arm64: dts: rockchip: add the i2s3_2ch node to rk356x
Subsystems (2)
PATCH 1/1 arm64: dts: rockchip: add the i2s3_2ch node to rk356x
Add the two-channel I2S controller I2S3_2CH to the rk356x device tree.
Signed-off-by Michael Riesch <[email protected]>
---
Tested the I2S input on a modified RK3568 EVB1.
arch/arm64/boot/dts/rockchip/rk356x.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
arch/arm64/boot/dts/rockchip/rk356x.dtsi +16 -0
@@ -651,6 +651,22 @@ &i2s1m0_sdo0 &i2s1m0_sdo1 status = "disabled"; }; + i2s3_2ch: i2s@fe430000 { + compatible = "rockchip,rk3568-i2s-tdm"; + reg = <0x0 0xfe430000 0x0 0x1000>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru MCLK_I2S3_2CH_TX>, <&cru MCLK_I2S3_2CH_RX>, + <&cru HCLK_I2S3_2CH>; + clock-names = "mclk_tx", "mclk_rx", "hclk"; + dmas = <&dmac1 6>, <&dmac1 7>; + dma-names = "tx", "rx"; + resets = <&cru SRST_M_I2S3_2CH_TX>, <&cru SRST_M_I2S3_2CH_RX>; + reset-names = "tx-m", "rx-m"; + rockchip,grf = <&grf>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + dmac0: dmac@fe530000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x0 0xfe530000 0x0 0x4000>;
Signature · 1 line
2.30.2
Quoted 1 line · Michael Riesch
Add the two-channel I2S controller
I2S3_2CHto the rk356x device tree.
Applied, thanks!
[1/1] arm64: dts: rockchip: add the i2s3_2ch node to rk356x
Best regards,
Signature · 1 line
Heiko Stuebner <[email protected]>