arm: kasan: support CONFIG_KASAN_VMALLOC
Subsystems (2)
v2 cover arm: kasan: support CONFIG_KASAN_VMALLOC
Since the framework of KASAN_VMALLOC is well-developed, It's easy to support for ARM that simply not to map shadow of VMALLOC area on kasan_init.
This can fix ARM_MODULE_PLTS with KASAN and provide first step to support CONFIG_VMAP_STACK in ARM.
Patch base on v5.16
Test on
1. Qemu with memory 2G and vmalloc=500M for 3G/1G mapping.
2. Qemu with memory 2G and vmalloc=500M for 3G/1G mapping + LPAE.
3. Qemu with memory 2G and vmalloc=500M for 2G/2G mapping.
v2:
rebase on 5.17-rc3
Lecopzer Chen (2):
arm: kasan: support CONFIG_KASAN_VMALLOC
arm: kconfig: fix MODULE_PLTS for KASAN with KASAN_VMALLOC
arch/arm/Kconfig | 2 ++ arch/arm/mm/kasan_init.c | 6 +++++- 2 files changed, 7 insertions(+), 1 deletion(-)
Signature · 1 line
2.25.1
PATCH v2 1/2 arm: kasan: support CONFIG_KASAN_VMALLOC
Simply make shadow of vmalloc area mapped on demand.
This can fix ARM_MODULE_PLTS with KASAN and provide first step to support CONFIG_VMAP_STACK in ARM.
--- arch/arm/Kconfig | 1 + arch/arm/mm/kasan_init.c | 6 +++++- 2 files changed, 6 insertions(+), 1 deletion(-)
arch/arm/Kconfig +1 -0
@@ -72,6 +72,7 @@ config ARM select HAVE_ARCH_KFENCE if MMU && !XIP_KERNEL select HAVE_ARCH_KGDB if !CPU_ENDIAN_BE32 && MMU select HAVE_ARCH_KASAN if MMU && !XIP_KERNEL + select HAVE_ARCH_KASAN_VMALLOC if HAVE_ARCH_KASAN select HAVE_ARCH_MMAP_RND_BITS if MMU select HAVE_ARCH_PFN_VALID select HAVE_ARCH_SECCOMP
arch/arm/mm/kasan_init.c +5 -1
@@ -236,7 +236,11 @@ void __init kasan_init(void)clear_pgds (KASAN_SHADOW_START ,KASAN_SHADOW_END ); -kasan_populate_early_shadow (kasan_mem_to_shadow ((void *)VMALLOC_START ), +if (!IS_ENABLED (CONFIG_KASAN_VMALLOC )) +kasan_populate_early_shadow (kasan_mem_to_shadow ((void *)VMALLOC_START ), +kasan_mem_to_shadow ((void *)VMALLOC_END )); + +kasan_populate_early_shadow (kasan_mem_to_shadow ((void *)VMALLOC_END ),kasan_mem_to_shadow ((void *)-1UL ) +1 );for_each_mem_range (i, &pa_start, &pa_end) {
Signature · 1 line
2.25.1
Hi Lecopzer,
thanks for working on this! I need this support too.
Quoted 6 lines · Lecopzer Chen
Simply make shadow of vmalloc area mapped on demand.
This can fix
ARM_MODULE_PLTSwith KASAN and provide first step to supportCONFIG_VMAP_STACKin ARM.Signed-off-by Lecopzer Chen <[email protected]>
(...)
arch/arm/mm/kasan_init.c void __init kasan_init(void) · line 244
Quoted 7 lines
arch/arm/mm/kasan_init.c +5
-1-kasan_populate_early_shadow (kasan_mem_to_shadow ((void *)VMALLOC_START ), +if (!IS_ENABLED (CONFIG_KASAN_VMALLOC )) +kasan_populate_early_shadow (kasan_mem_to_shadow ((void *)VMALLOC_START ), +kasan_mem_to_shadow ((void *)VMALLOC_END )); + +kasan_populate_early_shadow (kasan_mem_to_shadow ((void *)VMALLOC_END ),kasan_mem_to_shadow ((void *)-1UL ) +1 );
Where is this actually mapped?
Can you print out where kasan_mem_to_shadow((void *)VMALLOC_START) kasan_mem_to_shadow((void *)VMALLOC_END) as well as KASAN_SHADOW_START and KASAN_SHADOW_END points?
When I looked into this getting the shadow memory between KASAN_SHADOW_START and KASAN_SHADOW_END
seemed like the big problem since this is static, so how is Kasan solving this now?
Please patch the picture ininclude/asm/kasan_def.h
and the info inDocumentation/arm/memory.rst
so it clearly reflects where VMALLOC is shadowed.
Yours,
Linus Walleij
Hi Linus
Thanks for your review.
