ARM: dts: exynos: Add support for Samsung Klimt WiFi
Subsystems (3)
cover ARM: dts: exynos: Add support for Samsung Klimt WiFi
Klimt WiFi has product name Samsung Galaxy Tab S 8.4" and was released in 2014. It has similar hardware to exynos5420-chagall-wifi and the two devices can hence share a common base dtsi.
Same issues as for Chagall Wifi applies: CCI has to be disabled and only 4 out of 8 CPUs are brought up at boot (see
https://lore.kernel.org/r/[email protected]).
Henrik Grimler (2):
dt-bindings: arm: samsung: document Klimt WiFi board binding
ARM: dts: Add support for Samsung Klimt WiFi
.../bindings/arm/samsung/samsung-boards.yaml | 1 + arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/exynos5420-klimt-wifi.dts | 75 +++++++++++++++++++ 3 files changed, 77 insertions(+) create mode 100644 arch/arm/boot/dts/exynos5420-klimt-wifi.dts
base-commit: e758cdb29e81cee1d53e1a06bb3db0a32fc8c347
Signature · 1 line
2.34.1
PATCH 1/2 dt-bindings: arm: samsung: document Klimt WiFi board binding
Add binding for Galaxy Tab S 8.4", based on Exynos 5420 with codename klimt-wifi.
--- .../devicetree/bindings/arm/samsung/samsung-boards.yaml | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml +1 -0
@@ -141,6 +141,7 @@ properties: - enum: - insignal,arndale-octa # Insignal Arndale Octa - samsung,chagall-wifi # Samsung SM-T800 + - samsung,klimt-wifi # Samsung SM-T700 - samsung,smdk5420 # Samsung SMDK5420 eval - const: samsung,exynos5420 - const: samsung,exynos5
Signature · 1 line
2.34.1
PATCH 2/2 ARM: dts: exynos: Add support for Samsung Klimt WiFi
In reply to Henrik GrimlerKlimt WiFi has the product name Samsung Galaxy Tab S 8.4". Board is based on Exynos 5420, and has similar hardware to Chagall WiFi, but with a smaller battery, smaller screen and another touchscreen controller.
The device tree added here contains support for:
- UART access through a micro-usb cable with 619 kOhm between ID & GND
- Accessing the internal eMMC storage
- Accessing an external SD card
- USB, after configuration it is possible to ssh into the device through a usb cable
--- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/exynos5420-klimt-wifi.dts | 75 +++++++++++++++++++++ 2 files changed, 76 insertions(+) create mode 100644 arch/arm/boot/dts/exynos5420-klimt-wifi.dts
arch/arm/boot/dts/Makefile +1 -0
@@ -222,6 +222,7 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \ exynos5420-peach-pit.dtb \ exynos5420-smdk5420.dtb \ exynos5420-chagall-wifi.dtb \ + exynos5420-klimt-wifi.dtb \ exynos5422-odroidhc1.dtb \ exynos5422-odroidxu3.dtb \ exynos5422-odroidxu3-lite.dtb \
arch/arm/boot/dts/exynos5420-klimt-wifi.dts new file +75 -0
75 lines not on this page · raw message
Signature · 1 line
2.34.1
Krzysztof Kozlowski
AppliedQuoted 9 lines · Henrik Grimler
Klimt WiFi has product name Samsung Galaxy Tab S 8.4" and was released in 2014. It has similar hardware to exynos5420-chagall-wifi and the two devices can hence share a common base dtsi.
Same issues as for Chagall Wifi applies: CCI has to be disabled and only 4 out of 8 CPUs are brought up at boot (see
https://lore.kernel.org/r/[email protected]).[...]
Applied, thanks!
[1/2] dt-bindings: arm: samsung: document Klimt WiFi board binding
commit: 8d4d0d7c43e6f87df02a0acac206b50c265962d1
[2/2] ARM: dts: exynos: Add support for Samsung Klimt WiFi
commit: 21fc732222559c7b5a8731571d30501d5fcb631cBest regards,
Signature · 6 lines
Krzysztof Kozlowski <[email protected]> _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel