Skip to contentSkip to conversation

arm: kirkwood: GoFlex Home : Use Marvell uclass mvgbe and PHY driver for Ethernet

PATCH In review Tony Dinh 3 participants 4 messages Jan 26, 2022 – Jan 31, 2022

lore
Share & tools
lore

Tony Dinh

author
#0 lore raw

PATCH 1/1 arm: kirkwood: GoFlex Home : Use Marvell uclass mvgbe and PHY driver for Ethernet

The GoFlex Home board has the network chip Marvell 88E1116R. Use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet.

- Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board.
- Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code.
- Enable CONFIG_PHY_MARVELL to properly configure the network.
- Miscellaneous changes: use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, use BIT macro, and cleanup comments.

---

 board/Seagate/goflexhome/goflexhome.c | 84 ++++-----------------------
 configs/goflexhome_defconfig          |  2 +
 include/configs/goflexhome.h          | 32 +++-------
 3 files changed, 22 insertions(+), 96 deletions(-)
board/Seagate/goflexhome/goflexhome.c +11 -73
index 52be64fb8c..caea89c10e 100644
@@ -1,10 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0+
 /*
- * Copyright (C) 2021
- * Tony Dinh <[email protected]>
- * Suriyan Ramasami <[email protected]>
- *
- * Copyright (C) 2013 Suriyan Ramasami <[email protected]>
+ * Copyright (C) 2021-2022 Tony Dinh <[email protected]>
+ * Copyright (C) 2013-2021 Suriyan Ramasami <[email protected]>
  *
  * Based on dockstar.c originally written by
  * Copyright (C) 2010  Eric C. Cooper <[email protected]>
@@ -18,14 +15,14 @@
 #include <common.h>
 #include <bootstage.h>
 #include <init.h>
-#include <miiphy.h>
-#include <net.h>
+#include <netdev.h>
 #include <asm/global_data.h>
 #include <asm/mach-types.h>
 #include <asm/arch/soc.h>
 #include <asm/arch/mpp.h>
 #include <asm/arch/cpu.h>
 #include <asm/io.h>
+#include <linux/bitops.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -98,6 +95,11 @@ int board_early_init_f(void)
 	return 0;
 }
 
+int board_eth_init(struct bd_info *bis)
+{
+	return cpu_eth_init(bis);
+}
+
 int board_init(void)
 {
 	/*
@@ -111,73 +113,9 @@ int board_init(void)
 	return 0;
 }
 
-static int fdt_get_phy_addr(const char *path)
-{
-	const void *fdt = gd->fdt_blob;
-	const u32 *reg;
-	const u32 *val;
-	int node, phandle, addr;
-
-	/* Find the node by its full path */
-	node = fdt_path_offset(fdt, path);
-	if (node >= 0) {
-		/* Look up phy-handle */
-		val = fdt_getprop(fdt, node, "phy-handle", NULL);
-		if (val) {
-			phandle = fdt32_to_cpu(*val);
-			if (!phandle)
-				return -1;
-			/* Follow it to its node */
-			node = fdt_node_offset_by_phandle(fdt, phandle);
-			if (node) {
-				/* Look up reg */
-				reg = fdt_getprop(fdt, node, "reg", NULL);
-				if (reg) {
-					addr = fdt32_to_cpu(*reg);
-					return addr;
-				}
-			}
-		}
-	}
-	return -1;
-}
-
-#ifdef CONFIG_RESET_PHY_R
-/* Configure and enable MV88E1116 PHY */
-void reset_phy(void)
-{
-	u16 reg;
-	int phyaddr;
-	char *name = "ethernet-controller@72000";
-	char *eth0_path = "/ocp@f1000000/ethernet-controller@72000/ethernet0-port@0";
-
-	if (miiphy_set_current_dev(name))
-		return;
-
-	phyaddr = fdt_get_phy_addr(eth0_path);
-	if (phyaddr < 0)
-		return;
-
-	/*
-	 * Enable RGMII delay on Tx and Rx for CPU port
-	 * Ref: sec 4.7.2 of chip datasheet
-	 */
-	miiphy_write(name, phyaddr, MV88E1116_PGADR_REG, 2);
-	miiphy_read(name, phyaddr, MV88E1116_MAC_CTRL_REG, &reg);
-	reg |= (MV88E1116_RGMII_RXTM_CTRL | MV88E1116_RGMII_TXTM_CTRL);
-	miiphy_write(name, phyaddr, MV88E1116_MAC_CTRL_REG, reg);
-	miiphy_write(name, phyaddr, MV88E1116_PGADR_REG, 0);
-
-	/* reset the phy */
-	miiphy_reset(name, phyaddr);
-
-	printf("88E1116 Initialized on %s\n", name);
-}
-#endif /* CONFIG_RESET_PHY_R */
-
 #if CONFIG_IS_ENABLED(BOOTSTAGE)
-#define GREEN_LED	(1 << 14)
-#define ORANGE_LED	(1 << 15)
+#define GREEN_LED	BIT(14)
+#define ORANGE_LED	BIT(15)
 #define BOTH_LEDS	(GREEN_LED | ORANGE_LED)
 #define NEITHER_LED	0
 
configs/goflexhome_defconfig +2 -0
index ec8b7398d0..e6eb00a938 100644
@@ -2,6 +2,7 @@ CONFIG_ARM=y
 CONFIG_SKIP_LOWLEVEL_INIT=y
 CONFIG_SYS_DCACHE_OFF=y
 CONFIG_ARCH_CPU_INIT=y
+CONFIG_SYS_THUMB_BUILD=y
 CONFIG_ARCH_KIRKWOOD=y
 CONFIG_SYS_KWD_CONFIG="board/Seagate/goflexhome/kwbimage.cfg"
 CONFIG_SYS_TEXT_BASE=0x600000
@@ -47,6 +48,7 @@ CONFIG_SATA_MV=y
 # CONFIG_MMC is not set
 CONFIG_MTD=y
 CONFIG_MTD_RAW_NAND=y
+CONFIG_PHY_MARVELL=y
 CONFIG_DM_ETH=y
 CONFIG_MVGBE=y
 CONFIG_MII=y
include/configs/goflexhome.h +9 -23
index 90e37d9853..c279579268 100644
@@ -1,5 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
+ * Copyright (C) 2022 Tony Dinh <[email protected]>
  * Copyright (C) 2013 Suriyan Ramasami <[email protected]>
  *
  * Based on dockstar.h originally written by
@@ -14,32 +15,18 @@
 #ifndef _CONFIG_GOFLEXHOME_H
 #define _CONFIG_GOFLEXHOME_H
 
+#include <linux/bitops.h>
+
 /*
  * Default GPIO configuration and LED status
  */
 #define GOFLEXHOME_OE_LOW               (~(0))
 #define GOFLEXHOME_OE_HIGH              (~(0))
-#define GOFLEXHOME_OE_VAL_LOW           (1 << 29)       /* USB_PWEN low */
-#define GOFLEXHOME_OE_VAL_HIGH          (1 << 17)       /* LED pin high */
-
-/* PHY related */
-#define MV88E1116_LED_FCTRL_REG         10
-#define MV88E1116_CPRSP_CR3_REG         21
-#define MV88E1116_MAC_CTRL_REG          21
-#define MV88E1116_PGADR_REG             22
-#define MV88E1116_RGMII_TXTM_CTRL       (1 << 4)
-#define MV88E1116_RGMII_RXTM_CTRL       (1 << 5)
+#define GOFLEXHOME_OE_VAL_LOW		BIT(29)		/* USB_PWEN low */
+#define GOFLEXHOME_OE_VAL_HIGH          BIT(17)		/* LED pin high */
 
 #include "mv-common.h"
 
-/*
- *  Environment variables configurations
- */
-/*
- * max 4k env size is enough, but in case of nand
- * it has to be rounded to sector size
- */
-
 /*
  * Default environment variables
  */
@@ -47,22 +34,21 @@
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"console=console=ttyS0,115200\0" \
 	"mtdids=nand0=orion_nand\0" \
-	"mtdparts="CONFIG_MTDPARTS_DEFAULT \
+	"mtdparts=" CONFIG_MTDPARTS_DEFAULT \
 	"kernel=/boot/uImage\0" \
 	"bootargs_root=ubi.mtd=root root=ubi0:root rootfstype=ubifs ro\0"
 
 /*
  * Ethernet Driver configuration
  */
-#ifdef CONFIG_CMD_NET
 #define CONFIG_MVGBE_PORTS	{1, 0}	/* enable port 0 only */
 #define CONFIG_PHY_BASE_ADR	0
-#endif /* CONFIG_CMD_NET */
+#ifdef CONFIG_RESET_PHY_R
+#undef CONFIG_RESET_PHY_R      /* remove legacy reset_phy() */
+#endif
 
 /* SATA driver configuration */
-#ifdef CONFIG_SATA
 #define CONFIG_SYS_SATA_MAX_DEVICE	1
 #define CONFIG_LBA48
-#endif /* CONFIG_SATA */
 
 #endif /* _CONFIG_GOFLEXHOME_H */
Signature · 1 line
2.30.2
Reviewed-by on v1 1/1
#1 lore raw
Quoted 13 lines · On Tuesday 25 January 2022 19:33:44 Tony Dinh wrote:

The GoFlex Home board has the network chip Marvell 88E1116R. Use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet.

- Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board.
- Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code.
- Enable CONFIG_PHY_MARVELL to properly configure the network.
- Miscellaneous changes: use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, use BIT macro, and cleanup comments.

Quoted 1 line

Nice cleanup,

Quoted 227 lines

---

 board/Seagate/goflexhome/goflexhome.c | 84 ++++-----------------------
 configs/goflexhome_defconfig          |  2 +
 include/configs/goflexhome.h          | 32 +++-------
 3 files changed, 22 insertions(+), 96 deletions(-)
board/Seagate/goflexhome/goflexhome.c +11 -73
index 52be64fb8c..caea89c10e 100644
@@ -1,10 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0+
 /*
- * Copyright (C) 2021
- * Tony Dinh <[email protected]>
- * Suriyan Ramasami <[email protected]>
- *
- * Copyright (C) 2013 Suriyan Ramasami <[email protected]>
+ * Copyright (C) 2021-2022 Tony Dinh <[email protected]>
+ * Copyright (C) 2013-2021 Suriyan Ramasami <[email protected]>
  *
  * Based on dockstar.c originally written by
  * Copyright (C) 2010  Eric C. Cooper <[email protected]>
@@ -18,14 +15,14 @@
 #include <common.h>
 #include <bootstage.h>
 #include <init.h>
-#include <miiphy.h>
-#include <net.h>
+#include <netdev.h>
 #include <asm/global_data.h>
 #include <asm/mach-types.h>
 #include <asm/arch/soc.h>
 #include <asm/arch/mpp.h>
 #include <asm/arch/cpu.h>
 #include <asm/io.h>
+#include <linux/bitops.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -98,6 +95,11 @@ int board_early_init_f(void)
 	return 0;
 }
 
+int board_eth_init(struct bd_info *bis)
+{
+	return cpu_eth_init(bis);
+}
+
 int board_init(void)
 {
 	/*
@@ -111,73 +113,9 @@ int board_init(void)
 	return 0;
 }
 
-static int fdt_get_phy_addr(const char *path)
-{
-	const void *fdt = gd->fdt_blob;
-	const u32 *reg;
-	const u32 *val;
-	int node, phandle, addr;
-
-	/* Find the node by its full path */
-	node = fdt_path_offset(fdt, path);
-	if (node >= 0) {
-		/* Look up phy-handle */
-		val = fdt_getprop(fdt, node, "phy-handle", NULL);
-		if (val) {
-			phandle = fdt32_to_cpu(*val);
-			if (!phandle)
-				return -1;
-			/* Follow it to its node */
-			node = fdt_node_offset_by_phandle(fdt, phandle);
-			if (node) {
-				/* Look up reg */
-				reg = fdt_getprop(fdt, node, "reg", NULL);
-				if (reg) {
-					addr = fdt32_to_cpu(*reg);
-					return addr;
-				}
-			}
-		}
-	}
-	return -1;
-}
-
-#ifdef CONFIG_RESET_PHY_R
-/* Configure and enable MV88E1116 PHY */
-void reset_phy(void)
-{
-	u16 reg;
-	int phyaddr;
-	char *name = "ethernet-controller@72000";
-	char *eth0_path = "/ocp@f1000000/ethernet-controller@72000/ethernet0-port@0";
-
-	if (miiphy_set_current_dev(name))
-		return;
-
-	phyaddr = fdt_get_phy_addr(eth0_path);
-	if (phyaddr < 0)
-		return;
-
-	/*
-	 * Enable RGMII delay on Tx and Rx for CPU port
-	 * Ref: sec 4.7.2 of chip datasheet
-	 */
-	miiphy_write(name, phyaddr, MV88E1116_PGADR_REG, 2);
-	miiphy_read(name, phyaddr, MV88E1116_MAC_CTRL_REG, &reg);
-	reg |= (MV88E1116_RGMII_RXTM_CTRL | MV88E1116_RGMII_TXTM_CTRL);
-	miiphy_write(name, phyaddr, MV88E1116_MAC_CTRL_REG, reg);
-	miiphy_write(name, phyaddr, MV88E1116_PGADR_REG, 0);
-
-	/* reset the phy */
-	miiphy_reset(name, phyaddr);
-
-	printf("88E1116 Initialized on %s\n", name);
-}
-#endif /* CONFIG_RESET_PHY_R */
-
 #if CONFIG_IS_ENABLED(BOOTSTAGE)
-#define GREEN_LED	(1 << 14)
-#define ORANGE_LED	(1 << 15)
+#define GREEN_LED	BIT(14)
+#define ORANGE_LED	BIT(15)
 #define BOTH_LEDS	(GREEN_LED | ORANGE_LED)
 #define NEITHER_LED	0
 
configs/goflexhome_defconfig +2 -0
index ec8b7398d0..e6eb00a938 100644
@@ -2,6 +2,7 @@ CONFIG_ARM=y
 CONFIG_SKIP_LOWLEVEL_INIT=y
 CONFIG_SYS_DCACHE_OFF=y
 CONFIG_ARCH_CPU_INIT=y
+CONFIG_SYS_THUMB_BUILD=y
 CONFIG_ARCH_KIRKWOOD=y
 CONFIG_SYS_KWD_CONFIG="board/Seagate/goflexhome/kwbimage.cfg"
 CONFIG_SYS_TEXT_BASE=0x600000
@@ -47,6 +48,7 @@ CONFIG_SATA_MV=y
 # CONFIG_MMC is not set
 CONFIG_MTD=y
 CONFIG_MTD_RAW_NAND=y
+CONFIG_PHY_MARVELL=y
 CONFIG_DM_ETH=y
 CONFIG_MVGBE=y
 CONFIG_MII=y
include/configs/goflexhome.h +9 -23
index 90e37d9853..c279579268 100644
@@ -1,5 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
+ * Copyright (C) 2022 Tony Dinh <[email protected]>
  * Copyright (C) 2013 Suriyan Ramasami <[email protected]>
  *
  * Based on dockstar.h originally written by
@@ -14,32 +15,18 @@
 #ifndef _CONFIG_GOFLEXHOME_H
 #define _CONFIG_GOFLEXHOME_H
 
+#include <linux/bitops.h>
+
 /*
  * Default GPIO configuration and LED status
  */
 #define GOFLEXHOME_OE_LOW               (~(0))
 #define GOFLEXHOME_OE_HIGH              (~(0))
-#define GOFLEXHOME_OE_VAL_LOW           (1 << 29)       /* USB_PWEN low */
-#define GOFLEXHOME_OE_VAL_HIGH          (1 << 17)       /* LED pin high */
-
-/* PHY related */
-#define MV88E1116_LED_FCTRL_REG         10
-#define MV88E1116_CPRSP_CR3_REG         21
-#define MV88E1116_MAC_CTRL_REG          21
-#define MV88E1116_PGADR_REG             22
-#define MV88E1116_RGMII_TXTM_CTRL       (1 << 4)
-#define MV88E1116_RGMII_RXTM_CTRL       (1 << 5)
+#define GOFLEXHOME_OE_VAL_LOW		BIT(29)		/* USB_PWEN low */
+#define GOFLEXHOME_OE_VAL_HIGH          BIT(17)		/* LED pin high */
 
 #include "mv-common.h"
 
-/*
- *  Environment variables configurations
- */
-/*
- * max 4k env size is enough, but in case of nand
- * it has to be rounded to sector size
- */
-
 /*
  * Default environment variables
  */
@@ -47,22 +34,21 @@
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"console=console=ttyS0,115200\0" \
 	"mtdids=nand0=orion_nand\0" \
-	"mtdparts="CONFIG_MTDPARTS_DEFAULT \
+	"mtdparts=" CONFIG_MTDPARTS_DEFAULT \
 	"kernel=/boot/uImage\0" \
 	"bootargs_root=ubi.mtd=root root=ubi0:root rootfstype=ubifs ro\0"
 
 /*
  * Ethernet Driver configuration
  */
-#ifdef CONFIG_CMD_NET
 #define CONFIG_MVGBE_PORTS	{1, 0}	/* enable port 0 only */
 #define CONFIG_PHY_BASE_ADR	0
-#endif /* CONFIG_CMD_NET */
+#ifdef CONFIG_RESET_PHY_R
+#undef CONFIG_RESET_PHY_R      /* remove legacy reset_phy() */
+#endif
 
 /* SATA driver configuration */
-#ifdef CONFIG_SATA
 #define CONFIG_SYS_SATA_MAX_DEVICE	1
 #define CONFIG_LBA48
-#endif /* CONFIG_SATA */
 
 #endif /* _CONFIG_GOFLEXHOME_H */
Signature · 1 line
2.30.2
Reviewed-by on v1 1/1
#2 lore raw
In reply to Tony Dinh
Quoted 13 lines · Tony Dinh

The GoFlex Home board has the network chip Marvell 88E1116R. Use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet.

- Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board.
- Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code.
- Enable CONFIG_PHY_MARVELL to properly configure the network.
- Miscellaneous changes: use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, use BIT macro, and cleanup comments.

