cxl/regs: Fix size of CXL Capability Header Register
PATCH 1/1 cxl/regs: Fix size of CXL Capability Header Register
In CXL 2.0, 8.2.5.1 CXL Capability Header Register: this register is given as 32 bits.
8.2.3 which covers the CXL 2.0 Component registers, including the CXL Capability Header Register states that access restrictions specified in Section 8.2.2 apply.
8.2.2 includes:
* A 32 bit register shall be accessed as a 4 Byte quantity.
...
If these rules are not followed, the behavior is undefined.
Discovered during review of CXL QEMU emulation. Alex Bennée pointed out there was a comment saying that 4 byte registers must be read with a 4 byte read, but 8 byte reads were being emulated.
https://lore.kernel.org/qemu-devel/[email protected]/
Fixing that, led to this code failing. Whilst a given hardware implementation 'might' work with an 8 byte read, it should not be relied upon. The QEMU emulation v5 will return 0 and log the wrong access width.
The code moved, so one fixes tag for where this will directly apply and also a reference to the earlier introduction of the code for backports.
--- drivers/cxl/core/regs.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/cxl/core/regs.c +2 -2
@@ -35,7 +35,7 @@ void cxl_probe_component_regs(struct device *dev, void __iomem *base, struct cxl_component_reg_map *map) {int cap, cap_count; -u64 cap_array; +u32 cap_array; *map = (struct cxl_component_reg_map ) {0 };
@@ -45,7 +45,7 @@ void cxl_probe_component_regs(struct device *dev, void __iomem *base,*/ base +=CXL_CM_OFFSET ; - cap_array =readq (base +CXL_CM_CAP_HDR_OFFSET ); + cap_array =readl (base +CXL_CM_CAP_HDR_OFFSET );if (FIELD_GET (CXL_CM_CAP_HDR_ID_MASK , cap_array) !=CM_CAP_HDR_CAP_ID ) { dev_err(dev,
Signature · 1 line
2.32.0
Quoted 22 lines · Jonathan Cameron
In CXL 2.0, 8.2.5.1 CXL Capability Header Register: this register is given as 32 bits.
8.2.3 which covers the CXL 2.0 Component registers, including the CXL Capability Header Register states that access restrictions specified in Section 8.2.2 apply.
8.2.2 includes:
* A 32 bit register shall be accessed as a 4 Byte quantity.
...
If these rules are not followed, the behavior is undefined.Discovered during review of CXL QEMU emulation. Alex Bennée pointed out there was a comment saying that 4 byte registers must be read with a 4 byte read, but 8 byte reads were being emulated.
https://lore.kernel.org/qemu-devel/[email protected]/
Fixing that, led to this code failing. Whilst a given hardware implementation 'might' work with an 8 byte read, it should not be relied upon. The QEMU emulation v5 will return 0 and log the wrong access width.
Quoted 7 lines
The code moved, so one fixes tag for where this will directly apply and also a reference to the earlier introduction of the code for backports.
Fixes 0f06157e0135 ("cxl/core: Move register mapping infrastructure")Fixes 08422378c4ad ("cxl/pci: Add HDM decoder capabilities")Signed-off-by Jonathan Cameron <[email protected]>Cc Alex Bennée <[email protected]>
oops.
[snip]