Skip to contentSkip to conversation

U-Boot v2022.04-rc1 released

ANN Tom Rini 5 participants 14 messages Jan 31, 2022 – Mar 30, 2022

lore
Share & tools
lore

Tom Rini

author
#0 lore raw

Hey all,

It's release day and so here's v2022.04-rc1. While there's much in here that needed to come in, there's a few big things outstanding, including but not limited to i.MX and layerscape syncs and further sunxi changes.

In terms of a changelog,
git log --merges v2022.01..v2022.04-rc1
contains what I've pulled but as always, better PR messages and tags will provide better results here.

So we're now looking at regular releases every other Monday, and with final release on April 4th, 2022. Thanks all!

Signature · 1 line
Tom
#1 lore raw
Quoted 6 lines · Tom Rini

Hey all,

It's release day and so here's v2022.04-rc1. While there's much in here that needed to come in, there's a few big things outstanding, including but not limited to i.MX and layerscape syncs and further sunxi changes.

Quoted 7 lines

In terms of a changelog,
git log --merges v2022.01..v2022.04-rc1
contains what I've pulled but as always, better PR messages and tags will provide better results here.

So we're now looking at regular releases every other Monday, and with final release on April 4th, 2022. Thanks all!

As usual I haven't kept an eye for a while and Edison is completely broken. v2021.10 works, this one doesn't.

The symptoms on all kernels I tried (v5.17-rc3, v5.16, v5.15) is that:

[    0.852822] PCI host bridge to bus 0000:00
[    0.853684] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.854680] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
[    0.855679] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.856700] BUG: kernel NULL pointer dereference, address: 0000000000000000
[    0.857666] #PF: supervisor read access in kernel mode
[    0.857666] #PF: error_code(0x0000) - not-present page
[    0.857666] PGD 0 P4D 0
[    0.857666] Oops: 0000 [#1] SMP PTI
[    0.857666] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.15.0+ #23
[    0.857666] Hardware name: Intel Corporation Merrifield/BODEGA BAY, BIOS 542 2015.01.21:18.19.48
[    0.857666] RIP: 0010:pci_read+0x47/0x80

...

Bisection started...

Simon, can you prioritize setting up Edison to make it available for tests?

Signature · 2 lines
With Best Regards,
Andy Shevchenko
#2 lore raw
Quoted 33 lines · Andy Shevchenko
Quoted 6 lines · Tom Rini

Hey all,

It's release day and so here's v2022.04-rc1. While there's much in here that needed to come in, there's a few big things outstanding, including but not limited to i.MX and layerscape syncs and further sunxi changes.

Quoted 7 lines

In terms of a changelog,
git log --merges v2022.01..v2022.04-rc1
contains what I've pulled but as always, better PR messages and tags will provide better results here.

So we're now looking at regular releases every other Monday, and with final release on April 4th, 2022. Thanks all!

As usual I haven't kept an eye for a while and Edison is completely broken. v2021.10 works, this one doesn't.

The symptoms on all kernels I tried (v5.17-rc3, v5.16, v5.15) is that:

[    0.852822] PCI host bridge to bus 0000:00
[    0.853684] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.854680] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
[    0.855679] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.856700] BUG: kernel NULL pointer dereference, address: 0000000000000000
[    0.857666] #PF: supervisor read access in kernel mode
[    0.857666] #PF: error_code(0x0000) - not-present page
[    0.857666] PGD 0 P4D 0
[    0.857666] Oops: 0000 [#1] SMP PTI
[    0.857666] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.15.0+ #23
[    0.857666] Hardware name: Intel Corporation Merrifield/BODEGA BAY, BIOS 542 2015.01.21:18.19.48
[    0.857666] RIP: 0010:pci_read+0x47/0x80
Quoted 3 lines

...

