1GbE Intel Wired LAN Driver Updates 2022-01-27
Subsystems (3)
Tony Nguyen
maintainerChristophe Jaillet removes useless DMA-32 fallback calls from applicable Intel drivers and simplifies code as a result of the removal.
The following are changes since commit e2cf07654efb0fd7bbcb475c6f74be7b5755a8fd:
ptp: replace snprintf with sysfs_emit
and are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue 1GbE
Christophe JAILLET (10):
ixgb: Remove useless DMA-32 fallback configuration
ixgbe: Remove useless DMA-32 fallback configuration
ixgbevf: Remove useless DMA-32 fallback configuration
i40e: Remove useless DMA-32 fallback configuration
e1000e: Remove useless DMA-32 fallback configuration
iavf: Remove useless DMA-32 fallback configuration
ice: Remove useless DMA-32 fallback configuration
igc: Remove useless DMA-32 fallback configuration
igb: Remove useless DMA-32 fallback configuration
igbvf: Remove useless DMA-32 fallback configuration
drivers/net/ethernet/intel/e1000e/netdev.c | 22 ++++++------------- drivers/net/ethernet/intel/i40e/i40e_main.c | 9 +++----- drivers/net/ethernet/intel/iavf/iavf_main.c | 9 +++----- drivers/net/ethernet/intel/ice/ice_main.c | 2 -- drivers/net/ethernet/intel/igb/igb_main.c | 19 +++++----------- drivers/net/ethernet/intel/igbvf/netdev.c | 22 +++++-------------- drivers/net/ethernet/intel/igc/igc_main.c | 19 +++++----------- drivers/net/ethernet/intel/ixgb/ixgb_main.c | 19 +++++----------- drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 20 ++++++----------- .../net/ethernet/intel/ixgbevf/ixgbevf_main.c | 20 +++++------------ 10 files changed, 49 insertions(+), 112 deletions(-)
Signature · 1 line
2.31.1
Tony Nguyen
maintainerPATCH 1/10 ixgb: Remove useless DMA-32 fallback configuration
From: Christophe JAILLET <[email protected]>
As stated in [1], dma_set_mask() with a 64-bit mask never fails if dev->dma_mask is non-NULL.
So, if it fails, the 32 bits case will also fail for the same reason.
So, if dma_set_mask_and_coherent() succeeds, 'pci_using_dac' is known to be 1.
Simplify code and remove some dead code accordingly.
[1]: https://lkml.org/lkml/2021/6/7/398
--- drivers/net/ethernet/intel/ixgb/ixgb_main.c | 19 +++++-------------- 1 file changed, 5 insertions(+), 14 deletions(-)
drivers/net/ethernet/intel/ixgb/ixgb_main.c +5 -14
@@ -361,7 +361,6 @@ ixgb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)struct net_device *netdev =NULL ;struct ixgb_adapter *adapter;static int cards_found =0 ; -int pci_using_dac;u8 addr[ETH_ALEN ];int i;int err;
@@ -370,16 +369,10 @@ ixgb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)if (err)return err; - pci_using_dac =0 ; err =dma_set_mask_and_coherent (&pdev->dev,DMA_BIT_MASK (64 )); -if (!err) { - pci_using_dac =1 ; - }else { - err =dma_set_mask_and_coherent (&pdev->dev,DMA_BIT_MASK (32 )); -if (err) { -pr_err ("No usable DMA configuration, aborting\n" ); - goto err_dma_mask; - } +if (err) { +pr_err ("No usable DMA configuration, aborting\n" ); + goto err_dma_mask; } err =pci_request_regions (pdev, ixgb_driver_name);
@@ -444,10 +437,8 @@ ixgb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)NETIF_F_HW_VLAN_CTAG_FILTER ; netdev->hw_features |=NETIF_F_RXCSUM ; -if (pci_using_dac) { - netdev->features |=NETIF_F_HIGHDMA ; - netdev->vlan_features |=NETIF_F_HIGHDMA ; - } + netdev->features |=NETIF_F_HIGHDMA ; + netdev->vlan_features |=NETIF_F_HIGHDMA ;/* MTU range: 68 - 16114 */ netdev->min_mtu =ETH_MIN_MTU ;
Signature · 1 line
2.31.1
Tony Nguyen
maintainerPATCH 2/10 ixgbe: Remove useless DMA-32 fallback configuration
In reply to Tony NguyenFrom: Christophe JAILLET <[email protected]>
As stated in [1], dma_set_mask() with a 64-bit mask never fails if dev->dma_mask is non-NULL.
