_GATE ,
@@ -429,8 +439,8 @@ static struct clk_branch gsbi2_uart_clk = { .enable_mask = BIT(9), .hw.init = &(struct clk_init_data ){ .name ="gsbi2_uart_clk" , - .parent_names = (const char *[]){ -"gsbi2_uart_src" , + .parent_hws = (const struct clk_hw *[]){ + &gsbi2_uart_src.clkr.hw, }, .num_parents =1 , .ops = &clk_branch_ops,
@@ -464,7 +474,7 @@ static struct clk_rcg gsbi4_uart_src = { .enable_mask = BIT(11), .hw.init = &(struct clk_init_data ){ .name ="gsbi4_uart_src" , - .parent_names = gcc_pxo_pll8, + .parent_data = gcc_pxo_pll8, .num_parents =2 , .ops = &clk_rcg_ops, .flags =CLK_SET_PARENT_GATE ,
@@ -480,8 +490,8 @@ static struct clk_branch gsbi4_uart_clk = { .enable_mask = BIT(9), .hw.init = &(struct clk_init_data ){ .name ="gsbi4_uart_clk" , - .parent_names = (const char *[]){ -"gsbi4_uart_src" , + .parent_hws = (const struct clk_hw *[]){ + &gsbi4_uart_src.clkr.hw, }, .num_parents =1 , .ops = &clk_branch_ops,
@@ -515,7 +525,7 @@ static struct clk_rcg gsbi5_uart_src = { .enable_mask = BIT(11), .hw.init = &(struct clk_init_data ){ .name ="gsbi5_uart_src" , - .parent_names = gcc_pxo_pll8, + .parent_data = gcc_pxo_pll8, .num_parents =2 , .ops = &clk_rcg_ops, .flags =CLK_SET_PARENT_GATE ,
@@ -531,8 +541,8 @@ static struct clk_branch gsbi5_uart_clk = { .enable_mask = BIT(9), .hw.init = &(struct clk_init_data ){ .name ="gsbi5_uart_clk" , - .parent_names = (const char *[]){ -"gsbi5_uart_src" , + .parent_hws = (const struct clk_hw *[]){ + &gsbi5_uart_src.clkr.hw, }, .num_parents =1 , .ops = &clk_branch_ops,
@@ -566,7 +576,7 @@ static struct clk_rcg gsbi6_uart_src = { .enable_mask = BIT(11), .hw.init = &(struct clk_init_data ){ .name ="gsbi6_uart_src" , - .parent_names = gcc_pxo_pll8, + .parent_data = gcc_pxo_pll8, .num_parents =2 , .ops = &clk_rcg_ops, .flags =CLK_SET_PARENT_GATE ,
@@ -582,8 +592,8 @@ static struct clk_branch gsbi6_uart_clk = { .enable_mask = BIT(9), .hw.init = &(struct clk_init_data ){ .name ="gsbi6_uart_clk" , - .parent_names = (const char *[]){ -"gsbi6_uart_src" , + .parent_hws = (const struct clk_hw *[]){ + &gsbi6_uart_src.clkr.hw, }, .num_parents =1 , .ops = &clk_branch_ops,
@@ -617,7 +627,7 @@ static struct clk_rcg gsbi7_uart_src = { .enable_mask = BIT(11), .hw.init = &(struct clk_init_data ){ .name ="gsbi7_uart_src" , - .parent_names = gcc_pxo_pll8, + .parent_data = gcc_pxo_pll8, .num_parents =2 , .ops = &clk_rcg_ops, .flags =CLK_SET_PARENT_GATE ,
@@ -633,8 +643,8 @@ static struct clk_branch gsbi7_uart_clk = { .enable_mask = BIT(9), .hw.init = &(struct clk_init_data ){ .name ="gsbi7_uart_clk" , - .parent_names = (const char *[]){ -"gsbi7_uart_src" , + .parent_hws = (const struct clk_hw *[]){ + &gsbi7_uart_src.clkr.hw, }, .num_parents =1 , .ops = &clk_branch_ops,
@@ -681,7 +691,7 @@ static struct clk_rcg gsbi1_qup_src = { .enable_mask = BIT(11), .hw.init = &(struct clk_init_data ){ .name ="gsbi1_qup_src" , - .parent_names = gcc_pxo_pll8, + .parent_data = gcc_pxo_pll8, .num_parents =2 , .ops = &clk_rcg_ops, .flags =CLK_SET_PARENT_GATE ,
@@ -697,7 +707,9 @@ static struct clk_branch gsbi1_qup_clk = { .enable_mask = BIT(9), .hw.init = &(struct clk_init_data ){ .name ="gsbi1_qup_clk" , - .parent_names = (const char *[]){"gsbi1_qup_src" }, + .parent_hws = (const struct clk_hw *[]){ + &gsbi1_qup_src.clkr.hw, + }, .num_parents =1 , .ops = &clk_branch_ops, .flags =CLK_SET_RATE_PARENT ,
@@ -730,7 +742,7 @@ static struct clk_rcg gsbi2_qup_src = { .enable_mask = BIT(11), .hw.init = &(struct clk_init_data ){ .name ="gsbi2_qup_src" , - .parent_names = gcc_pxo_pll8, + .parent_data = gcc_pxo_pll8, .num_parents =2 , .ops = &clk_rcg_ops, .flags =CLK_SET_PARENT_GATE ,
@@ -746,7 +758,9 @@ static struct clk_branch gsbi2_qup_clk = { .enable_mask = BIT(9), .hw.init = &(struct clk_init_data ){ .name ="gsbi2_qup_clk" , - .parent_names = (const char *[]){"gsbi2_qup_src" }, + .parent_hws = (const struct clk_hw *[]){ + &gsbi2_qup_src.clkr.hw, + }, .num_parents =1 , .ops = &clk_branch_ops, .flags =CLK_SET_RATE_PARENT ,
@@ -779,7 +793,7 @@ static struct clk_rcg gsbi4_qup_src = { .enable_mask = BIT(11), .hw.init = &(struct clk_init_data ){ .name ="gsbi4_qup_src" , - .parent_names = gcc_pxo_pll8, + .parent_data = gcc_pxo_pll8, .num_parents =2 , .ops = &clk_rcg_ops, .flags =CLK_SET_PARENT_GATE ,
@@ -795,7 +809,9 @@ static struct clk_branch gsbi4_qup_clk = { .enable_mask = BIT(9), .hw.init = &(struct clk_init_data ){ .name ="gsbi4_qup_clk" , - .parent_names = (const char *[]){"gsbi4_qup_src" }, + .parent_hws = (const struct clk_hw *[]){ + &gsbi4_qup_src.clkr.hw, + }, .num_parents =1 , .ops = &clk_branch_ops, .flags =CLK_SET_RATE_PARENT ,
@@ -828,7 +844,7 @@ static struct clk_rcg gsbi5_qup_src = { .enable_mask = BIT(11), .hw.init = &(struct clk_init_data ){ .name ="gsbi5_qup_src" , - .parent_names = gcc_pxo_pll8, + .parent_data = gcc_pxo_pll8, .num_parents =2 , .ops = &clk_rcg_ops, .flags =CLK_SET_PARENT_GATE ,
@@ -844,7 +860,9 @@ static struct clk_branch gsbi5_qup_clk = { .enable_mask = BIT(9), .hw.init = &(struct clk_init_data ){ .name ="gsbi5_qup_clk" , - .parent_names = (const char *[]){"gsbi5_qup_src" }, + .parent_hws = (const struct clk_hw *[]){ + &gsbi5_qup_src.clkr.hw, + }, .num_parents =1 , .ops = &clk_branch_ops, .flags =CLK_SET_RATE_PARENT ,
@@ -877,7 +895,7 @@ static struct clk_rcg gsbi6_qup_src = { .enable_mask = BIT(11), .hw.init = &(struct clk_init_data ){ .name ="gsbi6_qup_src" , - .parent_names = gcc_pxo_pll8, + .parent_data = gcc_pxo_pll8, .num_parents =2 , .ops = &clk_rcg_ops, .flags =CLK_SET_PARENT_GATE ,
@@ -893,7 +911,9 @@ static struct clk_branch gsbi6_qup_clk = { .enable_mask = BIT(9), .hw.init = &(struct clk_init_data ){ .name ="gsbi6_qup_clk" , - .parent_names = (const char *[]){"gsbi6_qup_src" }, + .parent_hws = (const struct clk_hw *[]){ + &gsbi6_qup_src.clkr.hw, + }, .num_parents =1 , .ops = &clk_branch_ops, .flags =CLK_SET_RATE_PARENT ,
@@ -926,7 +946,7 @@ static struct clk_rcg gsbi7_qup_src = { .enable_mask = BIT(11), .hw.init = &(struct clk_init_data ){ .name ="gsbi7_qup_src" , - .parent_names = gcc_pxo_pll8, + .parent_data = gcc_pxo_pll8, .num_parents =2 , .ops = &clk_rcg_ops, .flags =CLK_SET_PARENT_GATE ,
@@ -942,7 +962,9 @@ static struct clk_branch gsbi7_qup_clk = { .enable_mask = BIT(9), .hw.init = &(struct clk_init_data ){ .name ="gsbi7_qup_clk" , - .parent_names = (const char *[]){"gsbi7_qup_src" }, + .parent_hws = (const struct clk_hw *[]){ + &gsbi7_qup_src.clkr.hw, + }, .num_parents =1 , .ops = &clk_branch_ops, .flags =CLK_SET_RATE_PARENT ,
@@ -1076,7 +1098,7 @@ static struct clk_rcg gp0_src = { .enable_mask = BIT(11), .hw.init = &(struct clk_init_data ){ .name ="gp0_src" , - .parent_names = gcc_pxo_pll8_cxo, + .parent_data = gcc_pxo_pll8_cxo, .num_parents =3 , .ops = &clk_rcg_ops, .flags =CLK_SET_PARENT_GATE ,
@@ -1092,7 +1114,9 @@ static struct clk_branch gp0_clk = { .enable_mask = BIT(9), .hw.init = &(struct clk_init_data ){ .name ="gp0_clk" , - .parent_names = (const char *[]){"gp0_src" }, + .parent_hws = (const struct clk_hw *[]){ + &gp0_src.clkr.hw, + }, .num_parents =1 , .ops = &clk_branch_ops, .flags =CLK_SET_RATE_PARENT ,