Quoted 16 lines
arch/arm/mm/kasan_init.c void __init kasan_init(void) · line 244
Quoted 7 lines
arch/arm/mm/kasan_init.c +5
-1-kasan_populate_early_shadow (kasan_mem_to_shadow ((void *)VMALLOC_START ), +if (!IS_ENABLED (CONFIG_KASAN_VMALLOC )) +kasan_populate_early_shadow (kasan_mem_to_shadow ((void *)VMALLOC_START ), +kasan_mem_to_shadow ((void *)VMALLOC_END )); + +kasan_populate_early_shadow (kasan_mem_to_shadow ((void *)VMALLOC_END ),kasan_mem_to_shadow ((void *)-1UL ) +1 );Where is this actually mapped?
Can you print out where
kasan_mem_to_shadow((void *)VMALLOC_START)kasan_mem_to_shadow((void *)VMALLOC_END)as well asKASAN_SHADOW_STARTandKASAN_SHADOW_ENDpoints?
Quoted 4 lines
When I looked into this getting the shadow memory between
KASAN_SHADOW_STARTandKASAN_SHADOW_END
seemed like the big problem since this is static, so how is Kasan solving this now?
For quick answer:
As I knwon, the definition of KASAN_SHADOW_START and END
(@arch/arm/include/asm/kasan_def.h)
* 1) KASAN_SHADOW_START
* This value begins with the MODULE_VADDR's shadow address. It is the
* start of kernel virtual space....
*
* 2) KASAN_SHADOW_END
* This value is the 0x100000000's shadow address: the mapping that would
* be after the end of the kernel memory at 0xffffffff....
and the virt address of vmalloc for ARM32 is also between MODULE_VADDR and 0x100000000 (ZONE_HIGHMEM), so nothing needs to do.
If there is any cases may break this assumption, please correct me, thanks.
Quoted 6 lines
Please patch the picture in
include/asm/kasan_def.h
and the info inDocumentation/arm/memory.rst
so it clearly reflects where VMALLOC is shadowed.
Thanks for suggestion, Yes, we really do need to update doc for memory layout. I'll study how to add it and provide in v3.
PATCH v2 2/2 arm: kconfig: fix MODULE_PLTS for KASAN with KASAN_VMALLOC
In reply to Lecopzer ChenWhen we run out of module space address with ko insertion, and with MODULE_PLTS, module would turn to try to find memory from VMALLOC address space.
Unfortunately, with KASAN enabled, VMALLOC doesn't work without KASAN_VMALLOC, thus select KASAN_VMALLOC by default.
8<--- cut here ---
Unable to handle kernel paging request at virtual address bd300860 [bd300860] *pgd=41cf1811, *pte=41cf26df, *ppte=41cf265f Internal error: Oops: 80f [#1] PREEMPT SMP ARM Modules linked in: hello(O+) CPU: 0 PID: 89 Comm: insmod Tainted: G O 5.16.0-rc6+ #19 Hardware name: Generic DT based system PC is at mmioset+0x30/0xa8 LR is at 0x0 pc : [<c077ed30>] lr : [<00000000>] psr: 20000013 sp : c451fc18 ip : bd300860 fp : c451fc2c r10: f18042cc r9 : f18042d0 r8 : 00000000 r7 : 00000001 r6 : 00000003 r5 : 01312d00 r4 : f1804300 r3 : 00000000 r2 : 00262560 r1 : 00000000 r0 : bd300860 Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 43e9406a DAC: 00000051 Register r0 information: non-paged memory Register r1 information: NULL pointer Register r2 information: non-paged memory Register r3 information: NULL pointer Register r4 information: 4887-page vmalloc region starting at 0xf1802000 allocated at load_module+0x14f4/0x32a8 Register r5 information: non-paged memory Register r6 information: non-paged memory Register r7 information: non-paged memory Register r8 information: NULL pointer Register r9 information: 4887-page vmalloc region starting at 0xf1802000 allocated at load_module+0x14f4/0x32a8 Register r10 information: 4887-page vmalloc region starting at 0xf1802000 allocated at load_module+0x14f4/0x32a8 Register r11 information: non-slab/vmalloc memory Register r12 information: non-paged memory Process insmod (pid: 89, stack limit = 0xc451c000) Stack: (0xc451fc18 to 0xc4520000) fc00: f18041f0 c04803a4 fc20: c451fc44 c451fc30 c048053c c0480358 f1804030 01312cff c451fc64 c451fc48 fc40: c047f330 c0480500 f18040c0 c1b52ccc 00000001 c5be7700 c451fc74 c451fc68 fc60: f1802098 c047f300 c451fcb4 c451fc78 c026106c f180208c c4880004 00000000 fc80: c451fcb4 bf001000 c044ff48 c451fec0 f18040c0 00000000 c1b54cc4 00000000 fca0: c451fdf0 f1804268 c451fe64 c451fcb8 c0264e88 c0260d48 ffff8000 00007fff fcc0: f18040c0 c025cd00 c451fd14 00000003 0157f008 f1804258 f180425c f1804174 fce0: f1804154 f180424c f18041f0 f180414c f1804178 f18041c0 bf0025d4 188a3fa8 fd00: 0000009e f1804170 f2b18000 c451ff10 c0d92e40 f180416c c451feec 00000001 fd20: 00000000 c451fec8 c451fe20 c451fed0 f18040cc 00000000 f17ea000 c451fdc0 fd40: 41b58ab3 c1387729 c0261c28 c047fb5c c451fe2c c451fd60 c0525308 c048033c fd60: 188a3fb4 c3ccb090 c451fe00 c3ccb080 00000000 00000000 00016920 00000000 fd80: c02d0388 c047f55c c02d0388 00000000 c451fddc c451fda0 c02d0388 00000000 fda0: 41b58ab3 c13a72d0 c0524ff0 c1705f48 c451fdfc c451fdc0 c02d0388 c047f55c fdc0: 00016920 00000000 00000003 c1bb2384 c451fdfc c3ccb080 c1bb2384 00000000 fde0: 00000000 00000000 00000000 00000000 c451fe1c c451fe00 c04e9d70 c1705f48 fe00: c1b54cc4 c1bbc71c c3ccb080 00000000 c3ccb080 00000000 00000003 c451fec0 fe20: c451fe64 c451fe30 c0525918 c0524ffc c451feb0 c1705f48 00000000 c1b54cc4 fe40: b78a3fd0 c451ff60 00000000 0157f008 00000003 c451fec0 c451ffa4 c451fe68 fe60: c0265480 c0261c34 c451feb0 7fffffff 00000000 00000002 00000000 c4880000 fe80: 41b58ab3 c138777b c02652cc c04803ec 000a0000 c451ff00 ffffff9c b6ac9f60 fea0: c451fed4 c1705f48 c04a4a90 b78a3fdc f17ea000 ffffff9c b6ac9f60 c0100244 fec0: f17ea21a f17ea300 f17ea000 00016920 f1800240 f18000ac f17fb7dc 01316000 fee0: 013161b0 00002590 01316250 00000000 00000000 00000000 00002580 00000029 ff00: 0000002a 00000013 00000000 0000000c 00000000 00000000 0157f004 c451ffb0 ff20: c1719be0 aed6f410 c451ff74 c451ff38 c0c4103c c0c407d0 c451ff84 c451ff48 ff40: 00000805 c02c8658 c1604230 c1719c30 00000805 0157f004 00000005 c451ffb0 ff60: c1719be0 aed6f410 c451ffac c451ff78 c0122130 c1705f48 c451ffac 0157f008 ff80: 00000006 0000005f 0000017b c0100244 c4880000 0000017b 00000000 c451ffa8 ffa0: c0100060 c02652d8 0157f008 00000006 00000003 0157f008 00000000 b6ac9f60 ffc0: 0157f008 00000006 0000005f 0000017b 00000000 00000000 aed85f74 00000000 ffe0: b6ac9cd8 b6ac9cc8 00030200 aecf2d60 a0000010 00000003 00000000 00000000 Backtrace: [<c048034c>] (kasan_poison) from [<c048053c>] (kasan_unpoison+0x48/0x5c) [<c04804f4>] (kasan_unpoison) from [<c047f330>] (__asan_register_globals+0x3c/0x64) r5:01312cff r4:f1804030 [<c047f2f4>] (__asan_register_globals) from [<f1802098>] (_sub_I_65535_1+0x18/0xf80 [hello]) r7:c5be7700 r6:00000001 r5:c1b52ccc r4:f18040c0 [<f1802080>] (_sub_I_65535_1 [hello]) from [<c026106c>] (do_init_module+0x330/0x72c) [<c0260d3c>] (do_init_module) from [<c0264e88>] (load_module+0x3260/0x32a8) r10:f1804268 r9:c451fdf0 r8:00000000 r7:c1b54cc4 r6:00000000 r5:f18040c0 r4:c451fec0 [<c0261c28>] (load_module) from [<c0265480>] (sys_finit_module+0x1b4/0x1e8) r10:c451fec0 r9:00000003 r8:0157f008 r7:00000000 r6:c451ff60 r5:b78a3fd0 r4:c1b54cc4 [<c02652cc>] (sys_finit_module) from [<c0100060>] (ret_fast_syscall+0x0/0x1c) Exception stack(0xc451ffa8 to 0xc451fff0) ffa0: 0157f008 00000006 00000003 0157f008 00000000 b6ac9f60 ffc0: 0157f008 00000006 0000005f 0000017b 00000000 00000000 aed85f74 00000000 ffe0: b6ac9cd8 b6ac9cc8 00030200 aecf2d60 r10:0000017b r9:c4880000 r8:c0100244 r7:0000017b r6:0000005f r5:00000006 r4:0157f008 Code: e92d4100 e1a08001 e1a0e003 e2522040 (a8ac410a) ---[ end trace df6e12843197b6f5 ]---
--- arch/arm/Kconfig | 1 + 1 file changed, 1 insertion(+)
arch/arm/Kconfig +1 -0
@@ -1515,6 +1515,7 @@ config ARCH_WANT_GENERAL_HUGETLB config ARM_MODULE_PLTS bool "Use PLTs to allow module memory to spill over into vmalloc area" depends on MODULES + select KASAN_VMALLOC if KASAN default y help Allocate PLTs when loading modules so that jumps and calls whose
Signature · 1 line
2.25.1