ARM: dts: imx6dl: Add a label to cpu1 node
Subsystems (2)
PATCH RESEND 1/2 ARM: dts: imx6dl: Add a label to cpu1 node
The cpu1 is missing a label for further reference. Since cpu0 has already a label, add also one for cpu1 node, so it can be referenced to add or modify cpu specific properties the same way as cpu0.
--- arch/arm/boot/dts/imx6dl.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/imx6dl.dtsi +1 -1
@@ -48,7 +48,7 @@ cpu0: cpu@0 { nvmem-cell-names = "speed_grade"; }; - cpu@1 { + cpu1: cpu@1 { compatible = "arm,cortex-a9"; device_type = "cpu"; reg = <1>;
Signature · 1 line
2.25.1
PATCH RESEND 2/2 ARM: dts: imx6qdl: phycore-som: Add custom volt/freq table
The PHYTEC phyCORE-i.MX6QDL SOM-modules are operating with a slightly different voltage and frequency values in contrast to the generic i.MX6Q/DL tables. The values have been adjusted to achieve the most stable condition for the PHYTEC-modules. Introduce imx6q- and imx6dl-phycore dtsi files with the modified power tables.
--- .../boot/dts/imx6dl-phytec-mira-rdk-nand.dts | 2 +- .../boot/dts/imx6dl-phytec-phycore-som.dtsi | 25 ++++++ .../boot/dts/imx6q-phytec-mira-rdk-emmc.dts | 2 +- .../boot/dts/imx6q-phytec-mira-rdk-nand.dts | 2 +- .../boot/dts/imx6q-phytec-phycore-som.dtsi | 83 +++++++++++++++++++ 5 files changed, 111 insertions(+), 3 deletions(-) create mode 100644 arch/arm/boot/dts/imx6dl-phytec-phycore-som.dtsi create mode 100644 arch/arm/boot/dts/imx6q-phytec-phycore-som.dtsi
arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts +1 -1
@@ -6,7 +6,7 @@ /dts-v1/; #include "imx6dl.dtsi" -#include "imx6qdl-phytec-phycore-som.dtsi" +#include "imx6dl-phytec-phycore-som.dtsi" #include "imx6qdl-phytec-mira.dtsi" #include "imx6qdl-phytec-mira-peb-eval-01.dtsi" #include "imx6qdl-phytec-mira-peb-av-02.dtsi"
arch/arm/boot/dts/imx6dl-phytec-phycore-som.dtsi new file +25 -0
@@ -0,0 +1,25 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2021 PHYTEC Messtechnik GmbH + * Author: Yunus Bas <[email protected]> + */ + +#include "imx6qdl-phytec-phycore-som.dtsi" + +&cpu0 { + operating-points = < + /* kHz uV */ + 996000 1275000 + 792000 1175000 + 396000 1150000 + >; +}; + +&cpu1 { + operating-points = < + /* kHz uV */ + 996000 1275000 + 792000 1175000 + 396000 1150000 + >; +};
arch/arm/boot/dts/imx6q-phytec-mira-rdk-emmc.dts +1 -1
@@ -6,7 +6,7 @@ /dts-v1/; #include "imx6q.dtsi" -#include "imx6qdl-phytec-phycore-som.dtsi" +#include "imx6q-phytec-phycore-som.dtsi" #include "imx6qdl-phytec-mira.dtsi" #include "imx6qdl-phytec-mira-peb-eval-01.dtsi" #include "imx6qdl-phytec-mira-peb-av-02.dtsi"
arch/arm/boot/dts/imx6q-phytec-mira-rdk-nand.dts +1 -1
@@ -6,7 +6,7 @@ /dts-v1/; #include "imx6q.dtsi" -#include "imx6qdl-phytec-phycore-som.dtsi" +#include "imx6q-phytec-phycore-som.dtsi" #include "imx6qdl-phytec-mira.dtsi" #include "imx6qdl-phytec-mira-peb-eval-01.dtsi" #include "imx6qdl-phytec-mira-peb-av-02.dtsi"
arch/arm/boot/dts/imx6q-phytec-phycore-som.dtsi new file +83 -0
83 lines not on this page · raw message
Signature · 1 line
2.25.1
Re: [PATCH RESEND 2/2] ARM: dts: imx6qdl: phycore-som: Add custom volt/freq table
Quoted 41 lines · Yunus Bas
The PHYTEC phyCORE-i.MX6QDL SOM-modules are operating with a slightly different voltage and frequency values in contrast to the generic i.MX6Q/DL tables. The values have been adjusted to achieve the most stable condition for the PHYTEC-modules. Introduce imx6q- and imx6dl-phycore dtsi files with the modified power tables.
Signed-off-by Yunus Bas <[email protected]>--- .../boot/dts/imx6dl-phytec-mira-rdk-nand.dts | 2 +- .../boot/dts/imx6dl-phytec-phycore-som.dtsi | 25 ++++++ .../boot/dts/imx6q-phytec-mira-rdk-emmc.dts | 2 +- .../boot/dts/imx6q-phytec-mira-rdk-nand.dts | 2 +- .../boot/dts/imx6q-phytec-phycore-som.dtsi | 83 +++++++++++++++++++ 5 files changed, 111 insertions(+), 3 deletions(-) create mode 100644 arch/arm/boot/dts/imx6dl-phytec-phycore-som.dtsi create mode 100644 arch/arm/boot/dts/imx6q-phytec-phycore-som.dtsiarch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts +1
-1@@ -6,7 +6,7 @@ /dts-v1/; #include "imx6dl.dtsi" -#include "imx6qdl-phytec-phycore-som.dtsi" +#include "imx6dl-phytec-phycore-som.dtsi" #include "imx6qdl-phytec-mira.dtsi" #include "imx6qdl-phytec-mira-peb-eval-01.dtsi" #include "imx6qdl-phytec-mira-peb-av-02.dtsi"arch/arm/boot/dts/imx6dl-phytec-phycore-som.dtsi new file +5
-0@@ -0,0 +1,25 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2021 PHYTEC Messtechnik GmbH + * Author: Yunus Bas <[email protected]> + */
arch/arm/boot/dts/imx6dl-phytec-phycore-som.dtsi line 15
Quoted 10 lines
arch/arm/boot/dts/imx6dl-phytec-phycore-som.dtsi new file +10
-0+ +#include "imx6qdl-phytec-phycore-som.dtsi" + +&cpu0 { + operating-points = < + /* kHz uV */ + 996000 1275000 + 792000 1175000 + 396000 1150000 + >;
Check Documentation/devicetree/bindings/opp/opp-v1.yaml to see how this property should be coded properly.
Shawn
Quoted 128 lines
arch/arm/boot/dts/imx6dl-phytec-phycore-som.dtsi new file +10
-0+}; + +&cpu1 { + operating-points = < + /* kHz uV */ + 996000 1275000 + 792000 1175000 + 396000 1150000 + >; +};arch/arm/boot/dts/imx6q-phytec-mira-rdk-emmc.dts +1
-1@@ -6,7 +6,7 @@ /dts-v1/; #include "imx6q.dtsi" -#include "imx6qdl-phytec-phycore-som.dtsi" +#include "imx6q-phytec-phycore-som.dtsi" #include "imx6qdl-phytec-mira.dtsi" #include "imx6qdl-phytec-mira-peb-eval-01.dtsi" #include "imx6qdl-phytec-mira-peb-av-02.dtsi"arch/arm/boot/dts/imx6q-phytec-mira-rdk-nand.dts +1
-1@@ -6,7 +6,7 @@ /dts-v1/; #include "imx6q.dtsi" -#include "imx6qdl-phytec-phycore-som.dtsi" +#include "imx6q-phytec-phycore-som.dtsi" #include "imx6qdl-phytec-mira.dtsi" #include "imx6qdl-phytec-mira-peb-eval-01.dtsi" #include "imx6qdl-phytec-mira-peb-av-02.dtsi"arch/arm/boot/dts/imx6q-phytec-phycore-som.dtsi new file +83
-0@@ -0,0 +1,83 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2021 PHYTEC Messtechnik GmbH + * Author: Yunus Bas <[email protected]> + */ + +#include "imx6qdl-phytec-phycore-som.dtsi" + +&cpu0 { + operating-points = < + /* KHz uV */ + 1200000 1300000 + 996000 1250000 + 852000 1250000 + 792000 1175000 + 396000 1075000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC-PU uV */ + 1200000 1275000 + 996000 1250000 + 852000 1250000 + 792000 1250000 + 396000 1250000 + >; +}; + +&cpu1 { + operating-points = < + /* KHz uV */ + 1200000 1300000 + 996000 1250000 + 852000 1250000 + 792000 1175000 + 396000 1075000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC-PU uV */ + 1200000 1275000 + 996000 1250000 + 852000 1250000 + 792000 1250000 + 396000 1250000 + >; +}; + +&cpu2 { + operating-points = < + /* KHz uV */ + 1200000 1300000 + 996000 1250000 + 852000 1250000 + 792000 1175000 + 396000 1075000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC-PU uV */ + 1200000 1275000 + 996000 1250000 + 852000 1250000 + 792000 1250000 + 396000 1250000 + >; +}; + +&cpu3 { + operating-points = < + /* KHz uV */ + 1200000 1300000 + 996000 1250000 + 852000 1250000 + 792000 1175000 + 396000 1075000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC-PU uV */ + 1200000 1275000 + 996000 1250000 + 852000 1250000 + 792000 1250000 + 396000 1250000 + >; +};Signature · 1 line
2.25.1