@@ -1125,7 +1149,7 @@ static struct clk_rcg gp1_src = { .enable_mask = BIT(11), .hw.init = &(struct clk_init_data ){ .name ="gp1_src" , - .parent_names = gcc_pxo_pll8_cxo, + .parent_data = gcc_pxo_pll8_cxo, .num_parents =3 , .ops = &clk_rcg_ops, .flags =CLK_SET_RATE_GATE ,
@@ -1141,7 +1165,9 @@ static struct clk_branch gp1_clk = { .enable_mask = BIT(9), .hw.init = &(struct clk_init_data ){ .name ="gp1_clk" , - .parent_names = (const char *[]){"gp1_src" }, + .parent_hws = (const struct clk_hw *[]){ + &gp1_src.clkr.hw, + }, .num_parents =1 , .ops = &clk_branch_ops, .flags =CLK_SET_RATE_PARENT ,
@@ -1174,7 +1200,7 @@ static struct clk_rcg gp2_src = { .enable_mask = BIT(11), .hw.init = &(struct clk_init_data ){ .name ="gp2_src" , - .parent_names = gcc_pxo_pll8_cxo, + .parent_data = gcc_pxo_pll8_cxo, .num_parents =3 , .ops = &clk_rcg_ops, .flags =CLK_SET_RATE_GATE ,
@@ -1190,7 +1216,9 @@ static struct clk_branch gp2_clk = { .enable_mask = BIT(9), .hw.init = &(struct clk_init_data ){ .name ="gp2_clk" , - .parent_names = (const char *[]){"gp2_src" }, + .parent_hws = (const struct clk_hw *[]){ + &gp2_src.clkr.hw, + }, .num_parents =1 , .ops = &clk_branch_ops, .flags =CLK_SET_RATE_PARENT ,
@@ -1228,7 +1256,7 @@ static struct clk_rcg prng_src = { .enable_mask = BIT(11), .hw.init = &(struct clk_init_data ){ .name ="prng_src" , - .parent_names = gcc_pxo_pll8, + .parent_data = gcc_pxo_pll8, .num_parents =2 , .ops = &clk_rcg_ops, },
@@ -1244,7 +1272,9 @@ static struct clk_branch prng_clk = { .enable_mask = BIT(10), .hw.init = &(struct clk_init_data ){ .name ="prng_clk" , - .parent_names = (const char *[]){"prng_src" }, + .parent_hws = (const struct clk_hw *[]){ + &prng_src.clkr.hw, + }, .num_parents =1 , .ops = &clk_branch_ops, },
@@ -1290,7 +1320,7 @@ static struct clk_rcg sdc1_src = { .enable_mask = BIT(11), .hw.init = &(struct clk_init_data ){ .name ="sdc1_src" , - .parent_names = gcc_pxo_pll8, + .parent_data = gcc_pxo_pll8, .num_parents =2 , .ops = &clk_rcg_ops, },
@@ -1305,7 +1335,9 @@ static struct clk_branch sdc1_clk = { .enable_mask = BIT(9), .hw.init = &(struct clk_init_data ){ .name ="sdc1_clk" , - .parent_names = (const char *[]){"sdc1_src" }, + .parent_hws = (const struct clk_hw *[]){ + &sdc1_src.clkr.hw, + }, .num_parents =1 , .ops = &clk_branch_ops, .flags =CLK_SET_RATE_PARENT ,
@@ -1338,7 +1370,7 @@ static struct clk_rcg sdc3_src = { .enable_mask = BIT(11), .hw.init = &(struct clk_init_data ){ .name ="sdc3_src" , - .parent_names = gcc_pxo_pll8, + .parent_data = gcc_pxo_pll8, .num_parents =2 , .ops = &clk_rcg_ops, },
@@ -1353,7 +1385,9 @@ static struct clk_branch sdc3_clk = { .enable_mask = BIT(9), .hw.init = &(struct clk_init_data ){ .name ="sdc3_clk" , - .parent_names = (const char *[]){"sdc3_src" }, + .parent_hws = (const struct clk_hw *[]){ + &sdc3_src.clkr.hw, + }, .num_parents =1 , .ops = &clk_branch_ops, .flags =CLK_SET_RATE_PARENT ,
@@ -1421,7 +1455,7 @@ static struct clk_rcg tsif_ref_src = { .enable_mask = BIT(11), .hw.init = &(struct clk_init_data ){ .name ="tsif_ref_src" , - .parent_names = gcc_pxo_pll8, + .parent_data = gcc_pxo_pll8, .num_parents =2 , .ops = &clk_rcg_ops, },
@@ -1436,7 +1470,9 @@ static struct clk_branch tsif_ref_clk = { .enable_mask = BIT(9), .hw.init = &(struct clk_init_data ){ .name ="tsif_ref_clk" , - .parent_names = (const char *[]){"tsif_ref_src" }, + .parent_hws = (const struct clk_hw *[]){ + &tsif_ref_src.clkr.hw, + }, .num_parents =1 , .ops = &clk_branch_ops, .flags =CLK_SET_RATE_PARENT ,
@@ -1583,7 +1619,7 @@ static struct clk_rcg pcie_ref_src = { .enable_mask = BIT(11), .hw.init = &(struct clk_init_data ){ .name ="pcie_ref_src" , - .parent_names = gcc_pxo_pll3, + .parent_data = gcc_pxo_pll3, .num_parents =2 , .ops = &clk_rcg_ops, .flags =CLK_SET_RATE_GATE ,
@@ -1599,7 +1635,9 @@ static struct clk_branch pcie_ref_src_clk = { .enable_mask = BIT(9), .hw.init = &(struct clk_init_data ){ .name ="pcie_ref_src_clk" , - .parent_names = (const char *[]){"pcie_ref_src" }, + .parent_hws = (const struct clk_hw *[]){ + &pcie_ref_src.clkr.hw, + }, .num_parents =1 , .ops = &clk_branch_ops, .flags =CLK_SET_RATE_PARENT ,
@@ -1675,7 +1713,7 @@ static struct clk_rcg pcie1_ref_src = { .enable_mask = BIT(11), .hw.init = &(struct clk_init_data ){ .name ="pcie1_ref_src" , - .parent_names = gcc_pxo_pll3, + .parent_data = gcc_pxo_pll3, .num_parents =2 , .ops = &clk_rcg_ops, .flags =CLK_SET_RATE_GATE ,
@@ -1691,7 +1729,9 @@ static struct clk_branch pcie1_ref_src_clk = { .enable_mask = BIT(9), .hw.init = &(struct clk_init_data ){ .name ="pcie1_ref_src_clk" , - .parent_names = (const char *[]){"pcie1_ref_src" }, + .parent_hws = (const struct clk_hw *[]){ + &pcie1_ref_src.clkr.hw, + }, .num_parents =1 , .ops = &clk_branch_ops, .flags =CLK_SET_RATE_PARENT ,
@@ -1767,7 +1807,7 @@ static struct clk_rcg pcie2_ref_src = { .enable_mask = BIT(11), .hw.init = &(struct clk_init_data ){ .name ="pcie2_ref_src" , - .parent_names = gcc_pxo_pll3, + .parent_data = gcc_pxo_pll3, .num_parents =2 , .ops = &clk_rcg_ops, .flags =CLK_SET_RATE_GATE ,
@@ -1783,7 +1823,9 @@ static struct clk_branch pcie2_ref_src_clk = { .enable_mask = BIT(9), .hw.init = &(struct clk_init_data ){ .name ="pcie2_ref_src_clk" , - .parent_names = (const char *[]){"pcie2_ref_src" }, + .parent_hws = (const struct clk_hw *[]){ + &pcie2_ref_src.clkr.hw, + }, .num_parents =1 , .ops = &clk_branch_ops, .flags =CLK_SET_RATE_PARENT ,
@@ -1864,7 +1906,7 @@ static struct clk_rcg sata_ref_src = { .enable_mask = BIT(7), .hw.init = &(struct clk_init_data ){ .name ="sata_ref_src" , - .parent_names = gcc_pxo_pll3, + .parent_data = gcc_pxo_pll3, .num_parents =2 , .ops = &clk_rcg_ops, .flags =CLK_SET_RATE_GATE ,
@@ -1880,7 +1922,9 @@ static struct clk_branch sata_rxoob_clk = { .enable_mask = BIT(4), .hw.init = &(struct clk_init_data ){ .name ="sata_rxoob_clk" , - .parent_names = (const char *[]){"sata_ref_src" }, + .parent_hws = (const struct clk_hw *[]){ + &sata_ref_src.clkr.hw, + }, .num_parents =1 , .ops = &clk_branch_ops, .flags =CLK_SET_RATE_PARENT ,
@@ -1896,7 +1940,9 @@ static struct clk_branch sata_pmalive_clk = { .enable_mask = BIT(4), .hw.init = &(struct clk_init_data ){ .name ="sata_pmalive_clk" , - .parent_names = (const char *[]){"sata_ref_src" }, + .parent_hws = (const struct clk_hw *[]){ + &sata_ref_src.clkr.hw, + }, .num_parents =1 , .ops = &clk_branch_ops, .flags =CLK_SET_RATE_PARENT ,
@@ -1912,7 +1958,7 @@ static struct clk_branch sata_phy_ref_clk = { .enable_mask = BIT(4), .hw.init = &(struct clk_init_data ){ .name ="sata_phy_ref_clk" , - .parent_names = (const char *[]){"pxo" }, + .parent_data = gcc_pxo, .num_parents =1 , .ops = &clk_branch_ops, },
@@ -2001,7 +2047,7 @@ static struct clk_rcg usb30_master_clk_src = { .enable_mask = BIT(11), .hw.init = &(struct clk_init_data ){ .name ="usb30_master_ref_src" , - .parent_names = gcc_pxo_pll8_pll0, + .parent_data = gcc_pxo_pll8_pll0, .num_parents =3 , .ops = &clk_rcg_ops, .flags =CLK_SET_RATE_GATE ,
@@ -2017,7 +2063,9 @@ static struct clk_branch usb30_0_branch_clk = { .enable_mask = BIT(4), .hw.init = &(struct clk_init_data ){ .name ="usb30_0_branch_clk" , - .parent_names = (const char *[]){"usb30_master_ref_src" , }, + .parent_hws = (const struct clk_hw *[]){ + &usb30_master_clk_src.clkr.hw, + }, .num_parents =1 , .ops = &clk_branch_ops, .flags =CLK_SET_RATE_PARENT ,
@@ -2033,7 +2081,9 @@ static struct clk_branch usb30_1_branch_clk = { .enable_mask = BIT(4), .hw.init = &(struct clk_init_data ){ .name ="usb30_1_branch_clk" , - .parent_names = (const char *[]){"usb30_master_ref_src" , }, + .parent_hws = (const struct clk_hw *[]){ + &usb30_master_clk_src.clkr.hw, + }, .num_parents =1 , .ops = &clk_branch_ops, .flags =CLK_SET_RATE_PARENT ,
@@ -2071,7 +2121,7 @@ static struct clk_rcg usb30_utmi_clk = { .enable_mask = BIT(11), .hw.init = &(struct clk_init_data ){ .name ="usb30_utmi_clk" , - .parent_names = gcc_pxo_pll8_pll0, + .parent_data = gcc_pxo_pll8_pll0, .num_parents =3 , .ops = &clk_rcg_ops, .flags =CLK_SET_RATE_GATE ,
@@ -2087,7 +2137,9 @@ static struct clk_branch usb30_0_utmi_clk_ctl = { .enable_mask = BIT(4), .hw.init = &(struct clk_init_data ){ .name ="usb30_0_utmi_clk_ctl" , - .parent_names = (const char *[]){"usb30_utmi_clk" , }, + .parent_hws = (const struct clk_hw *[]){ + &usb30_utmi_clk.clkr.hw, + }, .num_parents =1 , .ops = &clk_branch_ops, .flags =CLK_SET_RATE_PARENT ,
@@ -2103,7 +2155,9 @@ static struct clk_branch usb30_1_utmi_clk_ctl = { .enable_mask = BIT(4), .hw.init = &(struct clk_init_data ){ .name ="usb30_1_utmi_clk_ctl" , - .parent_names = (const char *[]){"usb30_utmi_clk" , }, + .parent_hws = (const struct clk_hw *[]){ + &usb30_utmi_clk.clkr.hw, + }, .num_parents =1 , .ops = &clk_branch_ops, .flags =CLK_SET_RATE_PARENT ,
@@ -2141,7 +2195,7 @@ static struct clk_rcg usb_hs1_xcvr_clk_src = { .enable_mask = BIT(11), .hw.init = &(struct clk_init_data ){ .name ="usb_hs1_xcvr_src" , - .parent_names = gcc_pxo_pll8_pll0, + .parent_data = gcc_pxo_pll8_pll0, .num_parents =3 , .ops = &clk_rcg_ops, .flags =CLK_SET_RATE_GATE ,
@@ -2157,7 +2211,9 @@ static struct clk_branch usb_hs1_xcvr_clk = { .enable_mask = BIT(9), .hw.init = &(struct clk_init_data ){ .name ="usb_hs1_xcvr_clk" , - .parent_names = (const char *[]){"usb_hs1_xcvr_src" }, + .parent_hws = (const struct clk_hw *[]){ + &usb_hs1_xcvr_clk_src.clkr.hw, + }, .num_parents =1 , .ops = &clk_branch_ops, .flags =CLK_SET_RATE_PARENT ,
@@ -2205,7 +2261,7 @@ static struct clk_rcg usb_fs1_xcvr_clk_src = { .enable_mask = BIT(11), .hw.init = &(struct clk_init_data ){ .name ="usb_fs1_xcvr_src" , - .parent_names = gcc_pxo_pll8_pll0, + .parent_data = gcc_pxo_pll8_pll0, .num_parents =3 , .ops = &clk_rcg_ops, .flags =CLK_SET_RATE_GATE ,
@@ -2221,7 +2277,9 @@ static struct clk_branch usb_fs1_xcvr_clk = { .enable_mask = BIT(9), .hw.init = &(struct clk_init_data ){ .name ="usb_fs1_xcvr_clk" , - .parent_names = (const char *[]){"usb_fs1_xcvr_src" , }, + .parent_hws = (const struct clk_hw *[]){ + &usb_fs1_xcvr_clk_src.clkr.hw, + }, .num_parents =1 , .ops = &clk_branch_ops, .flags =CLK_SET_RATE_PARENT ,
@@ -2237,7 +2295,9 @@ static struct clk_branch usb_fs1_sys_clk = { .enable_mask = BIT(4), .hw.init = &(struct clk_init_data ){ .name ="usb_fs1_sys_clk" , - .parent_names = (const char *[]){"usb_fs1_xcvr_src" , }, + .parent_hws = (const struct clk_hw *[]){ + &usb_fs1_xcvr_clk_src.clkr.hw, + }, .num_parents =1 , .ops = &clk_branch_ops, .flags =CLK_SET_RATE_PARENT ,
@@ -2337,7 +2397,7 @@ static struct clk_dyn_rcg gmac_core1_src = { .enable_mask = BIT(1), .hw.init = &(struct clk_init_data ){ .name ="gmac_core1_src" , - .parent_names = gcc_pxo_pll8_pll14_pll18_pll0, + .parent_data = gcc_pxo_pll8_pll14_pll18_pll0, .num_parents =5 , .ops = &clk_dyn_rcg_ops, },
@@ -2354,8 +2414,8 @@ static struct clk_branch gmac_core1_clk = { .enable_mask = BIT(4), .hw.init = &(struct clk_init_data ){ .name ="gmac_core1_clk" , - .parent_names = (const char *[]){ -"gmac_core1_src" , + .parent_hws = (const struct clk_hw *[]){ + &gmac_core1_src.clkr.hw, }, .num_parents =1 , .ops = &clk_branch_ops,
@@ -2409,7 +2469,7 @@ static struct clk_dyn_rcg gmac_core2_src = { .enable_mask = BIT(1), .hw.init = &(struct clk_init_data ){ .name ="gmac_core2_src" , - .parent_names = gcc_pxo_pll8_pll14_pll18_pll0, + .parent_data = gcc_pxo_pll8_pll14_pll18_pll0, .num_parents =5 , .ops = &clk_dyn_rcg_ops, },
@@ -2426,8 +2486,8 @@ static struct clk_branch gmac_core2_clk = { .enable_mask = BIT(4), .hw.init = &(struct clk_init_data ){ .name ="gmac_core2_clk" , - .parent_names = (const char *[]){ -"gmac_core2_src" , + .parent_hws = (const struct clk_hw *[]){ + &gmac_core2_src.clkr.hw, }, .num_parents =1 , .ops = &clk_branch_ops,
@@ -2481,7 +2541,7 @@ static struct clk_dyn_rcg gmac_core3_src = { .enable_mask = BIT(1), .hw.init = &(struct clk_init_data ){ .name ="gmac_core3_src" , - .parent_names = gcc_pxo_pll8_pll14_pll18_pll0, + .parent_data = gcc_pxo_pll8_pll14_pll18_pll0, .num_parents =5 , .ops = &clk_dyn_rcg_ops, },
@@ -2498,8 +2558,8 @@ static struct clk_branch gmac_core3_clk = { .enable_mask = BIT(4), .hw.init = &(struct clk_init_data ){ .name ="gmac_core3_clk" , - .parent_names = (const char *[]){ -"gmac_core3_src" , + .parent_hws = (const struct clk_hw *[]){ + &gmac_core3_src.clkr.hw, }, .num_parents =1 , .ops = &clk_branch_ops,
@@ -2553,7 +2613,7 @@ static struct clk_dyn_rcg gmac_core4_src = { .enable_mask = BIT(1), .hw.init = &(struct clk_init_data ){ .name ="gmac_core4_src" , - .parent_names = gcc_pxo_pll8_pll14_pll18_pll0, + .parent_data = gcc_pxo_pll8_pll14_pll18_pll0, .num_parents =5 , .ops = &clk_dyn_rcg_ops, },
@@ -2570,8 +2630,8 @@ static struct clk_branch gmac_core4_clk = { .enable_mask = BIT(4), .hw.init = &(struct clk_init_data ){ .name ="gmac_core4_clk" , - .parent_names = (const char *[]){ -"gmac_core4_src" , + .parent_hws = (const struct clk_hw *[]){ + &gmac_core4_src.clkr.hw, }, .num_parents =1 , .ops = &clk_branch_ops,
@@ -2613,7 +2673,7 @@ static struct clk_dyn_rcg nss_tcm_src = { .enable_mask = BIT(1), .hw.init = &(struct clk_init_data ){ .name ="nss_tcm_src" , - .parent_names = gcc_pxo_pll8_pll14_pll18_pll0, + .parent_data = gcc_pxo_pll8_pll14_pll18_pll0, .num_parents =5 , .ops = &clk_dyn_rcg_ops, },
@@ -2628,8 +2688,8 @@ static struct clk_branch nss_tcm_clk = { .enable_mask = BIT(6) | BIT(4), .hw.init = &(struct clk_init_data ){ .name ="nss_tcm_clk" , - .parent_names = (const char *[]){ -"nss_tcm_src" , + .parent_hws = (const struct clk_hw *[]){ + &nss_tcm_src.clkr.hw, }, .num_parents =1 , .ops = &clk_branch_ops,
@@ -2691,7 +2751,7 @@ static struct clk_dyn_rcg ubi32_core1_src_clk = { .enable_mask = BIT(1), .hw.init = &(struct clk_init_data ){ .name ="ubi32_core1_src_clk" , - .parent_names = gcc_pxo_pll8_pll14_pll18_pll0, + .parent_data = gcc_pxo_pll8_pll14_pll18_pll0, .num_parents =5 , .ops = &clk_dyn_rcg_ops, .flags =CLK_SET_RATE_PARENT |CLK_GET_RATE_NOCACHE ,
@@ -2744,7 +2804,7 @@ static struct clk_dyn_rcg ubi32_core2_src_clk = { .enable_mask = BIT(1), .hw.init = &(struct clk_init_data ){ .name ="ubi32_core2_src_clk" , - .parent_names = gcc_pxo_pll8_pll14_pll18_pll0, + .parent_data = gcc_pxo_pll8_pll14_pll18_pll0, .num_parents =5 , .ops = &clk_dyn_rcg_ops, .flags =CLK_SET_RATE_PARENT |CLK_GET_RATE_NOCACHE ,
Signature · 1 line
2.33.1
PATCH v3 6/15 drivers: clk: qcom: gcc-ipq806x: use ARRAY_SIZE for num_parents
In reply to Ansuel SmithUse ARRAY_SIZE for num_parents instead of hardcoding the value.
--- drivers/clk/qcom/gcc-ipq806x.c | 68 +++++++++++++++++----------------- 1 file changed, 34 insertions(+), 34 deletions(-)
drivers/clk/qcom/gcc-ipq806x.c +34 -34
@@ -373,7 +373,7 @@ static struct clk_rcg gsbi1_uart_src = { .hw.init = &(struct clk_init_data){ .name ="gsbi1_uart_src" , .parent_data = gcc_pxo_pll8, - .num_parents =2 , + .num_parents =ARRAY_SIZE (gcc_pxo_pll8), .ops = &clk_rcg_ops, .flags =CLK_SET_PARENT_GATE , },
@@ -424,7 +424,7 @@ static struct clk_rcg gsbi2_uart_src = { .hw.init = &(struct clk_init_data){ .name ="gsbi2_uart_src" , .parent_data = gcc_pxo_pll8, - .num_parents =2 , + .num_parents =ARRAY_SIZE (gcc_pxo_pll8), .ops = &clk_rcg_ops, .flags =CLK_SET_PARENT_GATE , },
@@ -475,7 +475,7 @@ static struct clk_rcg gsbi4_uart_src = { .hw.init = &(struct clk_init_data){ .name ="gsbi4_uart_src" , .parent_data = gcc_pxo_pll8, - .num_parents =2 , + .num_parents =ARRAY_SIZE (gcc_pxo_pll8), .ops = &clk_rcg_ops, .flags =CLK_SET_PARENT_GATE , },
@@ -526,7 +526,7 @@ static struct clk_rcg gsbi5_uart_src = { .hw.init = &(struct clk_init_data){ .name ="gsbi5_uart_src" , .parent_data = gcc_pxo_pll8, - .num_parents =2 , + .num_parents =ARRAY_SIZE (gcc_pxo_pll8), .ops = &clk_rcg_ops, .flags =CLK_SET_PARENT_GATE , },
@@ -577,7 +577,7 @@ static struct clk_rcg gsbi6_uart_src = { .hw.init = &(struct clk_init_data){ .name ="gsbi6_uart_src" , .parent_data = gcc_pxo_pll8, - .num_parents =2 , + .num_parents =ARRAY_SIZE (gcc_pxo_pll8), .ops = &clk_rcg_ops, .flags =CLK_SET_PARENT_GATE , },
@@ -628,7 +628,7 @@ static struct clk_rcg gsbi7_uart_src = { .hw.init = &(struct clk_init_data){ .name ="gsbi7_uart_src" , .parent_data = gcc_pxo_pll8, - .num_parents =2 , + .num_parents =ARRAY_SIZE (gcc_pxo_pll8), .ops = &clk_rcg_ops, .flags =CLK_SET_PARENT_GATE , },
@@ -692,7 +692,7 @@ static struct clk_rcg gsbi1_qup_src = { .hw.init = &(struct clk_init_data){ .name ="gsbi1_qup_src" , .parent_data = gcc_pxo_pll8, - .num_parents =2 , + .num_parents =ARRAY_SIZE (gcc_pxo_pll8), .ops = &clk_rcg_ops, .flags =CLK_SET_PARENT_GATE , },
@@ -743,7 +743,7 @@ static struct clk_rcg gsbi2_qup_src = { .hw.init = &(struct clk_init_data){ .name ="gsbi2_qup_src" , .parent_data = gcc_pxo_pll8, - .num_parents =2 , + .num_parents =ARRAY_SIZE (gcc_pxo_pll8), .ops = &clk_rcg_ops, .flags =CLK_SET_PARENT_GATE , },
@@ -794,7 +794,7 @@ static struct clk_rcg gsbi4_qup_src = { .hw.init = &(struct clk_init_data){ .name ="gsbi4_qup_src" , .parent_data = gcc_pxo_pll8, - .num_parents =2 , + .num_parents =ARRAY_SIZE (gcc_pxo_pll8), .ops = &clk_rcg_ops, .flags =CLK_SET_PARENT_GATE , },
@@ -845,7 +845,7 @@ static struct clk_rcg gsbi5_qup_src = { .hw.init = &(struct clk_init_data){ .name ="gsbi5_qup_src" , .parent_data = gcc_pxo_pll8, - .num_parents =2 , + .num_parents =ARRAY_SIZE (gcc_pxo_pll8), .ops = &clk_rcg_ops, .flags =CLK_SET_PARENT_GATE , },
@@ -896,7 +896,7 @@ static struct clk_rcg gsbi6_qup_src = { .hw.init = &(struct clk_init_data){ .name ="gsbi6_qup_src" , .parent_data = gcc_pxo_pll8, - .num_parents =2 , + .num_parents =ARRAY_SIZE (gcc_pxo_pll8), .ops = &clk_rcg_ops, .flags =CLK_SET_PARENT_GATE , },
@@ -947,7 +947,7 @@ static struct clk_rcg gsbi7_qup_src = { .hw.init = &(struct clk_init_data){ .name ="gsbi7_qup_src" , .parent_data = gcc_pxo_pll8, - .num_parents =2 , + .num_parents =ARRAY_SIZE (gcc_pxo_pll8), .ops = &clk_rcg_ops, .flags =CLK_SET_PARENT_GATE , },
@@ -1099,7 +1099,7 @@ static struct clk_rcg gp0_src = { .hw.init = &(struct clk_init_data){ .name ="gp0_src" , .parent_data = gcc_pxo_pll8_cxo, - .num_parents =3 , + .num_parents =ARRAY_SIZE (gcc_pxo_pll8_cxo), .ops = &clk_rcg_ops, .flags =CLK_SET_PARENT_GATE , },
@@ -1150,7 +1150,7 @@ static struct clk_rcg gp1_src = { .hw.init = &(struct clk_init_data){ .name ="gp1_src" , .parent_data = gcc_pxo_pll8_cxo, - .num_parents =3 , + .num_parents =ARRAY_SIZE (gcc_pxo_pll8_cxo), .ops = &clk_rcg_ops, .flags =CLK_SET_RATE_GATE , },
@@ -1201,7 +1201,7 @@ static struct clk_rcg gp2_src = { .hw.init = &(struct clk_init_data){ .name ="gp2_src" , .parent_data = gcc_pxo_pll8_cxo, - .num_parents =3 , + .num_parents =ARRAY_SIZE (gcc_pxo_pll8_cxo), .ops = &clk_rcg_ops, .flags =CLK_SET_RATE_GATE , },
@@ -1257,7 +1257,7 @@ static struct clk_rcg prng_src = { .hw.init = &(struct clk_init_data){ .name ="prng_src" , .parent_data = gcc_pxo_pll8, - .num_parents =2 , + .num_parents =ARRAY_SIZE (gcc_pxo_pll8), .ops = &clk_rcg_ops, }, },
@@ -1321,7 +1321,7 @@ static struct clk_rcg sdc1_src = { .hw.init = &(struct clk_init_data){ .name ="sdc1_src" , .parent_data = gcc_pxo_pll8, - .num_parents =2 , + .num_parents =ARRAY_SIZE (gcc_pxo_pll8), .ops = &clk_rcg_ops, }, }
@@ -1371,7 +1371,7 @@ static struct clk_rcg sdc3_src = { .hw.init = &(struct clk_init_data){ .name ="sdc3_src" , .parent_data = gcc_pxo_pll8, - .num_parents =2 , + .num_parents =ARRAY_SIZE (gcc_pxo_pll8), .ops = &clk_rcg_ops, }, }
@@ -1456,7 +1456,7 @@ static struct clk_rcg tsif_ref_src = { .hw.init = &(struct clk_init_data){ .name ="tsif_ref_src" , .parent_data = gcc_pxo_pll8, - .num_parents =2 , + .num_parents =ARRAY_SIZE (gcc_pxo_pll8), .ops = &clk_rcg_ops, }, }
@@ -1620,7 +1620,7 @@ static struct clk_rcg pcie_ref_src = { .hw.init = &(struct clk_init_data){ .name ="pcie_ref_src" , .parent_data = gcc_pxo_pll3, - .num_parents =2 , + .num_parents =ARRAY_SIZE (gcc_pxo_pll3), .ops = &clk_rcg_ops, .flags =CLK_SET_RATE_GATE , },
@@ -1714,7 +1714,7 @@ static struct clk_rcg pcie1_ref_src = { .hw.init = &(struct clk_init_data){ .name ="pcie1_ref_src" , .parent_data = gcc_pxo_pll3, - .num_parents =2 , + .num_parents =ARRAY_SIZE (gcc_pxo_pll3), .ops = &clk_rcg_ops, .flags =CLK_SET_RATE_GATE , },
@@ -1808,7 +1808,7 @@ static struct clk_rcg pcie2_ref_src = { .hw.init = &(struct clk_init_data){ .name ="pcie2_ref_src" , .parent_data = gcc_pxo_pll3, - .num_parents =2 , + .num_parents =ARRAY_SIZE (gcc_pxo_pll3), .ops = &clk_rcg_ops, .flags =CLK_SET_RATE_GATE , },
@@ -1907,7 +1907,7 @@ static struct clk_rcg sata_ref_src = { .hw.init = &(struct clk_init_data){ .name ="sata_ref_src" , .parent_data = gcc_pxo_pll3, - .num_parents =2 , + .num_parents =ARRAY_SIZE (gcc_pxo_pll3), .ops = &clk_rcg_ops, .flags =CLK_SET_RATE_GATE , },
@@ -2048,7 +2048,7 @@ static struct clk_rcg usb30_master_clk_src = { .hw.init = &(struct clk_init_data){ .name ="usb30_master_ref_src" , .parent_data = gcc_pxo_pll8_pll0, - .num_parents =3 , + .num_parents =ARRAY_SIZE (gcc_pxo_pll8_pll0), .ops = &clk_rcg_ops, .flags =CLK_SET_RATE_GATE , },
@@ -2122,7 +2122,7 @@ static struct clk_rcg usb30_utmi_clk = { .hw.init = &(struct clk_init_data){ .name ="usb30_utmi_clk" , .parent_data = gcc_pxo_pll8_pll0, - .num_parents =3 , + .num_parents =ARRAY_SIZE (gcc_pxo_pll8_pll0), .ops = &clk_rcg_ops, .flags =CLK_SET_RATE_GATE , },
@@ -2196,7 +2196,7 @@ static struct clk_rcg usb_hs1_xcvr_clk_src = { .hw.init = &(struct clk_init_data){ .name ="usb_hs1_xcvr_src" , .parent_data = gcc_pxo_pll8_pll0, - .num_parents =3 , + .num_parents =ARRAY_SIZE (gcc_pxo_pll8_pll0), .ops = &clk_rcg_ops, .flags =CLK_SET_RATE_GATE , },
@@ -2262,7 +2262,7 @@ static struct clk_rcg usb_fs1_xcvr_clk_src = { .hw.init = &(struct clk_init_data){ .name ="usb_fs1_xcvr_src" , .parent_data = gcc_pxo_pll8_pll0, - .num_parents =3 , + .num_parents =ARRAY_SIZE (gcc_pxo_pll8_pll0), .ops = &clk_rcg_ops, .flags =CLK_SET_RATE_GATE , },
@@ -2398,7 +2398,7 @@ static struct clk_dyn_rcg gmac_core1_src = { .hw.init = &(struct clk_init_data){ .name ="gmac_core1_src" , .parent_data = gcc_pxo_pll8_pll14_pll18_pll0, - .num_parents =5 , + .num_parents =ARRAY_SIZE (gcc_pxo_pll8_pll14_pll18_pll0), .ops = &clk_dyn_rcg_ops, }, },
@@ -2470,7 +2470,7 @@ static struct clk_dyn_rcg gmac_core2_src = { .hw.init = &(struct clk_init_data){ .name ="gmac_core2_src" , .parent_data = gcc_pxo_pll8_pll14_pll18_pll0, - .num_parents =5 , + .num_parents =ARRAY_SIZE (gcc_pxo_pll8_pll14_pll18_pll0), .ops = &clk_dyn_rcg_ops, }, },
@@ -2542,7 +2542,7 @@ static struct clk_dyn_rcg gmac_core3_src = { .hw.init = &(struct clk_init_data){ .name ="gmac_core3_src" , .parent_data = gcc_pxo_pll8_pll14_pll18_pll0, - .num_parents =5 , + .num_parents =ARRAY_SIZE (gcc_pxo_pll8_pll14_pll18_pll0), .ops = &clk_dyn_rcg_ops, }, },
@@ -2614,7 +2614,7 @@ static struct clk_dyn_rcg gmac_core4_src = { .hw.init = &(struct clk_init_data){ .name ="gmac_core4_src" , .parent_data = gcc_pxo_pll8_pll14_pll18_pll0, - .num_parents =5 , + .num_parents =ARRAY_SIZE (gcc_pxo_pll8_pll14_pll18_pll0), .ops = &clk_dyn_rcg_ops, }, },
@@ -2674,7 +2674,7 @@ static struct clk_dyn_rcg nss_tcm_src = { .hw.init = &(struct clk_init_data){ .name ="nss_tcm_src" , .parent_data = gcc_pxo_pll8_pll14_pll18_pll0, - .num_parents =5 , + .num_parents =ARRAY_SIZE (gcc_pxo_pll8_pll14_pll18_pll0), .ops = &clk_dyn_rcg_ops, }, },
@@ -2752,7 +2752,7 @@ static struct clk_dyn_rcg ubi32_core1_src_clk = { .hw.init = &(struct clk_init_data){ .name ="ubi32_core1_src_clk" , .parent_data = gcc_pxo_pll8_pll14_pll18_pll0, - .num_parents =5 , + .num_parents =ARRAY_SIZE (gcc_pxo_pll8_pll14_pll18_pll0), .ops = &clk_dyn_rcg_ops, .flags =CLK_SET_RATE_PARENT |CLK_GET_RATE_NOCACHE , },
@@ -2805,7 +2805,7 @@ static struct clk_dyn_rcg ubi32_core2_src_clk = { .hw.init = &(struct clk_init_data){ .name ="ubi32_core2_src_clk" , .parent_data = gcc_pxo_pll8_pll14_pll18_pll0, - .num_parents =5 , + .num_parents =ARRAY_SIZE (gcc_pxo_pll8_pll14_pll18_pll0), .ops = &clk_dyn_rcg_ops, .flags =CLK_SET_RATE_PARENT |CLK_GET_RATE_NOCACHE , },
Signature · 1 line
2.33.1
PATCH v3 7/15 drivers: clk: qcom: gcc-ipq806x: drop hardcoded pxo and cxo source clk
In reply to Ansuel SmithWe now define these clk in dts. Drop pxo and cxo hardcoded in the gcc probe function.
--- drivers/clk/qcom/gcc-ipq806x.c | 11 +---------- 1 file changed, 1 insertion(+), 10 deletions(-)
drivers/clk/qcom/gcc-ipq806x.c +1 -10
@@ -3119,23 +3119,14 @@ MODULE_DEVICE_TABLE(of, gcc_ipq806x_match_table);static int gcc_ipq806x_probe (struct platform_device *pdev) { -struct device *dev = &pdev->dev;struct regmap *regmap;int ret; - ret =qcom_cc_register_board_clk (dev,"cxo_board" ,"cxo" ,25000000 ); -if (ret) -return ret; - - ret =qcom_cc_register_board_clk (dev,"pxo_board" ,"pxo" ,25000000 ); -if (ret) -return ret; - ret =qcom_cc_probe (pdev, &gcc_ipq806x_desc);if (ret)return ret; - regmap =dev_get_regmap (dev,NULL ); + regmap =dev_get_regmap (&pdev->dev,NULL );if (!regmap)return -ENODEV ;
Signature · 1 line
2.33.1
PATCH v3 8/15 drivers: clk: qcom: gcc-ipq806x: add additional freq nss cores
In reply to Ansuel SmithIpq8065 SoC (an evolution of ipq8064 SoC) contains nss cores that can be clocked to 800MHz. Add these missing freq to the gcc driver.
--- drivers/clk/qcom/gcc-ipq806x.c | 4 ++++ 1 file changed, 4 insertions(+)
drivers/clk/qcom/gcc-ipq806x.c +4 -0
@@ -232,7 +232,9 @@ static struct clk_regmap pll14_vote = {static struct pll_freq_tbl pll18_freq_tbl[] = {NSS_PLL_RATE (550000000 ,44 ,0 ,1 ,0x01495625 ), +NSS_PLL_RATE (600000000 ,48 ,0 ,1 ,0x01495625 ),NSS_PLL_RATE (733000000 ,58 ,16 ,25 ,0x014b5625 ), +NSS_PLL_RATE (800000000 ,64 ,0 ,1 ,0x01495625 ), };static struct clk_pll pll18 = {
@@ -2702,7 +2704,9 @@ static const struct freq_tbl clk_tbl_nss[] = { { 110000000, P_PLL18, 1, 1, 5 }, { 275000000, P_PLL18, 2, 0, 0 }, { 550000000, P_PLL18, 1, 0, 0 }, + { 600000000, P_PLL18, 1, 0, 0 }, { 733000000, P_PLL18, 1, 0, 0 }, + { 800000000, P_PLL18, 1, 0, 0 }, { } };
Signature · 1 line
2.33.1
PATCH v3 9/15 drivers: clk: qcom: gcc-ipq806x: add unusued flag for critical clock
In reply to Ansuel SmithSome clocks are used by other devices present on the SoC. For example the gsbi4_h_clk is used by RPM and is if disabled cause the RPM to reject any regulator change command. These clock should never be disabled.
--- drivers/clk/qcom/gcc-ipq806x.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)
drivers/clk/qcom/gcc-ipq806x.c +5 -4
@@ -798,7 +798,7 @@ static struct clk_rcg gsbi4_qup_src = { .parent_data = gcc_pxo_pll8, .num_parents = ARRAY_SIZE(gcc_pxo_pll8), .ops = &clk_rcg_ops, - .flags = CLK_SET_PARENT_GATE, + .flags = CLK_SET_PARENT_GATE | CLK_IGNORE_UNUSED, }, }, };
@@ -816,7 +816,7 @@ static struct clk_branch gsbi4_qup_clk = { }, .num_parents = 1, .ops = &clk_branch_ops, - .flags = CLK_SET_RATE_PARENT, + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, }, }, };
@@ -900,7 +900,7 @@ static struct clk_rcg gsbi6_qup_src = { .parent_data = gcc_pxo_pll8, .num_parents = ARRAY_SIZE(gcc_pxo_pll8), .ops = &clk_rcg_ops, - .flags = CLK_SET_PARENT_GATE, + .flags = CLK_SET_PARENT_GATE | CLK_IGNORE_UNUSED, }, }, };
@@ -969,7 +969,7 @@ static struct clk_branch gsbi7_qup_clk = { }, .num_parents = 1, .ops = &clk_branch_ops, - .flags = CLK_SET_RATE_PARENT, + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, }, }, };
@@ -1015,6 +1015,7 @@ static struct clk_branch gsbi4_h_clk = { .hw.init = &(struct clk_init_data){ .name ="gsbi4_h_clk" , .ops = &clk_branch_ops, + .flags =CLK_IGNORE_UNUSED , }, }, };
Signature · 1 line
2.33.1
PATCH v3 10/15 drivers: clk: qcom: gcc-ipq806x: add additional freq for sdc table
In reply to Ansuel SmithAdd additional freq supported for the sdc table.
--- drivers/clk/qcom/gcc-ipq806x.c | 1 + 1 file changed, 1 insertion(+)
drivers/clk/qcom/gcc-ipq806x.c +1 -0
@@ -1292,6 +1292,7 @@ static const struct freq_tbl clk_tbl_sdc[] = { { 20210000, P_PLL8, 1, 1, 19 }, { 24000000, P_PLL8, 4, 1, 4 }, { 48000000, P_PLL8, 4, 1, 2 }, + { 52000000, P_PLL8, 1, 2, 15 }, /* 51.2 Mhz */ { 64000000, P_PLL8, 3, 1, 2 }, { 96000000, P_PLL8, 4, 0, 0 }, { 192000000, P_PLL8, 2, 0, 0 },
Signature · 1 line
2.33.1
Stephen Boyd
maintainerRe: [PATCH v3 10/15] drivers: clk: qcom: gcc-ipq806x: add additional freq for sdc table
Quoting Ansuel Smith (2022-01-21 13:03:35)
Quoted 12 lines
Add additional freq supported for the sdc table.
Signed-off-by Ansuel Smith <[email protected]>--- drivers/clk/qcom/gcc-ipq806x.c | 1 + 1 file changed, 1 insertion(+)drivers/clk/qcom/gcc-ipq806x.c +0
-0
drivers/clk/qcom/gcc-ipq806x.c static const struct freq_tbl clk_tbl_sdc[] = { · line 1295
Quoted 4 lines
drivers/clk/qcom/gcc-ipq806x.c +1
-0@@ -1292,6 +1292,7 @@ static const struct freq_tbl clk_tbl_sdc[] = { { 20210000, P_PLL8, 1, 1, 19 }, { 24000000, P_PLL8, 4, 1, 4 }, { 48000000, P_PLL8, 4, 1, 2 }, + { 52000000, P_PLL8, 1, 2, 15 }, /* 51.2 Mhz */
Why the comment and fake rate? Can it be 51200000 instead and drop the comment?
Re: [PATCH v3 10/15] drivers: clk: qcom: gcc-ipq806x: add additional freq for sdc table
Quoted 8 lines · Stephen Boyd
Quoting Ansuel Smith (2022-01-21 13:03:35)
Quoted 7 lines
Add additional freq supported for the sdc table.
Signed-off-by Ansuel Smith <[email protected]>--- drivers/clk/qcom/gcc-ipq806x.c | 1 + 1 file changed, 1 insertion(+)
Quoted 12 lines
drivers/clk/qcom/gcc-ipq806x.c static const struct freq_tbl clk_tbl_sdc[] = { · line 1295
Quoted 9 lines
drivers/clk/qcom/gcc-ipq806x.c +1
-0@@ -1292,6 +1292,7 @@ static const struct freq_tbl clk_tbl_sdc[] = { { 20210000, P_PLL8, 1, 1, 19 }, { 24000000, P_PLL8, 4, 1, 4 }, { 48000000, P_PLL8, 4, 1, 2 }, + { 52000000, P_PLL8, 1, 2, 15 }, /* 51.2 Mhz */Why the comment and fake rate? Can it be 51200000 instead and drop the comment?
I will add the related reason in the commit.
We cannot achieve exact 52Mhz(jitter free) clock using PLL8. As per the MND calculator the closest possible jitter free clock using PLL8 is 51.2Mhz. This patch adds the values, which will provide jitter free 51.2Mhz when the requested frequency is 52mhz.
Signature · 1 line
Ansuel
Stephen Boyd
maintainerRe: [PATCH v3 10/15] drivers: clk: qcom: gcc-ipq806x: add additional freq for sdc table
Quoting Ansuel Smith (2022-01-25 13:03:52)
Quoted 22 lines · Stephen Boyd
Quoted 8 lines
Quoting Ansuel Smith (2022-01-21 13:03:35)
Quoted 7 lines
Add additional freq supported for the sdc table.
Signed-off-by Ansuel Smith <[email protected]>--- drivers/clk/qcom/gcc-ipq806x.c | 1 + 1 file changed, 1 insertion(+)Quoted 12 lines
drivers/clk/qcom/gcc-ipq806x.c static const struct freq_tbl clk_tbl_sdc[] = { · line 1295
Quoted 9 lines
drivers/clk/qcom/gcc-ipq806x.c +1
-0@@ -1292,6 +1292,7 @@ static const struct freq_tbl clk_tbl_sdc[] = { { 20210000, P_PLL8, 1, 1, 19 }, { 24000000, P_PLL8, 4, 1, 4 }, { 48000000, P_PLL8, 4, 1, 2 }, + { 52000000, P_PLL8, 1, 2, 15 }, /* 51.2 Mhz */Why the comment and fake rate? Can it be 51200000 instead and drop the comment?
Quoted 6 lines
I will add the related reason in the commit.
We cannot achieve exact 52Mhz(jitter free) clock using PLL8. As per the MND calculator the closest possible jitter free clock using PLL8 is 51.2Mhz. This patch adds the values, which will provide jitter free 51.2Mhz when the requested frequency is 52mhz.
Sounds like this clk should use the round down clk_ops instead of the round up ones. Then the actual frequency can be in the table.
Re: [PATCH v3 10/15] drivers: clk: qcom: gcc-ipq806x: add additional freq for sdc table
Quoted 25 lines · Stephen Boyd
Quoting Ansuel Smith (2022-01-25 13:03:52)
Quoted 24 lines · Stephen Boyd
Quoted 8 lines
Quoting Ansuel Smith (2022-01-21 13:03:35)
Quoted 7 lines
Add additional freq supported for the sdc table.
Signed-off-by Ansuel Smith <[email protected]>--- drivers/clk/qcom/gcc-ipq806x.c | 1 + 1 file changed, 1 insertion(+)Quoted 12 lines
drivers/clk/qcom/gcc-ipq806x.c static const struct freq_tbl clk_tbl_sdc[] = { · line 1295
Quoted 9 lines
drivers/clk/qcom/gcc-ipq806x.c +1
-0@@ -1292,6 +1292,7 @@ static const struct freq_tbl clk_tbl_sdc[] = { { 20210000, P_PLL8, 1, 1, 19 }, { 24000000, P_PLL8, 4, 1, 4 }, { 48000000, P_PLL8, 4, 1, 2 }, + { 52000000, P_PLL8, 1, 2, 15 }, /* 51.2 Mhz */Why the comment and fake rate? Can it be 51200000 instead and drop the comment?
I will add the related reason in the commit.
Quoted 7 lines
Quoted 4 lines
We cannot achieve exact 52Mhz(jitter free) clock using PLL8. As per the MND calculator the closest possible jitter free clock using PLL8 is 51.2Mhz. This patch adds the values, which will provide jitter free 51.2Mhz when the requested frequency is 52mhz.
Sounds like this clk should use the round down
clk_opsinstead of the round up ones. Then the actual frequency can be in the table.
Some hint on how to do that? This use the rcg generic ops that doesn't use any round. Should I crate some special ops in the rcg driver to implement the round ops?
Signature · 1 line
Ansuel
Stephen Boyd
maintainerRe: [PATCH v3 10/15] drivers: clk: qcom: gcc-ipq806x: add additional freq for sdc table
Quoting Ansuel Smith (2022-02-01 14:01:40)
Quoted 31 lines · Stephen Boyd
Quoted 30 lines
Quoting Ansuel Smith (2022-01-25 13:03:52)
Quoted 28 lines · Stephen Boyd
Quoted 8 lines
Quoting Ansuel Smith (2022-01-21 13:03:35)
Quoted 7 lines
Add additional freq supported for the sdc table.
Signed-off-by Ansuel Smith <[email protected]>--- drivers/clk/qcom/gcc-ipq806x.c | 1 + 1 file changed, 1 insertion(+)Quoted 12 lines
drivers/clk/qcom/gcc-ipq806x.c static const struct freq_tbl clk_tbl_sdc[] = { · line 1295
Quoted 9 lines
drivers/clk/qcom/gcc-ipq806x.c +1
-0@@ -1292,6 +1292,7 @@ static const struct freq_tbl clk_tbl_sdc[] = { { 20210000, P_PLL8, 1, 1, 19 }, { 24000000, P_PLL8, 4, 1, 4 }, { 48000000, P_PLL8, 4, 1, 2 }, + { 52000000, P_PLL8, 1, 2, 15 }, /* 51.2 Mhz */Why the comment and fake rate? Can it be 51200000 instead and drop the comment?