Bisection started...

u-boot((379d3c1fd6aa...)|BISECTING)$ git bisect log
git bisect start
# good: [d637294e264adfeb29f390dfc393106fd4d41b17] Prepare v2022.01 git bisect good d637294e264adfeb29f390dfc393106fd4d41b17
# bad: [df887a045a1d726bbd654ef266e5cbe8cc0c2db3] Prepare v2022.04-rc1 git bisect bad df887a045a1d726bbd654ef266e5cbe8cc0c2db3
# good: [25711b07ca1dcf73dc41b45ca040dadbcff0fa08] Merge tag 'dm-pull-13jan22' of https://source.denx.de/u-boot/c
ustodians/u-boot-dm
git bisect good 25711b07ca1dcf73dc41b45ca040dadbcff0fa08
# good: [16f4d36c7b8b6aeb0374485acb91afee795ccfc9] arm: dts:
rz-g2-beacon-u-boot: Enable pinmux for QSPI
git bisect good 16f4d36c7b8b6aeb0374485acb91afee795ccfc9
# bad: [e1b7e4ddb6b1a1d0b416facbd0f576dde9c404e6] binman: Add a bintool implementation for mkimage
git bisect bad e1b7e4ddb6b1a1d0b416facbd0f576dde9c404e6
# good: [6146cd62aedc4849fec66f10ab0aa57f1dc64b8e] Merge branch '2022-01-24-assorted-updates'
git bisect good 6146cd62aedc4849fec66f10ab0aa57f1dc64b8e
# bad: [9d2adca8c3e8d195fa4be5acc8c6dfe14933e826] x86: Move acpi_get_rsdp_addr() ACPI tables to the writer
git bisect bad 9d2adca8c3e8d195fa4be5acc8c6dfe14933e826
# good: [31c27eb83084e77921b82e7e631ecd6ae8b904da] x86: Use the ACPI table writer
git bisect good 31c27eb83084e77921b82e7e631ecd6ae8b904da
# bad: [d953137526cce48002ef1e313592d28b66cc9c48] x86: Move SSDT table to a writer function
git bisect bad d953137526cce48002ef1e313592d28b66cc9c48
# good: [eacb6d0ba205cae472c46a974fb16fcd783680b1] x86: Move DSDT table to a writer function
git bisect good eacb6d0ba205cae472c46a974fb16fcd783680b1
# good: [138d7ece70e7835ffd120da254af1abdb953e6da] x86: Move FADT table to a writer function
git bisect good 138d7ece70e7835ffd120da254af1abdb953e6da
# bad: [379d3c1fd6aa490b1ad5697525cfc89b615cf25a] x86: Move FACP table into separate functions
git bisect bad 379d3c1fd6aa490b1ad5697525cfc89b615cf25a

# first bad commit: [379d3c1fd6aa490b1ad5697525cfc89b615cf25a] x86:
Move FACP table into separate functions
u-boot((379d3c1fd6aa...)|BISECTING)$

Irony is that I have reviewed it, but that time I was busy and couldn't test.

Quoted 1 line

Simon, can you prioritize setting up Edison to make it available for tests?

Signature · 2 lines
With Best Regards,
Andy Shevchenko
#3 lore raw
Quoted 77 lines · Andy Shevchenko
Quoted 33 lines · Andy Shevchenko
Quoted 6 lines · Tom Rini

Hey all,

It's release day and so here's v2022.04-rc1. While there's much in here that needed to come in, there's a few big things outstanding, including but not limited to i.MX and layerscape syncs and further sunxi changes.

Quoted 7 lines

In terms of a changelog,
git log --merges v2022.01..v2022.04-rc1
contains what I've pulled but as always, better PR messages and tags will provide better results here.

So we're now looking at regular releases every other Monday, and with final release on April 4th, 2022. Thanks all!

As usual I haven't kept an eye for a while and Edison is completely broken. v2021.10 works, this one doesn't.

The symptoms on all kernels I tried (v5.17-rc3, v5.16, v5.15) is that:

[    0.852822] PCI host bridge to bus 0000:00
[    0.853684] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.854680] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
[    0.855679] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.856700] BUG: kernel NULL pointer dereference, address: 0000000000000000
[    0.857666] #PF: supervisor read access in kernel mode
[    0.857666] #PF: error_code(0x0000) - not-present page
[    0.857666] PGD 0 P4D 0
[    0.857666] Oops: 0000 [#1] SMP PTI
[    0.857666] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.15.0+ #23
[    0.857666] Hardware name: Intel Corporation Merrifield/BODEGA BAY, BIOS 542 2015.01.21:18.19.48
[    0.857666] RIP: 0010:pci_read+0x47/0x80
Quoted 3 lines

...

Bisection started...

u-boot((379d3c1fd6aa...)|BISECTING)$ git bisect log
git bisect start
# good: [d637294e264adfeb29f390dfc393106fd4d41b17] Prepare v2022.01 git bisect good d637294e264adfeb29f390dfc393106fd4d41b17
# bad: [df887a045a1d726bbd654ef266e5cbe8cc0c2db3] Prepare v2022.04-rc1 git bisect bad df887a045a1d726bbd654ef266e5cbe8cc0c2db3
# good: [25711b07ca1dcf73dc41b45ca040dadbcff0fa08] Merge tag 'dm-pull-13jan22' of https://source.denx.de/u-boot/c
ustodians/u-boot-dm
git bisect good 25711b07ca1dcf73dc41b45ca040dadbcff0fa08
# good: [16f4d36c7b8b6aeb0374485acb91afee795ccfc9] arm: dts:
rz-g2-beacon-u-boot: Enable pinmux for QSPI
git bisect good 16f4d36c7b8b6aeb0374485acb91afee795ccfc9
# bad: [e1b7e4ddb6b1a1d0b416facbd0f576dde9c404e6] binman: Add a bintool implementation for mkimage
git bisect bad e1b7e4ddb6b1a1d0b416facbd0f576dde9c404e6
# good: [6146cd62aedc4849fec66f10ab0aa57f1dc64b8e] Merge branch '2022-01-24-assorted-updates'
git bisect good 6146cd62aedc4849fec66f10ab0aa57f1dc64b8e
# bad: [9d2adca8c3e8d195fa4be5acc8c6dfe14933e826] x86: Move acpi_get_rsdp_addr() ACPI tables to the writer
git bisect bad 9d2adca8c3e8d195fa4be5acc8c6dfe14933e826
# good: [31c27eb83084e77921b82e7e631ecd6ae8b904da] x86: Use the ACPI table writer
git bisect good 31c27eb83084e77921b82e7e631ecd6ae8b904da
# bad: [d953137526cce48002ef1e313592d28b66cc9c48] x86: Move SSDT table to a writer function
git bisect bad d953137526cce48002ef1e313592d28b66cc9c48
# good: [eacb6d0ba205cae472c46a974fb16fcd783680b1] x86: Move DSDT table to a writer function
git bisect good eacb6d0ba205cae472c46a974fb16fcd783680b1
# good: [138d7ece70e7835ffd120da254af1abdb953e6da] x86: Move FADT table to a writer function
git bisect good 138d7ece70e7835ffd120da254af1abdb953e6da
# bad: [379d3c1fd6aa490b1ad5697525cfc89b615cf25a] x86: Move FACP table into separate functions
git bisect bad 379d3c1fd6aa490b1ad5697525cfc89b615cf25a

Quoted 3 lines
# first bad commit: [379d3c1fd6aa490b1ad5697525cfc89b615cf25a] x86:
Move FACP table into separate functions
u-boot((379d3c1fd6aa...)|BISECTING)$

For the record, these two
acpi: Move MCFG implementation to common lib
arch: x86: lib: acpi_table: Fix MCFG entries

do not help.

Quoted 3 lines

Irony is that I have reviewed it, but that time I was busy and couldn't test.

Quoted 1 line

Simon, can you prioritize setting up Edison to make it available for tests?

So, I'm open to testing any other suggestions.

Signature · 2 lines
With Best Regards,
Andy Shevchenko
#4 lore raw
Quoted 5 lines · Andy Shevchenko
Quoted 3 lines · Andy Shevchenko
Quoted 1 line · Andy Shevchenko

On Mon, Jan 31, 2022 at 05:59:30PM -0500, Tom Rini wrote:

...

Quoted 9 lines
Quoted 4 lines

git bisect bad 379d3c1fd6aa490b1ad5697525cfc89b615cf25a

# first bad commit: [379d3c1fd6aa490b1ad5697525cfc89b615cf25a] x86:
Move FACP table into separate functions
u-boot((379d3c1fd6aa...)|BISECTING)$

For the record, these two
acpi: Move MCFG implementation to common lib
arch: x86: lib: acpi_table: Fix MCFG entries

Quoted 7 lines

do not help.

Quoted 3 lines

Irony is that I have reviewed it, but that time I was busy and couldn't test.

Quoted 1 line

Simon, can you prioritize setting up Edison to make it available for tests?

So, I'm open to testing any other suggestions.

Meanwhile I will try to revert and if it works and no other solution comes, I will send it out.

Signature · 2 lines
With Best Regards,
Andy Shevchenko
#5 lore raw
Quoted 21 lines · Andy Shevchenko
Quoted 5 lines · Andy Shevchenko
Quoted 3 lines · Andy Shevchenko
Quoted 1 line · Andy Shevchenko

On Mon, Jan 31, 2022 at 05:59:30PM -0500, Tom Rini wrote:

...

Quoted 11 lines
Quoted 4 lines

git bisect bad 379d3c1fd6aa490b1ad5697525cfc89b615cf25a

# first bad commit: [379d3c1fd6aa490b1ad5697525cfc89b615cf25a] x86:
Move FACP table into separate functions
u-boot((379d3c1fd6aa...)|BISECTING)$

For the record, these two
acpi: Move MCFG implementation to common lib
arch: x86: lib: acpi_table: Fix MCFG entries

do not help.

Quoted 8 lines
Quoted 5 lines
Quoted 3 lines

Irony is that I have reviewed it, but that time I was busy and couldn't test.

Quoted 1 line

Simon, can you prioritize setting up Edison to make it available for tests?

So, I'm open to testing any other suggestions.

Meanwhile I will try to revert and if it works and no other solution comes, I will send it out.

Revert has been sent.

Signature · 2 lines
With Best Regards,
Andy Shevchenko
#6 lore raw
In reply to Andy Shevchenko

Hi Andy,

Quoted 33 lines · Andy Shevchenko
Quoted 6 lines · Tom Rini

Hey all,

It's release day and so here's v2022.04-rc1. While there's much in here that needed to come in, there's a few big things outstanding, including but not limited to i.MX and layerscape syncs and further sunxi changes.

Quoted 7 lines

In terms of a changelog,
git log --merges v2022.01..v2022.04-rc1
contains what I've pulled but as always, better PR messages and tags will provide better results here.

So we're now looking at regular releases every other Monday, and with final release on April 4th, 2022. Thanks all!

As usual I haven't kept an eye for a while and Edison is completely broken. v2021.10 works, this one doesn't.

The symptoms on all kernels I tried (v5.17-rc3, v5.16, v5.15) is that:

[    0.852822] PCI host bridge to bus 0000:00
[    0.853684] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.854680] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
[    0.855679] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.856700] BUG: kernel NULL pointer dereference, address: 0000000000000000
[    0.857666] #PF: supervisor read access in kernel mode
[    0.857666] #PF: error_code(0x0000) - not-present page
[    0.857666] PGD 0 P4D 0
[    0.857666] Oops: 0000 [#1] SMP PTI
[    0.857666] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.15.0+ #23
[    0.857666] Hardware name: Intel Corporation Merrifield/BODEGA BAY, BIOS 542 2015.01.21:18.19.48
[    0.857666] RIP: 0010:pci_read+0x47/0x80
Quoted 5 lines

...

Bisection started...

Simon, can you prioritize setting up Edison to make it available for tests?

I did have one set up but it broke. I got a second one and made a start, but didn't finish it. Edison has a somewhat painful

FWIW here is my tboot flash script for Edison:

    def flash_edison(self, repo):
        vid = 0x8086
        pid = 0xe005
        expect = "%04x:%04x" % (vid, pid)
        self.wait_for_dfu(expect)
        u_boot = os.path.join(repo._local_str(), "u-boot-edison.img")
        bindir = self.usbboot_xfstk_dir
        self.host.exec0(
            "xfstk-dldr-solo", "--gpflags", "0x80000007",
            "--osimage", u_boot,
            "--fwdnx", os.path.join(bindir, "edison_dnx_fwr.bin"),
            "--fwimage", os.path.join(bindir, "edison_ifwi-dbg-00.bin"),
            "--osdnx", os.path.join(bindir, "edison_dnx_osr.bin"))

Regards,
Simon

#7 lore raw
Quoted 3 lines · Simon Glass
Quoted 1 line · Andy Shevchenko

On Mon, Jan 31, 2022 at 05:59:30PM -0500, Tom Rini wrote:

...

