imx8mm_beacon/imx8mn_beacon: Update build instructions
PATCH v2 1/1 imx8mm_beacon/imx8mn_beacon: Update build instructions
With binman generating flash.bin, it's not longer necessary to specify either the location of ATF nor is it necessary to specify building flash.bin, so let's update the build instructions to remove those. While in here, update the revision of ATF and DDR firmware so both Mini and Nano reference the same revision.
---
V2: Use tag lf-5.10.72-2.2.0 for ATF instead of branch.
Fix small typo in Nano readme
board/beacon/imx8mm/README +6 -6
@@ -12,21 +12,21 @@ Get and Build the ARM Trusted firmware Note: $(srctree) is U-Boot source directory $ git clone https://source.codeaurora.org/external/imx/imx-atf -$ git checkout imx_5.4.70_2.3.0 +$ git lf-5.10.72-2.2.0 $ make PLAT=imx8mm bl31 CROSS_COMPILE=aarch64-linux-gnu- $ cp build/imx8mm/release/bl31.bin $(srctree) Get the DDR firmware ==================== -$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.5.bin -$ chmod +x firmware-imx-8.5.bin -$ ./firmware-imx-8.5 -$ cp firmware-imx-8.5/firmware/ddr/synopsys/lpddr4*.bin $(srctree) +$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.9.bin +$ chmod +x firmware-imx-8.9.bin +$ ./firmware-imx-8.9 +$ cp firmware-imx-8.9/firmware/ddr/synopsys/lpddr4*.bin $(srctree) Build U-Boot ============ $ make imx8mm_beacon_defconfig -$ make flash.bin CROSS_COMPILE=aarch64-linux-gnu- +$ make CROSS_COMPILE=aarch64-linux-gnu- Burn U-Boot to microSD Card ===========================
board/beacon/imx8mn/README +3 -3
@@ -12,9 +12,9 @@ Get and Build the ARM Trusted firmware Note: $(srctree) is U-Boot source directory $ git clone https://source.codeaurora.org/external/imx/imx-atf -$ git checkout imx_5.4.47_2.2.0 +$ git lf-5.10.72-2.2.0 $ make PLAT=imx8mn bl31 CROSS_COMPILE=aarch64-linux-gnu- -$ cp build/imx8mm/release/bl31.bin $(srctree) +$ cp build/imx8mn/release/bl31.bin $(srctree) Get the DDR firmware ====================
@@ -26,7 +26,7 @@ $ cp firmware-imx-8.9/firmware/ddr/synopsys/lpddr4*.bin $(srctree) Build U-Boot ============ $ make imx8mn_beacon_defconfig -$ make flash.bin CROSS_COMPILE=aarch64-linux-gnu- ATF_LOAD_ADDR=0x960000 +$ make CROSS_COMPILE=aarch64-linux-gnu- Burn U-Boot to microSD Card ===========================
Signature · 1 line
2.32.0
Quoted 2 lines · Adam Ford
With binman generating flash.bin, it's not longer necessary to
s/not/no
board/beacon/imx8mm/README Get and Build the ARM Trusted firmware · line 15
Quoted 10 lines
board/beacon/imx8mm/README +1
-1@@ -12,21 +12,21 @@ Get and Build the ARM Trusted firmware Note: $(srctree) is U-Boot source directory $ git clone https://source.codeaurora.org/external/imx/imx-atf -$ git checkout imx_5.4.70_2.3.0 +$ git lf-5.10.72-2.2.0
git checkout lf-5.10.72-2.2.0
board/beacon/imx8mm/README Get and Build the ARM Trusted firmware · line 17
Quoted 3 lines
board/beacon/imx8mm/README +1
-1$ git clone https://source.codeaurora.org/external/imx/imx-atf -$ git checkout imx_5.4.47_2.2.0 +$ git lf-5.10.72-2.2.0
git checkout lf-5.10.72-2.2.0
PATCH v2 1/1 imx8mm_beacon/imx8mn_beacon: Update build instructions
In reply to Adam FordQuoted 7 lines
With binman generating flash.bin, it's not longer necessary to specify either the location of ATF nor is it necessary to specify building flash.bin, so let's update the build instructions to remove those. While in here, update the revision of ATF and DDR firmware so both Mini and Nano reference the same revision.
Signed-off-by Adam Ford <[email protected]>Reviewed-by Fabio Estevam <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] =====================================================================