Fix NULL pointer dereference in page_pool
Subsystems (4)
cover Fix NULL pointer dereference in page_pool
I'm not sure if there's something wrong with my config, but as soon as I run "ip link set eth0 up" I would get a crash that would invoke a seemingly endless memory dump.
git bisect led me to the page_pool, where there isn't the existence of page_pool_params inside of the pool. Therefore the check of if (pool->p.init_callback) would cause a crash.
I have some out-of-tree patches currently, so I'm not sure if my case is valid. Specifically the MTU of cpsw_new has been updated to 1520 to account for my setup (beaglebone with eth0 as the CPU port of a DSA). I'm also not familiar with much of net/core.
If it is valid that page_pool might not have page_pool_params in a DSA scenario, then hopefully this patch is sufficient. If it isn't valid and something I'm doing is invoking a memory issue - then I've got my work cut out for me :-)
Colin Foster (1):
page_pool: fix NULL dereference crash
net/core/page_pool.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Signature · 1 line
2.25.1
RFC 1/1 page_pool: fix NULL dereference crash
Check for the existence of page pool params before dereferencing. This can cause crashes in certain conditions.
allocated")
--- net/core/page_pool.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
net/core/page_pool.c +1 -1
@@ -213,7 +213,7 @@ static void page_pool_set_pp_info(struct page_pool *pool, { page->pp = pool; page->pp_magic |=PP_SIGNATURE ; -if (pool->p.init_callback) +if (pool->p && pool->p.init_callback) pool->p.init_callback (page, pool->p.init_arg); }
Signature · 1 line
2.25.1
Re: [net RFC v1 1/1] page_pool: fix NULL dereference crash
Quoted 3 lines · Colin Foster
Check for the existence of page pool params before dereferencing. This can cause crashes in certain conditions.
In what conditions?
Out of tree driver?
Quoted 24 lines
Fixes 35b2e549894b ("page_pool: Add callback to init pages when they areallocated")
Signed-off-by Colin Foster <[email protected]>--- net/core/page_pool.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)net/core/page_pool.c +1
-2@@ -213,7 +213,7 @@ static void page_pool_set_pp_info(struct page_pool *pool, { page->pp = pool; page->pp_magic |=PP_SIGNATURE ; -if (pool->p.init_callback) +if (pool->p && pool->p.init_callback) pool->p.init_callback (page, pool->p.init_arg); } --2.25.1
Re: [net RFC v1 1/1] page_pool: fix NULL dereference crash
Quoted 8 lines · Alexei Starovoitov
Quoted 3 lines · Colin Foster
Check for the existence of page pool params before dereferencing. This can cause crashes in certain conditions.
In what conditions?
Out of tree driver?
Hi Alexei,
Thanks for the quick response.
I'm actively working on a DSA driver that is currently out-of-tree, but trying to get it into mainline. But I'm not convinced that's the problem...
I'm using a beagelebone black with the cpsw_new driver. There are two tweaks to that driver: the default vlan port is 10 and 11 so there's no conflict between cpsw_new and DSA, and the ndev->max_mtu / rx_packet_max have been increased to 1600 to allow for DSA frames larger than the standard MTU of 1500.
My focus is on the DSA driver, but the crash happens as soon as I run "ip link set eth0 up" which is invoking the cpsw_new driver. Therefore I suspect that the issue is not directly related to the DSA section (ocelot / felix, much of which uses code that is mainline)
As I suggested, I haven't dug into what is going on around the page_pool yet. If there is something that is pre-loading memory at 1500 byte intervals and I broke that, that's entirely on me.
[ removes 1600 byte MTU patch and pool patch ]
I can confirm it still crashes when I don't modify the MTU in the cpsw_new driver... so that doesn't seem to be it. That crash log is below.
