clk: qcom: clk-rcg2: Update the calc_rate logic to handle determine rate
Subsystems (3)
PATCH v2 1/2 clk: qcom: clk-rcg2: Update the calc_rate logic to handle determine rate
In the cases where the RCG parent implements the determine rate ops, the calc_rate needs to be updated the calculate the rate.
---
* Split the patch for PLL and RCG.
* Update the Fixes tag.
drivers/clk/qcom/clk-rcg2.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
drivers/clk/qcom/clk-rcg2.c +5 -5
@@ -147,19 +147,19 @@ static int clk_rcg2_set_parent(struct clk_hw *hw, u8 index)static unsigned long calc_rate (unsigned long rate,u32 m,u32 n,u32 mode,u32 hid_div) { +u64 tmp = rate; +if (hid_div) { - rate *=2 ; - rate /= hid_div +1 ; + tmp *=2 ; +do_div (tmp, hid_div +1 ); }if (mode) { -u64 tmp = rate; tmp *= m;do_div (tmp, n); - rate = tmp; } -return rate; +return tmp; } static unsigned long
--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member of the Code Aurora Forum, hosted by the Linux Foundation.
PATCH v2 2/2 clk: qcom: clk-alpha-pll: Update to use determine rate ops for PLL
On 32 bit devices, where the PLL requires to support the frequency beyond the range of the long int the round rate ops cannot support. Thus update the clk_ops to use determine rate instead.
--- drivers/clk/qcom/clk-alpha-pll.c | 21 +++++++++++++++++---- 1 file changed, 17 insertions(+), 4 deletions(-)
drivers/clk/qcom/clk-alpha-pll.c +17 -4
@@ -812,12 +812,25 @@ static int alpha_pll_huayra_set_rate(struct clk_hw *hw, unsigned long rate,return 0 ; } -static long alpha_pll_huayra_round_rate (struct clk_hw *hw,unsigned long rate, -unsigned long *prate) +static int alpha_pll_huayra_determine_rate (struct clk_hw *hw, +struct clk_rate_request *req) { +struct clk_hw *parent_hw; +unsigned long rrate, prate;u32 l, a; -return alpha_huayra_pll_round_rate (rate, *prate, &l, &a); + parent_hw =clk_hw_get_parent (hw); +if (!parent_hw) +return -EINVAL ; + + prate =clk_hw_get_rate (parent_hw); + rrate =alpha_huayra_pll_round_rate (req->rate, prate, &l, &a); + + req->best_parent_hw = parent_hw; + req->best_parent_rate = prate; + req->rate = rrate; + +return 0 ; } static int trion_pll_is_enabled(struct clk_alpha_pll *pll,
@@ -946,7 +959,7 @@ const struct clk_ops clk_alpha_pll_huayra_ops = { .disable = clk_alpha_pll_disable, .is_enabled = clk_alpha_pll_is_enabled, .recalc_rate = alpha_pll_huayra_recalc_rate, - .round_rate = alpha_pll_huayra_round_rate, + .determine_rate = alpha_pll_huayra_determine_rate, .set_rate = alpha_pll_huayra_set_rate, };EXPORT_SYMBOL_GPL (clk_alpha_pll_huayra_ops);
--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member of the Code Aurora Forum, hosted by the Linux Foundation.
Stephen Boyd
maintainerRe: [PATCH v2 2/2] clk: qcom: clk-alpha-pll: Update to use determine rate ops for PLL
Quoting Taniya Das (2022-02-02 09:42:13)
Quoted 9 lines
drivers/clk/qcom/clk-alpha-pll.c +0
-1@@ -812,12 +812,25 @@ static int alpha_pll_huayra_set_rate(struct clk_hw *hw, unsigned long rate,return 0 ; } -static long alpha_pll_huayra_round_rate(struct clk_hw *hw, unsigned long rate,
drivers/clk/qcom/clk-alpha-pll.c static int alpha_pll_huayra_set_rate(struct clk_hw *hw, unsigned long rate, · line 822
Quoted 10 lines
drivers/clk/qcom/clk-alpha-pll.c +5
-2- unsigned long *prate) +static int alpha_pll_huayra_determine_rate (struct clk_hw *hw, +struct clk_rate_request *req) { +struct clk_hw *parent_hw; +unsigned long rrate, prate;u32 l, a; -return alpha_huayra_pll_round_rate (rate, *prate, &l, &a); + parent_hw =clk_hw_get_parent (hw);
The clk_rate_request should already have the parent_hw pointer set in it. See clk_core_init_rate_req(). So there's no need to clk_hw_get_parent() again here.
drivers/clk/qcom/clk-alpha-pll.c static int alpha_pll_huayra_set_rate(struct clk_hw *hw, unsigned long rate, · line 826
Quoted 4 lines
drivers/clk/qcom/clk-alpha-pll.c +4
-0+if (!parent_hw) +return -EINVAL ; + + prate =clk_hw_get_rate (parent_hw);
And low and behold the parent rate is also prepopulated in 'req'. Just use that.
drivers/clk/qcom/clk-alpha-pll.c static int alpha_pll_huayra_set_rate(struct clk_hw *hw, unsigned long rate, · line 829
Quoted 3 lines
drivers/clk/qcom/clk-alpha-pll.c +3
-0+ rrate =alpha_huayra_pll_round_rate (req->rate, prate, &l, &a); + + req->best_parent_hw = parent_hw;
Remove.
drivers/clk/qcom/clk-alpha-pll.c static int alpha_pll_huayra_set_rate(struct clk_hw *hw, unsigned long rate, · line 830
Quoted 1 line
drivers/clk/qcom/clk-alpha-pll.c +1
-0+ req->best_parent_rate = prate;
Remove.
drivers/clk/qcom/clk-alpha-pll.c static int alpha_pll_huayra_set_rate(struct clk_hw *hw, unsigned long rate, · line 831
Quoted 1 line
drivers/clk/qcom/clk-alpha-pll.c +1
-0+ req->rate = rrate;
Keep.
req->rate = alpha_pll_huayra_round_rate(req->rate, prate, &l, &a);
Quoted 5 lines
drivers/clk/qcom/clk-alpha-pll.c +2
-0+ +return 0 ; } static int trion_pll_is_enabled(struct clk_alpha_pll *pll,
Stephen Boyd
maintainerQuoting Taniya Das (2022-02-02 09:42:12)
Quoted 2 lines
In the cases where the RCG parent implements the determine rate ops, the
calc_rateneeds to be updated the calculate the rate.
I don't follow. Do you mean in cases where 'rate' is close to 32-bits and we're running on a CPU with sizeof(long) == u32?
Quoted 15 lines
Fixes bcd61c0f535a0 ("clk: qcom: Add support for root clock generators (RCGs)")Signed-off-by Taniya Das <[email protected]>---
* Split the patch for PLL and RCG.
* Update the Fixes tag.drivers/clk/qcom/clk-rcg2.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)drivers/clk/qcom/clk-rcg2.c +0
-0
drivers/clk/qcom/clk-rcg2.c static int clk_rcg2_set_parent(struct clk_hw *hw, u8 index) · line 150
Quoted 4 lines
drivers/clk/qcom/clk-rcg2.c +1
-0@@ -147,19 +147,19 @@ static int clk_rcg2_set_parent(struct clk_hw *hw, u8 index)static unsigned long calc_rate (unsigned long rate,u32 m,u32 n,u32 mode,u32 hid_div) { +u64 tmp = rate;
Call it u64 calced_rate or u64 calculated?
drivers/clk/qcom/clk-rcg2.c static int clk_rcg2_set_parent(struct clk_hw *hw, u8 index) · line 154
Quoted 6 lines
drivers/clk/qcom/clk-rcg2.c +3
-2+if (hid_div) { - rate *=2 ; - rate /= hid_div +1 ; + tmp *=2 ; +do_div (tmp, hid_div +1 );
Can this use div_u64()?
drivers/clk/qcom/clk-rcg2.c static int clk_rcg2_set_parent(struct clk_hw *hw, u8 index) · line 159
Quoted 6 lines
drivers/clk/qcom/clk-rcg2.c +0
-1}if (mode) { -u64 tmp = rate; tmp *= m;do_div (tmp, n);
This can probably use div_u64() as well. Do that first in a different patch and then put this patch on top please.
Quoted 6 lines
drivers/clk/qcom/clk-rcg2.c +1
-2- rate = tmp; } -return rate; +return tmp; }