DC Patches Jan 23, 2022
cover DC Patches Jan 23, 2022
This DC patchset brings improvements in multiple areas. In summary, we have:
- Z9 improvements
- Clocks management adjustments
- Code cleanup
- Improve DSC and MST code
Thanks
Siqueira
Alvin Lee (1):
drm/amd/display: Driver support for MCLK query tool
Anthony Koo (1):
drm/amd/display: [FW Promotion] Release 0.0.101.0
Aric Cyr (2):
drm/amd/display: 3.2.170
drm/amd/display: Remove unnecessary function definition
David Galiffi (2):
drm/amd/display: Fix disabling dccg clocks
drm/amd/display: Disable physym clock
Eric Yang (2):
drm/amd/display: fix zstate allow interface to PMFW drm/amd/display: add debug option for z9 disable interface
Fangzhi Zuo (3):
drm/amd/display: Add Synaptics Fifo Reset Workaround drm/amd/display: Retrieve MST Downstream Port Status drm/amd/display: Add DSC Enable for Synaptics Hub
Ian Chen (1):
drm/amd/display: Change return type of dm_helpers_dp_mst_stop_top_mgr
Josip Pavic (1):
drm/amd/display: do not compare integers of different widths
Martin Tsai (1):
drm/amd/display: add protection in link encoder matching logic
Nicholas Kazlauskas (2):
drm/amd/display: Only set PSR version when valid drm/amd/display: Use PSR version selected during set_psr_caps
Oliver Logush (1):
drm/amd/display: Basic support with device ID
Reza Amini (1):
drm/amd/display: Update VSC HDR infoPacket on TF change
Roy Chan (1):
drm/amd/display: Support synchronized indirect reg access
Shen, George (1):
drm/amd/display: Add Cable ID support for native DP
Sung Joon Kim (1):
drm/amd/display: remove PHY repeater count check for LTTPR mode
Varone (1):
drm/amd/display: Change error to warning when hpd remains low for eDP
Wayne Lin (1):
drm/amd/display: Reset preferred training settings immediately
Wenjing Liu (1):
drm/amd/display: allow set dp drive setting when stream is not present
.../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 4 +- .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h | 1 + .../amd/display/amdgpu_dm/amdgpu_dm_debugfs.c | 2 +- .../amd/display/amdgpu_dm/amdgpu_dm_helpers.c | 205 ++++++++++++++++-- .../display/amdgpu_dm/amdgpu_dm_mst_types.c | 25 ++- .../display/amdgpu_dm/amdgpu_dm_mst_types.h | 10 + .../drm/amd/display/amdgpu_dm/amdgpu_dm_psr.c | 6 +- .../amd/display/dc/clk_mgr/dcn31/dcn31_smu.c | 6 +- drivers/gpu/drm/amd/display/dc/core/dc_link.c | 64 +++--- .../gpu/drm/amd/display/dc/core/dc_link_dp.c | 128 +++++------ .../drm/amd/display/dc/core/dc_link_enc_cfg.c | 23 +- .../drm/amd/display/dc/core/dc_link_hwss.c | 22 +- .../gpu/drm/amd/display/dc/core/dc_resource.c | 3 +- drivers/gpu/drm/amd/display/dc/dc.h | 5 +- drivers/gpu/drm/amd/display/dc/dc_dp_types.h | 16 ++ drivers/gpu/drm/amd/display/dc/dc_helper.c | 60 +++++ drivers/gpu/drm/amd/display/dc/dc_link.h | 10 +- drivers/gpu/drm/amd/display/dc/dce/dmub_psr.c | 4 + .../display/dc/dce110/dce110_hw_sequencer.c | 2 +- .../gpu/drm/amd/display/dc/dcn20/dcn20_dccg.h | 15 +- .../drm/amd/display/dc/dcn20/dcn20_resource.c | 2 +- .../drm/amd/display/dc/dcn30/dcn30_hwseq.c | 5 - .../drm/amd/display/dc/dcn30/dcn30_hwseq.h | 3 - .../gpu/drm/amd/display/dc/dcn30/dcn30_init.c | 2 +- .../gpu/drm/amd/display/dc/dcn31/dcn31_dccg.c | 106 ++++++--- .../gpu/drm/amd/display/dc/dcn31/dcn31_dccg.h | 6 + .../drm/amd/display/dc/dcn31/dcn31_resource.c | 1 + drivers/gpu/drm/amd/display/dc/dm_helpers.h | 2 +- .../drm/amd/display/dc/dml/display_mode_vba.c | 24 ++ .../drm/amd/display/dc/dml/display_mode_vba.h | 1 + .../gpu/drm/amd/display/dc/inc/dc_link_dp.h | 4 +- .../gpu/drm/amd/display/dc/inc/link_enc_cfg.h | 3 + .../gpu/drm/amd/display/dc/inc/reg_helper.h | 34 +++ .../gpu/drm/amd/display/dmub/inc/dmub_cmd.h | 9 +- .../gpu/drm/amd/display/include/dal_asic_id.h | 2 + .../amd/display/include/ddc_service_types.h | 3 + .../amd/display/modules/inc/mod_info_packet.h | 3 +- .../display/modules/info_packet/info_packet.c | 25 ++- 38 files changed, 641 insertions(+), 205 deletions(-)
Signature · 1 line
2.25.1
PATCH 1/24 drm/amd/display: add protection in link encoder matching logic
From: Martin Tsai <[email protected]>
[Why]
Link encoders are created based on its engine ID. The position of a link encoder in an array could be null since it didn't be allocated. Current matching logic didn't consider this situation and could get null encoder.
[How]
To add null encoder check to make the matching logic can go to next to get a valid one.
--- .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 2 +- drivers/gpu/drm/amd/display/dc/core/dc_link.c | 11 +--- .../gpu/drm/amd/display/dc/core/dc_link_dp.c | 66 ++----------------- .../drm/amd/display/dc/core/dc_link_enc_cfg.c | 23 ++++++- .../drm/amd/display/dc/core/dc_link_hwss.c | 22 ++----- .../gpu/drm/amd/display/dc/inc/dc_link_dp.h | 1 - .../gpu/drm/amd/display/dc/inc/link_enc_cfg.h | 3 + 7 files changed, 36 insertions(+), 92 deletions(-)
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +1 -1
@@ -8366,7 +8366,7 @@ void amdgpu_dm_connector_init_helper(struct amdgpu_display_manager *dm,break ;case DRM_MODE_CONNECTOR_DisplayPort: aconnector->base.polled =DRM_CONNECTOR_POLL_HPD ; - link->link_enc =dp_get_link_enc (link); + link->link_enc =link_enc_cfg_get_link_enc (link);ASSERT (link->link_enc);if (link->link_enc) aconnector->base.ycbcr_420_allowed =
drivers/gpu/drm/amd/display/dc/core/dc_link.c +1 -10
@@ -4620,16 +4620,7 @@ bool dc_link_is_fec_supported(const struct dc_link *link)*/ struct link_encoder *link_enc =NULL ; -/* Links supporting dynamically assigned link encoder will be assigned next -* available encoder if one not already assigned. -*/ -if (link->is_dig_mapping_flexible && - link->dc->res_pool->funcs->link_encs_assign) { - link_enc =link_enc_cfg_get_link_enc_used_by_link (link->ctx->dc, link); -if (link_enc ==NULL ) - link_enc =link_enc_cfg_get_next_avail_link_enc (link->ctx->dc); - }else - link_enc = link->link_enc; + link_enc =link_enc_cfg_get_link_enc (link);ASSERT (link_enc); return (dc_is_dp_signal(link->connector_signal) && link_enc &&
drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c +5 -61
102 lines not on this page · raw message
drivers/gpu/drm/amd/display/dc/core/dc_link_enc_cfg.c +22 -1
@@ -486,7 +486,8 @@ struct link_encoder *link_enc_cfg_get_next_avail_link_enc(struct dc *dc) }for (i =0 ; i < dc->res_pool->res_cap->num_dig_link_enc; i++) { -if (encs_assigned[i] ==ENGINE_ID_UNKNOWN ) { +if (encs_assigned[i] ==ENGINE_ID_UNKNOWN && + dc->res_pool->link_encoders[i] !=NULL ) { link_enc = dc->res_pool->link_encoders[i];break ; }
@@ -506,6 +507,26 @@ struct link_encoder *link_enc_cfg_get_link_enc_used_by_stream(return link_enc; } +struct link_encoder *link_enc_cfg_get_link_enc ( +const struct dc_link *link) +{ +struct link_encoder *link_enc =NULL ; + +/* Links supporting dynamically assigned link encoder will be assigned next +* available encoder if one not already assigned. +*/ +if (link->is_dig_mapping_flexible && + link->dc->res_pool->funcs->link_encs_assign) { + link_enc =link_enc_cfg_get_link_enc_used_by_link (link->ctx->dc, link); +if (link_enc ==NULL ) + link_enc =link_enc_cfg_get_next_avail_link_enc ( + link->ctx->dc); + }else + link_enc = link->link_enc; + +return link_enc; +} +bool link_enc_cfg_is_link_enc_avail (struct dc *dc,enum engine_id eng_id,struct dc_link *link) {bool is_avail = true;
drivers/gpu/drm/amd/display/dc/core/dc_link_hwss.c +4 -18
@@ -86,11 +86,7 @@ void dp_enable_link_phy( link->dc->res_pool->dp_clock_source;unsigned int i; -/* Link should always be assigned encoder when en-/disabling. */ -if (link->is_dig_mapping_flexible && dc->res_pool->funcs->link_encs_assign) - link_enc =link_enc_cfg_get_link_enc_used_by_link (dc, link); -else - link_enc = link->link_enc; + link_enc =link_enc_cfg_get_link_enc (link);ASSERT (link_enc);if (link->connector_signal ==SIGNAL_TYPE_EDP ) {
@@ -228,11 +224,7 @@ void dp_disable_link_phy(struct dc_link *link, const struct link_resource *link_struct hpo_dp_link_encoder *hpo_link_enc = link_res->hpo_dp_link_enc;struct link_encoder *link_enc; -/* Link should always be assigned encoder when en-/disabling. */ -if (link->is_dig_mapping_flexible && dc->res_pool->funcs->link_encs_assign) - link_enc =link_enc_cfg_get_link_enc_used_by_link (dc, link); -else - link_enc = link->link_enc; + link_enc =link_enc_cfg_get_link_enc (link);ASSERT (link_enc);if (!link->wa_flags.dp_keep_receiver_powered)
@@ -360,14 +352,8 @@ void dp_set_hw_test_pattern(struct link_encoder *encoder;enum dp_link_encoding link_encoding_format =dp_get_link_encoding_format (&link->cur_link_settings); -/* Access link encoder based on whether it is statically -* or dynamically assigned to a link. -*/ -if (link->is_dig_mapping_flexible && - link->dc->res_pool->funcs->link_encs_assign) - encoder =link_enc_cfg_get_link_enc_used_by_link (link->ctx->dc, link); -else - encoder = link->link_enc; + encoder =link_enc_cfg_get_link_enc (link); +ASSERT (encoder); pattern_param.dp_phy_pattern = test_pattern; pattern_param.custom_pattern = custom_pattern;
drivers/gpu/drm/amd/display/dc/inc/dc_link_dp.h +0 -1
@@ -171,7 +171,6 @@ uint8_t dc_dp_initialize_scrambling_data_symbols(enum dc_status dp_set_fec_ready (struct dc_link *link,const struct link_resource *link_res,bool ready);void dp_set_fec_enable (struct dc_link *link,bool enable); -struct link_encoder *dp_get_link_enc (struct dc_link *link);bool dp_set_dsc_enable (struct pipe_ctx *pipe_ctx,bool enable);bool dp_set_dsc_pps_sdp (struct pipe_ctx *pipe_ctx,bool enable,bool immediate_update);void dp_set_dsc_on_stream (struct pipe_ctx *pipe_ctx,bool enable);
drivers/gpu/drm/amd/display/dc/inc/link_enc_cfg.h +3 -0
@@ -96,6 +96,9 @@ struct link_encoder *link_enc_cfg_get_link_enc_used_by_stream(struct dc *dc, const struct dc_stream_state *stream); +/* Return DIG link encoder. NULL if unused. */ +struct link_encoder *link_enc_cfg_get_link_enc (const struct dc_link *link); +/* Return true if encoder available to use. */ bool link_enc_cfg_is_link_enc_avail (struct dc *dc,enum engine_id eng_id,struct dc_link *link);
Signature · 1 line
2.25.1
PATCH 2/24 drm/amd/display: do not compare integers of different widths
In reply to Rodrigo SiqueiraFrom: Josip Pavic <[email protected]>
[Why & How]
Increase width of some variables to avoid comparing integers of different widths
--- drivers/gpu/drm/amd/display/dc/core/dc_link.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/gpu/drm/amd/display/dc/core/dc_link.c +2 -2
@@ -4743,7 +4743,7 @@ const struct link_resource *dc_link_get_cur_link_res(const struct dc_link *link)void dc_get_cur_link_res_map (const struct dc *dc,uint32_t *map) {struct dc_link *link; -uint8_t i; +uint32_t i;uint32_t hpo_dp_recycle_map =0 ; *map =0 ;
@@ -4784,7 +4784,7 @@ void dc_get_cur_link_res_map(const struct dc *dc, uint32_t *map)void dc_restore_link_res_map (const struct dc *dc,uint32_t *map) {struct dc_link *link; -uint8_t i; +uint32_t i;unsigned int available_hpo_dp_count;uint32_t hpo_dp_recycle_map = (*map &LINK_RES_HPO_DP_REC_MAP__MASK ) >>LINK_RES_HPO_DP_REC_MAP__SHIFT ;
Signature · 1 line
2.25.1
PATCH 3/24 drm/amd/display: Driver support for MCLK query tool
In reply to Rodrigo SiqueiraFrom: Alvin Lee <[email protected]>
Implement handling for escape call to query the MCLK switch support for the current display config.
--- .../drm/amd/display/dc/dml/display_mode_vba.c | 24 +++++++++++++++++++ .../drm/amd/display/dc/dml/display_mode_vba.h | 1 + 2 files changed, 25 insertions(+)
drivers/gpu/drm/amd/display/dc/dml/display_mode_vba.c +24 -0
@@ -47,6 +47,7 @@ static void recalculate_params( unsigned int num_pipes);static unsigned int CursorBppEnumToBits (enum cursor_bpp ebpp); +static void cache_debug_params (struct display_mode_lib *mode_lib); unsigned int dml_get_voltage_level( struct display_mode_lib *mode_lib,
@@ -73,6 +74,7 @@ unsigned int dml_get_voltage_level(PixelClockAdjustmentForProgressiveToInterlaceUnit (mode_lib); } mode_lib->funcs.validate (mode_lib); +cache_debug_params (mode_lib);return mode_lib->vba.VoltageLevel; }
@@ -745,6 +747,28 @@ static void fetch_pipe_params(struct display_mode_lib *mode_lib) mode_lib->vba.HostVMEnable = mode_lib->vba.HostVMEnable && !!ip->hostvm_enable; } +/** +* ******************************************************************************************** +* cache_debug_params: Cache any params that needed to be maintained from the initial validation +* for debug purposes. +* +* The DML getters can modify some of the VBA params that we are interested in (for example when +* calculating with dummy p-state latency), so cache any params here that we want for debugging +* +* @param [in] mode_lib: mode_lib input/output of validate call +* +* @return: void +* +* ******************************************************************************************** +*/ +static void cache_debug_params (struct display_mode_lib *mode_lib) +{ +int k =0 ; + +for (k =0 ; k < mode_lib->vba.NumberOfActivePlanes; k++) + mode_lib->vba.CachedActiveDRAMClockChangeLatencyMargin[k] = mode_lib->vba.ActiveDRAMClockChangeLatencyMargin[k]; +} +// in wm mode we pull the parameters needed from the display_e2e_pipe_params_st structs // rather than working them out as in recalculate_ms static void recalculate_params(
drivers/gpu/drm/amd/display/dc/dml/display_mode_vba.h +1 -0
@@ -195,6 +195,7 @@ struct vba_vars_st {unsigned int LBLatencyHidingSourceLinesY;unsigned int LBLatencyHidingSourceLinesC;double ActiveDRAMClockChangeLatencyMargin[DC__NUM_DPP__MAX ]; +double CachedActiveDRAMClockChangeLatencyMargin[DC__NUM_DPP__MAX ];// Cache in dml_get_voltage_level for debug purposes only double MinActiveDRAMClockChangeMargin;double InitFillLevel;double FinalFillMargin;
Signature · 1 line
2.25.1
PATCH 4/24 drm/amd/display: Change error to warning when hpd remains low for eDP
In reply to Rodrigo SiqueiraFrom: Varone <[email protected]>
[WHY?]
SKUs that contain an unused eDP connector will throw an error when no display is connected.
[HOW?]
Change error to a warning.
--- drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c +1 -1
@@ -793,7 +793,7 @@ void dce110_edp_wait_for_hpd_ready(dal_gpio_destroy_irq (&hpd);if (false == edp_hpd_high) { -DC_LOG_ERROR ( +DC_LOG_WARNING ("%s: wait timed out!\n" , __func__); } }
Signature · 1 line
2.25.1
PATCH 5/24 drm/amd/display: Only set PSR version when valid
In reply to Rodrigo SiqueiraFrom: Nicholas Kazlauskas <[email protected]>
[Why]
DMCUB will hang if we send a PSR unsupported set version command.
This can occur if we fall-through into the default case in the switch statement for PSR version.
[How]
Add an unsupported check after the switch statement.
--- drivers/gpu/drm/amd/display/dc/dce/dmub_psr.c | 4 ++++ 1 file changed, 4 insertions(+)
drivers/gpu/drm/amd/display/dc/dce/dmub_psr.c +4 -0
@@ -138,6 +138,10 @@ static bool dmub_psr_set_version(struct dmub_psr *dmub, struct dc_stream_state * cmd.psr_set_version.psr_set_version_data.version =PSR_VERSION_UNSUPPORTED ;break ; } + +if (cmd.psr_set_version.psr_set_version_data.version ==PSR_VERSION_UNSUPPORTED ) +return false; + cmd.psr_set_version.psr_set_version_data.cmd_version =DMUB_CMD_PSR_CONTROL_VERSION_1 ; cmd.psr_set_version.psr_set_version_data.panel_inst = panel_inst; cmd.psr_set_version.header.payload_bytes =sizeof (struct dmub_cmd_psr_set_version_data );
Signature · 1 line
2.25.1
PATCH 6/24 drm/amd/display: Change return type of dm_helpers_dp_mst_stop_top_mgr
In reply to Rodrigo SiqueiraFrom: Ian Chen <[email protected]>
Prepare for future dm can have different implementation depends on the return value.
--- .../amd/display/amdgpu_dm/amdgpu_dm_helpers.c | 24 ++++--------------- drivers/gpu/drm/amd/display/dc/core/dc_link.c | 14 ++++++----- drivers/gpu/drm/amd/display/dc/dm_helpers.h | 2 +- 3 files changed, 13 insertions(+), 27 deletions(-)
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c +4 -20
@@ -445,40 +445,24 @@ bool dm_helpers_dp_mst_start_top_mgr(return (drm_dp_mst_topology_mgr_set_mst (&aconnector->mst_mgr, true) ==0 ); } -void dm_helpers_dp_mst_stop_top_mgr ( +bool dm_helpers_dp_mst_stop_top_mgr (struct dc_context *ctx,struct dc_link *link) {struct amdgpu_dm_connector *aconnector = link->priv; -uint8_t i;if (!aconnector) {DRM_ERROR ("Failed to find connector for link!" ); -return ; +return false; }DRM_INFO ("DM_MST: stopping TM on aconnector: %p [id: %d]\n" , aconnector, aconnector->base.base.id); -if (aconnector->mst_mgr.mst_state == true) { +if (aconnector->mst_mgr.mst_state == true)drm_dp_mst_topology_mgr_set_mst (&aconnector->mst_mgr, false); -for (i =0 ; i <MAX_SINKS_PER_LINK ; i++) { -if (link->remote_sinks[i] ==NULL ) -continue ; - -if (link->remote_sinks[i]->sink_signal == -SIGNAL_TYPE_DISPLAY_PORT_MST ) { -dc_link_remove_remote_sink (link, link->remote_sinks[i]); - -if (aconnector->dc_sink) { -dc_sink_release (aconnector->dc_sink); - aconnector->dc_sink =NULL ; - aconnector->dc_link->cur_link_settings.lane_count =0 ; - } - } - } - } +return false; } bool dm_helpers_dp_read_dpcd(
drivers/gpu/drm/amd/display/dc/core/dc_link.c +8 -6
@@ -840,20 +840,22 @@ static bool discover_dp_mst_topology(struct dc_link *link, enum dc_detect_reasonreturn link->type == dc_connection_mst_branch; } -static void reset_cur_dp_mst_topology (struct dc_link *link) +static bool reset_cur_dp_mst_topology (struct dc_link *link) { +bool result = false;DC_LOGGER_INIT (link->ctx->logger);LINK_INFO ("link=%d, mst branch is now Disconnected\n" , link->link_index);revert_dpia_mst_dsc_always_on_wa (link); -dm_helpers_dp_mst_stop_top_mgr (link->ctx, link); + result =dm_helpers_dp_mst_stop_top_mgr (link->ctx, link); link->mst_stream_alloc_table.stream_count =0 ;memset (link->mst_stream_alloc_table.stream_allocations,0 ,sizeof (link->mst_stream_alloc_table.stream_allocations)); +return result; } static bool should_prepare_phy_clocks_for_link_verification(const struct dc *dc,
@@ -1305,7 +1307,7 @@ static bool detect_link_and_local_sink(struct dc_link *link,bool dc_link_detect (struct dc_link *link,enum dc_detect_reason reason) {bool is_local_sink_detect_success; -bool is_remote_sink_detect_required = false; +bool is_delegated_to_mst_top_mgr = false;enum dc_connection_type pre_link_type = link->type; is_local_sink_detect_success =detect_link_and_local_sink (link, reason);
@@ -1316,14 +1318,14 @@ bool dc_link_detect(struct dc_link *link, enum dc_detect_reason reason)if (is_local_sink_detect_success && link->local_sink &&dc_is_dp_signal (link->local_sink->sink_signal) && link->dpcd_caps.is_mst_capable) - is_remote_sink_detect_required =discover_dp_mst_topology (link, reason); + is_delegated_to_mst_top_mgr =discover_dp_mst_topology (link, reason);if (is_local_sink_detect_success && pre_link_type == dc_connection_mst_branch && link->type != dc_connection_mst_branch) -reset_cur_dp_mst_topology (link); + is_delegated_to_mst_top_mgr =reset_cur_dp_mst_topology (link); -return is_local_sink_detect_success && !is_remote_sink_detect_required; +return is_local_sink_detect_success && !is_delegated_to_mst_top_mgr; }bool dc_link_get_hpd_state (struct dc_link *dc_link)
drivers/gpu/drm/amd/display/dc/dm_helpers.h +1 -1
@@ -113,7 +113,7 @@ bool dm_helpers_dp_mst_start_top_mgr(const struct dc_link *link, bool boot); -void dm_helpers_dp_mst_stop_top_mgr ( +bool dm_helpers_dp_mst_stop_top_mgr (struct dc_context *ctx,struct dc_link *link);/**
Signature · 1 line
2.25.1
PATCH 7/24 drm/amd/display: Use PSR version selected during set_psr_caps
In reply to Rodrigo SiqueiraFrom: Nicholas Kazlauskas <[email protected]>
[Why]
If the DPCD caps specifies a PSR version newer than PSR_VERSION_1 then we fallback to using PSR_VERSION_1 in amdgpu_dm_set_psr_caps.
This gets overriden with the raw DPCD value in amdgpu_dm_link_setup_psr, which can result in DMCUB hanging if we pass in an unsupported PSR version number.
[How]
Fix the hang by using link->psr_settings.psr_version directly during amdgpu_dm_link_setup_psr.
--- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_psr.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_psr.c +2 -4
@@ -149,10 +149,8 @@ bool amdgpu_dm_link_setup_psr(struct dc_stream_state *stream) link = stream->link; - psr_config.psr_version = link->dpcd_caps.psr_caps.psr_version; - -if (psr_config.psr_version >0 ) { - psr_config.psr_exit_link_training_required =0x1 ; +if (link->psr_settings.psr_version !=DC_PSR_VERSION_UNSUPPORTED ) { + psr_config.psr_version = link->psr_settings.psr_version; psr_config.psr_frame_capture_indication_req =0 ; psr_config.psr_rfb_setup_time =0x37 ; psr_config.psr_sdp_transmit_line_num_deadline =0x20 ;
Signature · 1 line
2.25.1
PATCH 8/24 drm/amd/display: Add Cable ID support for native DP
In reply to Rodrigo SiqueiraFrom: "Shen, George" <[email protected]>
[Why/How]
We need to handle cable capabilities for cables that support cable ID. The cable attributes are intersected with the verified link caps to determine appropriate max link rate. After determining cable attributes we update the DP receiver.
--- drivers/gpu/drm/amd/display/dc/core/dc_link.c | 5 ++ .../gpu/drm/amd/display/dc/core/dc_link_dp.c | 59 +++++++++++++++++++ drivers/gpu/drm/amd/display/dc/dc.h | 2 + drivers/gpu/drm/amd/display/dc/dc_dp_types.h | 16 +++++ drivers/gpu/drm/amd/display/dc/dc_link.h | 7 +++ .../gpu/drm/amd/display/dc/inc/dc_link_dp.h | 3 + 6 files changed, 92 insertions(+)
drivers/gpu/drm/amd/display/dc/core/dc_link.c +5 -0
@@ -1290,6 +1290,8 @@ static bool detect_link_and_local_sink(struct dc_link *link,* Clear dongle_max_pix_clk on disconnect to fix this */ link->dongle_max_pix_clk =0 ; + +dc_link_dp_clear_rx_status (link); } LINK_INFO("link=%d, dc_sink_in=%p is now %s prev_sink=%p edid same=%d\n",
@@ -1969,6 +1971,9 @@ static enum dc_status enable_link_dp(struct dc_state *state,if (link->dpcd_sink_ext_caps.raw !=0 )msleep (post_oui_delay); +// similarly, mode switch can cause loss of cable ID +dpcd_update_cable_id (link); + skip_video_pattern = true;if (link_settings.link_rate ==LINK_RATE_LOW )
drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c +59 -0
100 lines not on this page · raw message
drivers/gpu/drm/amd/display/dc/dc.h +2 -0
@@ -687,6 +687,7 @@ struct dc_debug_options {bool set_mst_en_for_sst;bool disable_uhbr;bool force_dp2_lt_fallback_method; +bool ignore_cable_id;union mem_low_power_enable_options enable_mem_low_power;union root_clock_optimization_options root_clock_optimization;bool hpo_optimization;
@@ -1234,6 +1235,7 @@ struct dpcd_caps {union dp_main_line_channel_coding_cap channel_coding_cap;union dp_sink_video_fallback_formats fallback_formats;union dp_fec_capability1 fec_cap1; +union dp_cable_attributes cable_attributes; };union dpcd_sink_ext_caps {
drivers/gpu/drm/amd/display/dc/dc_dp_types.h +16 -0
@@ -901,6 +901,9 @@ struct dpcd_usb4_dp_tunneling_info {#ifndef DP_LINK_SQUARE_PATTERN #define DP_LINK_SQUARE_PATTERN 0x10F#endif +#ifndef DP_CABLE_ATTRIBUTES_UPDATED_BY_DPTX +#define DP_CABLE_ATTRIBUTES_UPDATED_BY_DPTX 0x110 +#endif #ifndef DP_DSC_CONFIGURATION #define DP_DSC_CONFIGURATION 0x161#endif
@@ -913,6 +916,9 @@ struct dpcd_usb4_dp_tunneling_info {#ifndef DP_128b_132b_TRAINING_AUX_RD_INTERVAL#define DP_128b_132b_TRAINING_AUX_RD_INTERVAL 0x2216#endif +#ifndef DP_CABLE_ATTRIBUTES_UPDATED_BY_DPRX +#define DP_CABLE_ATTRIBUTES_UPDATED_BY_DPRX 0x2217 +#endif #ifndef DP_TEST_264BIT_CUSTOM_PATTERN_7_0 #define DP_TEST_264BIT_CUSTOM_PATTERN_7_0 0X2230#endif
@@ -1011,6 +1017,16 @@ union dp_fec_capability1 {uint8_t raw; }; +union dp_cable_attributes { +struct { +uint8_t UHBR10_20_CAPABILITY :2 ; +uint8_t UHBR13_5_CAPABILITY :1 ; +uint8_t CABLE_TYPE :3 ; +uint8_t RESERVED :2 ; + } bits; +uint8_t raw; +}; +struct dp_color_depth_caps {uint8_t support_6bpc :1 ;uint8_t support_8bpc :1 ;
drivers/gpu/drm/amd/display/dc/dc_link.h +7 -0
@@ -43,6 +43,10 @@ struct dc_link_status {struct dpcd_caps *dpcd_caps; }; +struct dp_receiver_status { +bool cable_id_updated; +}; +/* DP MST stream allocation (payload bandwidth number) */ struct link_mst_stream_allocation {/* DIG front */
@@ -201,6 +205,7 @@ struct dc_link {struct link_mst_stream_allocation_table mst_stream_alloc_table;struct dc_link_status link_status; +struct dp_receiver_status dprx_status;struct link_trace link_trace;struct gpio *hpd_gpio;
@@ -459,4 +464,6 @@ const struct link_resource *dc_link_get_cur_link_res(const struct dc_link *link)void dc_get_cur_link_res_map (const struct dc *dc,uint32_t *map);/* restore link resource allocation state from a snapshot */ void dc_restore_link_res_map (const struct dc *dc,uint32_t *map); + +void dc_link_dp_clear_rx_status (struct dc_link *link);#endif /* DC_LINK_H_ */
drivers/gpu/drm/amd/display/dc/inc/dc_link_dp.h +3 -0
@@ -112,6 +112,9 @@ void dp_set_panel_mode(struct dc_link *link, enum dp_panel_mode panel_mode);bool dp_overwrite_extended_receiver_cap (struct dc_link *link);void dpcd_set_source_specific_data (struct dc_link *link); + +void dpcd_update_cable_id (struct dc_link *link); +/* Write DPCD link configuration data. */ enum dc_status dpcd_set_link_settings( struct dc_link *link,
Signature · 1 line
2.25.1
PATCH 9/24 drm/amd/display: Add Synaptics Fifo Reset Workaround
In reply to Rodrigo SiqueiraFrom: Fangzhi Zuo <[email protected]>
Sequence to reset synaptics SDP fifo before enabling first stream
--- .../amd/display/amdgpu_dm/amdgpu_dm_helpers.c | 133 ++++++++++++++++++ .../display/amdgpu_dm/amdgpu_dm_mst_types.c | 2 +- .../display/amdgpu_dm/amdgpu_dm_mst_types.h | 10 ++ 3 files changed, 144 insertions(+), 1 deletion(-)
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c +133 -0
@@ -536,6 +536,139 @@ bool dm_helpers_submit_i2c(return result; } + +static bool execute_synatpics_rc_command (struct drm_dp_aux *aux, +bool is_write_cmd, +unsigned char cmd, +unsigned int length, +unsigned int offset, +unsigned char *data) +{ +bool success = false; +unsigned char rc_data[16 ] = {0 }; +unsigned char rc_offset[4 ] = {0 }; +unsigned char rc_length[2 ] = {0 }; +unsigned char rc_cmd =0 ; +unsigned char rc_result =0xFF ; +unsigned char i =0 ; +uint8_t ret =0 ; + +if (is_write_cmd) { +// write rc data +memmove (rc_data, data, length); + ret =drm_dp_dpcd_write (aux,SYNAPTICS_RC_DATA , rc_data,sizeof (rc_data)); + } + +// write rc offset + rc_offset[0 ] = (unsigned char ) offset &0xFF ; + rc_offset[1 ] = (unsigned char ) (offset >>8 ) &0xFF ; + rc_offset[2 ] = (unsigned char ) (offset >>16 ) &0xFF ; + rc_offset[3 ] = (unsigned char ) (offset >>24 ) &0xFF ; + ret =drm_dp_dpcd_write (aux,SYNAPTICS_RC_OFFSET , rc_offset,sizeof (rc_offset)); + +// write rc length + rc_length[0 ] = (unsigned char ) length &0xFF ; + rc_length[1 ] = (unsigned char ) (length >>8 ) &0xFF ; + ret =drm_dp_dpcd_write (aux,SYNAPTICS_RC_LENGTH , rc_length,sizeof (rc_length)); + +// write rc cmd + rc_cmd = cmd |0x80 ; + ret =drm_dp_dpcd_write (aux,SYNAPTICS_RC_COMMAND , &rc_cmd,sizeof (rc_cmd)); + +if (ret <0 ) { +DRM_ERROR (" execute_synatpics_rc_command - write cmd ..., err = %d\n" , ret); +return false; + } + +// poll until active is 0 +for (i =0 ; i <10 ; i++) { +drm_dp_dpcd_read (aux,SYNAPTICS_RC_COMMAND , &rc_cmd,sizeof (rc_cmd)); +if (rc_cmd == cmd) +// active is 0 +break ; +msleep (10 ); + } + +// read rc result +drm_dp_dpcd_read (aux,SYNAPTICS_RC_RESULT , &rc_result,sizeof (rc_result)); + success = (rc_result ==0 ); + +if (success && !is_write_cmd) { +// read rc data +drm_dp_dpcd_read (aux,SYNAPTICS_RC_DATA , data, length); + } + +DC_LOG_DC (" execute_synatpics_rc_command - success = %d\n" , success); + +return success; +} + +static void apply_synaptics_fifo_reset_wa (struct drm_dp_aux *aux) +{ +unsigned char data[16 ] = {0 }; + +DC_LOG_DC ("Start apply_synaptics_fifo_reset_wa\n" ); + +// Step 2 + data[0 ] ='P' ; + data[1 ] ='R' ; + data[2 ] ='I' ; + data[3 ] ='U' ; + data[4 ] ='S' ; + +if (!execute_synatpics_rc_command (aux, true,0x01 ,5 ,0 , data)) +return ; + +// Step 3 and 4 +if (!execute_synatpics_rc_command (aux, false,0x31 ,4 ,0x220998 , data)) +return ; + + data[0 ] &= (~(1 <<1 ));// set bit 1 to 0 +if (!execute_synatpics_rc_command (aux, true,0x21 ,4 ,0x220998 , data)) +return ; + +if (!execute_synatpics_rc_command (aux, false,0x31 ,4 ,0x220D98 , data)) +return ; + + data[0 ] &= (~(1 <<1 ));// set bit 1 to 0 +if (!execute_synatpics_rc_command (aux, true,0x21 ,4 ,0x220D98 , data)) +return ; + +if (!execute_synatpics_rc_command (aux, false,0x31 ,4 ,0x221198 , data)) +return ; + + data[0 ] &= (~(1 <<1 ));// set bit 1 to 0 +if (!execute_synatpics_rc_command (aux, true,0x21 ,4 ,0x221198 , data)) +return ; + +// Step 3 and 5 +if (!execute_synatpics_rc_command (aux, false,0x31 ,4 ,0x220998 , data)) +return ; + + data[0 ] |= (1 <<1 );// set bit 1 to 1 +if (!execute_synatpics_rc_command (aux, true,0x21 ,4 ,0x220998 , data)) +return ; + +if (!execute_synatpics_rc_command (aux, false,0x31 ,4 ,0x220D98 , data)) +return ; + + data[0 ] |= (1 <<1 );// set bit 1 to 1 +return ; + +if (!execute_synatpics_rc_command (aux, false,0x31 ,4 ,0x221198 , data)) +return ; + + data[0 ] |= (1 <<1 );// set bit 1 to 1 +if (!execute_synatpics_rc_command (aux, true,0x21 ,4 ,0x221198 , data)) +return ; + +// Step 6 +if (!execute_synatpics_rc_command (aux, true,0x02 ,0 ,0 ,NULL )) +return ; + +DC_LOG_DC ("Done apply_synaptics_fifo_reset_wa\n" ); +} + bool dm_helpers_dp_write_dsc_enable( struct dc_context *ctx, const struct dc_stream_state *stream,
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c +1 -1
@@ -159,7 +159,7 @@ static const struct drm_connector_funcs dm_dp_mst_connector_funcs = { };#if defined(CONFIG_DRM_AMD_DC_DCN ) -static bool needs_dsc_aux_workaround (struct dc_link *link) +bool needs_dsc_aux_workaround (struct dc_link *link) { if (link->dpcd_caps.branch_dev_id == DP_BRANCH_DEVICE_ID_90CC24 && (link->dpcd_caps.dpcd_rev.raw == DPCD_REV_14 || link->dpcd_caps.dpcd_rev.raw == DPCD_REV_12) &&
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.h +10 -0
@@ -26,6 +26,14 @@#ifndef __DAL_AMDGPU_DM_MST_TYPES_H__#define __DAL_AMDGPU_DM_MST_TYPES_H__ +#define DP_BRANCH_DEVICE_ID_90CC24 0x90CC24 + +#define SYNAPTICS_RC_COMMAND 0x4B2 +#define SYNAPTICS_RC_RESULT 0x4B3 +#define SYNAPTICS_RC_LENGTH 0x4B8 +#define SYNAPTICS_RC_OFFSET 0x4BC +#define SYNAPTICS_RC_DATA 0x4C0 +struct amdgpu_display_manager ;struct amdgpu_dm_connector ;
@@ -50,6 +58,8 @@ struct dsc_mst_fairness_vars {bool compute_mst_dsc_configs_for_state (struct drm_atomic_state *state,struct dc_state *dc_state,struct dsc_mst_fairness_vars *vars); + +bool needs_dsc_aux_workaround (struct dc_link *link);#endif #endif
Signature · 1 line
2.25.1
PATCH 10/24 drm/amd/display: Retrieve MST Downstream Port Status
In reply to Rodrigo SiqueiraFrom: Fangzhi Zuo <[email protected]>
Determine if DFP present and the type of downstream device based on dsc_aux
--- .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h | 1 + .../display/amdgpu_dm/amdgpu_dm_mst_types.c | 23 +++++++++++++++++++ 2 files changed, 24 insertions(+)
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h +1 -0
@@ -604,6 +604,7 @@ struct amdgpu_dm_connector {#endif bool force_yuv420_output;struct dsc_preferred_settings dsc_settings; +union dp_downstream_port_present mst_downstream_port_present;/* Cached display modes */ struct drm_display_mode freesync_vid_base;
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c +23 -0
@@ -209,6 +209,25 @@ static bool validate_dsc_caps_on_connector(struct amdgpu_dm_connector *aconnecto return true; } + +bool retrieve_downstream_port_device (struct amdgpu_dm_connector *aconnector) +{ +union dp_downstream_port_present ds_port_present; + +if (!aconnector->dsc_aux) +return false; + +if (drm_dp_dpcd_read (aconnector->dsc_aux,DP_DOWNSTREAMPORT_PRESENT , &ds_port_present,1 ) <0 ) { +DRM_INFO ("Failed to read downstream_port_present 0x05 from DFP of branch device\n" ); +return false; + } + + aconnector->mst_downstream_port_present = ds_port_present; +DRM_INFO ("Downstream port present %d, type %d\n" , + ds_port_present.fields.PORT_PRESENT, ds_port_present.fields.PORT_TYPE); + +return true; +}#endif static int dm_dp_mst_get_modes (struct drm_connector *connector)
@@ -289,6 +308,10 @@ static int dm_dp_mst_get_modes(struct drm_connector *connector)if (!validate_dsc_caps_on_connector (aconnector))memset (&aconnector->dc_sink->dsc_caps,0 ,sizeof (aconnector->dc_sink->dsc_caps)); + +if (!retrieve_downstream_port_device (aconnector)) +memset (&aconnector->mst_downstream_port_present, +0 ,sizeof (aconnector->mst_downstream_port_present));#endif } }
Signature · 1 line
2.25.1
PATCH 11/24 drm/amd/display: Add DSC Enable for Synaptics Hub
In reply to Rodrigo SiqueiraFrom: Fangzhi Zuo <[email protected]>
DSC sequence for non virtual dpcd synaptics hub
--- .../amd/display/amdgpu_dm/amdgpu_dm_helpers.c | 48 +++++++++++++++++++ .../amd/display/include/ddc_service_types.h | 3 ++ 2 files changed, 51 insertions(+)