# ip link set eth0 up [ 18.074704] cpsw-switch 4a100000.switch: starting ndev. mode: dual_mac [ 18.174286] SMSC LAN8710/LAN8720 4a101000.mdio:00: attached PHY driver (mii_bus:phy_addr=4a101000.mdio:00, irq=POLL) [ 18.185458] 8<--- cut here --- [ 18.188554] Unable to handle kernel paging request at virtual address c3104440 [ 18.195819] [c3104440] *pgd=8300041e(bad) [ 18.199885] Internal error: Oops: 8000000d [#1] SMP ARM [ 18.205148] Modules linked in: [ 18.208233] CPU: 0 PID: 168 Comm: ip Not tainted 5.16.0-05302-g8bd405e6e8a0-dirty #265 [ 18.216201] Hardware name: Generic AM33XX (Flattened Device Tree) [ 18.222328] PC is at 0xc3104440 [ 18.225500] LR is at __page_pool_alloc_pages_slow+0xbc/0x2e0 [ 18.231222] pc : [<c3104440>] lr : [<c0ee06c8>] psr: a00b0013 [ 18.237523] sp : c3104440 ip : 00000020 fp : c219e580 [ 18.242778] r10: c1a04d54 r9 : 00000000 r8 : 00000000 [ 18.248032] r7 : c36b9000 r6 : 00000000 r5 : c36b9084 r4 : 00000000 [ 18.254595] r3 : c07a399c r2 : 00000000 r1 : c325784c r0 : dfa48bc0 [ 18.261162] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 18.268343] Control: 10c5387d Table: 836f0019 DAC: 00000051 [ 18.274119] Register r0 information: non-slab/vmalloc memory [ 18.279825] Register r1 information: non-slab/vmalloc memory [ 18.285523] Register r2 information: NULL pointer [ 18.290260] Register r3 information: non-slab/vmalloc memory [ 18.295957] Register r4 information: NULL pointer [ 18.300693] Register r5 information: slab kmalloc-1k start c36b9000 pointer offset 132 size 1024 [ 18.309569] Register r6 information: NULL pointer [ 18.314306] Register r7 information: slab kmalloc-1k start c36b9000 pointer offset 0 size 1024 [ 18.322999] Register r8 information: NULL pointer [ 18.327736] Register r9 information: NULL pointer [ 18.332473] Register r10 information: non-slab/vmalloc memory [ 18.338257] Register r11 information: slab kmalloc-4k start c219e000 pointer offset 1408 size 4096 [ 18.347301] Register r12 information: non-paged memory [ 18.352475] Process ip (pid: 168, stack limit = 0x7eb0d4ab) [ 18.358089] Stack: (0xc3104440 to 0xc3258000) (too big a stack to show)
I can confirm that it crashes on net-next/master as well:
commit fe8152b38d3a, using the same DTB that defines the cpsw_new port as the DSA master. Relevant DTS snippet from my in-development driver:
+&spi0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ ocelot-chip@0 {
+ compatible = "mscc,vsc7512_mfd_spi";
+ spi-max-frequency = <2500000>;
+ reg = <0>;+
+ ethernet-switch@0 {
+ compatible = "mscc,vsc7512-ext-switch";
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>; + label = "cpu"; + status = "okay"; + ethernet = <&mac_sw>; + phy-handle = <&sw_phy0>; + phy-mode = "internal";
+ };
I was hoping for an "oh, if a switch is set up in DSA the page_pool gets set up this way" type scenario. I fully understand that might not be the case, and the issue could be in something I'm doing incorrectly - it certainly wouldn't be the first time.
If this patch doesn't make sense I can look deeper. As mentioned, I'm working to get this accepted upstream, so I'll have to figure it out one way or another.
Quoted 25 lines
Quoted 25 lines
Fixes 35b2e549894b ("page_pool: Add callback to init pages when they areallocated")
Signed-off-by Colin Foster <[email protected]>--- net/core/page_pool.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)net/core/page_pool.c +1
-2@@ -213,7 +213,7 @@ static void page_pool_set_pp_info(struct page_pool *pool, { page->pp = pool; page->pp_magic |=PP_SIGNATURE ; -if (pool->p.init_callback) +if (pool->p && pool->p.init_callback) pool->p.init_callback (page, pool->p.init_arg); } --2.25.1
Re: [net RFC v1 1/1] page_pool: fix NULL dereference crash
Quoted 108 lines · Colin Foster
Quoted 8 lines · Alexei Starovoitov
Quoted 3 lines · Colin Foster
Check for the existence of page pool params before dereferencing. This can cause crashes in certain conditions.
In what conditions?
Out of tree driver?Hi Alexei,
Thanks for the quick response.
I'm actively working on a DSA driver that is currently out-of-tree, but trying to get it into mainline. But I'm not convinced that's the problem...
I'm using a beagelebone black with the
cpsw_newdriver. There are two tweaks to that driver: the default vlan port is 10 and 11 so there's no conflict betweencpsw_newand DSA, and thendev->max_mtu/rx_packet_maxhave been increased to 1600 to allow for DSA frames larger than the standard MTU of 1500.My focus is on the DSA driver, but the crash happens as soon as I run "ip link set eth0 up" which is invoking the
cpsw_newdriver. Therefore I suspect that the issue is not directly related to the DSA section (ocelot / felix, much of which uses code that is mainline)As I suggested, I haven't dug into what is going on around the
page_poolyet. If there is something that is pre-loading memory at 1500 byte intervals and I broke that, that's entirely on me.[ removes 1600 byte MTU patch and pool patch ]
I can confirm it still crashes when I don't modify the MTU in the
cpsw_newdriver... so that doesn't seem to be it. That crash log is below.# ip link set eth0 up [ 18.074704] cpsw-switch 4a100000.switch: starting ndev. mode: dual_mac [ 18.174286] SMSC LAN8710/LAN8720 4a101000.mdio:00: attached PHY driver (mii_bus:phy_addr=4a101000.mdio:00, irq=POLL) [ 18.185458] 8<--- cut here --- [ 18.188554] Unable to handle kernel paging request at virtual address c3104440 [ 18.195819] [c3104440] *pgd=8300041e(bad) [ 18.199885] Internal error: Oops: 8000000d [#1] SMP ARM [ 18.205148] Modules linked in: [ 18.208233] CPU: 0 PID: 168 Comm: ip Not tainted 5.16.0-05302-g8bd405e6e8a0-dirty #265 [ 18.216201] Hardware name: Generic AM33XX (Flattened Device Tree) [ 18.222328] PC is at 0xc3104440 [ 18.225500] LR is at __page_pool_alloc_pages_slow+0xbc/0x2e0 [ 18.231222] pc : [<c3104440>] lr : [<c0ee06c8>] psr: a00b0013 [ 18.237523] sp : c3104440 ip : 00000020 fp : c219e580 [ 18.242778] r10: c1a04d54 r9 : 00000000 r8 : 00000000 [ 18.248032] r7 : c36b9000 r6 : 00000000 r5 : c36b9084 r4 : 00000000 [ 18.254595] r3 : c07a399c r2 : 00000000 r1 : c325784c r0 : dfa48bc0 [ 18.261162] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 18.268343] Control: 10c5387d Table: 836f0019 DAC: 00000051 [ 18.274119] Register r0 information: non-slab/vmalloc memory [ 18.279825] Register r1 information: non-slab/vmalloc memory [ 18.285523] Register r2 information: NULL pointer [ 18.290260] Register r3 information: non-slab/vmalloc memory [ 18.295957] Register r4 information: NULL pointer [ 18.300693] Register r5 information: slab kmalloc-1k start c36b9000 pointer offset 132 size 1024 [ 18.309569] Register r6 information: NULL pointer [ 18.314306] Register r7 information: slab kmalloc-1k start c36b9000 pointer offset 0 size 1024 [ 18.322999] Register r8 information: NULL pointer [ 18.327736] Register r9 information: NULL pointer [ 18.332473] Register r10 information: non-slab/vmalloc memory [ 18.338257] Register r11 information: slab kmalloc-4k start c219e000 pointer offset 1408 size 4096 [ 18.347301] Register r12 information: non-paged memory [ 18.352475] Process ip (pid: 168, stack limit = 0x7eb0d4ab) [ 18.358089] Stack: (0xc3104440 to 0xc3258000) (too big a stack to show)I can confirm that it crashes on net-next/master as well:
commitfe8152b38d3a, using the same DTB that defines thecpsw_newport as the DSA master. Relevant DTS snippet from my in-development driver:+&spi0 {
(quoted diff) +23
-0+ #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + ocelot-chip@0 { + compatible = "mscc,vsc7512_mfd_spi"; + spi-max-frequency = <2500000>; + reg = <0>; + + ethernet-switch@0 { + compatible = "mscc,vsc7512-ext-switch"; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "cpu"; + status = "okay"; + ethernet = <&mac_sw>; + phy-handle = <&sw_phy0>; + phy-mode = "internal"; + };
Quoted 8 lines
I was hoping for an "oh, if a switch is set up in DSA the
page_poolgets set up this way" type scenario. I fully understand that might not be the case, and the issue could be in something I'm doing incorrectly - it certainly wouldn't be the first time.If this patch doesn't make sense I can look deeper. As mentioned, I'm working to get this accepted upstream, so I'll have to figure it out one way or another.
With !pool tweak the patch makes sense.
Toke, wdyt?
Re: [net RFC v1 1/1] page_pool: fix NULL dereference crash
Quoted 115 lines · Alexei Starovoitov
Quoted 113 lines · Colin Foster
Quoted 8 lines · Alexei Starovoitov
Quoted 3 lines · Colin Foster
Check for the existence of page pool params before dereferencing. This can cause crashes in certain conditions.
In what conditions?
Out of tree driver?Hi Alexei,
Thanks for the quick response.
I'm actively working on a DSA driver that is currently out-of-tree, but trying to get it into mainline. But I'm not convinced that's the problem...
I'm using a beagelebone black with the
cpsw_newdriver. There are two tweaks to that driver: the default vlan port is 10 and 11 so there's no conflict betweencpsw_newand DSA, and thendev->max_mtu/rx_packet_maxhave been increased to 1600 to allow for DSA frames larger than the standard MTU of 1500.My focus is on the DSA driver, but the crash happens as soon as I run "ip link set eth0 up" which is invoking the
cpsw_newdriver. Therefore I suspect that the issue is not directly related to the DSA section (ocelot / felix, much of which uses code that is mainline)As I suggested, I haven't dug into what is going on around the
page_poolyet. If there is something that is pre-loading memory at 1500 byte intervals and I broke that, that's entirely on me.[ removes 1600 byte MTU patch and pool patch ]
I can confirm it still crashes when I don't modify the MTU in the
cpsw_newdriver... so that doesn't seem to be it. That crash log is below.# ip link set eth0 up [ 18.074704] cpsw-switch 4a100000.switch: starting ndev. mode: dual_mac [ 18.174286] SMSC LAN8710/LAN8720 4a101000.mdio:00: attached PHY driver (mii_bus:phy_addr=4a101000.mdio:00, irq=POLL) [ 18.185458] 8<--- cut here --- [ 18.188554] Unable to handle kernel paging request at virtual address c3104440 [ 18.195819] [c3104440] *pgd=8300041e(bad) [ 18.199885] Internal error: Oops: 8000000d [#1] SMP ARM [ 18.205148] Modules linked in: [ 18.208233] CPU: 0 PID: 168 Comm: ip Not tainted 5.16.0-05302-g8bd405e6e8a0-dirty #265 [ 18.216201] Hardware name: Generic AM33XX (Flattened Device Tree) [ 18.222328] PC is at 0xc3104440 [ 18.225500] LR is at __page_pool_alloc_pages_slow+0xbc/0x2e0 [ 18.231222] pc : [<c3104440>] lr : [<c0ee06c8>] psr: a00b0013 [ 18.237523] sp : c3104440 ip : 00000020 fp : c219e580 [ 18.242778] r10: c1a04d54 r9 : 00000000 r8 : 00000000 [ 18.248032] r7 : c36b9000 r6 : 00000000 r5 : c36b9084 r4 : 00000000 [ 18.254595] r3 : c07a399c r2 : 00000000 r1 : c325784c r0 : dfa48bc0 [ 18.261162] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 18.268343] Control: 10c5387d Table: 836f0019 DAC: 00000051 [ 18.274119] Register r0 information: non-slab/vmalloc memory [ 18.279825] Register r1 information: non-slab/vmalloc memory [ 18.285523] Register r2 information: NULL pointer [ 18.290260] Register r3 information: non-slab/vmalloc memory [ 18.295957] Register r4 information: NULL pointer [ 18.300693] Register r5 information: slab kmalloc-1k start c36b9000 pointer offset 132 size 1024 [ 18.309569] Register r6 information: NULL pointer [ 18.314306] Register r7 information: slab kmalloc-1k start c36b9000 pointer offset 0 size 1024 [ 18.322999] Register r8 information: NULL pointer [ 18.327736] Register r9 information: NULL pointer [ 18.332473] Register r10 information: non-slab/vmalloc memory [ 18.338257] Register r11 information: slab kmalloc-4k start c219e000 pointer offset 1408 size 4096 [ 18.347301] Register r12 information: non-paged memory [ 18.352475] Process ip (pid: 168, stack limit = 0x7eb0d4ab) [ 18.358089] Stack: (0xc3104440 to 0xc3258000) (too big a stack to show)I can confirm that it crashes on net-next/master as well:
commitfe8152b38d3a, using the same DTB that defines thecpsw_newport as the DSA master. Relevant DTS snippet from my in-development driver:+&spi0 {
(quoted diff) +23
-0+ #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + ocelot-chip@0 { + compatible = "mscc,vsc7512_mfd_spi"; + spi-max-frequency = <2500000>; + reg = <0>; + + ethernet-switch@0 { + compatible = "mscc,vsc7512-ext-switch"; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "cpu"; + status = "okay"; + ethernet = <&mac_sw>; + phy-handle = <&sw_phy0>; + phy-mode = "internal"; + };I was hoping for an "oh, if a switch is set up in DSA the
page_poolgets set up this way" type scenario. I fully understand that might not be the case, and the issue could be in something I'm doing incorrectly - it certainly wouldn't be the first time.
Quoted 7 lines
Quoted 3 lines
If this patch doesn't make sense I can look deeper. As mentioned, I'm working to get this accepted upstream, so I'll have to figure it out one way or another.
With !pool tweak the patch makes sense.
Toke, wdyt?
I don't really see how page_pool_set_pp_info() can be called with a NULL 'pool' pointer. There are only two callers:__page_pool_alloc_page_order() and __page_pool_alloc_pages_slow(). And both functions deref the pool pointer right before calling page_pool_set_pp_info(), so I don't really see how this patch would actually be a proper fix?
Looking a bit closer, actually the fault seems like it lies with the driver; Colin, could you please check if the patch below fixes your issue?
I'll go check all the other drivers as well and send a fix for all that are affected...
-Toke
drivers/net/ethernet/ti/cpsw_priv.c +1 -1
@@ -1146,7 +1146,7 @@ int cpsw_fill_rx_channels(struct cpsw_priv *priv)static struct page_pool *cpsw_create_page_pool (struct cpsw_common *cpsw,int size) { -struct page_pool_params pp_params; +struct page_pool_params pp_params = {};struct page_pool *pool; pp_params.order =0 ;
Re: [net RFC v1 1/1] page_pool: fix NULL dereference crash
In reply to Alexei StarovoitovQuoted 17 lines · Alexei Starovoitov
Quoted 3 lines · Colin Foster
Check for the existence of page pool params before dereferencing. This can cause crashes in certain conditions.
In what conditions?
Out of tree driver?Quoted 8 lines
Fixes 35b2e549894b ("page_pool: Add callback to init pages when they areallocated")
Signed-off-by Colin Foster <[email protected]>--- net/core/page_pool.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Quoted 10 lines
net/core/page_pool.c static void page_pool_set_pp_info(struct page_pool *pool, · line 216
Quoted 10 lines
net/core/page_pool.c +1
-1@@ -213,7 +213,7 @@ static void page_pool_set_pp_info(struct page_pool *pool, { page->pp = pool; page->pp_magic |=PP_SIGNATURE ; -if (pool->p.init_callback) +if (pool->p && pool->p.init_callback)
And my apologies - this should be if (pool... not if (pool->p. kernelbot will be sure to tell me of this blunder soon
Quoted 6 lines
Quoted 6 lines
net/core/page_pool.c +0
-1pool->p.init_callback (page, pool->p.init_arg); } --2.25.1
Re: [net RFC v1 1/1] page_pool: fix NULL dereference crash
Quoted 18 lines · Colin Foster
Quoted 17 lines · Alexei Starovoitov
Quoted 3 lines · Colin Foster
Check for the existence of page pool params before dereferencing. This can cause crashes in certain conditions.
In what conditions?
Out of tree driver?Quoted 8 lines
Fixes 35b2e549894b ("page_pool: Add callback to init pages when they areallocated")
Signed-off-by Colin Foster <[email protected]>--- net/core/page_pool.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Quoted 13 lines
Quoted 10 lines
net/core/page_pool.c static void page_pool_set_pp_info(struct page_pool *pool, · line 216
Quoted 10 lines
net/core/page_pool.c +1
-1@@ -213,7 +213,7 @@ static void page_pool_set_pp_info(struct page_pool *pool, { page->pp = pool; page->pp_magic |=PP_SIGNATURE ; -if (pool->p.init_callback) +if (pool->p && pool->p.init_callback)And my apologies - this should be if (pool... not if (
pool->p. kernelbot will be sure to tell me of this blunder soon
Can you confirm if your crash is fixed by this change?
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
net/core/page_pool.c +0
-0pool->p.init_callback (page, pool->p.init_arg); }
Re: [net RFC v1 1/1] page_pool: fix NULL dereference crash
Quoted 35 lines · Jesper Dangaard Brouer
Quoted 18 lines · Colin Foster
Quoted 17 lines · Alexei Starovoitov
Quoted 3 lines · Colin Foster
Check for the existence of page pool params before dereferencing. This can cause crashes in certain conditions.
In what conditions?
Out of tree driver?Quoted 8 lines
Fixes 35b2e549894b ("page_pool: Add callback to init pages when they areallocated")
Signed-off-by Colin Foster <[email protected]>--- net/core/page_pool.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)Quoted 13 lines
Quoted 10 lines
net/core/page_pool.c static void page_pool_set_pp_info(struct page_pool *pool, · line 216
Quoted 10 lines
net/core/page_pool.c +1
-1@@ -213,7 +213,7 @@ static void page_pool_set_pp_info(struct page_pool *pool, { page->pp = pool; page->pp_magic |=PP_SIGNATURE ; -if (pool->p.init_callback) +if (pool->p && pool->p.init_callback)And my apologies - this should be if (pool... not if (
pool->p. kernelbot will be sure to tell me of this blunder soon
Quoted 1 line
Can you confirm if your crash is fixed by this change?
Yes, this is confirmed. I'd obviously like to make a more comprehensive commit message - my main question is "is this an issue for all DSA configurations?" Seemingly that is the case, but like I said, I'm unfamiliar with this code. I'll see if I can get a better understanding before sending the real patch early next week.
Quoted 5 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
net/core/page_pool.c +0
-0pool->p.init_callback (page, pool->p.init_arg); }
kernel test robot
build botRe: [net RFC v1 1/1] page_pool: fix NULL dereference crash
In reply to Colin Fosterreproduce (this is a W=1 build): wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross #…
Hi Colin,
[FYI, it's a private test report for your RFC patch.] [auto build test ERROR on net/master]
url: https://github.com/0day-ci/linux/commits/Colin-Foster/Fix-NULL-pointer-dereference-in-page_pool/20220122-085826 base: https://git.kernel.org/pub/scm/linux/kernel/git/davem/net.git 03c82e80ec283b115c56026ecdb95c901a57c51e config: arc-randconfig-r043-20220122 (https://download.01.org/0day-ci/archive/20220122/202201221122.LOf7DZi6-lkp(a)intel.com/config) compiler: arceb-elf-gcc (GCC) 11.2.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# https://github.com/0day-ci/linux/commit/6b2d9e5c2901873c8bba988d4db6cd5bfbaaeec4
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Colin-Foster/Fix-NULL-pointer-dereference-in-page_pool/20220122-085826 git checkout 6b2d9e5c2901873c8bba988d4db6cd5bfbaaeec4
# save the config file to linux build tree
mkdir build_dir
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.2.0 make.cross O=build_dir ARCH=arc SHELL=/bin/bash net/core/
If you fix the issue, kindly add following tag as appropriate
All errors (new ones prefixed by >>):
net/core/page_pool.c: In function 'page_pool_set_pp_info':
>> net/core/page_pool.c:216:13: error: used struct type value where scalar is required
216 | if (pool->p && pool->p.init_callback)
| ^~~~vim +216 net/core/page_pool.c
210
211 static void page_pool_set_pp_info(struct page_pool *pool,
212 struct page *page)
213 {
214 page->pp = pool;
215 page->pp_magic |= PP_SIGNATURE;
> 216 if (pool->p && pool->p.init_callback)
217 pool->p.init_callback(page, pool->p.init_arg);
218 }
219
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org