Quoted 1 line

FWIW here is my tboot flash script for Edison:

This is rather unbriking script, DFU (luckily) works

Quoted 5 lines
    def flash_edison(self, repo):
        vid = 0x8086
        pid = 0xe005
        expect = "%04x:%04x" % (vid, pid)
        self.wait_for_dfu(expect)
Quoted 8 lines
        u_boot = os.path.join(repo._local_str(), "u-boot-edison.img")
        bindir = self.usbboot_xfstk_dir
        self.host.exec0(
            "xfstk-dldr-solo", "--gpflags", "0x80000007",
            "--osimage", u_boot,
            "--fwdnx", os.path.join(bindir, "edison_dnx_fwr.bin"),
            "--fwimage", os.path.join(bindir, "edison_ifwi-dbg-00.bin"),
            "--osdnx", os.path.join(bindir, "edison_dnx_osr.bin"))

To the topic, any suggestions on how to fix the current U-Boot regression?

Signature · 2 lines
With Best Regards,
Andy Shevchenko
#8 lore raw

Hi Andy,

Quoted 11 lines · Andy Shevchenko
Quoted 3 lines · Simon Glass
Quoted 1 line · Andy Shevchenko

On Mon, Jan 31, 2022 at 05:59:30PM -0500, Tom Rini wrote:

...

Quoted 1 line

FWIW here is my tboot flash script for Edison:

This is rather unbriking script, DFU (luckily) works

Not if it is bricked: :-) I need something that always works.

Quoted 15 lines
Quoted 14 lines
    def flash_edison(self, repo):
        vid = 0x8086
        pid = 0xe005
        expect = "%04x:%04x" % (vid, pid)
        self.wait_for_dfu(expect)
        u_boot = os.path.join(repo._local_str(), "u-boot-edison.img")
        bindir = self.usbboot_xfstk_dir
        self.host.exec0(
            "xfstk-dldr-solo", "--gpflags", "0x80000007",
            "--osimage", u_boot,
            "--fwdnx", os.path.join(bindir, "edison_dnx_fwr.bin"),
            "--fwimage", os.path.join(bindir, "edison_ifwi-dbg-00.bin"),
            "--osdnx", os.path.join(bindir, "edison_dnx_osr.bin"))
Quoted 1 line

To the topic, any suggestions on how to fix the current U-Boot regression?

The easiest thing is to use 'acpi list' and 'acpi dump facp' etc. to see what is different between the two commits. My testing was on coral and minnowmax and I must have missed it. We don't actually have any test coverage on the board-specific code.

Regards,
SImon

#9 lore raw
Quoted 29 lines · Simon Glass
Quoted 10 lines · Andy Shevchenko
Quoted 3 lines · Simon Glass
Quoted 1 line · Andy Shevchenko

On Mon, Jan 31, 2022 at 05:59:30PM -0500, Tom Rini wrote:

...

Quoted 1 line

FWIW here is my tboot flash script for Edison:

This is rather unbriking script, DFU (luckily) works

Not if it is bricked: :-) I need something that always works.

Quoted 15 lines
Quoted 14 lines
    def flash_edison(self, repo):
        vid = 0x8086
        pid = 0xe005
        expect = "%04x:%04x" % (vid, pid)
        self.wait_for_dfu(expect)
        u_boot = os.path.join(repo._local_str(), "u-boot-edison.img")
        bindir = self.usbboot_xfstk_dir
        self.host.exec0(
            "xfstk-dldr-solo", "--gpflags", "0x80000007",
            "--osimage", u_boot,
            "--fwdnx", os.path.join(bindir, "edison_dnx_fwr.bin"),
            "--fwimage", os.path.join(bindir, "edison_ifwi-dbg-00.bin"),
            "--osdnx", os.path.join(bindir, "edison_dnx_osr.bin"))
Quoted 6 lines
Quoted 1 line

To the topic, any suggestions on how to fix the current U-Boot regression?

The easiest thing is to use 'acpi list' and 'acpi dump facp' etc. to see what is different between the two commits. My testing was on coral and minnowmax and I must have missed it. We don't actually have any test coverage on the board-specific code.

=> acpi dump facp
Table 'FACP' not found

This explains I believe everything.

Signature · 2 lines
With Best Regards,
Andy Shevchenko
#10 lore raw
Quoted 37 lines · Andy Shevchenko
Quoted 29 lines · Simon Glass
Quoted 10 lines · Andy Shevchenko
Quoted 3 lines · Simon Glass
Quoted 1 line · Andy Shevchenko

On Mon, Jan 31, 2022 at 05:59:30PM -0500, Tom Rini wrote:

...

Quoted 1 line

FWIW here is my tboot flash script for Edison:

This is rather unbriking script, DFU (luckily) works

Not if it is bricked: :-) I need something that always works.

Quoted 15 lines
Quoted 14 lines
    def flash_edison(self, repo):
        vid = 0x8086
        pid = 0xe005
        expect = "%04x:%04x" % (vid, pid)
        self.wait_for_dfu(expect)
        u_boot = os.path.join(repo._local_str(), "u-boot-edison.img")
        bindir = self.usbboot_xfstk_dir
        self.host.exec0(
            "xfstk-dldr-solo", "--gpflags", "0x80000007",
            "--osimage", u_boot,
            "--fwdnx", os.path.join(bindir, "edison_dnx_fwr.bin"),
            "--fwimage", os.path.join(bindir, "edison_ifwi-dbg-00.bin"),
            "--osdnx", os.path.join(bindir, "edison_dnx_osr.bin"))
Quoted 6 lines
Quoted 1 line

To the topic, any suggestions on how to fix the current U-Boot regression?

The easiest thing is to use 'acpi list' and 'acpi dump facp' etc. to see what is different between the two commits. My testing was on coral and minnowmax and I must have missed it. We don't actually have any test coverage on the board-specific code.

Quoted 4 lines

=> acpi dump facp
Table 'FACP' not found

This explains I believe everything.

Side question(s):

- Why out of a sudden different name here:

    ACPI_WRITER(5fadt, "FACS", apl_write_fadt, 0);

FACS vs FACP

- Why do you need double assignment of the same revision in acpi_fadt_common()

    header->revision = 4;
    ...
    /* Use ACPI 3.0 revision */
    fadt->header.revision = 4;
Signature · 2 lines
With Best Regards,
Andy Shevchenko
#11 lore raw
In reply to Andy Shevchenko
Quoted 3 lines · Andy Shevchenko
Quoted 2 lines · Simon Glass
Quoted 1 line · Andy Shevchenko

On Fri, Feb 11, 2022 at 9:26 PM Simon Glass <[email protected]> wrote:

...

Quoted 11 lines
Quoted 6 lines
Quoted 1 line

To the topic, any suggestions on how to fix the current U-Boot regression?

The easiest thing is to use 'acpi list' and 'acpi dump facp' etc. to see what is different between the two commits. My testing was on coral and minnowmax and I must have missed it. We don't actually have any test coverage on the board-specific code.

=> acpi dump facp
Table 'FACP' not found

This explains I believe everything.

So, how is this ACPI_WRITER() supposed to work? Any documentation, please?

Signature · 2 lines
With Best Regards,
Andy Shevchenko
#12 lore raw
Quoted 14 lines · Andy Shevchenko
Quoted 3 lines · Andy Shevchenko
Quoted 2 lines · Simon Glass
Quoted 1 line · Andy Shevchenko

On Fri, Feb 11, 2022 at 9:26 PM Simon Glass <[email protected]> wrote:

...

Quoted 7 lines
Quoted 6 lines
Quoted 1 line

To the topic, any suggestions on how to fix the current U-Boot regression?

The easiest thing is to use 'acpi list' and 'acpi dump facp' etc. to see what is different between the two commits. My testing was on coral and minnowmax and I must have missed it. We don't actually have any test coverage on the board-specific code.

Quoted 6 lines
Quoted 4 lines

=> acpi dump facp
Table 'FACP' not found

This explains I believe everything.

So, how is this ACPI_WRITER() supposed to work? Any documentation, please?

So. what's news here, please?

Signature · 2 lines
With Best Regards,
Andy Shevchenko
#13 lore raw
In reply to Tom Rini

Hi,

Quoted 6 lines · Tom Rini

Hey all,

It's release day and so here's v2022.04-rc1. While there's much in here that needed to come in, there's a few big things outstanding, including but not limited to i.MX and layerscape syncs and further sunxi changes.

Quoted 8 lines

In terms of a changelog,
git log --merges v2022.01..v2022.04-rc1
contains what I've pulled but as always, better PR messages and tags will provide better results here.

So we're now looking at regular releases every other Monday, and with final release on April 4th, 2022. Thanks all!

I also found that this patch break ZynqMP boards. I didn't have a time to dig into it more. Just did a bisect to find out what's going on. 985503439762 ("fdt: Don't call board_fdt_blob_setup() without OF_BOARD")

Thanks,
Michal

Signature · 5 lines
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Xilinx Microblaze
Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs
U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs