drm/mediatek: allow commands to be sent during video mode
Subsystems (3)
PATCH v3 1/1 drm/mediatek: allow commands to be sent during video mode
Mipi dsi panel drivers can use mipi_dsi_dcs_{set,get}_display_brightness() to request backlight changes.
This can be done during panel initialization (dsi is in command mode) or afterwards (dsi is in Video Mode).
When the DSI is in Video Mode, all commands are rejected.
Detect current DSI mode in mtk_dsi_host_transfer() and switch modes temporarily to allow commands to be sent.
---
Changes in v3:
- increase readability of code and use correct return variable (see
comment https://lore.kernel.org/linux-mediatek/[email protected]/)
Changes in v2:
- update commit message to be more descriptive
drivers/gpu/drm/mediatek/mtk_dsi.c | 33 ++++++++++++++++++++++-------- 1 file changed, 24 insertions(+), 9 deletions(-)
drivers/gpu/drm/mediatek/mtk_dsi.c +24 -9
@@ -891,24 +891,33 @@ static ssize_t mtk_dsi_host_transfer(struct mipi_dsi_host *host,u8 read_data[16 ];void *src_addr;u8 irq_flag =CMD_DONE_INT_FLAG ; +u32 dsi_mode; +int ret; -if (readl (dsi->regs +DSI_MODE_CTRL ) &MODE ) { -DRM_ERROR ("dsi engine is not command mode\n" ); -return -EINVAL ; + dsi_mode =readl (dsi->regs +DSI_MODE_CTRL ); +if (dsi_mode &MODE ) { +mtk_dsi_stop (dsi); + ret =mtk_dsi_switch_to_cmd_mode (dsi,VM_DONE_INT_FLAG ,500 ); +if (ret) + goto restore_dsi_mode; }if (MTK_DSI_HOST_IS_READ (msg->type)) irq_flag |=LPRX_RD_RDY_INT_FLAG ; -if (mtk_dsi_host_send_cmd (dsi, msg, irq_flag) <0 ) -return -ETIME ; + ret =mtk_dsi_host_send_cmd (dsi, msg, irq_flag); +if (ret) + goto restore_dsi_mode; -if (!MTK_DSI_HOST_IS_READ (msg->type)) -return 0 ; +if (!MTK_DSI_HOST_IS_READ (msg->type)) { + recv_cnt =0 ; + goto restore_dsi_mode; + }if (!msg->rx_buf) {DRM_ERROR ("dsi receive buffer size may be NULL\n" ); -return -EINVAL ; + ret = -EINVAL ; + goto restore_dsi_mode; }for (i =0 ; i <16 ; i++)
@@ -933,7 +942,13 @@ static ssize_t mtk_dsi_host_transfer(struct mipi_dsi_host *host,DRM_INFO ("dsi get %d byte data from the panel address(0x%x)\n" , recv_cnt, *((u8 *)(msg->tx_buf))); -return recv_cnt; +restore_dsi_mode: +if (dsi_mode &MODE ) { +mtk_dsi_set_mode (dsi); +mtk_dsi_start (dsi); + } + +return ret <0 ? ret: recv_cnt; }static const struct mipi_dsi_host_ops mtk_dsi_ops = {
--
2.35.1
Il 14/02/22 09:47, Julien STEPHAN ha scritto:
Quoted 73 lines
Mipi dsi panel drivers can use mipi_dsi_dcs_{set,get}_display_brightness() to request backlight changes.
This can be done during panel initialization (dsi is in command mode) or afterwards (dsi is in Video Mode).
When the DSI is in Video Mode, all commands are rejected.
Detect current DSI mode in
mtk_dsi_host_transfer()and switch modes temporarily to allow commands to be sent.Signed-off-by Julien STEPHAN <[email protected]>Signed-off-by Mattijs Korpershoek <[email protected]>---
Changes in v3:
- increase readability of code and use correct return variable (see
comment https://lore.kernel.org/linux-mediatek/[email protected]/)Changes in v2:
- update commit message to be more descriptivedrivers/gpu/drm/mediatek/mtk_dsi.c | 33 ++++++++++++++++++++++-------- 1 file changed, 24 insertions(+), 9 deletions(-)drivers/gpu/drm/mediatek/mtk_dsi.c +17
-8@@ -891,24 +891,33 @@ static ssize_t mtk_dsi_host_transfer(struct mipi_dsi_host *host,u8 read_data[16 ];void *src_addr;u8 irq_flag =CMD_DONE_INT_FLAG ; +u32 dsi_mode; +int ret; -if (readl (dsi->regs +DSI_MODE_CTRL ) &MODE ) { -DRM_ERROR ("dsi engine is not command mode\n" ); -return -EINVAL ; + dsi_mode =readl (dsi->regs +DSI_MODE_CTRL ); +if (dsi_mode &MODE ) { +mtk_dsi_stop (dsi); + ret =mtk_dsi_switch_to_cmd_mode (dsi,VM_DONE_INT_FLAG ,500 ); +if (ret) + goto restore_dsi_mode; }if (MTK_DSI_HOST_IS_READ (msg->type)) irq_flag |=LPRX_RD_RDY_INT_FLAG ; -if (mtk_dsi_host_send_cmd (dsi, msg, irq_flag) <0 ) -return -ETIME ; + ret =mtk_dsi_host_send_cmd (dsi, msg, irq_flag); +if (ret) + goto restore_dsi_mode; -if (!MTK_DSI_HOST_IS_READ (msg->type)) -return 0 ; +if (!MTK_DSI_HOST_IS_READ (msg->type)) { + recv_cnt =0 ; + goto restore_dsi_mode; + }if (!msg->rx_buf) {DRM_ERROR ("dsi receive buffer size may be NULL\n" ); -return -EINVAL ; + ret = -EINVAL ; + goto restore_dsi_mode; }for (i =0 ; i <16 ; i++)@@ -933,7 +942,13 @@ static ssize_t mtk_dsi_host_transfer(struct mipi_dsi_host *host, DRM_INFO("dsi get %d byte data from the panel address(0x%x)\n",
drivers/gpu/drm/mediatek/mtk_dsi.c static ssize_t mtk_dsi_host_transfer(struct mipi_dsi_host *host, · line 951
Quoted 10 lines
drivers/gpu/drm/mediatek/mtk_dsi.c +7
-1recv_cnt, *((u8 *)(msg->tx_buf))); -return recv_cnt; +restore_dsi_mode: +if (dsi_mode &MODE ) { +mtk_dsi_set_mode (dsi); +mtk_dsi_start (dsi); + } + +return ret <0 ? ret: recv_cnt;
Nitpick: you've missed a space ... ret : recv_cnt;
With that fixed,
Quoted 6 lines
drivers/gpu/drm/mediatek/mtk_dsi.c +0
-1}static const struct mipi_dsi_host_ops mtk_dsi_ops = { --2.35.1