drm/amd/pm: add get_dpm_ultimate_freq function for cyan skillfish
Subsystems (3)
PATCH v3 1/1 drm/amd/pm: add get_dpm_ultimate_freq function for cyan skillfish
Some clients(e.g., kfd) query sclk/mclk through this function. Because cyan skillfish doesn't support dpm. For sclk, set min/max to CYAN_SKILLFISH_SCLK_MIN/CYAN_SKILLFISH_SCLK_MAX(to maintain the existing logic).For others, set both min and max to current value.
Before this patch:
# /opt/rocm/opencl/bin/clinfo
Max clock frequency: 0Mhz
After this patch:
# /opt/rocm/opencl/bin/clinfo
Max clock frequency: 2000Mhz
v2:
- Maintain the existing min/max sclk logic.(Lijo)
v3:
- Avoid fetching metrics table twice.(Lijo)
--- .../amd/pm/swsmu/smu11/cyan_skillfish_ppt.c | 31 +++++++++++++++++++ 1 file changed, 31 insertions(+)
drivers/gpu/drm/amd/pm/swsmu/smu11/cyan_skillfish_ppt.c +31 -0
@@ -552,6 +552,36 @@ static int cyan_skillfish_od_edit_dpm_table(struct smu_context *smu,return ret; } +static int cyan_skillfish_get_dpm_ultimate_freq (struct smu_context *smu, +enum smu_clk_type clk_type, +uint32_t *min, +uint32_t *max) +{ +int ret =0 ; +uint32_t low, high; + +switch (clk_type) { +case SMU_GFXCLK : +case SMU_SCLK : + low =CYAN_SKILLFISH_SCLK_MIN ; + high =CYAN_SKILLFISH_SCLK_MAX ; +break ; +default : + ret =cyan_skillfish_get_current_clk_freq (smu, clk_type, &low); +if (ret) +return ret; + high = low; +break ; + } + +if (min) + *min = low; +if (max) + *max = high; + +return 0 ; +} +static const struct pptable_funcs cyan_skillfish_ppt_funcs = { .check_fw_status = smu_v11_0_check_fw_status,
@@ -565,6 +595,7 @@ static const struct pptable_funcs cyan_skillfish_ppt_funcs = { .is_dpm_running = cyan_skillfish_is_dpm_running, .get_gpu_metrics = cyan_skillfish_get_gpu_metrics, .od_edit_dpm_table = cyan_skillfish_od_edit_dpm_table, + .get_dpm_ultimate_freq = cyan_skillfish_get_dpm_ultimate_freq, .register_irq_handler = smu_v11_0_register_irq_handler, .notify_memory_pool_location = smu_v11_0_notify_memory_pool_location, .send_smc_msg_with_param = smu_cmn_send_smc_msg_with_param,
Signature · 1 line
2.25.1
Quoted 13 lines · Lang Yu
Some
clients(e.g., kfd)query sclk/mclk through this function. Because cyan skillfish doesn't support dpm. For sclk, set min/max to CYAN_SKILLFISH_SCLK_MIN/CYAN_SKILLFISH_SCLK_MAX(to maintain the existing logic).For others, set both min and max to current value.Before this patch:
# /opt/rocm/opencl/bin/clinfoMax clock frequency: 0Mhz
After this patch:
# /opt/rocm/opencl/bin/clinfo
Quoted 8 lines
Max clock frequency: 2000Mhz
v2:
- Maintain the existing min/max sclk logic.(Lijo)
v3:
- Avoid fetching metrics table twice.(Lijo)Signed-off-by Lang Yu <[email protected]>
Thanks,
Lijo
Quoted 54 lines
--- .../amd/pm/swsmu/smu11/cyan_skillfish_ppt.c | 31 +++++++++++++++++++ 1 file changed, 31 insertions(+)drivers/gpu/drm/amd/pm/swsmu/smu11/cyan_skillfish_ppt.c +31
-0@@ -552,6 +552,36 @@ static int cyan_skillfish_od_edit_dpm_table(struct smu_context *smu,return ret; } +static int cyan_skillfish_get_dpm_ultimate_freq (struct smu_context *smu, +enum smu_clk_type clk_type, +uint32_t *min, +uint32_t *max) +{ +int ret =0 ; +uint32_t low, high; + +switch (clk_type) { +case SMU_GFXCLK : +case SMU_SCLK : + low =CYAN_SKILLFISH_SCLK_MIN ; + high =CYAN_SKILLFISH_SCLK_MAX ; +break ; +default : + ret =cyan_skillfish_get_current_clk_freq (smu, clk_type, &low); +if (ret) +return ret; + high = low; +break ; + } + +if (min) + *min = low; +if (max) + *max = high; + +return 0 ; +} +static const struct pptable_funcs cyan_skillfish_ppt_funcs = { .check_fw_status = smu_v11_0_check_fw_status,@@ -565,6 +595,7 @@ static const struct pptable_funcs cyan_skillfish_ppt_funcs = { .is_dpm_running = cyan_skillfish_is_dpm_running, .get_gpu_metrics = cyan_skillfish_get_gpu_metrics, .od_edit_dpm_table = cyan_skillfish_od_edit_dpm_table, + .get_dpm_ultimate_freq = cyan_skillfish_get_dpm_ultimate_freq, .register_irq_handler = smu_v11_0_register_irq_handler, .notify_memory_pool_location = smu_v11_0_notify_memory_pool_location, .send_smc_msg_with_param = smu_cmn_send_smc_msg_with_param,