So, if it fails, the 32 bits case will also fail for the same reason.
So, if dma_set_mask_and_coherent() succeeds, 'pci_using_dac' is known to be 1.
Simplify code and remove some dead code accordingly.
[1]: https://lkml.org/lkml/2021/6/7/398
--- drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 20 +++++++------------ 1 file changed, 7 insertions(+), 13 deletions(-)
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +7 -13
@@ -10632,9 +10632,9 @@ static int ixgbe_probe(struct pci_dev *pdev, const struct pci_device_id *ent)struct ixgbe_adapter *adapter =NULL ;struct ixgbe_hw *hw;const struct ixgbe_info *ii = ixgbe_info_tbl[ent->driver_data]; -int i, err, pci_using_dac, expected_gts;unsigned int indices =MAX_TX_QUEUES ;u8 part_str[IXGBE_PBANUM_LENGTH ]; +int i, err, expected_gts;bool disable_dev = false;#ifdef IXGBE_FCOE u16 device_caps;
@@ -10654,16 +10654,11 @@ static int ixgbe_probe(struct pci_dev *pdev, const struct pci_device_id *ent)if (err)return err; -if (!dma_set_mask_and_coherent (&pdev->dev,DMA_BIT_MASK (64 ))) { - pci_using_dac =1 ; - }else { - err =dma_set_mask_and_coherent (&pdev->dev,DMA_BIT_MASK (32 )); -if (err) { -dev_err (&pdev->dev, -"No usable DMA configuration, aborting\n" ); - goto err_dma; - } - pci_using_dac =0 ; + err =dma_set_mask_and_coherent (&pdev->dev,DMA_BIT_MASK (64 )); +if (err) { +dev_err (&pdev->dev, +"No usable DMA configuration, aborting\n" ); + goto err_dma; } err =pci_request_mem_regions (pdev, ixgbe_driver_name);
@@ -10861,8 +10856,7 @@ static int ixgbe_probe(struct pci_dev *pdev, const struct pci_device_id *ent) netdev->hw_features |=NETIF_F_NTUPLE |NETIF_F_HW_TC ; -if (pci_using_dac) - netdev->features |=NETIF_F_HIGHDMA ; + netdev->features |=NETIF_F_HIGHDMA ; netdev->vlan_features |= netdev->features |NETIF_F_TSO_MANGLEID ; netdev->hw_enc_features |= netdev->vlan_features;
Signature · 1 line
2.31.1
Tony Nguyen
maintainerPATCH 3/10 ixgbevf: Remove useless DMA-32 fallback configuration
In reply to Tony NguyenFrom: Christophe JAILLET <[email protected]>
As stated in [1], dma_set_mask() with a 64-bit mask never fails if dev->dma_mask is non-NULL.
So, if it fails, the 32 bits case will also fail for the same reason.
So, if dma_set_mask_and_coherent() succeeds, 'pci_using_dac' is known to be 1.
Simplify code and remove some dead code accordingly.
[1]: https://lkml.org/lkml/2021/6/7/398
--- .../net/ethernet/intel/ixgbevf/ixgbevf_main.c | 20 ++++++------------- 1 file changed, 6 insertions(+), 14 deletions(-)
drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c +6 -14
@@ -4511,22 +4511,17 @@ static int ixgbevf_probe(struct pci_dev *pdev, const struct pci_device_id *ent)struct ixgbevf_adapter *adapter =NULL ;struct ixgbe_hw *hw =NULL ;const struct ixgbevf_info *ii = ixgbevf_info_tbl[ent->driver_data]; -int err, pci_using_dac;bool disable_dev = false; +int err; err =pci_enable_device (pdev);if (err)return err; -if (!dma_set_mask_and_coherent (&pdev->dev,DMA_BIT_MASK (64 ))) { - pci_using_dac =1 ; - }else { - err =dma_set_mask_and_coherent (&pdev->dev,DMA_BIT_MASK (32 )); -if (err) { -dev_err (&pdev->dev,"No usable DMA configuration, aborting\n" ); - goto err_dma; - } - pci_using_dac =0 ; + err =dma_set_mask_and_coherent (&pdev->dev,DMA_BIT_MASK (64 )); +if (err) { +dev_err (&pdev->dev,"No usable DMA configuration, aborting\n" ); + goto err_dma; } err =pci_request_regions (pdev, ixgbevf_driver_name);
@@ -4606,10 +4601,7 @@ static int ixgbevf_probe(struct pci_dev *pdev, const struct pci_device_id *ent) netdev->hw_features |=NETIF_F_GSO_PARTIAL |IXGBEVF_GSO_PARTIAL_FEATURES ; - netdev->features = netdev->hw_features; - -if (pci_using_dac) - netdev->features |=NETIF_F_HIGHDMA ; + netdev->features = netdev->hw_features |NETIF_F_HIGHDMA ; netdev->vlan_features |= netdev->features |NETIF_F_TSO_MANGLEID ; netdev->mpls_features |= NETIF_F_SG |
Signature · 1 line
2.31.1
Tony Nguyen
maintainerPATCH 4/10 i40e: Remove useless DMA-32 fallback configuration
In reply to Tony NguyenFrom: Christophe JAILLET <[email protected]>
As stated in [1], dma_set_mask() with a 64-bit mask never fails if dev->dma_mask is non-NULL.
So, if it fails, the 32 bits case will also fail for the same reason.
Simplify code and remove some dead code accordingly.
[1]: https://lkml.org/lkml/2021/6/7/398
--- drivers/net/ethernet/intel/i40e/i40e_main.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-)
drivers/net/ethernet/intel/i40e/i40e_main.c +3 -6
@@ -15322,12 +15322,9 @@ static int i40e_probe(struct pci_dev *pdev, const struct pci_device_id *ent)/* set up for high or low dma */ err =dma_set_mask_and_coherent (&pdev->dev,DMA_BIT_MASK (64 ));if (err) { - err =dma_set_mask_and_coherent (&pdev->dev,DMA_BIT_MASK (32 )); -if (err) { -dev_err (&pdev->dev, -"DMA configuration failed: 0x%x\n" , err); - goto err_dma; - } +dev_err (&pdev->dev, +"DMA configuration failed: 0x%x\n" , err); + goto err_dma; }/* set up pci connections */
Signature · 1 line
2.31.1
Tony Nguyen
maintainerPATCH 5/10 e1000e: Remove useless DMA-32 fallback configuration
In reply to Tony NguyenFrom: Christophe JAILLET <[email protected]>
As stated in [1], dma_set_mask() with a 64-bit mask never fails if dev->dma_mask is non-NULL.
So, if it fails, the 32 bits case will also fail for the same reason.
So, if dma_set_mask_and_coherent() succeeds, 'pci_using_dac' is known to be 1.
Simplify code and remove some dead code accordingly.
[1]: https://lkml.org/lkml/2021/6/7/398
--- drivers/net/ethernet/intel/e1000e/netdev.c | 22 +++++++--------------- 1 file changed, 7 insertions(+), 15 deletions(-)
drivers/net/ethernet/intel/e1000e/netdev.c +7 -15
@@ -7385,9 +7385,9 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent)resource_size_t flash_start, flash_len;static int cards_found;u16 aspm_disable_flag =0 ; -int bars, i, err, pci_using_dac;u16 eeprom_data =0 ;u16 eeprom_apme_mask =E1000_EEPROM_APME ; +int bars, i, err;s32 ret_val =0 ;if (ei->flags2 &FLAG2_DISABLE_ASPM_L0S )
@@ -7401,17 +7401,11 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent)if (err)return err; - pci_using_dac =0 ; err =dma_set_mask_and_coherent (&pdev->dev,DMA_BIT_MASK (64 )); -if (!err) { - pci_using_dac =1 ; - }else { - err =dma_set_mask_and_coherent (&pdev->dev,DMA_BIT_MASK (32 )); -if (err) { -dev_err (&pdev->dev, -"No usable DMA configuration, aborting\n" ); - goto err_dma; - } +if (err) { +dev_err (&pdev->dev, +"No usable DMA configuration, aborting\n" ); + goto err_dma; } bars =pci_select_bars (pdev,IORESOURCE_MEM );
@@ -7547,10 +7541,8 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent) netdev->priv_flags |=IFF_UNICAST_FLT ; -if (pci_using_dac) { - netdev->features |=NETIF_F_HIGHDMA ; - netdev->vlan_features |=NETIF_F_HIGHDMA ; - } + netdev->features |=NETIF_F_HIGHDMA ; + netdev->vlan_features |=NETIF_F_HIGHDMA ;/* MTU range: 68 - max_hw_frame_size */ netdev->min_mtu =ETH_MIN_MTU ;
Signature · 1 line
2.31.1
Tony Nguyen
maintainerPATCH 6/10 iavf: Remove useless DMA-32 fallback configuration
In reply to Tony NguyenFrom: Christophe JAILLET <[email protected]>
As stated in [1], dma_set_mask() with a 64-bit mask never fails if dev->dma_mask is non-NULL.