I will add the related reason in the commit.
We cannot achieve exact 52Mhz(jitter free) clock using PLL8. As per the MND calculator the closest possible jitter free clock using PLL8 is 51.2Mhz. This patch adds the values, which will provide jitter free 51.2Mhz when the requested frequency is 52mhz.
Quoted 7 lines
Quoted 2 lines
Sounds like this clk should use the round down
clk_opsinstead of the round up ones. Then the actual frequency can be in the table.Some hint on how to do that? This use the rcg generic ops that doesn't use any round. Should I crate some special ops in the rcg driver to implement the round ops?
Use the clk_rcg2_floor_ops, or if this isn't an rcg2 clk, then make a duplicate clk_rcg_floor_ops that does the same thing.
PATCH v3 11/15 dt-bindings: clock: add ipq8064 ce5 clk define
In reply to Ansuel SmithAdd ipq8064 ce5 clk define needed for CryptoEngine in gcc driver.
--- include/dt-bindings/clock/qcom,gcc-ipq806x.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
include/dt-bindings/clock/qcom,gcc-ipq806x.h +4 -1
@@ -240,7 +240,7 @@#define PLL14 232#define PLL14_VOTE 233#define PLL18 234 -#define CE5_SRC 235 +#define CE5_A_CLK 235#define CE5_H_CLK 236#define CE5_CORE_CLK 237#define CE3_SLEEP_CLK 238
@@ -283,5 +283,8 @@#define EBI2_AON_CLK 281#define NSSTCM_CLK_SRC 282#define NSSTCM_CLK 283 +#define CE5_A_CLK_SRC 285 +#define CE5_H_CLK_SRC 286 +#define CE5_CORE_CLK_SRC 287#endif
Signature · 1 line
2.33.1
Stephen Boyd
maintainerRe: [PATCH v3 11/15] dt-bindings: clock: add ipq8064 ce5 clk define
Quoting Ansuel Smith (2022-01-21 13:03:36)
Quoted 12 lines
Add ipq8064 ce5 clk define needed for CryptoEngine in gcc driver.
Signed-off-by Ansuel Smith <[email protected]>--- include/dt-bindings/clock/qcom,gcc-ipq806x.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)include/dt-bindings/clock/qcom,gcc-ipq806x.h +0
-0
include/dt-bindings/clock/qcom,gcc-ipq806x.h line 243
Quoted 5 lines
include/dt-bindings/clock/qcom,gcc-ipq806x.h +1
-1@@ -240,7 +240,7 @@#define PLL14 232#define PLL14_VOTE 233#define PLL18 234 -#define CE5_SRC 235 +#define CE5_A_CLK 235
Technically this is ABI and changing it is bad. I see that CE5_SRC isn't used though so I guess it's OK.
Quoted 10 lines
include/dt-bindings/clock/qcom,gcc-ipq806x.h +3
-0#define CE5_H_CLK 236#define CE5_CORE_CLK 237#define CE3_SLEEP_CLK 238@@ -283,5 +283,8 @@#define EBI2_AON_CLK 281#define NSSTCM_CLK_SRC 282#define NSSTCM_CLK 283 +#define CE5_A_CLK_SRC 285 +#define CE5_H_CLK_SRC 286 +#define CE5_CORE_CLK_SRC 287
Re: [PATCH v3 11/15] dt-bindings: clock: add ipq8064 ce5 clk define
Quoted 8 lines · Stephen Boyd
Quoting Ansuel Smith (2022-01-21 13:03:36)
Quoted 7 lines
Add ipq8064 ce5 clk define needed for CryptoEngine in gcc driver.
Signed-off-by Ansuel Smith <[email protected]>--- include/dt-bindings/clock/qcom,gcc-ipq806x.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
Quoted 14 lines
include/dt-bindings/clock/qcom,gcc-ipq806x.h line 243
Quoted 10 lines
include/dt-bindings/clock/qcom,gcc-ipq806x.h +1
-1@@ -240,7 +240,7 @@#define PLL14 232#define PLL14_VOTE 233#define PLL18 234 -#define CE5_SRC 235 +#define CE5_A_CLK 235Technically this is ABI and changing it is bad. I see that
CE5_SRCisn't used though so I guess it's OK.
Consider that this naming comes directly from qsdk so I really don't know why it was called SRC from the start.
Quoted 10 lines
Quoted 10 lines
include/dt-bindings/clock/qcom,gcc-ipq806x.h +3
-0#define CE5_H_CLK 236#define CE5_CORE_CLK 237#define CE3_SLEEP_CLK 238@@ -283,5 +283,8 @@#define EBI2_AON_CLK 281#define NSSTCM_CLK_SRC 282#define NSSTCM_CLK 283 +#define CE5_A_CLK_SRC 285 +#define CE5_H_CLK_SRC 286 +#define CE5_CORE_CLK_SRC 287
Signature · 1 line
Ansuel
PATCH v3 12/15 drivers: clk: qcom: gcc-ipq806x: add CryptoEngine clocks
In reply to Ansuel SmithAdd missing CryptoEngine clocks and pll11 required clock.
--- drivers/clk/qcom/gcc-ipq806x.c | 244 +++++++++++++++++++++++++++++++++ 1 file changed, 244 insertions(+)
drivers/clk/qcom/gcc-ipq806x.c +244 -0
@@ -256,6 +256,24 @@ static struct clk_pll pll18 = { }, }; +static struct clk_pll pll11 = { + .l_reg =0x3184 , + .m_reg =0x3188 , + .n_reg =0x318c , + .config_reg =0x3194 , + .mode_reg =0x3180 , + .status_reg =0x3198 , + .status_bit =16 , + .clkr.hw.init = &(struct clk_init_data ){ + .name ="pll11" , + .parent_data = &(const struct clk_parent_data ){ + .fw_name ="pxo" , + }, + .num_parents =1 , + .ops = &clk_pll_ops, + }, +}; +enum {P_PXO ,P_PLL8 ,
@@ -264,6 +282,7 @@ enum {P_CXO ,P_PLL14 ,P_PLL18 , + P_PLL11, }; static const struct parent_map gcc_pxo_pll8_map[] = {
@@ -331,6 +350,44 @@ static const struct clk_parent_data gcc_pxo_pll8_pll14_pll18_pll0[] = { { .hw = &pll18.clkr.hw }, }; +static const struct parent_map gcc_pxo_pll8_pll0_pll14_pll18_pll11_map[] = { + {P_PXO ,0 }, + {P_PLL8 ,4 }, + {P_PLL0 ,2 }, + {P_PLL14 ,5 }, + {P_PLL18 ,1 }, + {P_PLL11 ,3 }, +}; + +static const struct clk_parent_data gcc_pxo_pll8_pll0_pll14_pll18_pll11[] = { + { .fw_name ="pxo" }, + { .hw = &pll8_vote.hw }, + { .hw = &pll0_vote.hw }, + { .hw = &pll14.clkr.hw }, + { .hw = &pll18.clkr.hw }, + { .hw = &pll11.clkr.hw }, + +}; + +static const struct parent_map gcc_pxo_pll3_pll0_pll14_pll18_pll11_map[] = { + {P_PXO ,0 }, + {P_PLL3 ,6 }, + {P_PLL0 ,2 }, + {P_PLL14 ,5 }, + {P_PLL18 ,1 }, + {P_PLL11 ,3 }, +}; + +static const struct clk_parent_data gcc_pxo_pll3_pll0_pll14_pll18_pll11[] = { + { .fw_name ="pxo" }, + { .hw = &pll3.clkr.hw }, + { .hw = &pll0_vote.hw }, + { .hw = &pll14.clkr.hw }, + { .hw = &pll18.clkr.hw }, + { .hw = &pll11.clkr.hw }, + +}; +static struct freq_tbl clk_tbl_gsbi_uart[] = { {1843200 ,P_PLL8 ,2 ,6 ,625 }, {3686400 ,P_PLL8 ,2 ,12 ,625 },
@@ -2818,6 +2875,186 @@ static struct clk_dyn_rcg ubi32_core2_src_clk = { }, }; +static const struct freq_tbl clk_tbl_ce5_core[] = { + {150000000 ,P_PLL3 ,8 ,1 ,1 }, + {213200000 ,P_PLL11 ,5 ,1 ,1 }, + { } +}; + +static struct clk_dyn_rcg ce5_core_src = { + .ns_reg[0 ] =0x36C4 , + .ns_reg[1 ] =0x36C8 , + .bank_reg =0x36C0 , + .s[0 ] = { + .src_sel_shift =0 , + .parent_map = gcc_pxo_pll3_pll0_pll14_pll18_pll11_map, + }, + .s[1 ] = { + .src_sel_shift =0 , + .parent_map = gcc_pxo_pll3_pll0_pll14_pll18_pll11_map, + }, + .p[0 ] = { + .pre_div_shift =3 , + .pre_div_width =4 , + }, + .p[1 ] = { + .pre_div_shift =3 , + .pre_div_width =4 , + }, + .mux_sel_bit =0 , + .freq_tbl = clk_tbl_ce5_core, + .clkr = { + .enable_reg =0x36C0 , + .enable_mask =BIT (1 ), + .hw.init = &(struct clk_init_data ){ + .name ="ce5_core_src" , + .parent_data = gcc_pxo_pll3_pll0_pll14_pll18_pll11, + .num_parents =ARRAY_SIZE (gcc_pxo_pll3_pll0_pll14_pll18_pll11), + .ops = &clk_dyn_rcg_ops, + }, + }, +}; + +static struct clk_branch ce5_core_clk = { + .halt_reg =0x2FDC , + .halt_bit =5 , + .hwcg_reg =0x36CC , + .hwcg_bit =6 , + .clkr = { + .enable_reg =0x36CC , + .enable_mask =BIT (4 ), + .hw.init = &(struct clk_init_data ){ + .name ="ce5_core_clk" , + .parent_hws = (const struct clk_hw *[]){ + &ce5_core_src.clkr.hw, + }, + .num_parents =1 , + .ops = &clk_branch_ops, + .flags =CLK_SET_RATE_PARENT , + }, + }, +}; + +static const struct freq_tbl clk_tbl_ce5_a_clk[] = { + {160000000 ,P_PLL0 ,5 ,1 ,1 }, + {213200000 ,P_PLL11 ,5 ,1 ,1 }, + { } +}; + +static struct clk_dyn_rcg ce5_a_clk_src = { + .ns_reg[0 ] =0x3d84 , + .ns_reg[1 ] =0x3d88 , + .bank_reg =0x3d80 , + .s[0 ] = { + .src_sel_shift =0 , + .parent_map = gcc_pxo_pll8_pll0_pll14_pll18_pll11_map, + }, + .s[1 ] = { + .src_sel_shift =0 , + .parent_map = gcc_pxo_pll8_pll0_pll14_pll18_pll11_map, + }, + .p[0 ] = { + .pre_div_shift =3 , + .pre_div_width =4 , + }, + .p[1 ] = { + .pre_div_shift =3 , + .pre_div_width =4 , + }, + .mux_sel_bit =0 , + .freq_tbl = clk_tbl_ce5_a_clk, + .clkr = { + .enable_reg =0x3d80 , + .enable_mask =BIT (1 ), + .hw.init = &(struct clk_init_data ){ + .name ="ce5_a_clk_src" , + .parent_data = gcc_pxo_pll8_pll0_pll14_pll18_pll11, + .num_parents =ARRAY_SIZE (gcc_pxo_pll8_pll0_pll14_pll18_pll11), + .ops = &clk_dyn_rcg_ops, + }, + }, +}; + +static struct clk_branch ce5_a_clk = { + .halt_reg =0x3c20 , + .halt_bit =12 , + .hwcg_reg =0x3d8c , + .hwcg_bit =6 , + .clkr = { + .enable_reg =0x3d8c , + .enable_mask =BIT (4 ), + .hw.init = &(struct clk_init_data ){ + .name ="ce5_a_clk" , + .parent_hws = (const struct clk_hw *[]){ + &ce5_a_clk_src.clkr.hw, + }, + .num_parents =1 , + .ops = &clk_branch_ops, + .flags =CLK_SET_RATE_PARENT , + }, + }, +}; + +static const struct freq_tbl clk_tbl_ce5_h_clk[] = { + {160000000 ,P_PLL0 ,5 ,1 ,1 }, + {213200000 ,P_PLL11 ,5 ,1 ,1 }, + { } +}; + +static struct clk_dyn_rcg ce5_h_clk_src = { + .ns_reg[0 ] =0x3c64 , + .ns_reg[1 ] =0x3c68 , + .bank_reg =0x3c60 , + .s[0 ] = { + .src_sel_shift =0 , + .parent_map = gcc_pxo_pll8_pll0_pll14_pll18_pll11_map, + }, + .s[1 ] = { + .src_sel_shift =0 , + .parent_map = gcc_pxo_pll8_pll0_pll14_pll18_pll11_map, + }, + .p[0 ] = { + .pre_div_shift =3 , + .pre_div_width =4 , + }, + .p[1 ] = { + .pre_div_shift =3 , + .pre_div_width =4 , + }, + .mux_sel_bit =0 , + .freq_tbl = clk_tbl_ce5_h_clk, + .clkr = { + .enable_reg =0x3c60 , + .enable_mask =BIT (1 ), + .hw.init = &(struct clk_init_data ){ + .name ="ce5_h_clk_src" , + .parent_data = gcc_pxo_pll8_pll0_pll14_pll18_pll11, + .num_parents =ARRAY_SIZE (gcc_pxo_pll8_pll0_pll14_pll18_pll11), + .ops = &clk_dyn_rcg_ops, + }, + }, +}; + +static struct clk_branch ce5_h_clk = { + .halt_reg =0x3c20 , + .halt_bit =11 , + .hwcg_reg =0x3c6c , + .hwcg_bit =6 , + .clkr = { + .enable_reg =0x3c6c , + .enable_mask =BIT (4 ), + .hw.init = &(struct clk_init_data ){ + .name ="ce5_h_clk" , + .parent_hws = (const struct clk_hw *[]){ + &ce5_h_clk_src.clkr.hw, + }, + .num_parents =1 , + .ops = &clk_branch_ops, + .flags =CLK_SET_RATE_PARENT , + }, + }, +}; +static struct clk_regmap *gcc_ipq806x_clks[] = { [PLL0 ] = &pll0.clkr, [PLL0_VOTE ] = &pll0_vote,
@@ -2825,6 +3062,7 @@ static struct clk_regmap *gcc_ipq806x_clks[] = { [PLL4_VOTE] = &pll4_vote, [PLL8] = &pll8.clkr, [PLL8_VOTE] = &pll8_vote, + [PLL11] = &pll11.clkr, [PLL14] = &pll14.clkr, [PLL14_VOTE] = &pll14_vote, [PLL18] = &pll18.clkr,
@@ -2939,6 +3177,12 @@ static struct clk_regmap *gcc_ipq806x_clks[] = { [PLL9] = &hfpll0.clkr, [PLL10] = &hfpll1.clkr, [PLL12] = &hfpll_l2.clkr, + [CE5_A_CLK_SRC] = &ce5_a_clk_src.clkr, + [CE5_A_CLK] = &ce5_a_clk.clkr, + [CE5_H_CLK_SRC] = &ce5_h_clk_src.clkr, + [CE5_H_CLK] = &ce5_h_clk.clkr, + [CE5_CORE_CLK_SRC] = &ce5_core_src.clkr, + [CE5_CORE_CLK] = &ce5_core_clk.clkr, };static const struct qcom_reset_map gcc_ipq806x_resets[] = {
Signature · 1 line
2.33.1
PATCH v3 13/15 dt-bindings: reset: add ipq8064 ce5 resets
In reply to Ansuel SmithAdd ipq8064 ce5 resets needed for CryptoEngine gcc driver.
--- include/dt-bindings/reset/qcom,gcc-ipq806x.h | 5 +++++ 1 file changed, 5 insertions(+)
include/dt-bindings/reset/qcom,gcc-ipq806x.h +5 -0
@@ -163,5 +163,10 @@#define NSS_CAL_PRBS_RST_N_RESET 154#define NSS_LCKDT_RST_N_RESET 155#define NSS_SRDS_N_RESET 156 +#define CRYPTO_ENG1_RESET 157 +#define CRYPTO_ENG2_RESET 158 +#define CRYPTO_ENG3_RESET 159 +#define CRYPTO_ENG4_RESET 160 +#define CRYPTO_AHB_RESET 161#endif
Signature · 1 line
2.33.1
PATCH v3 14/15 drivers: clk: qcom: gcc-ipq806x: add CryptoEngine resets
In reply to Ansuel SmithAdd missing CryptoEngine resets.
--- drivers/clk/qcom/gcc-ipq806x.c | 5 +++++ 1 file changed, 5 insertions(+)
drivers/clk/qcom/gcc-ipq806x.c +5 -0
@@ -3314,6 +3314,11 @@ static const struct qcom_reset_map gcc_ipq806x_resets[] = { [GMAC_CORE3_RESET] = { 0x3cfc, 0 }, [GMAC_CORE4_RESET] = { 0x3d1c, 0 }, [GMAC_AHB_RESET] = { 0x3e24, 0 }, + [CRYPTO_ENG1_RESET] = { 0x3e00, 0}, + [CRYPTO_ENG2_RESET] = { 0x3e04, 0}, + [CRYPTO_ENG3_RESET] = { 0x3e08, 0}, + [CRYPTO_ENG4_RESET] = { 0x3e0c, 0}, + [CRYPTO_AHB_RESET] = { 0x3e10, 0}, [NSS_CH0_RST_RX_CLK_N_RESET] = { 0x3b60, 0 }, [NSS_CH0_RST_TX_CLK_N_RESET] = { 0x3b60, 1 }, [NSS_CH0_RST_RX_125M_N_RESET] = { 0x3b60, 2 },
Signature · 1 line
2.33.1
PATCH v3 15/15 ARM: dts: qcom: Add syscon and cxo/pxo clock to gcc node for ipq8064
In reply to Ansuel SmithAdd syscon compatible required for tsens driver to correctly probe driver and access the reg. Also add cxo and pxo tag and declare them as gcc clock now requires them for the ipq8064 gcc driver that has now been modernized.
--- arch/arm/boot/dts/qcom-ipq8064.dtsi | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)
arch/arm/boot/dts/qcom-ipq8064.dtsi +5 -3
@@ -298,13 +298,13 @@ smem: smem@41000000 { }; clocks { - cxo_board { + cxo_board: cxo_board { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <25000000>; }; - pxo_board { + pxo_board: pxo_board { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <25000000>;
@@ -736,7 +736,9 @@ tsens_calib_backup: calib_backup@410 { }; gcc: clock-controller@900000 { - compatible = "qcom,gcc-ipq8064"; + compatible = "qcom,gcc-ipq8064", "syscon"; + clocks = <&pxo_board>, <&cxo_board>; + clock-names = "pxo", "cxo"; reg = <0x00900000 0x4000>; #clock-cells = <1>; #reset-cells = <1>;
Signature · 1 line
2.33.1