Quoted 1 line

Thanks,
Stefan

Quoted 214 lines

---

  board/Seagate/goflexhome/goflexhome.c | 84 ++++-----------------------
  configs/goflexhome_defconfig          |  2 +
  include/configs/goflexhome.h          | 32 +++-------
  3 files changed, 22 insertions(+), 96 deletions(-)
board/Seagate/goflexhome/goflexhome.c +11 -73
index 52be64fb8c..caea89c10e 100644
@@ -1,10 +1,7 @@
  // SPDX-License-Identifier: GPL-2.0+
  /*
- * Copyright (C) 2021
- * Tony Dinh <[email protected]>
- * Suriyan Ramasami <[email protected]>
- *
- * Copyright (C) 2013 Suriyan Ramasami <[email protected]>
+ * Copyright (C) 2021-2022 Tony Dinh <[email protected]>
+ * Copyright (C) 2013-2021 Suriyan Ramasami <[email protected]>
   *
   * Based on dockstar.c originally written by
   * Copyright (C) 2010  Eric C. Cooper <[email protected]>
@@ -18,14 +15,14 @@
  #include <common.h>
  #include <bootstage.h>
  #include <init.h>
-#include <miiphy.h>
-#include <net.h>
+#include <netdev.h>
  #include <asm/global_data.h>
  #include <asm/mach-types.h>
  #include <asm/arch/soc.h>
  #include <asm/arch/mpp.h>
  #include <asm/arch/cpu.h>
  #include <asm/io.h>
+#include <linux/bitops.h>
 
  DECLARE_GLOBAL_DATA_PTR;
 
@@ -98,6 +95,11 @@ int board_early_init_f(void)
  	return 0;
  }
 
+int board_eth_init(struct bd_info *bis)
+{
+	return cpu_eth_init(bis);
+}
+
  int board_init(void)
  {
  	/*
@@ -111,73 +113,9 @@ int board_init(void)
  	return 0;
  }
 
-static int fdt_get_phy_addr(const char *path)
-{
-	const void *fdt = gd->fdt_blob;
-	const u32 *reg;
-	const u32 *val;
-	int node, phandle, addr;
-
-	/* Find the node by its full path */
-	node = fdt_path_offset(fdt, path);
-	if (node >= 0) {
-		/* Look up phy-handle */
-		val = fdt_getprop(fdt, node, "phy-handle", NULL);
-		if (val) {
-			phandle = fdt32_to_cpu(*val);
-			if (!phandle)
-				return -1;
-			/* Follow it to its node */
-			node = fdt_node_offset_by_phandle(fdt, phandle);
-			if (node) {
-				/* Look up reg */
-				reg = fdt_getprop(fdt, node, "reg", NULL);
-				if (reg) {
-					addr = fdt32_to_cpu(*reg);
-					return addr;
-				}
-			}
-		}
-	}
-	return -1;
-}
-
-#ifdef CONFIG_RESET_PHY_R
-/* Configure and enable MV88E1116 PHY */
-void reset_phy(void)
-{
-	u16 reg;
-	int phyaddr;
-	char *name = "ethernet-controller@72000";
-	char *eth0_path = "/ocp@f1000000/ethernet-controller@72000/ethernet0-port@0";
-
-	if (miiphy_set_current_dev(name))
-		return;
-
-	phyaddr = fdt_get_phy_addr(eth0_path);
-	if (phyaddr < 0)
-		return;
-
-	/*
-	 * Enable RGMII delay on Tx and Rx for CPU port
-	 * Ref: sec 4.7.2 of chip datasheet
-	 */
-	miiphy_write(name, phyaddr, MV88E1116_PGADR_REG, 2);
-	miiphy_read(name, phyaddr, MV88E1116_MAC_CTRL_REG, &reg);
-	reg |= (MV88E1116_RGMII_RXTM_CTRL | MV88E1116_RGMII_TXTM_CTRL);
-	miiphy_write(name, phyaddr, MV88E1116_MAC_CTRL_REG, reg);
-	miiphy_write(name, phyaddr, MV88E1116_PGADR_REG, 0);
-
-	/* reset the phy */
-	miiphy_reset(name, phyaddr);
-
-	printf("88E1116 Initialized on %s\n", name);
-}
-#endif /* CONFIG_RESET_PHY_R */
-
  #if CONFIG_IS_ENABLED(BOOTSTAGE)
-#define GREEN_LED	(1 << 14)
-#define ORANGE_LED	(1 << 15)
+#define GREEN_LED	BIT(14)
+#define ORANGE_LED	BIT(15)
  #define BOTH_LEDS	(GREEN_LED | ORANGE_LED)
  #define NEITHER_LED	0
 
configs/goflexhome_defconfig +2 -0
index ec8b7398d0..e6eb00a938 100644
@@ -2,6 +2,7 @@ CONFIG_ARM=y
  CONFIG_SKIP_LOWLEVEL_INIT=y
  CONFIG_SYS_DCACHE_OFF=y
  CONFIG_ARCH_CPU_INIT=y
+CONFIG_SYS_THUMB_BUILD=y
  CONFIG_ARCH_KIRKWOOD=y
  CONFIG_SYS_KWD_CONFIG="board/Seagate/goflexhome/kwbimage.cfg"
  CONFIG_SYS_TEXT_BASE=0x600000
@@ -47,6 +48,7 @@ CONFIG_SATA_MV=y
  # CONFIG_MMC is not set
  CONFIG_MTD=y
  CONFIG_MTD_RAW_NAND=y
+CONFIG_PHY_MARVELL=y
  CONFIG_DM_ETH=y
  CONFIG_MVGBE=y
  CONFIG_MII=y
include/configs/goflexhome.h +7 -21
index 90e37d9853..c279579268 100644
@@ -1,5 +1,6 @@
  /* SPDX-License-Identifier: GPL-2.0+ */
  /*
+ * Copyright (C) 2022 Tony Dinh <[email protected]>
   * Copyright (C) 2013 Suriyan Ramasami <[email protected]>
   *
   * Based on dockstar.h originally written by
@@ -14,32 +15,18 @@
  #ifndef _CONFIG_GOFLEXHOME_H
  #define _CONFIG_GOFLEXHOME_H
 
+#include <linux/bitops.h>
+
  /*
   * Default GPIO configuration and LED status
   */
  #define GOFLEXHOME_OE_LOW               (~(0))
  #define GOFLEXHOME_OE_HIGH              (~(0))
-#define GOFLEXHOME_OE_VAL_LOW           (1 << 29)       /* USB_PWEN low */
-#define GOFLEXHOME_OE_VAL_HIGH          (1 << 17)       /* LED pin high */
-
-/* PHY related */
-#define MV88E1116_LED_FCTRL_REG         10
-#define MV88E1116_CPRSP_CR3_REG         21
-#define MV88E1116_MAC_CTRL_REG          21
-#define MV88E1116_PGADR_REG             22
-#define MV88E1116_RGMII_TXTM_CTRL       (1 << 4)
-#define MV88E1116_RGMII_RXTM_CTRL       (1 << 5)
+#define GOFLEXHOME_OE_VAL_LOW		BIT(29)		/* USB_PWEN low */
+#define GOFLEXHOME_OE_VAL_HIGH          BIT(17)		/* LED pin high */
 
  #include "mv-common.h"
 
-/*
- *  Environment variables configurations
- */
-/*
- * max 4k env size is enough, but in case of nand
- * it has to be rounded to sector size
- */
-
  /*
   * Default environment variables
   */
@@ -47,22 +34,21 @@
  #define CONFIG_EXTRA_ENV_SETTINGS \
  	"console=console=ttyS0,115200\0" \
  	"mtdids=nand0=orion_nand\0" \
-	"mtdparts="CONFIG_MTDPARTS_DEFAULT \
+	"mtdparts=" CONFIG_MTDPARTS_DEFAULT \
  	"kernel=/boot/uImage\0" \
  	"bootargs_root=ubi.mtd=root root=ubi0:root rootfstype=ubifs ro\0"
 
  /*
   * Ethernet Driver configuration
   */
-#ifdef CONFIG_CMD_NET
  #define CONFIG_MVGBE_PORTS	{1, 0}	/* enable port 0 only */
  #define CONFIG_PHY_BASE_ADR	0
-#endif /* CONFIG_CMD_NET */
+#ifdef CONFIG_RESET_PHY_R

include/configs/goflexhome.h line 54

Quoted 10 lines
include/configs/goflexhome.h +2 -2
+#undef CONFIG_RESET_PHY_R      /* remove legacy reset_phy() */
+#endif
 
  /* SATA driver configuration */
-#ifdef CONFIG_SATA
  #define CONFIG_SYS_SATA_MAX_DEVICE	1
  #define CONFIG_LBA48
-#endif /* CONFIG_SATA */
 
  #endif /* _CONFIG_GOFLEXHOME_H */

Viele Grüße,
Stefan Roese

Signature · 3 lines
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: [email protected]
#3 lore raw
In reply to Tony Dinh
Quoted 13 lines · Tony Dinh

The GoFlex Home board has the network chip Marvell 88E1116R. Use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet.

- Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board.
- Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code.
- Enable CONFIG_PHY_MARVELL to properly configure the network.
- Miscellaneous changes: use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, use BIT macro, and cleanup comments.

Quoted 1 line

Applied to u-boot-marvell/master

Thanks,
Stefan

Quoted 214 lines

---

  board/Seagate/goflexhome/goflexhome.c | 84 ++++-----------------------
  configs/goflexhome_defconfig          |  2 +
  include/configs/goflexhome.h          | 32 +++-------
  3 files changed, 22 insertions(+), 96 deletions(-)
board/Seagate/goflexhome/goflexhome.c +11 -73
index 52be64fb8c..caea89c10e 100644
@@ -1,10 +1,7 @@
  // SPDX-License-Identifier: GPL-2.0+
  /*
- * Copyright (C) 2021
- * Tony Dinh <[email protected]>
- * Suriyan Ramasami <[email protected]>
- *
- * Copyright (C) 2013 Suriyan Ramasami <[email protected]>
+ * Copyright (C) 2021-2022 Tony Dinh <[email protected]>
+ * Copyright (C) 2013-2021 Suriyan Ramasami <[email protected]>
   *
   * Based on dockstar.c originally written by
   * Copyright (C) 2010  Eric C. Cooper <[email protected]>
@@ -18,14 +15,14 @@
  #include <common.h>
  #include <bootstage.h>
  #include <init.h>
-#include <miiphy.h>
-#include <net.h>
+#include <netdev.h>
  #include <asm/global_data.h>
  #include <asm/mach-types.h>
  #include <asm/arch/soc.h>
  #include <asm/arch/mpp.h>
  #include <asm/arch/cpu.h>
  #include <asm/io.h>
+#include <linux/bitops.h>
 
  DECLARE_GLOBAL_DATA_PTR;
 
@@ -98,6 +95,11 @@ int board_early_init_f(void)
  	return 0;
  }
 
+int board_eth_init(struct bd_info *bis)
+{
+	return cpu_eth_init(bis);
+}
+
  int board_init(void)
  {
  	/*
@@ -111,73 +113,9 @@ int board_init(void)
  	return 0;
  }
 
-static int fdt_get_phy_addr(const char *path)
-{
-	const void *fdt = gd->fdt_blob;
-	const u32 *reg;
-	const u32 *val;
-	int node, phandle, addr;
-
-	/* Find the node by its full path */
-	node = fdt_path_offset(fdt, path);
-	if (node >= 0) {
-		/* Look up phy-handle */
-		val = fdt_getprop(fdt, node, "phy-handle", NULL);
-		if (val) {
-			phandle = fdt32_to_cpu(*val);
-			if (!phandle)
-				return -1;
-			/* Follow it to its node */
-			node = fdt_node_offset_by_phandle(fdt, phandle);
-			if (node) {
-				/* Look up reg */
-				reg = fdt_getprop(fdt, node, "reg", NULL);
-				if (reg) {
-					addr = fdt32_to_cpu(*reg);
-					return addr;
-				}
-			}
-		}
-	}
-	return -1;
-}
-
-#ifdef CONFIG_RESET_PHY_R
-/* Configure and enable MV88E1116 PHY */
-void reset_phy(void)
-{
-	u16 reg;
-	int phyaddr;
-	char *name = "ethernet-controller@72000";
-	char *eth0_path = "/ocp@f1000000/ethernet-controller@72000/ethernet0-port@0";
-
-	if (miiphy_set_current_dev(name))
-		return;
-
-	phyaddr = fdt_get_phy_addr(eth0_path);
-	if (phyaddr < 0)
-		return;
-
-	/*
-	 * Enable RGMII delay on Tx and Rx for CPU port
-	 * Ref: sec 4.7.2 of chip datasheet
-	 */
-	miiphy_write(name, phyaddr, MV88E1116_PGADR_REG, 2);
-	miiphy_read(name, phyaddr, MV88E1116_MAC_CTRL_REG, &reg);
-	reg |= (MV88E1116_RGMII_RXTM_CTRL | MV88E1116_RGMII_TXTM_CTRL);
-	miiphy_write(name, phyaddr, MV88E1116_MAC_CTRL_REG, reg);
-	miiphy_write(name, phyaddr, MV88E1116_PGADR_REG, 0);
-
-	/* reset the phy */
-	miiphy_reset(name, phyaddr);
-
-	printf("88E1116 Initialized on %s\n", name);
-}
-#endif /* CONFIG_RESET_PHY_R */
-
  #if CONFIG_IS_ENABLED(BOOTSTAGE)
-#define GREEN_LED	(1 << 14)
-#define ORANGE_LED	(1 << 15)
+#define GREEN_LED	BIT(14)
+#define ORANGE_LED	BIT(15)
  #define BOTH_LEDS	(GREEN_LED | ORANGE_LED)
  #define NEITHER_LED	0
 
configs/goflexhome_defconfig +2 -0
index ec8b7398d0..e6eb00a938 100644
@@ -2,6 +2,7 @@ CONFIG_ARM=y
  CONFIG_SKIP_LOWLEVEL_INIT=y
  CONFIG_SYS_DCACHE_OFF=y
  CONFIG_ARCH_CPU_INIT=y
+CONFIG_SYS_THUMB_BUILD=y
  CONFIG_ARCH_KIRKWOOD=y
  CONFIG_SYS_KWD_CONFIG="board/Seagate/goflexhome/kwbimage.cfg"
  CONFIG_SYS_TEXT_BASE=0x600000
@@ -47,6 +48,7 @@ CONFIG_SATA_MV=y
  # CONFIG_MMC is not set
  CONFIG_MTD=y
  CONFIG_MTD_RAW_NAND=y
+CONFIG_PHY_MARVELL=y
  CONFIG_DM_ETH=y
  CONFIG_MVGBE=y
  CONFIG_MII=y
include/configs/goflexhome.h +7 -21
index 90e37d9853..c279579268 100644
@@ -1,5 +1,6 @@
  /* SPDX-License-Identifier: GPL-2.0+ */
  /*
+ * Copyright (C) 2022 Tony Dinh <[email protected]>
   * Copyright (C) 2013 Suriyan Ramasami <[email protected]>
   *
   * Based on dockstar.h originally written by
@@ -14,32 +15,18 @@
  #ifndef _CONFIG_GOFLEXHOME_H
  #define _CONFIG_GOFLEXHOME_H
 
+#include <linux/bitops.h>
+
  /*
   * Default GPIO configuration and LED status
   */
  #define GOFLEXHOME_OE_LOW               (~(0))
  #define GOFLEXHOME_OE_HIGH              (~(0))
-#define GOFLEXHOME_OE_VAL_LOW           (1 << 29)       /* USB_PWEN low */
-#define GOFLEXHOME_OE_VAL_HIGH          (1 << 17)       /* LED pin high */
-
-/* PHY related */
-#define MV88E1116_LED_FCTRL_REG         10
-#define MV88E1116_CPRSP_CR3_REG         21
-#define MV88E1116_MAC_CTRL_REG          21
-#define MV88E1116_PGADR_REG             22
-#define MV88E1116_RGMII_TXTM_CTRL       (1 << 4)
-#define MV88E1116_RGMII_RXTM_CTRL       (1 << 5)
+#define GOFLEXHOME_OE_VAL_LOW		BIT(29)		/* USB_PWEN low */
+#define GOFLEXHOME_OE_VAL_HIGH          BIT(17)		/* LED pin high */
 
  #include "mv-common.h"
 
-/*
- *  Environment variables configurations
- */
-/*
- * max 4k env size is enough, but in case of nand
- * it has to be rounded to sector size
- */
-
  /*
   * Default environment variables
   */
@@ -47,22 +34,21 @@
  #define CONFIG_EXTRA_ENV_SETTINGS \
  	"console=console=ttyS0,115200\0" \
  	"mtdids=nand0=orion_nand\0" \
-	"mtdparts="CONFIG_MTDPARTS_DEFAULT \
+	"mtdparts=" CONFIG_MTDPARTS_DEFAULT \
  	"kernel=/boot/uImage\0" \
  	"bootargs_root=ubi.mtd=root root=ubi0:root rootfstype=ubifs ro\0"
 
  /*
   * Ethernet Driver configuration
   */
-#ifdef CONFIG_CMD_NET
  #define CONFIG_MVGBE_PORTS	{1, 0}	/* enable port 0 only */
  #define CONFIG_PHY_BASE_ADR	0
-#endif /* CONFIG_CMD_NET */
+#ifdef CONFIG_RESET_PHY_R

include/configs/goflexhome.h line 54

Quoted 10 lines
include/configs/goflexhome.h +2 -2
+#undef CONFIG_RESET_PHY_R      /* remove legacy reset_phy() */
+#endif
 
  /* SATA driver configuration */
-#ifdef CONFIG_SATA
  #define CONFIG_SYS_SATA_MAX_DEVICE	1
  #define CONFIG_LBA48
-#endif /* CONFIG_SATA */
 
  #endif /* _CONFIG_GOFLEXHOME_H */

Viele Grüße,
Stefan Roese

Signature · 3 lines
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: [email protected]