arm64: dts: rockchip: rk3399-firefly: enable the mali GPU
Subsystems (2)
PATCH v2 1/1 arm64: dts: rockchip: rk3399-firefly: enable the mali GPU
The Firefly RK3399 device tree had the GPU status set to disabled as per the default from the rk3399.dtsi. This patch sets the status in the firefly dts to enable it for use. Tested successfully on a 2GB Firefly RK3399 board.
Signed-off-by Michael Saunders <[email protected]>
---
This should correct the issues raised in the first patch. Thanks Krzysztof for your feedback and patience.
arch/arm64/boot/dts/rockchip/rk3399-firefly.dts | 5 +++++ 1 file changed, 5 insertions(+)
arch/arm64/boot/dts/rockchip/rk3399-firefly.dts +5 -0
@@ -298,6 +298,11 @@ &gmac { status = "okay"; }; +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + &hdmi { ddc-i2c-bus = <&i2c3>; pinctrl-names = "default";
Signature · 7 lines
2.35.1 _______________________________________________ Linux-rockchip mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-rockchip
Quoted 4 lines · Michael Saunders
The Firefly RK3399 device tree had the GPU status set to disabled as per the default from the
rk3399.dtsi. This patch sets the status in the firefly dts to enable it for use. Tested successfully on a 2GB Firefly RK3399 board.
Applied, thanks!
[1/1] arm64: dts: rockchip: rk3399-firefly: enable the mali GPU
Best regards,
Signature · 1 line
Heiko Stuebner <[email protected]>