Skip to contentSkip to conversation

Revert "arm64: dts: ls1028a-rdb: enable pwm0"

PATCH In review Michael Walle 2 participants 5 messages Jan 15, 2022 – Feb 7, 2022

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/2 Revert "arm64: dts: ls1028a-rdb: enable pwm0"

We need to revert commit 71799672ea24d ("arm64: dts: ls1028a: add flextimer based pwm nodes"). To not break the LS1028A-RDB board dts, we also need to revert this commit.

This reverts commit b2e2d3e02fb60f4d45843ceebef0465c59c8d392.

Fixes b2e2d3e02fb6 ("arm64: dts: ls1028a-rdb: enable pwm0")
---
 arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 4 ----
 1 file changed, 4 deletions(-)
arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts +0 -4
index 68c31cb8eead..6d26b010187c 100644
@@ -286,10 +286,6 @@ &optee {
 	status = "okay";
 };
 
-&pwm0 {
-	status = "okay";
-};
-
 &sai4 {
 	status = "okay";
 };
Signature · 1 line
2.30.2
#1 lore raw

PATCH 2/2 Revert "arm64: dts: ls1028a: add flextimer based pwm nodes"

The changes to the device tree look very wrong. There are now two devices with the same base address: pwm0 and ftm_alarm0. Both are using the Flex Timer Module. It seems like this should either be one driver or and MFD driver. Either way, there should only be one node in the device tree. Revert the offending changes to avoid getting a broken device tree in circulation.

This reverts commit 71799672ea24d2935322d655d2407c1ccd7db9ff.

Fixes 71799672ea24 ("arm64: dts: ls1028a: add flextimer based pwm nodes")

---

Btw, the nodes are also not sorted by the address. Otherwise it should have been spotted easily.

 .../arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 95 -------------------
 1 file changed, 95 deletions(-)
arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +0 -95
index 1ef26cbc79cb..d3cc8cbaf768 100644
@@ -66,13 +66,6 @@ CPU_PW20: cpu-pw20 {
 		};
 	};
 
-	rtc_clk: rtc-clk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <32768>;
-		clock-output-names = "rtc_clk";
-	};
-
 	sysclk: sysclk {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -1245,94 +1238,6 @@ ierb@1f0800000 {
 			reg = <0x01 0xf0800000 0x0 0x10000>;
 		};
 
-		pwm0: pwm@2800000 {
-			compatible = "fsl,vf610-ftm-pwm";
-			#pwm-cells = <3>;
-			reg = <0x0 0x2800000 0x0 0x10000>;
-			clock-names = "ftm_sys", "ftm_ext",
-				      "ftm_fix", "ftm_cnt_clk_en";
-			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
-				 <&rtc_clk>, <&clockgen 4 1>;
-			status = "disabled";
-		};
-
-		pwm1: pwm@2810000 {
-			compatible = "fsl,vf610-ftm-pwm";
-			#pwm-cells = <3>;
-			reg = <0x0 0x2810000 0x0 0x10000>;
-			clock-names = "ftm_sys", "ftm_ext",
-				      "ftm_fix", "ftm_cnt_clk_en";
-			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
-				 <&rtc_clk>, <&clockgen 4 1>;
-			status = "disabled";
-		};
-
-		pwm2: pwm@2820000 {
-			compatible = "fsl,vf610-ftm-pwm";
-			#pwm-cells = <3>;
-			reg = <0x0 0x2820000 0x0 0x10000>;
-			clock-names = "ftm_sys", "ftm_ext",
-				      "ftm_fix", "ftm_cnt_clk_en";
-			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
-				 <&rtc_clk>, <&clockgen 4 1>;
-			status = "disabled";
-		};
-
-		pwm3: pwm@2830000 {
-			compatible = "fsl,vf610-ftm-pwm";
-			#pwm-cells = <3>;
-			reg = <0x0 0x2830000 0x0 0x10000>;
-			clock-names = "ftm_sys", "ftm_ext",
-				      "ftm_fix", "ftm_cnt_clk_en";
-			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
-				 <&rtc_clk>, <&clockgen 4 1>;
-			status = "disabled";
-		};
-
-		pwm4: pwm@2840000 {
-			compatible = "fsl,vf610-ftm-pwm";
-			#pwm-cells = <3>;
-			reg = <0x0 0x2840000 0x0 0x10000>;
-			clock-names = "ftm_sys", "ftm_ext",
-				      "ftm_fix", "ftm_cnt_clk_en";
-			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
-				 <&rtc_clk>, <&clockgen 4 1>;
-			status = "disabled";
-		};
-
-		pwm5: pwm@2850000 {
-			compatible = "fsl,vf610-ftm-pwm";
-			#pwm-cells = <3>;
-			reg = <0x0 0x2850000 0x0 0x10000>;
-			clock-names = "ftm_sys", "ftm_ext",
-				      "ftm_fix", "ftm_cnt_clk_en";
-			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
-				 <&rtc_clk>, <&clockgen 4 1>;
-			status = "disabled";
-		};
-
-		pwm6: pwm@2860000 {
-			compatible = "fsl,vf610-ftm-pwm";
-			#pwm-cells = <3>;
-			reg = <0x0 0x2860000 0x0 0x10000>;
-			clock-names = "ftm_sys", "ftm_ext",
-				      "ftm_fix", "ftm_cnt_clk_en";
-			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
-				 <&rtc_clk>, <&clockgen 4 1>;
-			status = "disabled";
-		};
-
-		pwm7: pwm@2870000 {
-			compatible = "fsl,vf610-ftm-pwm";
-			#pwm-cells = <3>;
-			reg = <0x0 0x2870000 0x0 0x10000>;
-			clock-names = "ftm_sys", "ftm_ext",
-				      "ftm_fix", "ftm_cnt_clk_en";
-			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
-				 <&rtc_clk>, <&clockgen 4 1>;
-			status = "disabled";
-		};
-
 		rcpm: power-controller@1e34040 {
 			compatible = "fsl,ls1028a-rcpm", "fsl,qoriq-rcpm-2.1+";
 			reg = <0x0 0x1e34040 0x0 0x1c>;
Signature · 1 line
2.30.2
#2 lore raw

Re: [PATCH 2/2] Revert "arm64: dts: ls1028a: add flextimer based pwm nodes"

Quoted 6 lines · Michael Walle

The changes to the device tree look very wrong. There are now two devices with the same base address: pwm0 and ftm_alarm0. Both are using the Flex Timer Module. It seems like this should either be one driver or and MFD driver. Either way, there should only be one node in the device tree. Revert the offending changes to avoid getting a broken device tree in circulation.

Why not just fix the conflicting nodes?

Shawn

Quoted 129 lines

This reverts commit 71799672ea24d2935322d655d2407c1ccd7db9ff.

Fixes 71799672ea24 ("arm64: dts: ls1028a: add flextimer based pwm nodes")

---

Btw, the nodes are also not sorted by the address. Otherwise it should have been spotted easily.

 .../arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 95 -------------------
 1 file changed, 95 deletions(-)
arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +0 -95
index 1ef26cbc79cb..d3cc8cbaf768 100644
@@ -66,13 +66,6 @@ CPU_PW20: cpu-pw20 {
 		};
 	};
 
-	rtc_clk: rtc-clk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <32768>;
-		clock-output-names = "rtc_clk";
-	};
-
 	sysclk: sysclk {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -1245,94 +1238,6 @@ ierb@1f0800000 {
 			reg = <0x01 0xf0800000 0x0 0x10000>;
 		};
 
-		pwm0: pwm@2800000 {
-			compatible = "fsl,vf610-ftm-pwm";
-			#pwm-cells = <3>;
-			reg = <0x0 0x2800000 0x0 0x10000>;
-			clock-names = "ftm_sys", "ftm_ext",
-				      "ftm_fix", "ftm_cnt_clk_en";
-			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
-				 <&rtc_clk>, <&clockgen 4 1>;
-			status = "disabled";
-		};
-
-		pwm1: pwm@2810000 {
-			compatible = "fsl,vf610-ftm-pwm";
-			#pwm-cells = <3>;
-			reg = <0x0 0x2810000 0x0 0x10000>;
-			clock-names = "ftm_sys", "ftm_ext",
-				      "ftm_fix", "ftm_cnt_clk_en";
-			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
-				 <&rtc_clk>, <&clockgen 4 1>;
-			status = "disabled";
-		};
-
-		pwm2: pwm@2820000 {
-			compatible = "fsl,vf610-ftm-pwm";
-			#pwm-cells = <3>;
-			reg = <0x0 0x2820000 0x0 0x10000>;
-			clock-names = "ftm_sys", "ftm_ext",
-				      "ftm_fix", "ftm_cnt_clk_en";
-			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
-				 <&rtc_clk>, <&clockgen 4 1>;
-			status = "disabled";
-		};
-
-		pwm3: pwm@2830000 {
-			compatible = "fsl,vf610-ftm-pwm";
-			#pwm-cells = <3>;
-			reg = <0x0 0x2830000 0x0 0x10000>;
-			clock-names = "ftm_sys", "ftm_ext",
-				      "ftm_fix", "ftm_cnt_clk_en";
-			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
-				 <&rtc_clk>, <&clockgen 4 1>;
-			status = "disabled";
-		};
-
-		pwm4: pwm@2840000 {
-			compatible = "fsl,vf610-ftm-pwm";
-			#pwm-cells = <3>;
-			reg = <0x0 0x2840000 0x0 0x10000>;
-			clock-names = "ftm_sys", "ftm_ext",
-				      "ftm_fix", "ftm_cnt_clk_en";
-			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
-				 <&rtc_clk>, <&clockgen 4 1>;
-			status = "disabled";
-		};
-
-		pwm5: pwm@2850000 {
-			compatible = "fsl,vf610-ftm-pwm";
-			#pwm-cells = <3>;
-			reg = <0x0 0x2850000 0x0 0x10000>;
-			clock-names = "ftm_sys", "ftm_ext",
-				      "ftm_fix", "ftm_cnt_clk_en";
-			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
-				 <&rtc_clk>, <&clockgen 4 1>;
-			status = "disabled";
-		};
-
-		pwm6: pwm@2860000 {
-			compatible = "fsl,vf610-ftm-pwm";
-			#pwm-cells = <3>;
-			reg = <0x0 0x2860000 0x0 0x10000>;
-			clock-names = "ftm_sys", "ftm_ext",
-				      "ftm_fix", "ftm_cnt_clk_en";
-			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
-				 <&rtc_clk>, <&clockgen 4 1>;
-			status = "disabled";
-		};
-
-		pwm7: pwm@2870000 {
-			compatible = "fsl,vf610-ftm-pwm";
-			#pwm-cells = <3>;
-			reg = <0x0 0x2870000 0x0 0x10000>;
-			clock-names = "ftm_sys", "ftm_ext",
-				      "ftm_fix", "ftm_cnt_clk_en";
-			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
-				 <&rtc_clk>, <&clockgen 4 1>;
-			status = "disabled";
-		};
-
 		rcpm: power-controller@1e34040 {
 			compatible = "fsl,ls1028a-rcpm", "fsl,qoriq-rcpm-2.1+";
 			reg = <0x0 0x1e34040 0x0 0x1c>;
Signature · 1 line
2.30.2
#3 lore raw

Re: [PATCH 2/2] Revert "arm64: dts: ls1028a: add flextimer based pwm nodes"

Am 2022-01-29 06:42, schrieb Shawn Guo:

Quoted 9 lines · Michael Walle
Quoted 6 lines

The changes to the device tree look very wrong. There are now two devices with the same base address: pwm0 and ftm_alarm0. Both are using the Flex Timer Module. It seems like this should either be one driver or and MFD driver. Either way, there should only be one node in the device tree. Revert the offending changes to avoid getting a broken device tree in circulation.

Why not just fix the conflicting nodes?

And how would you fix it? There are two conflicting drivers. Like I said, maybe it should be an MFD driver, see for example Documentation/devicetree/bindings/mfd/atmel-flexcom.txt, which also have a common block which you can switch between different modes. But that would mean a lot of work which I don't think will happen until the next merge window, let alone that this is not a bugfix.

Therefore, the only sensible thing is to revert the latest changes, so that you don't have a broken device tree released with 5.17 and work on a proper support for the next release.

And TBH, I'd expect that NXP will fix this.

-michael

#4 lore raw

Re: [PATCH 2/2] Revert "arm64: dts: ls1028a: add flextimer based pwm nodes"

Am 2022-01-29 11:12, schrieb Michael Walle:

Quoted 18 lines

Am 2022-01-29 06:42, schrieb Shawn Guo:

Quoted 9 lines · Michael Walle
Quoted 6 lines

The changes to the device tree look very wrong. There are now two devices with the same base address: pwm0 and ftm_alarm0. Both are using the Flex Timer Module. It seems like this should either be one driver or and MFD driver. Either way, there should only be one node in the device tree. Revert the offending changes to avoid getting a broken device tree in circulation.

Why not just fix the conflicting nodes?

And how would you fix it? There are two conflicting drivers. Like I said, maybe it should be an MFD driver, see for example Documentation/devicetree/bindings/mfd/atmel-flexcom.txt, which also have a common block which you can switch between different modes. But that would mean a lot of work which I don't think will happen until the next merge window, let alone that this is not a bugfix.

Quoted 5 lines

Therefore, the only sensible thing is to revert the latest changes, so that you don't have a broken device tree released with 5.17 and work on a proper support for the next release.

And TBH, I'd expect that NXP will fix this.

I've just asked Rob and it is ok to have two nodes which have the same reg on the same parent if one (or both) are disabled.

So you can drop this patch, but someone should really sort these nodes by address.

I still think it would have been nicer the one proper driver for the flextimer.

-michael

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel