Skip to contentSkip to conversation

net: tulip: remove redundant assignment to variable new_csr6

PATCH In review Colin Ian King 3 participants 4 messages Jan 23, 2022 – Jan 25, 2022

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 net: tulip: remove redundant assignment to variable new_csr6

Variable new_csr6 is being initialized with a value that is never read, it is being re-assigned later on. The assignment is redundant and can be removed.

---
 drivers/net/ethernet/dec/tulip/pnic.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/dec/tulip/pnic.c +1 -1
index 3fb39e32e1b4..653bde48ef44 100644
@@ -21,7 +21,7 @@ void pnic_do_nway(struct net_device *dev)
 	struct tulip_private *tp = netdev_priv(dev);
 	void __iomem *ioaddr = tp->base_addr;
 	u32 phy_reg = ioread32(ioaddr + 0xB8);
-	u32 new_csr6 = tp->csr6 & ~0x40C40200;
+	u32 new_csr6;
 
 	if (phy_reg & 0x78000000) { /* Ignore baseT4 */
 		if (phy_reg & 0x20000000)		dev->if_port = 5;
Signature · 1 line
2.33.1
maintainer
#1 lore raw

drivers/net/ethernet/dec/tulip/pnic.c void pnic_do_nway(struct net_device *dev) · line 27

Quoted 13 lines · On Sun, 23 Jan 2022 18:34:40 +0000 Colin Ian King wrote:

Variable new_csr6 is being initialized with a value that is never read, it is being re-assigned later on. The assignment is redundant and can be removed.

drivers/net/ethernet/dec/tulip/pnic.c +1 -1
@@ -21,7 +21,7 @@ void pnic_do_nway(struct net_device *dev)
 	struct tulip_private *tp = netdev_priv(dev);
 	void __iomem *ioaddr = tp->base_addr;
 	u32 phy_reg = ioread32(ioaddr + 0xB8);
-	u32 new_csr6 = tp->csr6 & ~0x40C40200;
+	u32 new_csr6;
 
 	if (phy_reg & 0x78000000) { /* Ignore baseT4 */
 		if (phy_reg & 0x20000000)		dev->if_port = 5;

I can't say I see what you mean, it's not set in some cases:

			if (tp->medialock) {
			} else if (tp->nwayset  &&  (dev->if_port & 1)) {
				next_tick = 1*HZ;
			} else if (dev->if_port == 0) {
				dev->if_port = 3;
				iowrite32(0x33, ioaddr + CSR12);
				new_csr6 = 0x01860000;
				iowrite32(0x1F868, ioaddr + 0xB8);
			} else {
				dev->if_port = 0;
				iowrite32(0x32, ioaddr + CSR12);
				new_csr6 = 0x00420000;
				iowrite32(0x1F078, ioaddr + 0xB8);
			}
			if (tp->csr6 != new_csr6) {
				tp->csr6 = new_csr6;

That said clang doesn't complain so maybe I'm missing something static analysis had figured out about this code.

#2 lore raw
Quoted 35 lines · Jakub Kicinski

drivers/net/ethernet/dec/tulip/pnic.c void pnic_do_nway(struct net_device *dev) · line 27

Quoted 13 lines · On Sun, 23 Jan 2022 18:34:40 +0000 Colin Ian King wrote:

Variable new_csr6 is being initialized with a value that is never read, it is being re-assigned later on. The assignment is redundant and can be removed.

drivers/net/ethernet/dec/tulip/pnic.c +1 -1
@@ -21,7 +21,7 @@ void pnic_do_nway(struct net_device *dev)
 	struct tulip_private *tp = netdev_priv(dev);
 	void __iomem *ioaddr = tp->base_addr;
 	u32 phy_reg = ioread32(ioaddr + 0xB8);
-	u32 new_csr6 = tp->csr6 & ~0x40C40200;
+	u32 new_csr6;
 
 	if (phy_reg & 0x78000000) { /* Ignore baseT4 */
 		if (phy_reg & 0x20000000)		dev->if_port = 5;

I can't say I see what you mean, it's not set in some cases:

			if (tp->medialock) {
			} else if (tp->nwayset  &&  (dev->if_port & 1)) {
				next_tick = 1*HZ;
			} else if (dev->if_port == 0) {
				dev->if_port = 3;
				iowrite32(0x33, ioaddr + CSR12);
				new_csr6 = 0x01860000;
				iowrite32(0x1F868, ioaddr + 0xB8);
			} else {
				dev->if_port = 0;
				iowrite32(0x32, ioaddr + CSR12);
				new_csr6 = 0x00420000;
				iowrite32(0x1F078, ioaddr + 0xB8);
			}
			if (tp->csr6 != new_csr6) {
				tp->csr6 = new_csr6;
Quoted 2 lines

That said clang doesn't complain so maybe I'm missing something static analysis had figured out about this code.

You're looking at the wrong function. This is pnic_do_nway() and you're looking at pnic_timer().

Of course, Colin's patch assumes the current behavior is correct... I guess the current behavior can't be that terrible since it predates git and no one has complained.

drivers/net/ethernet/dec/tulip/pnic.c

    19        void pnic_do_nway(struct net_device *dev)
    20        {
    21                struct tulip_private *tp = netdev_priv(dev);
    22                void __iomem *ioaddr = tp->base_addr;
    23                u32 phy_reg = ioread32(ioaddr + 0xB8);
    24                u32 new_csr6 = tp->csr6 & ~0x40C40200;
                      ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

    25
    26                if (phy_reg & 0x78000000) { /* Ignore baseT4 */
    27                        if (phy_reg & 0x20000000)                dev->if_port = 5;
    28                        else if (phy_reg & 0x40000000)        dev->if_port = 3;
    29                        else if (phy_reg & 0x10000000)        dev->if_port = 4;
    30                        else if (phy_reg & 0x08000000)        dev->if_port = 0;
    31                        tp->nwayset = 1;
    32                        new_csr6 = (dev->if_port & 1) ? 0x01860000 : 0x00420000;
                              ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

    33                        iowrite32(0x32 | (dev->if_port & 1), ioaddr + CSR12);
    34                        if (dev->if_port & 1)
    35                                iowrite32(0x1F868, ioaddr + 0xB8);
    36                        if (phy_reg & 0x30000000) {
    37                                tp->full_duplex = 1;
    38                                new_csr6 |= 0x00000200;
    39                        }
    40                        if (tulip_debug > 1)
    41                                netdev_dbg(dev, "PNIC autonegotiated status %08x, %s\n",
    42                                           phy_reg, medianame[dev->if_port]);
    43                        if (tp->csr6 != new_csr6) {
    44                                tp->csr6 = new_csr6;
    45                                /* Restart Tx */
    46                                tulip_restart_rxtx(tp);
    47                                netif_trans_update(dev);
    48                        }
    49                }
    50        }

regards,
dan carpenter

maintainer
#3 lore raw
Quoted 2 lines · On Tue, 25 Jan 2022 17:14:01 +0300 Dan Carpenter wrote:

You're looking at the wrong function. This is pnic_do_nway() and you're looking at pnic_timer().

Ah, that explains it! Thanks, applied now.

Quoted 3 lines

Of course, Colin's patch assumes the current behavior is correct... I guess the current behavior can't be that terrible since it predates git and no one has complained.

Entirely possible this driver was never used in the git era.