video: hyperv_fb: Fix validation of screen resolution
PATCH 1/1 video: hyperv_fb: Fix validation of screen resolution
In the WIN10 version of the Synthetic Video protocol with Hyper-V, Hyper-V reports a list of supported resolutions as part of the protocol negotiation. The driver calculates the maximum width and height from the list of resolutions, and uses those maximums to validate any screen resolution specified in the video= option on the kernel boot line.
This method of validation is incorrect. For example, the list of supported resolutions could contain 1600x1200 and 1920x1080, both of which fit in an 8 Mbyte frame buffer. But calculating the max width and height yields 1920 and 1200, and 1920x1200 resolution does not fit in an 8 Mbyte frame buffer. Unfortunately, this resolution is accepted, causing a kernel fault when the driver accesses memory outside the frame buffer.
Instead, validate the specified screen resolution by calculating its size, and comparing against the frame buffer size. Delete the code for calculating the max width and height from the list of resolutions, since these max values have no use. Also add the frame buffer size to the info message to aid in understanding why a resolution might be rejected.
--- drivers/video/fbdev/hyperv_fb.c | 16 +++------------- 1 file changed, 3 insertions(+), 13 deletions(-)
drivers/video/fbdev/hyperv_fb.c +3 -13
@@ -287,8 +287,6 @@ struct hvfb_par {static uint screen_width =HVFB_WIDTH ;static uint screen_height =HVFB_HEIGHT ; -static uint screen_width_max =HVFB_WIDTH ; -static uint screen_height_max =HVFB_HEIGHT ;static uint screen_depth;static uint screen_fb_size;static uint dio_fb_size;/* FB size for deferred IO */
@@ -582,7 +580,6 @@ static int synthvid_get_supported_resolution(struct hv_device *hdev)int ret =0 ;unsigned long t;u8 index; -int i;memset (msg,0 ,sizeof (struct synthvid_msg )); msg->vid_hdr.type =SYNTHVID_RESOLUTION_REQUEST ;
@@ -613,13 +610,6 @@ static int synthvid_get_supported_resolution(struct hv_device *hdev) goto out; } -for (i =0 ; i < msg->resolution_resp.resolution_count; i++) { - screen_width_max = max_t(unsigned int, screen_width_max, - msg->resolution_resp.supported_resolution[i].width); - screen_height_max = max_t(unsigned int, screen_height_max, - msg->resolution_resp.supported_resolution[i].height); - } - screen_width = msg->resolution_resp.supported_resolution[index].width; screen_height =
@@ -941,7 +931,7 @@ static void hvfb_get_option(struct fb_info *info) if (x < HVFB_WIDTH_MIN || y < HVFB_HEIGHT_MIN || (synthvid_ver_ge(par->synthvid_version, SYNTHVID_VERSION_WIN10) && - (x > screen_width_max || y > screen_height_max)) || + (x * y * screen_depth / 8 > screen_fb_size)) || (par->synthvid_version == SYNTHVID_VERSION_WIN8 && x * y * screen_depth / 8 > SYNTHVID_FB_SIZE_WIN8) || (par->synthvid_version == SYNTHVID_VERSION_WIN7 &&
@@ -1194,8 +1184,8 @@ static int hvfb_probe(struct hv_device *hdev, }hvfb_get_option (info); -pr_info ("Screen resolution: %dx%d, Color depth: %d\n" , - screen_width, screen_height, screen_depth); +pr_info ("Screen resolution: %dx%d, Color depth: %d, Frame buffer size: %d\n" , + screen_width, screen_height, screen_depth, screen_fb_size); ret =hvfb_getmem (hdev, info);if (ret) {
Signature · 1 line
1.8.3.1
Quoted 86 lines
-----Original Message-----
From: Michael Kelley (LINUX) <[email protected]>
Sent: Sunday, January 16, 2022 2:19 PM
To: KY Srinivasan <[email protected]>; Haiyang Zhang <[email protected]>; Stephen Hemminger <[email protected]>; [email protected]; Wei Hu <[email protected]>; Dexuan Cui <[email protected]>; [email protected]; hhei <[email protected]>; linux- [email protected]; [email protected]; [email protected]; dri- [email protected]
Cc: Michael Kelley (LINUX) <[email protected]>
Subject: [PATCH 1/1] video:hyperv_fb: Fix validation of screen resolutionIn the WIN10 version of the Synthetic Video protocol with Hyper-V, Hyper-V reports a list of supported resolutions as part of the protocol negotiation. The driver calculates the maximum width and height from the list of resolutions, and uses those maximums to validate any screen resolution specified in the video= option on the kernel boot line.
This method of validation is incorrect. For example, the list of supported resolutions could contain 1600x1200 and 1920x1080, both of which fit in an 8 Mbyte frame buffer. But calculating the max width and height yields 1920 and 1200, and 1920x1200 resolution does not fit in an 8 Mbyte frame buffer. Unfortunately, this resolution is accepted, causing a kernel fault when the driver accesses memory outside the frame buffer.
Instead, validate the specified screen resolution by calculating its size, and comparing against the frame buffer size. Delete the code for calculating the max width and height from the list of resolutions, since these max values have no use. Also add the frame buffer size to the info message to aid in understanding why a resolution might be rejected.
Fixes 67e7cdb4829d ("video: hyperv: hyperv_fb: Obtain screen resolution from Hyper-Vhost")
Signed-off-by Michael Kelley <[email protected]>--- drivers/video/fbdev/hyperv_fb.c | 16 +++------------- 1 file changed, 3 insertions(+), 13 deletions(-)drivers/video/fbdev/hyperv_fb.c +1
-11@@ -287,8 +287,6 @@ struct hvfb_par {static uint screen_width =HVFB_WIDTH ;static uint screen_height =HVFB_HEIGHT ; -static uint screen_width_max =HVFB_WIDTH ; -static uint screen_height_max =HVFB_HEIGHT ;static uint screen_depth;static uint screen_fb_size;static uint dio_fb_size;/* FB size for deferred IO */ @@ -582,7 +580,6 @@ static int synthvid_get_supported_resolution(struct hv_device *hdev)int ret =0 ;unsigned long t;u8 index; -int i;memset (msg,0 ,sizeof (struct synthvid_msg )); msg->vid_hdr.type =SYNTHVID_RESOLUTION_REQUEST ;@@ -613,13 +610,6 @@ static int synthvid_get_supported_resolution(struct hv_device *hdev) goto out; } -for (i =0 ; i < msg->resolution_resp.resolution_count; i++) { - screen_width_max = max_t(unsigned int, screen_width_max, - msg->resolution_resp.supported_resolution[i].width); - screen_height_max = max_t(unsigned int, screen_height_max, - msg->resolution_resp.supported_resolution[i].height); - } - screen_width = msg->resolution_resp.supported_resolution[index].width; screen_height =@@ -941,7 +931,7 @@ static void hvfb_get_option(struct fb_info *info) if (x < HVFB_WIDTH_MIN || y < HVFB_HEIGHT_MIN || (synthvid_ver_ge(par->synthvid_version, SYNTHVID_VERSION_WIN10) && - (x > screen_width_max || y > screen_height_max)) || + (x * y * screen_depth / 8 > screen_fb_size)) || (par->synthvid_version == SYNTHVID_VERSION_WIN8 && x * y * screen_depth / 8 > SYNTHVID_FB_SIZE_WIN8) || (par->synthvid_version == SYNTHVID_VERSION_WIN7 &&
drivers/video/fbdev/hyperv_fb.c static int hvfb_probe(struct hv_device *hdev, · line 1191
Quoted 10 lines
drivers/video/fbdev/hyperv_fb.c +2
-2@@ -1194,8 +1184,8 @@ static int hvfb_probe(struct hv_device *hdev, }hvfb_get_option (info); -pr_info ("Screen resolution: %dx%d, Color depth: %d\n" , - screen_width, screen_height, screen_depth); +pr_info ("Screen resolution: %dx%d, Color depth: %d, Frame buffer size: %d\n" , + screen_width, screen_height, screen_depth, screen_fb_size); ret =hvfb_getmem (hdev, info);if (ret) {
Thank you!
Quoted 37 lines · Haiyang Zhang
Quoted 37 lines
-----Original Message-----
From: Michael Kelley (LINUX) <[email protected]>
Sent: Sunday, January 16, 2022 2:19 PM
To: KY Srinivasan <[email protected]>; Haiyang Zhang <[email protected]>; Stephen Hemminger <[email protected]>; [email protected]; Wei Hu <[email protected]>; Dexuan Cui <[email protected]>; [email protected]; hhei <[email protected]>; linux- [email protected]; [email protected]; [email protected]; dri- [email protected]
Cc: Michael Kelley (LINUX) <[email protected]>
Subject: [PATCH 1/1] video:hyperv_fb: Fix validation of screen resolutionIn the WIN10 version of the Synthetic Video protocol with Hyper-V, Hyper-V reports a list of supported resolutions as part of the protocol negotiation. The driver calculates the maximum width and height from the list of resolutions, and uses those maximums to validate any screen resolution specified in the video= option on the kernel boot line.
This method of validation is incorrect. For example, the list of supported resolutions could contain 1600x1200 and 1920x1080, both of which fit in an 8 Mbyte frame buffer. But calculating the max width and height yields 1920 and 1200, and 1920x1200 resolution does not fit in an 8 Mbyte frame buffer. Unfortunately, this resolution is accepted, causing a kernel fault when the driver accesses memory outside the frame buffer.
Instead, validate the specified screen resolution by calculating its size, and comparing against the frame buffer size. Delete the code for calculating the max width and height from the list of resolutions, since these max values have no use. Also add the frame buffer size to the info message to aid in understanding why a resolution might be rejected.
Fixes 67e7cdb4829d ("video: hyperv: hyperv_fb: Obtain screen resolution from Hyper-Vhost")
Signed-off-by Michael Kelley <[email protected]>
[...]
Quoted 3 lines
Reviewed-by Haiyang Zhang <[email protected]>
Applied to hyperv-fixes. Thanks.
From: Wei Liu <[email protected]> Sent: Sunday, January 23, 2022 1:56 PM
Quoted 43 lines · Haiyang Zhang
Quoted 6 lines
Quoted 6 lines
-----Original Message-----
From: Michael Kelley (LINUX) <[email protected]>
Sent: Sunday, January 16, 2022 2:19 PM
To: KY Srinivasan <[email protected]>; Haiyang Zhang<[email protected]>; Stephen
Quoted 1 line
Quoted 1 line
Hemminger <[email protected]>; [email protected]; Wei Hu
<[email protected]>; Dexuan
Quoted 1 line
Quoted 1 line
Cui <[email protected]>; [email protected]; hhei <[email protected]>;
linux-
Quoted 1 line
Quoted 1 line
[email protected]; [email protected]; linux-
[email protected]; dri-
Quoted 25 lines
Quoted 25 lines
[email protected]
Cc: Michael Kelley (LINUX) <[email protected]>
Subject: [PATCH 1/1] video:hyperv_fb: Fix validation of screen resolutionIn the WIN10 version of the Synthetic Video protocol with Hyper-V, Hyper-V reports a list of supported resolutions as part of the protocol negotiation. The driver calculates the maximum width and height from the list of resolutions, and uses those maximums to validate any screen resolution specified in the video= option on the kernel boot line.
This method of validation is incorrect. For example, the list of supported resolutions could contain 1600x1200 and 1920x1080, both of which fit in an 8 Mbyte frame buffer. But calculating the max width and height yields 1920 and 1200, and 1920x1200 resolution does not fit in an 8 Mbyte frame buffer. Unfortunately, this resolution is accepted, causing a kernel fault when the driver accesses memory outside the frame buffer.
Instead, validate the specified screen resolution by calculating its size, and comparing against the frame buffer size. Delete the code for calculating the max width and height from the list of resolutions, since these max values have no use. Also add the frame buffer size to the info message to aid in understanding why a resolution might be rejected.
Quoted 3 lines
Quoted 3 lines
Fixes 67e7cdb4829d ("video: hyperv: hyperv_fb: Obtain screen resolution from Hyper-Vhost")
Signed-off-by Michael Kelley <[email protected]>
Quoted 6 lines
[...]
Quoted 3 lines
Reviewed-by Haiyang Zhang <[email protected]>Applied to hyperv-fixes. Thanks.
This fix got pulled into the fbdev/for-next tree by a new maintainer, Helge Deller.
See https://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev.git/commit/?h=for-next&id=bcc48f8d980b12e66a3d59dfa1041667db971d86
Michael
Wei Liu
maintainerQuoted 46 lines · Michael Kelley (LINUX)
From: Wei Liu <[email protected]> Sent: Sunday, January 23, 2022 1:56 PM
Quoted 45 lines · Haiyang Zhang
Quoted 6 lines
Quoted 6 lines
-----Original Message-----
From: Michael Kelley (LINUX) <[email protected]>
Sent: Sunday, January 16, 2022 2:19 PM
To: KY Srinivasan <[email protected]>; Haiyang Zhang<[email protected]>; Stephen
Quoted 1 line
Quoted 1 line
Hemminger <[email protected]>; [email protected]; Wei Hu
<[email protected]>; Dexuan
Quoted 1 line
Quoted 1 line
Cui <[email protected]>; [email protected]; hhei <[email protected]>;
linux-
Quoted 1 line
Quoted 1 line
[email protected]; [email protected]; linux-
[email protected]; dri-
Quoted 28 lines
Quoted 28 lines
[email protected]
Cc: Michael Kelley (LINUX) <[email protected]>
Subject: [PATCH 1/1] video:hyperv_fb: Fix validation of screen resolutionIn the WIN10 version of the Synthetic Video protocol with Hyper-V, Hyper-V reports a list of supported resolutions as part of the protocol negotiation. The driver calculates the maximum width and height from the list of resolutions, and uses those maximums to validate any screen resolution specified in the video= option on the kernel boot line.
This method of validation is incorrect. For example, the list of supported resolutions could contain 1600x1200 and 1920x1080, both of which fit in an 8 Mbyte frame buffer. But calculating the max width and height yields 1920 and 1200, and 1920x1200 resolution does not fit in an 8 Mbyte frame buffer. Unfortunately, this resolution is accepted, causing a kernel fault when the driver accesses memory outside the frame buffer.
Instead, validate the specified screen resolution by calculating its size, and comparing against the frame buffer size. Delete the code for calculating the max width and height from the list of resolutions, since these max values have no use. Also add the frame buffer size to the info message to aid in understanding why a resolution might be rejected.
Fixes 67e7cdb4829d ("video: hyperv: hyperv_fb: Obtain screen resolution from Hyper-Vhost")
Signed-off-by Michael Kelley <[email protected]>[...]
Quoted 1 line
Quoted 7 lines
Quoted 4 lines
Quoted 2 lines
Reviewed-by Haiyang Zhang <[email protected]>Applied to hyperv-fixes. Thanks.
This fix got pulled into the fbdev/for-next tree by a new maintainer, Helge Deller.
See https://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev.git/commit/?h=for-next&id=bcc48f8d980b12e66a3d59dfa1041667db971d86
OK. I will drop it from hyperv-fixes. Thanks for letting me know!
Quoted 2 lines
Michael
Helge Deller
maintainerQuoted 50 lines · Wei Liu
Quoted 49 lines · Michael Kelley (LINUX)
From: Wei Liu <[email protected]> Sent: Sunday, January 23, 2022 1:56 PM
Quoted 48 lines · Haiyang Zhang
Quoted 6 lines
Quoted 6 lines
-----Original Message-----
From: Michael Kelley (LINUX) <[email protected]>
Sent: Sunday, January 16, 2022 2:19 PM
To: KY Srinivasan <[email protected]>; Haiyang Zhang<[email protected]>; Stephen
Quoted 1 line
Quoted 1 line
Hemminger <[email protected]>; [email protected]; Wei Hu
<[email protected]>; Dexuan
Quoted 1 line
Quoted 1 line
Cui <[email protected]>; [email protected]; hhei <[email protected]>;
linux-
Quoted 1 line
Quoted 1 line
[email protected]; [email protected]; linux-
[email protected]; dri-
Quoted 28 lines
Quoted 28 lines
[email protected]
Cc: Michael Kelley (LINUX) <[email protected]>
Subject: [PATCH 1/1] video:hyperv_fb: Fix validation of screen resolutionIn the WIN10 version of the Synthetic Video protocol with Hyper-V, Hyper-V reports a list of supported resolutions as part of the protocol negotiation. The driver calculates the maximum width and height from the list of resolutions, and uses those maximums to validate any screen resolution specified in the video= option on the kernel boot line.
This method of validation is incorrect. For example, the list of supported resolutions could contain 1600x1200 and 1920x1080, both of which fit in an 8 Mbyte frame buffer. But calculating the max width and height yields 1920 and 1200, and 1920x1200 resolution does not fit in an 8 Mbyte frame buffer. Unfortunately, this resolution is accepted, causing a kernel fault when the driver accesses memory outside the frame buffer.
Instead, validate the specified screen resolution by calculating its size, and comparing against the frame buffer size. Delete the code for calculating the max width and height from the list of resolutions, since these max values have no use. Also add the frame buffer size to the info message to aid in understanding why a resolution might be rejected.
Fixes 67e7cdb4829d ("video: hyperv: hyperv_fb: Obtain screen resolution from Hyper-Vhost")
Signed-off-by Michael Kelley <[email protected]>[...]
Quoted 3 lines
Reviewed-by Haiyang Zhang <[email protected]>
Quoted 6 lines
Quoted 4 lines
Quoted 1 line
Applied to hyperv-fixes. Thanks.
This fix got pulled into the fbdev/for-next tree by a new maintainer, Helge Deller.
See https://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev.git/commit/?h=for-next&id=bcc48f8d980b12e66a3d59dfa1041667db971d86OK. I will drop it from hyperv-fixes. Thanks for letting me know!
Linus hasn't pulled my tree yet, and he will probably not before the next merge window. So, if this is an urgent bugfix for you, I can offer to drop it from the fbdev tree and that you take it through the hyperv-fixes tree. In that case you may add an Acked-by: Helge Deller <[email protected]>. Just let me know what you prefer.
Helge
Wei Liu
maintainerQuoted 56 lines · Helge Deller
Quoted 55 lines · Wei Liu
Quoted 53 lines · Michael Kelley (LINUX)
From: Wei Liu <[email protected]> Sent: Sunday, January 23, 2022 1:56 PM
Quoted 43 lines · Haiyang Zhang
Quoted 6 lines
Quoted 6 lines
-----Original Message-----
From: Michael Kelley (LINUX) <[email protected]>
Sent: Sunday, January 16, 2022 2:19 PM
To: KY Srinivasan <[email protected]>; Haiyang Zhang<[email protected]>; Stephen
Quoted 1 line
Quoted 1 line
Hemminger <[email protected]>; [email protected]; Wei Hu
<[email protected]>; Dexuan
Quoted 1 line
Quoted 1 line
Cui <[email protected]>; [email protected]; hhei <[email protected]>;
linux-
Quoted 1 line
Quoted 1 line
[email protected]; [email protected]; linux-
[email protected]; dri-
Quoted 25 lines
Quoted 25 lines
[email protected]
Cc: Michael Kelley (LINUX) <[email protected]>
Subject: [PATCH 1/1] video:hyperv_fb: Fix validation of screen resolutionIn the WIN10 version of the Synthetic Video protocol with Hyper-V, Hyper-V reports a list of supported resolutions as part of the protocol negotiation. The driver calculates the maximum width and height from the list of resolutions, and uses those maximums to validate any screen resolution specified in the video= option on the kernel boot line.
This method of validation is incorrect. For example, the list of supported resolutions could contain 1600x1200 and 1920x1080, both of which fit in an 8 Mbyte frame buffer. But calculating the max width and height yields 1920 and 1200, and 1920x1200 resolution does not fit in an 8 Mbyte frame buffer. Unfortunately, this resolution is accepted, causing a kernel fault when the driver accesses memory outside the frame buffer.
Instead, validate the specified screen resolution by calculating its size, and comparing against the frame buffer size. Delete the code for calculating the max width and height from the list of resolutions, since these max values have no use. Also add the frame buffer size to the info message to aid in understanding why a resolution might be rejected.
Quoted 3 lines
Quoted 3 lines
Fixes 67e7cdb4829d ("video: hyperv: hyperv_fb: Obtain screen resolution from Hyper-Vhost")
Signed-off-by Michael Kelley <[email protected]>Quoted 6 lines
[...]
Quoted 3 lines
Reviewed-by Haiyang Zhang <[email protected]>Applied to hyperv-fixes. Thanks.
This fix got pulled into the fbdev/for-next tree by a new maintainer, Helge Deller.
See https://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev.git/commit/?h=for-next&id=bcc48f8d980b12e66a3d59dfa1041667db971d86
Quoted 7 lines
Quoted 1 line
OK. I will drop it from hyperv-fixes. Thanks for letting me know!
Linus hasn't pulled my tree yet, and he will probably not before the next merge window. So, if this is an urgent bugfix for you, I can offer to drop it from the fbdev tree and that you take it through the hyperv-fixes tree. In that case you may add an Acked-by: Helge Deller <[email protected]>. Just let me know what you prefer.
Hi Helge
Yes, I would like to upstream it as soon as possible so that it can propagate to stable trees and be backported by downstream vendors.
I will pick it up in hyperv-fixes. Please drop it from your for-next tree.
Thanks,
Wei.
Quoted 2 lines
Helge
Helge Deller
maintainerQuoted 65 lines · Wei Liu
Quoted 56 lines · Helge Deller
Quoted 55 lines · Wei Liu
Quoted 53 lines · Michael Kelley (LINUX)
From: Wei Liu <[email protected]> Sent: Sunday, January 23, 2022 1:56 PM
Quoted 43 lines · Haiyang Zhang
Quoted 6 lines
Quoted 6 lines
-----Original Message-----
From: Michael Kelley (LINUX) <[email protected]>
Sent: Sunday, January 16, 2022 2:19 PM
To: KY Srinivasan <[email protected]>; Haiyang Zhang<[email protected]>; Stephen
Quoted 1 line
Quoted 1 line
Hemminger <[email protected]>; [email protected]; Wei Hu
<[email protected]>; Dexuan
Quoted 1 line
Quoted 1 line
Cui <[email protected]>; [email protected]; hhei <[email protected]>;
linux-
Quoted 1 line
Quoted 1 line
[email protected]; [email protected]; linux-
[email protected]; dri-
Quoted 25 lines
Quoted 25 lines
[email protected]
Cc: Michael Kelley (LINUX) <[email protected]>
Subject: [PATCH 1/1] video:hyperv_fb: Fix validation of screen resolutionIn the WIN10 version of the Synthetic Video protocol with Hyper-V, Hyper-V reports a list of supported resolutions as part of the protocol negotiation. The driver calculates the maximum width and height from the list of resolutions, and uses those maximums to validate any screen resolution specified in the video= option on the kernel boot line.
This method of validation is incorrect. For example, the list of supported resolutions could contain 1600x1200 and 1920x1080, both of which fit in an 8 Mbyte frame buffer. But calculating the max width and height yields 1920 and 1200, and 1920x1200 resolution does not fit in an 8 Mbyte frame buffer. Unfortunately, this resolution is accepted, causing a kernel fault when the driver accesses memory outside the frame buffer.
Instead, validate the specified screen resolution by calculating its size, and comparing against the frame buffer size. Delete the code for calculating the max width and height from the list of resolutions, since these max values have no use. Also add the frame buffer size to the info message to aid in understanding why a resolution might be rejected.
Quoted 3 lines
Quoted 3 lines
Fixes 67e7cdb4829d ("video: hyperv: hyperv_fb: Obtain screen resolution from Hyper-Vhost")
Signed-off-by Michael Kelley <[email protected]>Quoted 6 lines
[...]
Quoted 3 lines
Reviewed-by Haiyang Zhang <[email protected]>Applied to hyperv-fixes. Thanks.
This fix got pulled into the fbdev/for-next tree by a new maintainer, Helge Deller.
See https://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev.git/commit/?h=for-next&id=bcc48f8d980b12e66a3d59dfa1041667db971d86Quoted 7 lines
Quoted 1 line
OK. I will drop it from hyperv-fixes. Thanks for letting me know!
Linus hasn't pulled my tree yet, and he will probably not before the next merge window. So, if this is an urgent bugfix for you, I can offer to drop it from the fbdev tree and that you take it through the hyperv-fixes tree. In that case you may add an Acked-by: Helge Deller <[email protected]>. Just let me know what you prefer.
Quoted 7 lines
Hi Helge
Yes, I would like to upstream it as soon as possible so that it can propagate to stable trees and be backported by downstream vendors.
I will pick it up in hyperv-fixes. Please drop it from your for-next tree.
Dropped now from fbdev tree.
Thanks!
Helge
Wei Liu
maintainerQuoted 1 line · Helge Deller
On 1/24/22 14:31, Wei Liu wrote:
[...]
Quoted 9 lines
Quoted 9 lines
Quoted 6 lines
Linus hasn't pulled my tree yet, and he will probably not before the next merge window. So, if this is an urgent bugfix for you, I can offer to drop it from the fbdev tree and that you take it through the hyperv-fixes tree. In that case you may add an Acked-by: Helge Deller <[email protected]>. Just let me know what you prefer.
Hi Helge
Quoted 7 lines
Quoted 5 lines
Yes, I would like to upstream it as soon as possible so that it can propagate to stable trees and be backported by downstream vendors.
I will pick it up in hyperv-fixes. Please drop it from your for-next tree.
Dropped now from fbdev tree.
Thanks! I added your ack and pushed the patch to hyperv-fixes.
Wei.
Quoted 3 lines
Thanks!
Helge