So, if it fails, the 32 bits case will also fail for the same reason.
Simplify code and remove some dead code accordingly.
[1]: https://lkml.org/lkml/2021/6/7/398
--- drivers/net/ethernet/intel/iavf/iavf_main.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-)
drivers/net/ethernet/intel/iavf/iavf_main.c +3 -6
@@ -4368,12 +4368,9 @@ static int iavf_probe(struct pci_dev *pdev, const struct pci_device_id *ent) err =dma_set_mask_and_coherent (&pdev->dev,DMA_BIT_MASK (64 ));if (err) { - err =dma_set_mask_and_coherent (&pdev->dev,DMA_BIT_MASK (32 )); -if (err) { -dev_err (&pdev->dev, -"DMA configuration failed: 0x%x\n" , err); - goto err_dma; - } +dev_err (&pdev->dev, +"DMA configuration failed: 0x%x\n" , err); + goto err_dma; } err =pci_request_regions (pdev, iavf_driver_name);
Signature · 1 line
2.31.1
Tony Nguyen
maintainerPATCH 7/10 ice: Remove useless DMA-32 fallback configuration
In reply to Tony NguyenFrom: Christophe JAILLET <[email protected]>
As stated in [1], dma_set_mask() with a 64-bit mask never fails if dev->dma_mask is non-NULL.
So, if it fails, the 32 bits case will also fail for the same reason.
Simplify code and remove some dead code accordingly.
[1]: https://lkml.org/lkml/2021/6/7/398
--- drivers/net/ethernet/intel/ice/ice_main.c | 2 -- 1 file changed, 2 deletions(-)
drivers/net/ethernet/intel/ice/ice_main.c +0 -2
@@ -4459,8 +4459,6 @@ ice_probe(struct pci_dev *pdev, const struct pci_device_id __always_unused *ent)/* set up for high or low DMA */ err =dma_set_mask_and_coherent (dev,DMA_BIT_MASK (64 )); -if (err) - err =dma_set_mask_and_coherent (dev,DMA_BIT_MASK (32 ));if (err) {dev_err (dev,"DMA configuration failed: 0x%x\n" , err);return err;
Signature · 1 line
2.31.1
Tony Nguyen
maintainerPATCH 8/10 igc: Remove useless DMA-32 fallback configuration
In reply to Tony NguyenFrom: Christophe JAILLET <[email protected]>
As stated in [1], dma_set_mask() with a 64-bit mask never fails if dev->dma_mask is non-NULL.
So, if it fails, the 32 bits case will also fail for the same reason.
So, if dma_set_mask_and_coherent() succeeds, 'pci_using_dac' is known to be 1.
Simplify code and remove some dead code accordingly.
[1]: https://lkml.org/lkml/2021/6/7/398
--- drivers/net/ethernet/intel/igc/igc_main.c | 19 ++++++------------- 1 file changed, 6 insertions(+), 13 deletions(-)
drivers/net/ethernet/intel/igc/igc_main.c +6 -13
@@ -6251,23 +6251,17 @@ static int igc_probe(struct pci_dev *pdev,struct net_device *netdev;struct igc_hw *hw;const struct igc_info *ei = igc_info_tbl[ent->driver_data]; -int err, pci_using_dac; +int err; err =pci_enable_device_mem (pdev);if (err)return err; - pci_using_dac =0 ; err =dma_set_mask_and_coherent (&pdev->dev,DMA_BIT_MASK (64 )); -if (!err) { - pci_using_dac =1 ; - }else { - err =dma_set_mask_and_coherent (&pdev->dev,DMA_BIT_MASK (32 )); -if (err) { -dev_err (&pdev->dev, -"No usable DMA configuration, aborting\n" ); - goto err_dma; - } +if (err) { +dev_err (&pdev->dev, +"No usable DMA configuration, aborting\n" ); + goto err_dma; } err =pci_request_mem_regions (pdev, igc_driver_name);
@@ -6367,8 +6361,7 @@ static int igc_probe(struct pci_dev *pdev, netdev->hw_features |=NETIF_F_HW_VLAN_CTAG_RX ; netdev->hw_features |= netdev->features; -if (pci_using_dac) - netdev->features |=NETIF_F_HIGHDMA ; + netdev->features |=NETIF_F_HIGHDMA ; netdev->vlan_features |= netdev->features |NETIF_F_TSO_MANGLEID ; netdev->mpls_features |=NETIF_F_HW_CSUM ;
Signature · 1 line
2.31.1
Tony Nguyen
maintainerPATCH 9/10 igb: Remove useless DMA-32 fallback configuration
In reply to Tony NguyenFrom: Christophe JAILLET <[email protected]>
As stated in [1], dma_set_mask() with a 64-bit mask never fails if dev->dma_mask is non-NULL.
So, if it fails, the 32 bits case will also fail for the same reason.
So, if dma_set_mask_and_coherent() succeeds, 'pci_using_dac' is known to be 1.
Simplify code and remove some dead code accordingly.
[1]: https://lkml.org/lkml/2021/6/7/398
--- drivers/net/ethernet/intel/igb/igb_main.c | 19 ++++++------------- 1 file changed, 6 insertions(+), 13 deletions(-)
drivers/net/ethernet/intel/igb/igb_main.c +6 -13
@@ -3164,8 +3164,8 @@ static int igb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)s32 ret_val;static int global_quad_port_a;/* global quad port a indication */ const struct e1000_info *ei = igb_info_tbl[ent->driver_data]; -int err, pci_using_dac;u8 part_str[E1000_PBANUM_LENGTH ]; +int err;/* Catch broken hardware that put the wrong VF device ID in * the PCIe SR-IOV capability.
@@ -3180,17 +3180,11 @@ static int igb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)if (err)return err; - pci_using_dac =0 ; err =dma_set_mask_and_coherent (&pdev->dev,DMA_BIT_MASK (64 )); -if (!err) { - pci_using_dac =1 ; - }else { - err =dma_set_mask_and_coherent (&pdev->dev,DMA_BIT_MASK (32 )); -if (err) { -dev_err (&pdev->dev, -"No usable DMA configuration, aborting\n" ); - goto err_dma; - } +if (err) { +dev_err (&pdev->dev, +"No usable DMA configuration, aborting\n" ); + goto err_dma; } err =pci_request_mem_regions (pdev, igb_driver_name);
@@ -3306,8 +3300,7 @@ static int igb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)if (hw->mac.type >= e1000_i350) netdev->hw_features |=NETIF_F_NTUPLE ; -if (pci_using_dac) - netdev->features |=NETIF_F_HIGHDMA ; + netdev->features |=NETIF_F_HIGHDMA ; netdev->vlan_features |= netdev->features |NETIF_F_TSO_MANGLEID ; netdev->mpls_features |=NETIF_F_HW_CSUM ;
Signature · 1 line
2.31.1
Tony Nguyen
maintainerPATCH 10/10 igbvf: Remove useless DMA-32 fallback configuration
In reply to Tony NguyenFrom: Christophe JAILLET <[email protected]>
As stated in [1], dma_set_mask() with a 64-bit mask never fails if dev->dma_mask is non-NULL.
So, if it fails, the 32 bits case will also fail for the same reason.
So, if dma_set_mask_and_coherent() succeeds, 'pci_using_dac' is known to be 1.
Simplify code and remove some dead code accordingly.
[1]: https://lkml.org/lkml/2021/6/7/398
--- drivers/net/ethernet/intel/igbvf/netdev.c | 22 ++++++---------------- 1 file changed, 6 insertions(+), 16 deletions(-)
drivers/net/ethernet/intel/igbvf/netdev.c +6 -16
@@ -2684,25 +2684,18 @@ static int igbvf_probe(struct pci_dev *pdev, const struct pci_device_id *ent)struct igbvf_adapter *adapter;struct e1000_hw *hw;const struct igbvf_info *ei = igbvf_info_tbl[ent->driver_data]; -static int cards_found; -int err, pci_using_dac; +int err; err =pci_enable_device_mem (pdev);if (err)return err; - pci_using_dac =0 ; err =dma_set_mask_and_coherent (&pdev->dev,DMA_BIT_MASK (64 )); -if (!err) { - pci_using_dac =1 ; - }else { - err =dma_set_mask_and_coherent (&pdev->dev,DMA_BIT_MASK (32 )); -if (err) { -dev_err (&pdev->dev, -"No usable DMA configuration, aborting\n" ); - goto err_dma; - } +if (err) { +dev_err (&pdev->dev, +"No usable DMA configuration, aborting\n" ); + goto err_dma; } err =pci_request_regions (pdev, igbvf_driver_name);
@@ -2783,10 +2776,7 @@ static int igbvf_probe(struct pci_dev *pdev, const struct pci_device_id *ent) netdev->hw_features |=NETIF_F_GSO_PARTIAL |IGBVF_GSO_PARTIAL_FEATURES ; - netdev->features = netdev->hw_features; - -if (pci_using_dac) - netdev->features |=NETIF_F_HIGHDMA ; + netdev->features = netdev->hw_features |NETIF_F_HIGHDMA ; netdev->vlan_features |= netdev->features |NETIF_F_TSO_MANGLEID ; netdev->mpls_features |=NETIF_F_HW_CSUM ;
Signature · 1 line
2.31.1
This series was applied to netdev/net-next.git (master) by Tony Nguyen <[email protected]>:
Hello:
This series was applied to netdev/net-next.git (master) by Tony Nguyen <[email protected]>:
Quoted 9 lines · On Thu, 27 Jan 2022 13:52:14 -0800 you wrote:
Christophe Jaillet removes useless DMA-32 fallback calls from applicable Intel drivers and simplifies code as a result of the removal.
The following are changes since commit
e2cf07654efb0fd7bbcb475c6f74be7b5755a8fd:
ptp: replace snprintf withsysfs_emit
and are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue1GbE[...]
Here is the summary with links:
- [net-next,01/10] ixgb: Remove useless DMA-32 fallback configuration
https://git.kernel.org/netdev/net-next/c/64953720a2ba - [net-next,02/10] ixgbe: Remove useless DMA-32 fallback configuration https://git.kernel.org/netdev/net-next/c/4d361c6fd8d4 - [net-next,03/10] ixgbevf: Remove useless DMA-32 fallback configuration https://git.kernel.org/netdev/net-next/c/90b83d013924 - [net-next,04/10] i40e: Remove useless DMA-32 fallback configuration https://git.kernel.org/netdev/net-next/c/10ebc5464e40 - [net-next,05/10] e1000e: Remove useless DMA-32 fallback configuration https://git.kernel.org/netdev/net-next/c/a34a42d87a08 - [net-next,06/10] iavf: Remove useless DMA-32 fallback configuration https://git.kernel.org/netdev/net-next/c/9498d4affd61 - [net-next,07/10] ice: Remove useless DMA-32 fallback configuration https://git.kernel.org/netdev/net-next/c/9c3e54a63263 - [net-next,08/10] igc: Remove useless DMA-32 fallback configuration https://git.kernel.org/netdev/net-next/c/fea89930f2a1 - [net-next,09/10] igb: Remove useless DMA-32 fallback configuration https://git.kernel.org/netdev/net-next/c/f80f4dc3b2c0 - [net-next,10/10] igbvf: Remove useless DMA-32 fallback configuration https://git.kernel.org/netdev/net-next/c/ac9178926649
You are awesome, thank you!
Signature · 2 lines
Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html