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c +48 -0
@@ -39,6 +39,7 @@#include "amdgpu_dm_mst_types.h" #include "dm_helpers.h" +#include "ddc_service_types.h" struct monitor_patch_info {unsigned int manufacturer_id;
@@ -537,6 +538,7 @@ bool dm_helpers_submit_i2c(return result; } +#if defined(CONFIG_DRM_AMD_DC_DCN ) static bool execute_synatpics_rc_command(struct drm_dp_aux *aux, bool is_write_cmd, unsigned char cmd,
@@ -669,6 +671,43 @@ static void apply_synaptics_fifo_reset_wa(struct drm_dp_aux *aux)DC_LOG_DC ("Done apply_synaptics_fifo_reset_wa\n" ); } +static uint8_t write_dsc_enable_synaptics_non_virtual_dpcd_mst ( +struct drm_dp_aux *aux, +const struct dc_stream_state *stream, +bool enable) +{ +uint8_t ret =0 ; + +DC_LOG_DC ("Configure DSC to non-virtual dpcd synaptics\n" ); + +if (enable) { +/* When DSC is enabled on previous boot and reboot with the hub, +* there is a chance that Synaptics hub gets stuck during reboot sequence. +* Applying a workaround to reset Synaptics SDP fifo before enabling the first stream +*/ +if (!stream->link->link_status.link_active && +memcmp (stream->link->dpcd_caps.branch_dev_name, + (int8_t *)SYNAPTICS_DEVICE_ID ,4 ) ==0 ) +apply_synaptics_fifo_reset_wa (aux); + + ret =drm_dp_dpcd_write (aux,DP_DSC_ENABLE , &enable,1 ); +DRM_INFO ("Send DSC enable to synaptics\n" ); + + }else { +/* Synaptics hub not support virtual dpcd, +* external monitor occur garbage while disable DSC, +* Disable DSC only when entire link status turn to false, +*/ +if (!stream->link->link_status.link_active) { + ret =drm_dp_dpcd_write (aux,DP_DSC_ENABLE , &enable,1 ); +DRM_INFO ("Send DSC disable to synaptics\n" ); + } + } + +return ret; +} +#endif + bool dm_helpers_dp_write_dsc_enable( struct dc_context *ctx, const struct dc_stream_state *stream,
@@ -687,7 +726,16 @@ bool dm_helpers_dp_write_dsc_enable(if (!aconnector->dsc_aux)return false; +#if defined(CONFIG_DRM_AMD_DC_DCN ) +// apply w/a to synaptics +if (needs_dsc_aux_workaround (aconnector->dc_link) && + (aconnector->mst_downstream_port_present.byte &0x7 ) !=0x3 ) +return write_dsc_enable_synaptics_non_virtual_dpcd_mst ( + aconnector->dsc_aux, stream, enable_dsc); +#endif + ret =drm_dp_dpcd_write (aconnector->dsc_aux,DP_DSC_ENABLE , &enable_dsc,1 ); +DC_LOG_DC ("Send DSC %s to MST RX\n" , enable_dsc ?"enable" :"disable" ); }if (stream->signal ==SIGNAL_TYPE_DISPLAY_PORT || stream->signal ==SIGNAL_TYPE_EDP ) {
drivers/gpu/drm/amd/display/include/ddc_service_types.h +3 -0
@@ -123,4 +123,7 @@ struct av_sync_data {static const uint8_t DP_SINK_DEVICE_STR_ID_1 [] = {7 ,1 ,8 ,7 ,3 ,0 };static const uint8_t DP_SINK_DEVICE_STR_ID_2 [] = {7 ,1 ,8 ,7 ,5 ,0 }; +/*MST Dock*/ +static const uint8_t SYNAPTICS_DEVICE_ID [] ="SYNA" ; +#endif /* __DAL_DDC_SERVICE_TYPES_H__ */
Signature · 1 line
2.25.1
PATCH 12/24 drm/amd/display: Support synchronized indirect reg access
In reply to Rodrigo SiqueiraFrom: Roy Chan <[email protected]>
[Why]
indirect register index/data pair may be used by multi-threads. when it happens, it would cause register access issue that is hard to trace.
[How]
Using cgs service, which provide a sync indirect reg access api.
--- drivers/gpu/drm/amd/display/dc/dc_helper.c | 60 +++++++++++++++++++ .../gpu/drm/amd/display/dc/inc/reg_helper.h | 34 +++++++++++ 2 files changed, 94 insertions(+)
drivers/gpu/drm/amd/display/dc/dc_helper.c +60 -0
@@ -588,6 +588,66 @@ uint32_t generic_indirect_reg_update_ex(const struct dc_context *ctx,return reg_val; } + +uint32_t generic_indirect_reg_update_ex_sync (const struct dc_context *ctx, +uint32_t index,uint32_t reg_val,int n, +uint8_t shift1,uint32_t mask1,uint32_t field_value1, + ...) +{ +uint32_t shift, mask, field_value; +int i =1 ; + +va_list ap; + +va_start (ap, field_value1); + + reg_val =set_reg_field_value_ex (reg_val, field_value1, mask1, shift1); + +while (i < n) { + shift =va_arg (ap, uint32_t); + mask =va_arg (ap, uint32_t); + field_value =va_arg (ap, uint32_t); + + reg_val =set_reg_field_value_ex (reg_val, field_value, mask, shift); + i++; + } + +dm_write_index_reg (ctx,CGS_IND_REG__PCIE , index, reg_val); +va_end (ap); + +return reg_val; +} + +uint32_t generic_indirect_reg_get_sync (const struct dc_context *ctx, +uint32_t index,int n, +uint8_t shift1,uint32_t mask1,uint32_t *field_value1, + ...) +{ +uint32_t shift, mask, *field_value; +uint32_t value =0 ; +int i =1 ; + +va_list ap; + +va_start (ap, field_value1); + + value =dm_read_index_reg (ctx,CGS_IND_REG__PCIE , index); + *field_value1 =get_reg_field_value_ex (value, mask1, shift1); + +while (i < n) { + shift =va_arg (ap, uint32_t); + mask =va_arg (ap, uint32_t); + field_value = va_arg(ap, uint32_t *); + + *field_value =get_reg_field_value_ex (value, mask, shift); + i++; + } + +va_end (ap); + +return value; +} +void reg_sequence_start_gather (const struct dc_context *ctx) {/* if reg sequence is supported and enabled, set flag to
drivers/gpu/drm/amd/display/dc/inc/reg_helper.h +34 -0
@@ -498,6 +498,40 @@ uint32_t generic_indirect_reg_update_ex(const struct dc_context *ctx, uint8_t shift1, uint32_t mask1, uint32_t field_value1, ...); +/* indirect register access +* underlying implementation determines which index/data pair to be used +* in a synchronous way +*/ +#define IX_REG_SET_N_SYNC (index, n, initial_val, ...) \ + generic_indirect_reg_update_ex_sync(CTX, \ + IND_REG(index), \ + initial_val, \ + n, __VA_ARGS__) + +#define IX_REG_SET_2_SYNC (index, init_value, f1, v1, f2, v2) \ + IX_REG_SET_N_SYNC(index, 2, init_value, \ + FN(reg, f1), v1,\ + FN(reg, f2), v2) + +#define IX_REG_GET_N_SYNC (index, n, ...) \ + generic_indirect_reg_get_sync(CTX, \ + IND_REG(index), \ + n, __VA_ARGS__) + +#define IX_REG_GET_SYNC (index, field, val) \ + IX_REG_GET_N_SYNC(index, 1, \ + FN(data_reg_name, field), val) + +uint32_t generic_indirect_reg_get_sync (const struct dc_context *ctx, +uint32_t index,int n, +uint8_t shift1,uint32_t mask1,uint32_t *field_value1, + ...); + +uint32_t generic_indirect_reg_update_ex_sync (const struct dc_context *ctx, +uint32_t index,uint32_t reg_val,int n, +uint8_t shift1,uint32_t mask1,uint32_t field_value1, + ...); +/* register offload macros * * instead of MMIO to register directly, in some cases we want
Signature · 1 line
2.25.1
PATCH 13/24 drm/amd/display: Basic support with device ID
In reply to Rodrigo SiqueiraFrom: Oliver Logush <[email protected]>
[why]
Need to add Cyan Skillfish support by adding the correct Device ID
--- drivers/gpu/drm/amd/display/dc/core/dc_resource.c | 3 ++- drivers/gpu/drm/amd/display/include/dal_asic_id.h | 2 ++ 2 files changed, 4 insertions(+), 1 deletion(-)
drivers/gpu/drm/amd/display/dc/core/dc_resource.c +2 -1
@@ -131,7 +131,8 @@ enum dce_version resource_parse_asic_id(struct hw_asic_id asic_id)case FAMILY_NV : dc_version =DCN_VERSION_2_0 ; -if (asic_id.chip_id ==DEVICE_ID_NV_13FE ) { + +if (asic_id.chip_id ==DEVICE_ID_NV_13FE || asic_id.chip_id ==DEVICE_ID_NV_NAVI10_LITE_P_1400 ) { dc_version =DCN_VERSION_2_01 ;break ; }
drivers/gpu/drm/amd/display/include/dal_asic_id.h +2 -0
@@ -255,6 +255,8 @@ enum {#define DEVICE_ID_TEMASH_9839 0x9839#define DEVICE_ID_TEMASH_983D 0x983D +#define DEVICE_ID_NV_NAVI10_LITE_P_1400 0x1400 // CYAN_SKILLFISH +/* RENOIR */ #define DEVICE_ID_RENOIR_1636 0x1636
Signature · 1 line
2.25.1
PATCH 14/24 drm/amd/display: remove PHY repeater count check for LTTPR mode
In reply to Rodrigo SiqueiraFrom: Sung Joon Kim <[email protected]>
[why]
Due to bad hardware, the PHY repeater count in LTTPR cap is read as 0xFF in some monitors while the LTTPR is actually present.
[how]
Remove PHY repeater counter check when configuring LTTPR mode.
--- drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c +1 -2
@@ -5069,9 +5069,8 @@ bool dp_retrieve_lttpr_cap(struct dc_link *link) DP_LT_TUNABLE_PHY_REPEATER_FIELD_DATA_STRUCTURE_REV];/* Attempt to train in LTTPR transparent mode if repeater count exceeds 8. */ - is_lttpr_present = (dp_convert_to_count (link->dpcd_caps.lttpr_caps.phy_repeater_cnt) !=0 && + is_lttpr_present = (link->dpcd_caps.lttpr_caps.max_lane_count >0 && link->dpcd_caps.lttpr_caps.phy_repeater_cnt <0xff && - link->dpcd_caps.lttpr_caps.max_lane_count >0 && link->dpcd_caps.lttpr_caps.max_lane_count <=4 && link->dpcd_caps.lttpr_caps.revision.raw >=0x14 );if (is_lttpr_present) {
Signature · 1 line
2.25.1
PATCH 15/24 drm/amd/display: Update VSC HDR infoPacket on TF change
In reply to Rodrigo SiqueiraFrom: Reza Amini <[email protected]>
[why]
OnSetSourceContentAttribute it does not trigger an update for the VSC with TF change.
[how]
In this call, create a new VSC infoPacket based on the new config, and allow DisplayTarget decide if an update and pursuant passive flip is necessary
--- .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 2 +- .../amd/display/modules/inc/mod_info_packet.h | 3 ++- .../display/modules/info_packet/info_packet.c | 25 ++++++++++--------- 3 files changed, 16 insertions(+), 14 deletions(-)
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +1 -1
@@ -6494,7 +6494,7 @@ create_stream_for_sink(struct amdgpu_dm_connector *aconnector,if (stream->link->dpcd_caps.dprx_feature.bits.VSC_SDP_COLORIMETRY_SUPPORTED) stream->use_vsc_sdp_for_colorimetry = true; } -mod_build_vsc_infopacket (stream, &stream->vsc_infopacket); +mod_build_vsc_infopacket (stream, &stream->vsc_infopacket, stream->output_color_space); aconnector->psr_skip_count =AMDGPU_DM_PSR_ENTRY_DELAY ; }
drivers/gpu/drm/amd/display/modules/inc/mod_info_packet.h +2 -1
@@ -34,7 +34,8 @@ struct dc_info_packet;struct mod_vrr_params ;void mod_build_vsc_infopacket (const struct dc_stream_state *stream, -struct dc_info_packet *info_packet); +struct dc_info_packet *info_packet, +enum dc_color_space cs);void mod_build_hf_vsif_infopacket (const struct dc_stream_state *stream,struct dc_info_packet *info_packet);
drivers/gpu/drm/amd/display/modules/info_packet/info_packet.c +13 -12
@@ -130,7 +130,8 @@ enum ColorimetryYCCDP { };void mod_build_vsc_infopacket (const struct dc_stream_state *stream, -struct dc_info_packet *info_packet) +struct dc_info_packet *info_packet, +enum dc_color_space cs) {unsigned int vsc_packet_revision = vsc_packet_undefined;unsigned int i;
@@ -331,13 +332,13 @@ void mod_build_vsc_infopacket(const struct dc_stream_state *stream,/* Set Colorimetry format based on pixel encoding */ switch (stream->timing.pixel_encoding) {case PIXEL_ENCODING_RGB : -if ((stream->output_color_space ==COLOR_SPACE_SRGB ) || - (stream->output_color_space ==COLOR_SPACE_SRGB_LIMITED )) +if ((cs ==COLOR_SPACE_SRGB ) || + (cs ==COLOR_SPACE_SRGB_LIMITED )) colorimetryFormat = ColorimetryRGB_DP_sRGB; -else if (stream->output_color_space ==COLOR_SPACE_ADOBERGB ) +else if (cs ==COLOR_SPACE_ADOBERGB ) colorimetryFormat = ColorimetryRGB_DP_AdobeRGB; -else if ((stream->output_color_space ==COLOR_SPACE_2020_RGB_FULLRANGE ) || - (stream->output_color_space ==COLOR_SPACE_2020_RGB_LIMITEDRANGE )) +else if ((cs ==COLOR_SPACE_2020_RGB_FULLRANGE ) || + (cs ==COLOR_SPACE_2020_RGB_LIMITEDRANGE )) colorimetryFormat = ColorimetryRGB_DP_ITU_R_BT2020RGB;break ;
@@ -347,13 +348,13 @@ void mod_build_vsc_infopacket(const struct dc_stream_state *stream,/* Note: xvYCC probably not supported correctly here on DP since colorspace translation * loses distinction between BT601 vs xvYCC601 in translation */ -if (stream->output_color_space ==COLOR_SPACE_YCBCR601 ) +if (cs ==COLOR_SPACE_YCBCR601 ) colorimetryFormat = ColorimetryYCC_DP_ITU601; -else if (stream->output_color_space ==COLOR_SPACE_YCBCR709 ) +else if (cs ==COLOR_SPACE_YCBCR709 ) colorimetryFormat = ColorimetryYCC_DP_ITU709; -else if (stream->output_color_space ==COLOR_SPACE_ADOBERGB ) +else if (cs ==COLOR_SPACE_ADOBERGB ) colorimetryFormat = ColorimetryYCC_DP_AdobeYCC; -else if (stream->output_color_space ==COLOR_SPACE_2020_YCBCR ) +else if (cs ==COLOR_SPACE_2020_YCBCR ) colorimetryFormat = ColorimetryYCC_DP_ITU2020YCbCr;break ;
@@ -391,8 +392,8 @@ void mod_build_vsc_infopacket(const struct dc_stream_state *stream, }/* all YCbCr are always limited range */ -if ((stream->output_color_space ==COLOR_SPACE_SRGB_LIMITED ) || - (stream->output_color_space ==COLOR_SPACE_2020_RGB_LIMITEDRANGE ) || +if ((cs ==COLOR_SPACE_SRGB_LIMITED ) || + (cs ==COLOR_SPACE_2020_RGB_LIMITEDRANGE ) || (pixelEncoding !=0x0 )) { info_packet->sb[17 ] |=0x80 ;/* DB17 bit 7 set to 1 for CEA timing. */ }
Signature · 1 line
2.25.1
PATCH 16/24 drm/amd/display: [FW Promotion] Release 0.0.101.0
In reply to Rodrigo SiqueiraFrom: Anthony Koo <[email protected]>
- Add Scr8 for GPINT messaging between driver and fw
--- drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)
drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h +6 -3
@@ -47,10 +47,10 @@/* Firmware versioning. */ #ifdef DMUB_EXPOSE_VERSION -#define DMUB_FW_VERSION_GIT_HASH 0x56a29f36 +#define DMUB_FW_VERSION_GIT_HASH 0x1288a7b7#define DMUB_FW_VERSION_MAJOR 0#define DMUB_FW_VERSION_MINOR 0 -#define DMUB_FW_VERSION_REVISION 100 +#define DMUB_FW_VERSION_REVISION 101#define DMUB_FW_VERSION_TEST 0#define DMUB_FW_VERSION_VBIOS 0#define DMUB_FW_VERSION_HOTFIX 0
@@ -368,8 +368,9 @@ union dmub_fw_boot_options {/**< 1 if all root clock gating is enabled and low power memory is enabled*/ uint32_t power_optimization: 1; uint32_t diag_env: 1; /* 1 if diagnostic environment */ + uint32_t gpint_scratch8: 1; /* 1 if GPINT is in scratch8*/ - uint32_t reserved : 19; /**< reserved */ + uint32_t reserved : 18; /**< reserved */ } bits;/**< boot bits */ uint32_t all;/**< 32-bit access to bits */ };
@@ -645,6 +646,7 @@ enum dmub_cmd_type {* Command type used for OUTBOX1 notification enable */ DMUB_CMD__OUTBOX1_ENABLE = 71, +/** * Command type used for all idle optimization commands. */
@@ -657,6 +659,7 @@ enum dmub_cmd_type {* Command type used for all panel control commands. */ DMUB_CMD__PANEL_CNTL = 74, +/** * Command type used for interfacing with DPIA. */
Signature · 1 line
2.25.1
PATCH 17/24 drm/amd/display: Reset preferred training settings immediately
In reply to Rodrigo SiqueiraFrom: Wayne Lin <[email protected]>
[Why & How]
In order to easily test ilr by immediately reset the preferred training settings, fix the code to disable skip_immediate_retrain.
--- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c +1 -1
@@ -2851,7 +2851,7 @@ static ssize_t edp_ilr_write(struct file *f, const char __user *buf,kfree (wr_buf);DRM_DEBUG_DRIVER ("Invalid Input value. No HW will be programmed\n" ); prefer_link_settings.use_link_rate_set = false; -dc_link_set_preferred_training_settings (dc,NULL ,NULL , link, true); +dc_link_set_preferred_training_settings (dc,NULL ,NULL , link, false);return size; }
Signature · 1 line
2.25.1
PATCH 18/24 drm/amd/display: 3.2.170
In reply to Rodrigo SiqueiraFrom: Aric Cyr <[email protected]>
This version brings along the following fixes:
- Z9 improvements
- Clocks management adjustments
- Code cleanup
- Improve DSC and MST code
--- drivers/gpu/drm/amd/display/dc/dc.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/amd/display/dc/dc.h +1 -1
@@ -47,7 +47,7 @@ struct aux_payload;struct set_config_cmd_payload ;struct dmub_notification ; -#define DC_VER "3.2.169" +#define DC_VER "3.2.170"#define MAX_SURFACES 3#define MAX_PLANES 6
Signature · 1 line
2.25.1
PATCH 19/24 drm/amd/display: Remove unnecessary function definition
In reply to Rodrigo SiqueiraFrom: Aric Cyr <[email protected]>
--- drivers/gpu/drm/amd/display/dc/dcn30/dcn30_hwseq.c | 5 ----- drivers/gpu/drm/amd/display/dc/dcn30/dcn30_hwseq.h | 3 --- drivers/gpu/drm/amd/display/dc/dcn30/dcn30_init.c | 2 +- 3 files changed, 1 insertion(+), 9 deletions(-)
drivers/gpu/drm/amd/display/dc/dcn30/dcn30_hwseq.c +0 -5
@@ -355,11 +355,6 @@ void dcn30_prepare_bandwidth(struct dc *dc,dcn20_prepare_bandwidth (dc, context); } -void dcn30_optimize_bandwidth (struct dc *dc,struct dc_state *context) -{ -dcn20_optimize_bandwidth (dc, context); -} -void dcn30_disable_writeback (struct dc *dc,unsigned int dwb_pipe_inst)
drivers/gpu/drm/amd/display/dc/dcn30/dcn30_hwseq.h +0 -3
@@ -50,9 +50,6 @@ void dcn30_disable_writeback(void dcn30_prepare_bandwidth (struct dc *dc,struct dc_state *context); -void dcn30_optimize_bandwidth (struct dc *dc, -struct dc_state *context); - bool dcn30_mmhubbub_warmup( struct dc *dc, unsigned int num_dwb,
drivers/gpu/drm/amd/display/dc/dcn30/dcn30_init.c +1 -1
@@ -60,7 +60,7 @@ static const struct hw_sequencer_funcs dcn30_funcs = { .interdependent_update_lock = dcn10_lock_all_pipes, .cursor_lock = dcn10_cursor_lock, .prepare_bandwidth = dcn20_prepare_bandwidth, - .optimize_bandwidth = dcn30_optimize_bandwidth, + .optimize_bandwidth = dcn20_optimize_bandwidth, .update_bandwidth = dcn20_update_bandwidth, .set_drr = dcn10_set_drr, .get_position = dcn10_get_position,
Signature · 1 line
2.25.1
PATCH 20/24 drm/amd/display: allow set dp drive setting when stream is not present
In reply to Rodrigo SiqueiraFrom: Wenjing Liu <[email protected]>
[why]
There is a change previously to disallow DM to set dp drive setings when stream is not present. The logic might not work well with DP PHY complaince scenario with a PHY test fixture attachment. We need to make the method allow DP link drive settings changes even without stream attached to it.
[how]
revert back to previous code in set drive setting function then add an empty link_resource structure, then assign link resource based on current link resource if link resource is allocated to the current pipe.
--- drivers/gpu/drm/amd/display/dc/core/dc_link.c | 30 ++++++++----------- drivers/gpu/drm/amd/display/dc/dc_link.h | 3 +- 2 files changed, 15 insertions(+), 18 deletions(-)
drivers/gpu/drm/amd/display/dc/core/dc_link.c +13 -17
@@ -4454,22 +4454,17 @@ void dc_link_set_drive_settings(struct dc *dc, {int i; -struct pipe_ctx *pipe =NULL ; -const struct link_resource *link_res; +struct link_resource link_res; - link_res =dc_link_get_cur_link_res (link); +for (i =0 ; i < dc->link_count; i++) +if (dc->links[i] == link) +break ; -for (i =0 ; i <MAX_PIPES ; i++) { - pipe = &dc->current_state->res_ctx.pipe_ctx[i]; -if (pipe->stream && pipe->stream->link) { -if (pipe->stream->link == link) -break ; - } - } -if (pipe && link_res) -dc_link_dp_set_drive_settings (pipe->stream->link, link_res, lt_settings); -else +if (i >= dc->link_count)ASSERT_CRITICAL (false); + +dc_link_get_cur_link_res (link, &link_res); +dc_link_dp_set_drive_settings (dc->links[i], &link_res, lt_settings); } void dc_link_set_preferred_link_settings(struct dc *dc,
@@ -4711,23 +4706,24 @@ uint32_t dc_bandwidth_in_kbps_from_timing( } -const struct link_resource *dc_link_get_cur_link_res (const struct dc_link *link) +void dc_link_get_cur_link_res (const struct dc_link *link, +struct link_resource *link_res) {int i;struct pipe_ctx *pipe =NULL ; -const struct link_resource *link_res =NULL ; + +memset (link_res,0 ,sizeof (*link_res));for (i =0 ; i <MAX_PIPES ; i++) { pipe = &link->dc->current_state->res_ctx.pipe_ctx[i];if (pipe->stream && pipe->stream->link && pipe->top_pipe ==NULL ) {if (pipe->stream->link == link) { - link_res = &pipe->link_res; + *link_res = pipe->link_res;break ; } } } -return link_res; }/**
drivers/gpu/drm/amd/display/dc/dc_link.h +2 -1
@@ -459,7 +459,8 @@ bool dc_link_should_enable_fec(const struct dc_link *link);uint32_t dc_link_bw_kbps_from_raw_frl_link_rate_data (uint8_t bw);enum dp_link_encoding dc_link_dp_mst_decide_link_encoding_format (const struct dc_link *link); -const struct link_resource *dc_link_get_cur_link_res (const struct dc_link *link); +void dc_link_get_cur_link_res (const struct dc_link *link, +struct link_resource *link_res);/* take a snapshot of current link resource allocation state */ void dc_get_cur_link_res_map (const struct dc *dc,uint32_t *map);/* restore link resource allocation state from a snapshot */
Signature · 1 line
2.25.1
PATCH 21/24 drm/amd/display: Fix disabling dccg clocks
In reply to Rodrigo SiqueiraFrom: David Galiffi <[email protected]>
[How & Why]
Updated procedure to match hardware programming guide.
--- .../gpu/drm/amd/display/dc/dcn20/dcn20_dccg.h | 7 +++ .../gpu/drm/amd/display/dc/dcn31/dcn31_dccg.c | 44 ++++++++++++------- .../gpu/drm/amd/display/dc/dcn31/dcn31_dccg.h | 1 + 3 files changed, 37 insertions(+), 15 deletions(-)
drivers/gpu/drm/amd/display/dc/dcn20/dcn20_dccg.h +7 -0
@@ -183,8 +183,14 @@type SYMCLK32_ROOT_SE1_GATE_DISABLE ;\type SYMCLK32_ROOT_SE2_GATE_DISABLE ;\type SYMCLK32_ROOT_SE3_GATE_DISABLE ;\ +type SYMCLK32_SE0_GATE_DISABLE ;\ +type SYMCLK32_SE1_GATE_DISABLE ;\ +type SYMCLK32_SE2_GATE_DISABLE ;\ +type SYMCLK32_SE3_GATE_DISABLE ;\type SYMCLK32_ROOT_LE0_GATE_DISABLE ;\type SYMCLK32_ROOT_LE1_GATE_DISABLE ;\ +type SYMCLK32_LE0_GATE_DISABLE ;\ +type SYMCLK32_LE1_GATE_DISABLE ;\type DPSTREAMCLK_ROOT_GATE_DISABLE ;\type DPSTREAMCLK_GATE_DISABLE ;\type HDMISTREAMCLK0_DTO_PHASE ;\
@@ -233,6 +239,7 @@ struct dccg_registers {uint32_t DSCCLK2_DTO_PARAM ;uint32_t DPSTREAMCLK_ROOT_GATE_DISABLE ;uint32_t DPSTREAMCLK_GATE_DISABLE ; +uint32_t DCCG_GATE_DISABLE_CNTL2 ;uint32_t DCCG_GATE_DISABLE_CNTL3 ;uint32_t HDMISTREAMCLK0_DTO_PARAM ;uint32_t DCCG_GATE_DISABLE_CNTL4 ;
drivers/gpu/drm/amd/display/dc/dcn31/dcn31_dccg.c +29 -15
128 lines not on this page · raw message
drivers/gpu/drm/amd/display/dc/dcn31/dcn31_dccg.h +1 -0
@@ -66,6 +66,7 @@SR (DSCCLK1_DTO_PARAM ),\SR (DSCCLK2_DTO_PARAM ),\SR (DSCCLK_DTO_CTRL ),\ +SR (DCCG_GATE_DISABLE_CNTL2 ),\SR (DCCG_GATE_DISABLE_CNTL3 ),\SR (HDMISTREAMCLK0_DTO_PARAM )
Signature · 1 line
2.25.1
PATCH 22/24 drm/amd/display: Disable physym clock
In reply to Rodrigo SiqueiraFrom: David Galiffi <[email protected]>
[How & Why]
Disable physym clock when it's not in use.
--- .../gpu/drm/amd/display/dc/dcn20/dcn20_dccg.h | 8 ++- .../gpu/drm/amd/display/dc/dcn31/dcn31_dccg.c | 62 ++++++++++++++++--- .../gpu/drm/amd/display/dc/dcn31/dcn31_dccg.h | 5 ++ 3 files changed, 63 insertions(+), 12 deletions(-)
drivers/gpu/drm/amd/display/dc/dcn20/dcn20_dccg.h +6 -2
@@ -196,8 +196,12 @@type HDMISTREAMCLK0_DTO_PHASE ;\type HDMISTREAMCLK0_DTO_MODULO ;\type HDMICHARCLK0_GATE_DISABLE ;\ -type HDMICHARCLK0_ROOT_GATE_DISABLE ; - +type HDMICHARCLK0_ROOT_GATE_DISABLE ; \ +type PHYASYMCLK_GATE_DISABLE ; \ +type PHYBSYMCLK_GATE_DISABLE ; \ +type PHYCSYMCLK_GATE_DISABLE ; \ +type PHYDSYMCLK_GATE_DISABLE ; \ +type PHYESYMCLK_GATE_DISABLE ;struct dccg_shift {DCCG_REG_FIELD_LIST (uint8_t )
drivers/gpu/drm/amd/display/dc/dcn31/dcn31_dccg.c +52 -10
112 lines not on this page · raw message
drivers/gpu/drm/amd/display/dc/dcn31/dcn31_dccg.h +5 -0
@@ -136,6 +136,11 @@DCCG_SF (DSCCLK_DTO_CTRL ,DSCCLK0_DTO_ENABLE , mask_sh),\DCCG_SF (DSCCLK_DTO_CTRL ,DSCCLK1_DTO_ENABLE , mask_sh),\DCCG_SF (DSCCLK_DTO_CTRL ,DSCCLK2_DTO_ENABLE , mask_sh),\ +DCCG_SF (DCCG_GATE_DISABLE_CNTL2 ,PHYASYMCLK_GATE_DISABLE , mask_sh),\ +DCCG_SF (DCCG_GATE_DISABLE_CNTL2 ,PHYBSYMCLK_GATE_DISABLE , mask_sh),\ +DCCG_SF (DCCG_GATE_DISABLE_CNTL2 ,PHYCSYMCLK_GATE_DISABLE , mask_sh),\ +DCCG_SF (DCCG_GATE_DISABLE_CNTL2 ,PHYDSYMCLK_GATE_DISABLE , mask_sh),\ +DCCG_SF (DCCG_GATE_DISABLE_CNTL2 ,PHYESYMCLK_GATE_DISABLE , mask_sh),\DCCG_SF (DCCG_GATE_DISABLE_CNTL3 ,DPSTREAMCLK_ROOT_GATE_DISABLE , mask_sh),\DCCG_SF (DCCG_GATE_DISABLE_CNTL3 ,DPSTREAMCLK_GATE_DISABLE , mask_sh),\ DCCG_SF(DCCG_GATE_DISABLE_CNTL3, SYMCLK32_ROOT_SE0_GATE_DISABLE, mask_sh),\
Signature · 1 line
2.25.1
PATCH 23/24 drm/amd/display: fix zstate allow interface to PMFW
In reply to Rodrigo SiqueiraFrom: Eric Yang <[email protected]>
[Why]psr_feature_enabled flag is dynamically updated, and sometimes when zstate allow status is determined the flag has not been set to true yet even on PSR enabled config, lid off/on is such a case, which will result in zstate disabled even though PSR is supported.
[How]
Check the supported PSR version and the PSR disable status instead.
--- drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c +1 -1
@@ -3099,7 +3099,7 @@ static enum dcn_zstate_support_state decide_zstate_support(struct dc *dc, strucif (context->bw_ctx.dml.vba.StutterPeriod >5000.0 )return DCN_ZSTATE_SUPPORT_ALLOW ; -else if (link->psr_settings.psr_feature_enabled) +else if (link->psr_settings.psr_version ==DC_PSR_VERSION_1 && !dc->debug.disable_psr)return DCN_ZSTATE_SUPPORT_ALLOW_Z10_ONLY ;else return DCN_ZSTATE_SUPPORT_DISALLOW ;
Signature · 1 line
2.25.1
PATCH 24/24 drm/amd/display: add debug option for z9 disable interface
In reply to Rodrigo SiqueiraFrom: Eric Yang <[email protected]>
[Why]
To help triage issues and coordinate driver/bios release dependency
[How]
Only enable the new Z9 interface when debug option is set, otherwise treat Z10 only support case as Zstate disallowed.
--- drivers/gpu/drm/amd/display/dc/clk_mgr/dcn31/dcn31_smu.c | 6 +++++- drivers/gpu/drm/amd/display/dc/dc.h | 1 + drivers/gpu/drm/amd/display/dc/dcn31/dcn31_resource.c | 1 + 3 files changed, 7 insertions(+), 1 deletion(-)
drivers/gpu/drm/amd/display/dc/clk_mgr/dcn31/dcn31_smu.c +5 -1
@@ -308,12 +308,16 @@ void dcn31_smu_transfer_wm_table_dram_2_smu(struct clk_mgr_internal *clk_mgr)void dcn31_smu_set_zstate_support (struct clk_mgr_internal *clk_mgr,enum dcn_zstate_support_state support) { -//TODO: Work with smu team to define optimization options. unsigned int msg_id, param;if (!clk_mgr->smu_present)return ; +if (!clk_mgr->base.ctx->dc->debug.enable_z9_disable_interface && + (support ==DCN_ZSTATE_SUPPORT_ALLOW_Z10_ONLY )) + support =DCN_ZSTATE_SUPPORT_DISALLOW ; + +if (support ==DCN_ZSTATE_SUPPORT_ALLOW_Z10_ONLY ) param =1 ;else
drivers/gpu/drm/amd/display/dc/dc.h +1 -0
@@ -703,6 +703,7 @@ struct dc_debug_options {int crb_alloc_policy_min_disp_count;#if defined(CONFIG_DRM_AMD_DC_DCN )bool disable_z10; +bool enable_z9_disable_interface;bool enable_sw_cntl_psr;union dpia_debug_options dpia_debug;#endif
drivers/gpu/drm/amd/display/dc/dcn31/dcn31_resource.c +1 -0
@@ -1033,6 +1033,7 @@ static const struct dc_debug_options debug_defaults_drv = { .optimize_edp_link_rate = true, .enable_sw_cntl_psr = true, .apply_vendor_specific_lttpr_wa = true, + .enable_z9_disable_interface = false };static const struct dc_debug_options debug_defaults_diags = {
Signature · 1 line
2.25.1
[AMD Official Use Only]
Hi all,
This week this patchset was tested on the following systems:
Lenovo Thinkpad T14s Gen2 with AMD Ryzen 5 5650U, with the following display types: eDP 1080p 60hz, 4k 60hz (via USB-C to DP/HDMI), 1440p 144hz (via USB-C to DP/HDMI), 1680*1050 60hz (via USB-C to DP and then DP to DVI/VGA)
Sapphire Pulse RX5700XT with the following display types:
4k 60hz (via DP/HDMI), 1440p 144hz (via DP/HDMI), 1680*1050 60hz (via DP to DVI/VGA)
Reference AMD RX6800 with the following display types:
4k 60hz (via DP/HDMI and USB-C to DP/HDMI), 1440p 144hz (via USB-C to DP/HDMI and USB-C to DP/HDMI), 1680*1050 60hz (via DP to DVI/VGA)
Included testing using a Startech DP 1.4 MST hub at 2x 4k 60hz, and 3x 1080p 60hz on all systems. Also tested DSC via USB-C to DP DSC Hub with 3x 4k 60hz on Ryzen 9 5900h and Ryzen 5 4500u.
Tested on Ubuntu 20.04.3 with Kernel Version 5.13 and ChromeOS
Thank you,
Dan Wheeler
Technologist | AMD
SW Display
------------------------------------------------------------------------------------------------------------------
1 Commerce Valley Dr E, Thornhill, ON L3T 7X6
Facebook | Twitter | amd.com
-----Original Message-----
From: amd-gfx <[email protected]> On Behalf Of Rodrigo Siqueira
Sent: January 23, 2022 1:20 PM
To: [email protected]
Cc: Wang, Chao-kai (Stylon) <[email protected]>; Li, Sun peng (Leo) <[email protected]>; Wentland, Harry <[email protected]>; Zhuo, Qingqing (Lillian) <[email protected]>; Siqueira, Rodrigo <[email protected]>; Li, Roman <[email protected]>; Chiu, Solomon <[email protected]>; Pillai, Aurabindo <[email protected]>; Lin, Wayne <[email protected]>; Lakha, Bhawanpreet <[email protected]>; Gutierrez, Agustin <[email protected]>; Kotarac, Pavle <[email protected]>
Subject: [PATCH 00/24] DC Patches Jan 23, 2022
This DC patchset brings improvements in multiple areas. In summary, we have:
- Z9 improvements
- Clocks management adjustments
- Code cleanup
- Improve DSC and MST code
Thanks
Siqueira
Alvin Lee (1):
drm/amd/display: Driver support for MCLK query tool
Anthony Koo (1):
drm/amd/display: [FW Promotion] Release 0.0.101.0
Aric Cyr (2):
drm/amd/display: 3.2.170
drm/amd/display: Remove unnecessary function definition
David Galiffi (2):
drm/amd/display: Fix disabling dccg clocks
drm/amd/display: Disable physym clock
Eric Yang (2):
drm/amd/display: fix zstate allow interface to PMFW drm/amd/display: add debug option for z9 disable interface
Fangzhi Zuo (3):
drm/amd/display: Add Synaptics Fifo Reset Workaround drm/amd/display: Retrieve MST Downstream Port Status drm/amd/display: Add DSC Enable for Synaptics Hub
Ian Chen (1):
drm/amd/display: Change return type of dm_helpers_dp_mst_stop_top_mgr
Josip Pavic (1):
drm/amd/display: do not compare integers of different widths
Martin Tsai (1):
drm/amd/display: add protection in link encoder matching logic
Nicholas Kazlauskas (2):
drm/amd/display: Only set PSR version when valid drm/amd/display: Use PSR version selected during set_psr_caps
Oliver Logush (1):
drm/amd/display: Basic support with device ID
Reza Amini (1):
drm/amd/display: Update VSC HDR infoPacket on TF change
Roy Chan (1):
drm/amd/display: Support synchronized indirect reg access
Shen, George (1):
drm/amd/display: Add Cable ID support for native DP
Sung Joon Kim (1):
drm/amd/display: remove PHY repeater count check for LTTPR mode
Varone (1):
drm/amd/display: Change error to warning when hpd remains low for eDP
Wayne Lin (1):
drm/amd/display: Reset preferred training settings immediately
Wenjing Liu (1):
drm/amd/display: allow set dp drive setting when stream is not present
.../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 4 +- .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h | 1 + .../amd/display/amdgpu_dm/amdgpu_dm_debugfs.c | 2 +- .../amd/display/amdgpu_dm/amdgpu_dm_helpers.c | 205 ++++++++++++++++-- .../display/amdgpu_dm/amdgpu_dm_mst_types.c | 25 ++- .../display/amdgpu_dm/amdgpu_dm_mst_types.h | 10 + .../drm/amd/display/amdgpu_dm/amdgpu_dm_psr.c | 6 +- .../amd/display/dc/clk_mgr/dcn31/dcn31_smu.c | 6 +- drivers/gpu/drm/amd/display/dc/core/dc_link.c | 64 +++--- .../gpu/drm/amd/display/dc/core/dc_link_dp.c | 128 +++++------ .../drm/amd/display/dc/core/dc_link_enc_cfg.c | 23 +- .../drm/amd/display/dc/core/dc_link_hwss.c | 22 +- .../gpu/drm/amd/display/dc/core/dc_resource.c | 3 +- drivers/gpu/drm/amd/display/dc/dc.h | 5 +- drivers/gpu/drm/amd/display/dc/dc_dp_types.h | 16 ++ drivers/gpu/drm/amd/display/dc/dc_helper.c | 60 +++++ drivers/gpu/drm/amd/display/dc/dc_link.h | 10 +- drivers/gpu/drm/amd/display/dc/dce/dmub_psr.c | 4 + .../display/dc/dce110/dce110_hw_sequencer.c | 2 +- .../gpu/drm/amd/display/dc/dcn20/dcn20_dccg.h | 15 +- .../drm/amd/display/dc/dcn20/dcn20_resource.c | 2 +- .../drm/amd/display/dc/dcn30/dcn30_hwseq.c | 5 - .../drm/amd/display/dc/dcn30/dcn30_hwseq.h | 3 - .../gpu/drm/amd/display/dc/dcn30/dcn30_init.c | 2 +- .../gpu/drm/amd/display/dc/dcn31/dcn31_dccg.c | 106 ++++++--- .../gpu/drm/amd/display/dc/dcn31/dcn31_dccg.h | 6 + .../drm/amd/display/dc/dcn31/dcn31_resource.c | 1 + drivers/gpu/drm/amd/display/dc/dm_helpers.h | 2 +- .../drm/amd/display/dc/dml/display_mode_vba.c | 24 ++ .../drm/amd/display/dc/dml/display_mode_vba.h | 1 + .../gpu/drm/amd/display/dc/inc/dc_link_dp.h | 4 +- .../gpu/drm/amd/display/dc/inc/link_enc_cfg.h | 3 + .../gpu/drm/amd/display/dc/inc/reg_helper.h | 34 +++ .../gpu/drm/amd/display/dmub/inc/dmub_cmd.h | 9 +- .../gpu/drm/amd/display/include/dal_asic_id.h | 2 + .../amd/display/include/ddc_service_types.h | 3 + .../amd/display/modules/inc/mod_info_packet.h | 3 +- .../display/modules/info_packet/info_packet.c | 25 ++- 38 files changed, 641 insertions(+), 205 deletions(-)
--
2.25.1