local.conf.sample: use https instead of http for SSTATE_MIRRORS
A message that is not in the archive (sent off-list or not yet received): [email protected]
PATCH v2 1/1 local.conf.sample: use https instead of http for SSTATE_MIRRORS
Both http and https work, but we should get fewer questions with https
--- meta-poky/conf/local.conf.sample | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
meta-poky/conf/local.conf.sample +3 -3
@@ -206,7 +206,7 @@ BB_DISKMON_DIRS ??= "\ # used to accelerate build time. This variable can be used to configure the system # to search other mirror locations for these objects before it builds the data itself. # -# This can be a filesystem directory, or a remote url such as http or ftp. These +# This can be a filesystem directory, or a remote url such as https or ftp. These # would contain the sstate-cache results from previous builds (possibly from other # machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the # cache locations to check for the shared objects.
@@ -214,7 +214,7 @@ BB_DISKMON_DIRS ??= "\ # at the end as shown in the examples below. This will be substituted with the # correct path within the directory structure. #SSTATE_MIRRORS ?= "\ -#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* https://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ #file://.* file:///some/local/dir/sstate/PATH" #
@@ -229,7 +229,7 @@ BB_DISKMON_DIRS ??= "\ # Note: For this to work you also need hash-equivalence passthrough to the matching server # #BB_HASHSERVE_UPSTREAM = "typhoon.yocto.io:8687" -#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/3.4/PATH;downloadfilename=PATH" +#SSTATE_MIRRORS ?= "file://.* https://sstate.yoctoproject.org/3.4/PATH;downloadfilename=PATH" # # Qemu configuration
Signature · 1 line
2.25.1
Quoted 29 lines
-----Original Message-----
From: [email protected] <[email protected]> On Behalf Of Michael Opdenacker
Sent: den 26 januari 2022 11:44
To: [email protected]
Cc: Michael Opdenacker <[email protected]>
Subject: [poky] [PATCH v2] local.conf.sample: use https instead of http forSSTATE_MIRRORSBoth http and https work, but we should get fewer questions with https
Signed-off-by Michael Opdenacker <[email protected]>--- meta-poky/conf/local.conf.sample | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)meta-poky/conf/local.conf.sample +1
-1@@ -206,7 +206,7 @@ BB_DISKMON_DIRS ??= "\ # used to accelerate build time. This variable can be used to configure the system # to search other mirror locations for these objects before it builds the data itself. # -# This can be a filesystem directory, or a remote url such as http or ftp. These +# This can be a filesystem directory, or a remote url such as https or ftp. These # would contain the sstate-cache results from previous builds (possibly from other # machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the # cache locations to check for the shared objects.
meta-poky/conf/local.conf.sample BB_DISKMON_DIRS ??= "\ · line 217
Quoted 5 lines
meta-poky/conf/local.conf.sample +1
-1@@ -214,7 +214,7 @@ BB_DISKMON_DIRS ??= "\ # at the end as shown in the examples below. This will be substituted with the # correct path within the directory structure. #SSTATE_MIRRORS ?= "\ -#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* https://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
While there, you may as well remove the "\n".
Quoted 13 lines
meta-poky/conf/local.conf.sample +1
-2#file://.* file:///some/local/dir/sstate/PATH" #@@ -229,7 +229,7 @@ BB_DISKMON_DIRS ??= "\ # Note: For this to work you also need hash-equivalence passthrough to the matching server # #BB_HASHSERVE_UPSTREAM = "typhoon.yocto.io:8687" -#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/3.4/PATH;downloadfilename=PATH" +#SSTATE_MIRRORS ?= "file://.* https://sstate.yoctoproject.org/3.4/PATH;downloadfilename=PATH" # # Qemu configuration --
Quoted 1 line
2.25.1
//Peter
Hi Peter,
Thank you very much for the review!
Quoted 27 lines · Peter Kjellerstedt
Quoted 27 lines
-----Original Message-----
From: [email protected] <[email protected]> On Behalf Of Michael Opdenacker
Sent: den 26 januari 2022 11:44
To: [email protected]
Cc: Michael Opdenacker <[email protected]>
Subject: [poky] [PATCH v2] local.conf.sample: use https instead of http forSSTATE_MIRRORSBoth http and https work, but we should get fewer questions with https
Signed-off-by Michael Opdenacker <[email protected]>--- meta-poky/conf/local.conf.sample | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)meta-poky/conf/local.conf.sample +1
-1@@ -206,7 +206,7 @@ BB_DISKMON_DIRS ??= "\ # used to accelerate build time. This variable can be used to configure the system # to search other mirror locations for these objects before it builds the data itself. # -# This can be a filesystem directory, or a remote url such as http or ftp. These +# This can be a filesystem directory, or a remote url such as https or ftp. These # would contain the sstate-cache results from previous builds (possibly from other # machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
Quoted 8 lines
meta-poky/conf/local.conf.sample BB_DISKMON_DIRS ??= "\ · line 217
Quoted 7 lines
meta-poky/conf/local.conf.sample +1
-1# cache locations to check for the shared objects.@@ -214,7 +214,7 @@ BB_DISKMON_DIRS ??= "\ # at the end as shown in the examples below. This will be substituted with the # correct path within the directory structure. #SSTATE_MIRRORS ?= "\ -#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* https://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \While there, you may as well remove the "\n".
Good idea. We already did that in other places.
However, shouldn't it be a separate commit? I can read Quentin's lips ;-) Cheers
Michael.
Signature · 3 lines
Michael Opdenacker, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
Quoted 50 lines
-----Original Message-----
From: Michael Opdenacker <[email protected]>
Sent: den 27 januari 2022 17:11
To: Peter Kjellerstedt <[email protected]>; [email protected]
Subject: Re: [poky] [PATCH v2] local.conf.sample: use https instead of http forSSTATE_MIRRORSHi Peter,
Thank you very much for the review!
Quoted 28 lines · Peter Kjellerstedt
Quoted 28 lines
-----Original Message-----
From: [email protected] <[email protected]> On Behalf Of Michael Opdenacker
Sent: den 26 januari 2022 11:44
To: [email protected]
Cc: Michael Opdenacker <[email protected]>
Subject: [poky] [PATCH v2] local.conf.sample: use https instead of http forSSTATE_MIRRORSBoth http and https work, but we should get fewer questions with https
Signed-off-by Michael Opdenacker <[email protected]>--- meta-poky/conf/local.conf.sample | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)meta-poky/conf/local.conf.sample +1
-1@@ -206,7 +206,7 @@ BB_DISKMON_DIRS ??= "\ # used to accelerate build time. This variable can be used to configure the system # to search other mirror locations for these objects before it builds the data itself. # -# This can be a filesystem directory, or a remote url such as http or ftp. These +# This can be a filesystem directory, or a remote url such as https or ftp. These # would contain the sstate-cache results from previous builds (possibly from other # machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the # cache locations to check for the shared objects.Quoted 8 lines
meta-poky/conf/local.conf.sample BB_DISKMON_DIRS ??= "\ · line 217
Quoted 6 lines
meta-poky/conf/local.conf.sample +1
-1@@ -214,7 +214,7 @@ BB_DISKMON_DIRS ??= "\ # at the end as shown in the examples below. This will be substituted with the # correct path within the directory structure. #SSTATE_MIRRORS ?= "\ -#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* https://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \While there, you may as well remove the "\n".
Quoted 2 lines
Good idea. We already did that in other places.
However, shouldn't it be a separate commit? I can read Quentin's lips ;-)
True. There are a couple of other places that can be updated as well. I'll send a patch.
Quoted 7 lines
Cheers
Michael.--
Michael Opdenacker, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
//Peter