spi: spidev: prevent spidev->speed_hz from being zero
Subsystems (2)
PATCH 1/1 spi: spidev: prevent spidev->speed_hz from being zero
A zero value for spi->max_speed_hz or spidev->speed_hz does not make sense and trying to set that can lead to divide by zero crashes in a some of the drivers.
drivers/spi/spi-s3c64xx.c:874 s3c64xx_spi_setup() error: potential divide by zero bug '/ spi->max_speed_hz'. drivers/spi/spi-fsl-dspi.c:613 hz_to_spi_baud() error: potential divide by zero bug '/ speed_hz'. drivers/spi/spi-xlp.c:146 xlp_spi_setup() error: potential divide by zero bug '/ (spi->max_speed_hz)'. drivers/spi/spi-orion.c:162 orion_spi_baudrate_set() error: potential divide by zero bug '/ speed'.
---
It's hard to know which Fixes tag to use...
drivers/spi/spidev.c | 31 +++++++++++++++++++------------ 1 file changed, 19 insertions(+), 12 deletions(-)
drivers/spi/spidev.c +19 -12
@@ -453,22 +453,29 @@ spidev_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)dev_dbg (&spi->dev,"%d bits per word\n" , tmp); }break ; -case SPI_IOC_WR_MAX_SPEED_HZ : +case SPI_IOC_WR_MAX_SPEED_HZ : { +u32 save; + retval =get_user (tmp, (__u32 __user *)arg); -if (retval ==0 ) { -u32 save = spi->max_speed_hz; +if (retval) +break ; +if (tmp ==0 ) { + retval = -EINVAL ; +break ; + } - spi->max_speed_hz = tmp; - retval =spi_setup (spi); -if (retval ==0 ) { - spidev->speed_hz = tmp; -dev_dbg (&spi->dev,"%d Hz (max)\n" , - spidev->speed_hz); - } - spi->max_speed_hz = save; + save = spi->max_speed_hz; + + spi->max_speed_hz = tmp; + retval =spi_setup (spi); +if (retval ==0 ) { + spidev->speed_hz = tmp; +dev_dbg (&spi->dev,"%d Hz (max)\n" , spidev->speed_hz); } -break ; + spi->max_speed_hz = save; +break ; + }default :/* segmented and/or full-duplex I/O request */ /* Check message and copy into scratch area */
Signature · 1 line
2.20.1
Mark Brown
maintainerQuoted 10 lines · Dan Carpenter
A zero value for
spi->max_speed_hzorspidev->speed_hzdoes not make sense and trying to set that can lead to divide by zero crashes in a some of the drivers.
drivers/spi/spi-s3c64xx.c:874s3c64xx_spi_setup()error: potential divide by zero bug '/spi->max_speed_hz'.drivers/spi/spi-fsl-dspi.c:613hz_to_spi_baud()error: potential divide by zero bug '/speed_hz'.drivers/spi/spi-xlp.c:146xlp_spi_setup()error: potential divide by zero bug '/ (spi->max_speed_hz)'.drivers/spi/spi-orion.c:162orion_spi_baudrate_set()error: potential divide by zero bug '/ speed'.[...]
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next
Thanks!
[1/1] spi: spidev: prevent spidev->speed_hz from being zero
commit: 833026ad56f76d1a1035d6511fd5aeed308465fd
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark