arm64: dts: rockchip: fix vcc3v3_lcd{0,1}_n regulators in rk3568-evb1-10
Subsystems (2)
PATCH 1/2 arm64: dts: rockchip: fix vcc3v3_lcd{0,1}_n regulators in rk3568-evb1-10
The voltages VCC3V3_LCD{0,1} can be enabled with the pins GPIO0_C7 and GPIO0_C5, respectively. This patch modifies the device tree in order to reflect this.
Signed-off-by Michael Riesch <[email protected]>
--- .../boot/dts/rockchip/rk3568-evb1-v10.dts | 25 +++++++++++++++++-- 1 file changed, 23 insertions(+), 2 deletions(-)
arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts +23 -2
@@ -56,7 +56,13 @@ vcc5v0_sys: vcc5v0-sys { vcc3v3_lcd0_n: vcc3v3-lcd0-n { compatible = "regulator-fixed"; regulator-name = "vcc3v3_lcd0_n"; - regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>; + vin-supply = <&vcc3v3_sys>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc3v3_lcd0_n_en>; regulator-state-mem { regulator-off-in-suspend;
@@ -66,7 +72,13 @@ regulator-state-mem { vcc3v3_lcd1_n: vcc3v3-lcd1-n { compatible = "regulator-fixed"; regulator-name = "vcc3v3_lcd1_n"; - regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>; + vin-supply = <&vcc3v3_sys>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc3v3_lcd1_n_en>; regulator-state-mem { regulator-off-in-suspend;
@@ -339,6 +351,15 @@ rgmii_phy1: ethernet-phy@0 { }; &pinctrl { + display { + vcc3v3_lcd0_n_en: vcc3v3_lcd0_n_en { + rockchip,pins = <0 RK_PC7 0 &pcfg_pull_none>; + }; + vcc3v3_lcd1_n_en: vcc3v3_lcd1_n_en { + rockchip,pins = <0 RK_PC5 0 &pcfg_pull_none>; + }; + }; + pmic { pmic_int: pmic_int { rockchip,pins =
Signature · 1 line
2.30.2
PATCH 2/2 arm64: dts: rockchip: add the touchscreen controller to rk3568-evb1-v10
The Rockchip RK3568 EVB1 comes with a mounted touch display featuring a Goodix GT1158 touch controller (according to the product ID register).
Signed-off-by Michael Riesch <[email protected]>
--- .../boot/dts/rockchip/rk3568-evb1-v10.dts | 26 +++++++++++++++++++ 1 file changed, 26 insertions(+)
arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts +26 -0
@@ -330,6 +330,23 @@ regulator-state-mem { }; }; +&i2c1 { + status = "okay"; + + touchscreen0: goodix@14 { + compatible = "goodix,gt1151"; + reg = <0x14>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB5 IRQ_TYPE_EDGE_FALLING>; + AVDD28-supply = <&vcc3v3_lcd0_n>; + irq-gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&touch_int &touch_rst>; + reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; + VDDIO-supply = <&vcc3v3_lcd0_n>; + }; +}; + &mdio0 { rgmii_phy0: ethernet-phy@0 { compatible = "ethernet-phy-ieee802.3-c22";
@@ -366,6 +383,15 @@ pmic_int: pmic_int { <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; }; }; + + touchscreen { + touch_int: touch_int { + rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + touch_rst: touch_rst { + rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; }; &pmu_io_domains {
Signature · 1 line
2.30.2
Quoted 3 lines · Michael Riesch
The voltages VCC3V3_LCD{0,1} can be enabled with the pins
GPIO0_C7andGPIO0_C5, respectively. This patch modifies the device tree in order to reflect this.
Applied, thanks!
[1/2] arm64: dts: rockchip: fix vcc3v3_lcd{0,1}_n regulators in rk3568-evb1-10
commit: 9ade1ab4d85f5fc31a5d6cf5147702ed5c1b5b10
[2/2] arm64: dts: rockchip: add the touchscreen controller to rk3568-evb1-v10
commit: 922237a6c211d9fe46b5dfb56307872cdced386dBest regards,
Signature · 1 line
Heiko Stuebner <[email protected]>