Skip to contentSkip to conversation

Correct timing report

PATCH Superseded Jammy Huang 1 participant 5 messages Jan 24, 2022

Subsystems (2)

v3 of 4 Superseded Latest is v4 →

lore
Share & tools
lore
#0 lore raw

v3 cover Correct timing report

This series will correct the value of timing detected.

Changes in v3:
- Add API, aspeed_video_get_timings(), for the calculation of timings
- Use active rather than 'total/2' as critera for sync polarity workaround
Changes in v2:
- code refined to improve readability

Jammy Huang (4):
media: aspeed: Correct value for h-total-pixels
media: aspeed: Use FIELD_GET to improve readability
media: aspeed: Correct values for detected timing
media: aspeed: Fix timing polarity incorrect

 drivers/media/platform/aspeed-video.c | 139 ++++++++++++++++++++------
 1 file changed, 111 insertions(+), 28 deletions(-)
Signature · 1 line
2.25.1
#1 lore raw

PATCH v3 1/4 media: aspeed: Correct value for h-total-pixels

Previous reg-field, 0x98[11:0], stands for the period of the detected hsync signal.
Use the correct reg, 0xa0, to get h-total in pixels.

Fixes d2b4387f3bdf ("media: platform: Add Aspeed Video Engine driver")

---
v3:
- no update
v2:
- no update

---
 drivers/media/platform/aspeed-video.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)
drivers/media/platform/aspeed-video.c +6 -3
index b388bc56ce81..d5f77b205175 100644
@@ -166,7 +166,7 @@
 #define  VE_SRC_TB_EDGE_DET_BOT		GENMASK(28, VE_SRC_TB_EDGE_DET_BOT_SHF)
 
 #define VE_MODE_DETECT_STATUS		0x098
-#define  VE_MODE_DETECT_H_PIXELS	GENMASK(11, 0)
+#define  VE_MODE_DETECT_H_PERIOD	GENMASK(11, 0)
 #define  VE_MODE_DETECT_V_LINES_SHF	16
 #define  VE_MODE_DETECT_V_LINES		GENMASK(27, VE_MODE_DETECT_V_LINES_SHF)
 #define  VE_MODE_DETECT_STATUS_VSYNC	BIT(28)
@@ -177,6 +177,8 @@
 #define  VE_SYNC_STATUS_VSYNC_SHF	16
 #define  VE_SYNC_STATUS_VSYNC		GENMASK(27, VE_SYNC_STATUS_VSYNC_SHF)
 
+#define VE_H_TOTAL_PIXELS		0x0A0
+
 #define VE_INTERRUPT_CTRL		0x304
 #define VE_INTERRUPT_STATUS		0x308
 #define  VE_INTERRUPT_MODE_DETECT_WD	BIT(0)
@@ -938,6 +940,7 @@ static void aspeed_video_get_resolution(struct aspeed_video *video)
 	u32 src_lr_edge;
 	u32 src_tb_edge;
 	u32 sync;
+	u32 htotal;
 	struct v4l2_bt_timings *det = &video->detected_timings;
 
 	det->width = MIN_WIDTH;
@@ -983,6 +986,7 @@ static void aspeed_video_get_resolution(struct aspeed_video *video)
 		src_tb_edge = aspeed_video_read(video, VE_SRC_TB_EDGE_DET);
 		mds = aspeed_video_read(video, VE_MODE_DETECT_STATUS);
 		sync = aspeed_video_read(video, VE_SYNC_STATUS);
+		htotal = aspeed_video_read(video, VE_H_TOTAL_PIXELS);
 
 		video->frame_bottom = (src_tb_edge & VE_SRC_TB_EDGE_DET_BOT) >>
 			VE_SRC_TB_EDGE_DET_BOT_SHF;
@@ -999,8 +1003,7 @@ static void aspeed_video_get_resolution(struct aspeed_video *video)
 			VE_SRC_LR_EDGE_DET_RT_SHF;
 		video->frame_left = src_lr_edge & VE_SRC_LR_EDGE_DET_LEFT;
 		det->hfrontporch = video->frame_left;
-		det->hbackporch = (mds & VE_MODE_DETECT_H_PIXELS) -
-			video->frame_right;
+		det->hbackporch = htotal - video->frame_right;
 		det->hsync = sync & VE_SYNC_STATUS_HSYNC;
 		if (video->frame_left > video->frame_right)
 			continue;
Signature · 1 line
2.25.1
#2 lore raw

PATCH v3 2/4 media: aspeed: Use FIELD_GET to improve readability

In reply to Jammy Huang

Use the bitfield macro FIELD_GET, and GENMASK to do the shift and mask in one go for reg values.

---
v3:
- no update
v2:
- Put some codes on one line

---
 drivers/media/platform/aspeed-video.c | 31 +++++++++++----------------
 1 file changed, 12 insertions(+), 19 deletions(-)
drivers/media/platform/aspeed-video.c +12 -19
index d5f77b205175..c241038ee27c 100644
@@ -156,26 +156,22 @@
 #define  VE_SRC_LR_EDGE_DET_NO_H	BIT(13)
 #define  VE_SRC_LR_EDGE_DET_NO_DISP	BIT(14)
 #define  VE_SRC_LR_EDGE_DET_NO_CLK	BIT(15)
-#define  VE_SRC_LR_EDGE_DET_RT_SHF	16
-#define  VE_SRC_LR_EDGE_DET_RT		GENMASK(27, VE_SRC_LR_EDGE_DET_RT_SHF)
+#define  VE_SRC_LR_EDGE_DET_RT		GENMASK(27, 16)
 #define  VE_SRC_LR_EDGE_DET_INTERLACE	BIT(31)
 
 #define VE_SRC_TB_EDGE_DET		0x094
 #define  VE_SRC_TB_EDGE_DET_TOP		GENMASK(12, 0)
-#define  VE_SRC_TB_EDGE_DET_BOT_SHF	16
-#define  VE_SRC_TB_EDGE_DET_BOT		GENMASK(28, VE_SRC_TB_EDGE_DET_BOT_SHF)
+#define  VE_SRC_TB_EDGE_DET_BOT		GENMASK(28, 16)
 
 #define VE_MODE_DETECT_STATUS		0x098
 #define  VE_MODE_DETECT_H_PERIOD	GENMASK(11, 0)
-#define  VE_MODE_DETECT_V_LINES_SHF	16
-#define  VE_MODE_DETECT_V_LINES		GENMASK(27, VE_MODE_DETECT_V_LINES_SHF)
+#define  VE_MODE_DETECT_V_LINES		GENMASK(27, 16)
 #define  VE_MODE_DETECT_STATUS_VSYNC	BIT(28)
 #define  VE_MODE_DETECT_STATUS_HSYNC	BIT(29)
 
 #define VE_SYNC_STATUS			0x09c
 #define  VE_SYNC_STATUS_HSYNC		GENMASK(11, 0)
-#define  VE_SYNC_STATUS_VSYNC_SHF	16
-#define  VE_SYNC_STATUS_VSYNC		GENMASK(27, VE_SYNC_STATUS_VSYNC_SHF)
+#define  VE_SYNC_STATUS_VSYNC		GENMASK(27, 16)
 
 #define VE_H_TOTAL_PIXELS		0x0A0
 
@@ -988,23 +984,20 @@ static void aspeed_video_get_resolution(struct aspeed_video *video)
 		sync = aspeed_video_read(video, VE_SYNC_STATUS);
 		htotal = aspeed_video_read(video, VE_H_TOTAL_PIXELS);
 
-		video->frame_bottom = (src_tb_edge & VE_SRC_TB_EDGE_DET_BOT) >>
-			VE_SRC_TB_EDGE_DET_BOT_SHF;
-		video->frame_top = src_tb_edge & VE_SRC_TB_EDGE_DET_TOP;
+		video->frame_bottom = FIELD_GET(VE_SRC_TB_EDGE_DET_BOT, src_tb_edge);
+		video->frame_top = FIELD_GET(VE_SRC_TB_EDGE_DET_TOP, src_tb_edge);
 		det->vfrontporch = video->frame_top;
-		det->vbackporch = ((mds & VE_MODE_DETECT_V_LINES) >>
-			VE_MODE_DETECT_V_LINES_SHF) - video->frame_bottom;
-		det->vsync = (sync & VE_SYNC_STATUS_VSYNC) >>
-			VE_SYNC_STATUS_VSYNC_SHF;
+		det->vbackporch = FIELD_GET(VE_MODE_DETECT_V_LINES, mds) -
+			video->frame_bottom;
+		det->vsync = FIELD_GET(VE_SYNC_STATUS_VSYNC, sync);
 		if (video->frame_top > video->frame_bottom)
 			continue;
 
-		video->frame_right = (src_lr_edge & VE_SRC_LR_EDGE_DET_RT) >>
-			VE_SRC_LR_EDGE_DET_RT_SHF;
-		video->frame_left = src_lr_edge & VE_SRC_LR_EDGE_DET_LEFT;
+		video->frame_right = FIELD_GET(VE_SRC_LR_EDGE_DET_RT, src_lr_edge);
+		video->frame_left = FIELD_GET(VE_SRC_LR_EDGE_DET_LEFT, src_lr_edge);
 		det->hfrontporch = video->frame_left;
 		det->hbackporch = htotal - video->frame_right;
-		det->hsync = sync & VE_SYNC_STATUS_HSYNC;
+		det->hsync = FIELD_GET(VE_SYNC_STATUS_HSYNC, sync);
 		if (video->frame_left > video->frame_right)
 			continue;
 
Signature · 1 line
2.25.1
#3 lore raw

PATCH v3 3/4 media: aspeed: Correct values for detected timing

In reply to Jammy Huang

Correct timing's fp/sync/bp value based on the information below. It should be noticed that the calculation formula should be changed per sync polarity.

The sequence of signal: sync - backporch - video data - frontporch

The following registers start counting from sync's rising edge:
1. VR090: frame edge's left and right
2. VR094: frame edge's top and bottom
3. VR09C: counting from sync's rising edge to falling edge

[Vertical timing]

            +--+     +-------------------+     +--+
            |  |     |     v i d e o     |     |  |
         +--+  +-----+                   +-----+  +---+
       vsync+--+

frame_top+--------+
frame_bottom+----------------------------+

                  +-------------------+
                  |     v i d e o     |
      +--+  +-----+                   +-----+  +---+
         |  |                               |  |
         +--+                               +--+
       vsync+-------------------------------+

frame_top+-----+
frame_bottom+-------------------------+

[Horizontal timing]

            +--+     +-------------------+     +--+
            |  |     |     v i d e o     |     |  |
         +--+  +-----+                   +-----+  +---+
       hsync+--+

frame_left+--------+
frame_right+----------------------------+

                  +-------------------+
                  |     v i d e o     |
      +--+  +-----+                   +-----+  +---+
         |  |                               |  |
         +--+                               +--+
       hsync+-------------------------------+

frame_left+-----+
frame_right+-------------------------+

---
v3:
- Add API, aspeed_video_get_timings(), to handle the calculation of timings.
v2:
- Code refined per Joel's suggestion
- Update commit message to have name matching variable

---
 drivers/media/platform/aspeed-video.c | 30 ++++++++++++++++++++-------
 1 file changed, 22 insertions(+), 8 deletions(-)
drivers/media/platform/aspeed-video.c +83 -12
index c241038ee27c..7e988cd05161 100644
@@ -925,6 +925,87 @@ static void aspeed_video_calc_compressed_size(struct aspeed_video *video,
 		 video->max_compressed_size);
 }
 
+/*
+ * Update v4l2_bt_timings per current status.
+ * frame_top/frame_bottom/frame_left/frame_right need to be ready.
+ *
+ * The following registers start counting from sync's rising edge:
+ * 1. VR090: frame edge's left and right
+ * 2. VR094: frame edge's top and bottom
+ * 3. VR09C: counting from sync's rising edge to falling edge
+ *
+ * [Vertical timing]
+ *             +--+     +-------------------+     +--+
+ *             |  |     |     v i d e o     |     |  |
+ *          +--+  +-----+                   +-----+  +---+
+ *        vsync+--+
+ *    frame_top+--------+
+ * frame_bottom+----------------------------+
+ *
+ *                   +-------------------+
+ *                   |     v i d e o     |
+ *       +--+  +-----+                   +-----+  +---+
+ *          |  |                               |  |
+ *          +--+                               +--+
+ *        vsync+-------------------------------+
+ *    frame_top+-----+
+ * frame_bottom+-------------------------+
+ *
+ * [Horizontal timing]
+ *             +--+     +-------------------+     +--+
+ *             |  |     |     v i d e o     |     |  |
+ *          +--+  +-----+                   +-----+  +---+
+ *        hsync+--+
+ *   frame_left+--------+
+ *  frame_right+----------------------------+
+ *
+ *                   +-------------------+
+ *                   |     v i d e o     |
+ *       +--+  +-----+                   +-----+  +---+
+ *          |  |                               |  |
+ *          +--+                               +--+
+ *        hsync+-------------------------------+
+ *   frame_left+-----+
+ *  frame_right+-------------------------+
+ *
+ * @v: the struct of aspeed_video
+ * @det: v4l2_bt_timings to be updated.
+ */
+static void aspeed_video_get_timings(struct aspeed_video *v,
+				     struct v4l2_bt_timings *det)
+{
+	u32 mds, sync, htotal, vtotal, vsync, hsync;
+
+	mds = aspeed_video_read(v, VE_MODE_DETECT_STATUS);
+	sync = aspeed_video_read(v, VE_SYNC_STATUS);
+	htotal = aspeed_video_read(v, VE_H_TOTAL_PIXELS);
+	vtotal = FIELD_GET(VE_MODE_DETECT_V_LINES, mds);
+	vsync = FIELD_GET(VE_SYNC_STATUS_VSYNC, sync);
+	hsync = FIELD_GET(VE_SYNC_STATUS_HSYNC, sync);
+
+	if (det->polarities & V4L2_DV_VSYNC_POS_POL) {
+		det->vbackporch = v->frame_top - vsync;
+		det->vfrontporch = vtotal - v->frame_bottom;
+		det->vsync = vsync;
+	} else {
+		det->vbackporch = v->frame_top;
+		det->vfrontporch = vsync - v->frame_bottom;
+		det->vsync = vtotal - vsync;
+	}
+
+	if (det->polarities & V4L2_DV_HSYNC_POS_POL) {
+		det->hbackporch = v->frame_left - hsync;
+		det->hfrontporch = htotal - v->frame_right;
+		det->hsync = hsync;
+	} else {
+		det->hbackporch = v->frame_left;
+		det->hfrontporch = hsync - v->frame_right;
+		det->hsync = htotal - hsync;
+	}
+}
+
 #define res_check(v) test_and_clear_bit(VIDEO_MODE_DETECT_DONE, &(v)->flags)
 
 static void aspeed_video_get_resolution(struct aspeed_video *video)
@@ -935,8 +1016,6 @@ static void aspeed_video_get_resolution(struct aspeed_video *video)
 	u32 mds;
 	u32 src_lr_edge;
 	u32 src_tb_edge;
-	u32 sync;
-	u32 htotal;
 	struct v4l2_bt_timings *det = &video->detected_timings;
 
 	det->width = MIN_WIDTH;
@@ -980,24 +1059,16 @@ static void aspeed_video_get_resolution(struct aspeed_video *video)
 
 		src_lr_edge = aspeed_video_read(video, VE_SRC_LR_EDGE_DET);
 		src_tb_edge = aspeed_video_read(video, VE_SRC_TB_EDGE_DET);
-		mds = aspeed_video_read(video, VE_MODE_DETECT_STATUS);
-		sync = aspeed_video_read(video, VE_SYNC_STATUS);
-		htotal = aspeed_video_read(video, VE_H_TOTAL_PIXELS);
 
 		video->frame_bottom = FIELD_GET(VE_SRC_TB_EDGE_DET_BOT, src_tb_edge);
 		video->frame_top = FIELD_GET(VE_SRC_TB_EDGE_DET_TOP, src_tb_edge);
-		det->vfrontporch = video->frame_top;
-		det->vbackporch = FIELD_GET(VE_MODE_DETECT_V_LINES, mds) -
-			video->frame_bottom;
-		det->vsync = FIELD_GET(VE_SYNC_STATUS_VSYNC, sync);
+
 		if (video->frame_top > video->frame_bottom)
 			continue;
 
 		video->frame_right = FIELD_GET(VE_SRC_LR_EDGE_DET_RT, src_lr_edge);
 		video->frame_left = FIELD_GET(VE_SRC_LR_EDGE_DET_LEFT, src_lr_edge);
-		det->hfrontporch = video->frame_left;
-		det->hbackporch = htotal - video->frame_right;
-		det->hsync = FIELD_GET(VE_SYNC_STATUS_HSYNC, sync);
+
 		if (video->frame_left > video->frame_right)
 			continue;
 
@@ -1013,6 +1084,8 @@ static void aspeed_video_get_resolution(struct aspeed_video *video)
 	det->width = (video->frame_right - video->frame_left) + 1;
 	video->v4l2_input_status = 0;
 
+	aspeed_video_get_timings(video, det);
+
 	/*
 	 * Enable mode-detect watchdog, resolution-change watchdog and
 	 * automatic compression after frame capture.
Signature · 1 line
2.25.1
#4 lore raw

PATCH v3 4/4 media: aspeed: Fix timing polarity incorrect

In reply to Jammy Huang

This is a workaround for polarity detection unstable. Because h/v sync polarity got from VR098 could be wrong, we try to use ast SoC's characteristic to confirm sync polarity.

In ast SoC's design, sync value got by VR09C counts from sync's rising edge, which means sync value = bp + active + fp if negative polarity. Thus, sync value would be larger than de if negative.

Ex. 1920x1200 at 60
VR098: c4d3efff, VR09C: 04cc001f
v-total = 0x4D3 (VR098[27:16]) = 1235
v-sync = 0x4CC (VR09C[27:16]) = 1228

---
v3:
- Use active rather than 'total/2' as critera for workaround
v2:
- Use 'total/2' rather than 'total<<1'
- Update comment

---
 drivers/media/platform/aspeed-video.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)
drivers/media/platform/aspeed-video.c +14 -0
index 7e988cd05161..a135a31b4234 100644
@@ -985,6 +985,20 @@ static void aspeed_video_get_timings(struct aspeed_video *v,
 	vsync = FIELD_GET(VE_SYNC_STATUS_VSYNC, sync);
 	hsync = FIELD_GET(VE_SYNC_STATUS_HSYNC, sync);
 
+	/*
+	 * This is a workaround for polarity detection.
+	 * Because ast-soc counts sync from sync's rising edge, the reg value
+	 * of sync would be larger than video's active area if negative.
+	 */
+	if (vsync > det->height)
+		det->polarities &= ~V4L2_DV_VSYNC_POS_POL;
+	else
+		det->polarities |= V4L2_DV_VSYNC_POS_POL;
+	if (hsync > det->width)
+		det->polarities &= ~V4L2_DV_HSYNC_POS_POL;
+	else
+		det->polarities |= V4L2_DV_HSYNC_POS_POL;
+
 	if (det->polarities & V4L2_DV_VSYNC_POS_POL) {
 		det->vbackporch = v->frame_top - vsync;
 		det->vfrontporch = vtotal - v->frame_bottom;
Signature · 1 line
2.25.1