pinctrl: starfive: Use a static name for the GPIO irq_chip
Subsystems (2)
PATCH 1/1 pinctrl: starfive: Use a static name for the GPIO irq_chip
Drop the device name used for the GPIO irq_chip and replace it with something static. The information is still available from debugfs and carried as part of the irqdomain.
Suggested-by Emil Renner Berthing <[email protected]>
Signed-off-by Marc Zyngier <[email protected]>
Cc Linus Walleij <[email protected]>
Cc Bartosz Golaszewski <[email protected]>
--- drivers/pinctrl/pinctrl-starfive.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/pinctrl/pinctrl-starfive.c +1 -1
@@ -1164,6 +1164,7 @@ static int starfive_irq_set_type(struct irq_data *d, unsigned int trigger) }static struct irq_chip starfive_irq_chip = { + .name ="StarFive GPIO" , .irq_ack = starfive_irq_ack, .irq_mask = starfive_irq_mask, .irq_mask_ack = starfive_irq_mask_ack,
@@ -1308,7 +1309,6 @@ static int starfive_probe(struct platform_device *pdev) sfp->gc.ngpio =NR_GPIOS ; starfive_irq_chip.parent_device = dev; - starfive_irq_chip.name = sfp->gc.label; sfp->gc.irq.chip = &starfive_irq_chip; sfp->gc.irq.parent_handler = starfive_gpio_irq_handler;
Signature · 1 line
2.34.1
Quoted 8 lines · Marc Zyngier
Drop the device name used for the GPIO
irq_chipand replace it with something static. The information is still available from debugfs and carried as part of the irqdomain.Suggested-by Emil Renner Berthing <[email protected]>Signed-off-by Marc Zyngier <[email protected]>Cc Linus Walleij <[email protected]>Cc Bartosz Golaszewski <[email protected]>
Applied for fixes!
Yours,
Linus Walleij